|
To search Listing, use Control F (PC), Command F (MAC)
Thursday, June 22, 2006 – 9:00AM |
SOUTH BEND LIMESTONE CO.
Spring Church, Pennsylvania |
Absolute Auction • COMPLETE LIQUIDATION-PHASE 1
|
NOTICE:
South Bend Limestone Company has completed mining of their Coleman Mine facility and has decided to liquidate the crushing, screening, and excess support equipment at that location. This is Phase I of their reclamation and liquidation program. Everything in the auction must sell to the highest bidder regardless of price! |
SALES TAX:
Since this contractors are selling items not normally sold in the course of business, the Commonwealth of Pennsylvania considers this an isolated sale and does not require the auction company to collect sales tax. |
REMOVAL:
After complete payment, all sale items may be removed on sale day as long as the removal activity is not disruptive to the sale and only until 5:00 p.m. Items may also be removed Friday, June 23 and Monday June 26 through Thursday, June 29 from 8:00 a.m. until 5:00 p.m. All items must be removed no later than Thursday, June 29, 2006 at 5:00 p.m. • Special Loadout Note: Mr. Darryl Jacobs, President of South Bend Limestone, had agreed to dismantle the aggregate plant components and load them for transportation at no fee to the purchaser. Please take this value added service into consideration.
|
PA AUCTION LICENSE NO.: AY000281 |
1 |
$275 |
BARNES 18ASE-1, 3" Electric Submersible Pump |
2 |
$10 |
HOMELITE 4" Gas Powered Trash Pump (Not Running) |
3 |
$10 |
HOMELITE 4" Gas Powered Trash Pump (Not Running) |
4 |
$225 |
GORMAN RUPP Model 1602-5034, 6" Portable Trash Pump, s/n 655143, powered by Detroit 3-71 diesel engine, equipped with 215/75R15 tires. In fair to good condition. (Pump End Good) (Water Pump and Oil Cooler Removed) |
4A |
$2,000 |
1999 CHEVROLET Model S10 Blazer, VIN# 1GNDT13W3X2150317, powered by Vortec V-6 gas engine and automatic transmission, equipped with power locks, power mirrors, tow package, AM/FM CD/Cassette, air conditioning, cruise control, and 235/75R15 tires. In good condition (No Catalytic Conveter) |
5 |
$250 |
1995 DODGE Model Ram 2500, 4x4 Pickup Truck, VIN# 1B7KF26Z0SS356495, powered by Magnum V-8 gas engine and automatic transmission, equipped with 8' bed, bed cap, and 245/75R16 tires. In poor condition with poor tires. (129,679 Miles) |
6 |
$850 |
1979 FORD Model F-600 Single Axle Bucket Truck, VIN# F60CVEJ1036, powered by V-8 gas engine and 4 speed transmission, equipped with Versalift model TEL28G telescopic aerial lift, fiberglass upper section, 300# capacity single man basket, and 8.25x20 tires. In poor condition with fair tires. (No Title) |
7 |
$175 |
SPECIAL CONSTRUCTION Tandem Axle Tag-A-Long Trailer, VIN# SW42728PA, equipped with 35' wooden deck, stake pockets, and 8x14.5 tires. In good condition with good tires. |
8 |
$1,000 |
GARDNER DENVER Model ATD3700 Pneumatic Track Drill, s/n 7183, powered by pneumatic drive motors, equipped with 19' mast, shopmade operators station, 9'4" crawlers, and 11" SBG pads. In fair to poor condition with fair undercarriage. |
9 |
$100 |
Drill Steel and Bits |
10 |
$2,750 |
GARDNER DENVER Model SP825, 825CFM Portable Air Compressor, s/n 709978, powered by Cat 3306 diesel engine, equipped with 8x22.5 tires. In fair condition with fair tires. |
11 |
$4,250 |
JOHN DEERE Model 510D Tractor Loader Backhoe, s/n 377745T, powered by John Deere 4 cylinder diesel engine and powershift transmission, equipped with general purpose loader bucket with weld-on cutting edge, 24" digging bucket, ROPS canopy, and 14.5/75x16.1 front and 18.4x28 rear tires. In fair condition with fair to good tires. (Reconditioned Hydraulic Pump) |
12 |
$400 |
Backhoe Boom, Stick, and Cylinder (John Deere) |
13 |
$250 |
36" Digging Bucket (John Deere) |
14 |
$1,400 |
Hydraulic Demo Hammer (John Deere 510) |
15 |
$225 |
(2) Hydraulic Demo Hammers (Parts Only) |
16 |
$27,000 |
CATERPILLAR Model 988B Rubber Tired Loader, s/n 50W3467, powered by Cat 3408 diesel engine and powershift transmission, equipped with high lift configuration, general purpose loader bucket with bolt-on cutting edge, ROPS over enclosed cab, air conditioning, light package, and 35/65x33 tires. In good condition with fair to good tires. (Approximately 1,000 Hours On Running Take-Out Engine) (200 Hours On Complete Center Pin, Rebuilt Steering and Dump Cylinder) |
17 |
$8,000 |
CATERPILLAR Model 988A Rubber Tired Loader, s/n 87A6131, powered by D343 diesel engine and powershift transmission, equipped with general purpose loader bucket with bolt-on cutting edge, enclosed ROPS cab, light package, and 29.5x29 tires. In fair to poor condition with fair tires. (Weak Torque) |
18 |
$34,000 |
CATERPILLAR Model D8K Crawler Tractor, s/n 77V3887, powered by Cat D342 diesel engine and powershift transmission, equipped with semi-U blade with tilt, Cat No. 8 4-barrel 3-shank ripper, s/n 93M3020 (with one shank), ROPS over shopmade cab, light package, and 24" SBG pads. In fair to good condition with fair to good undercarriage. (Less Than 3,000 Hours On Complete Engine Overhaul) |
19 |
$5,000 |
LORAIN Model Moto-Crane 325, 25 Ton Conventional Truck Crane, s/n 32564, powered by Detroit 4-71 diesel engine, equipped with basic pin-together lattice boom with (1) 20' insert, 20' butt, 15' tip, (1) 5' insert, split drum, mounted on 6x4 carrier, powered by 6 cylinder gas engine and 5 speed transmission with 3 speed auxiliary, equipped with (2) removable outrigger boxes and 12.00x20 tires. In fair condition with fair tires. |
20 |
$700 |
(2) Wrecking Balls and Hook Block |
20A |
$1,000 |
Wrecking Ball |
20B |
$300 |
Miscellaneous Boom and Jib |
21 |
$5,500 |
42"x58' Portable Stacking Conveyor, powered by 15HP electric motor with Dodge TXT5 gear reducer, equipped with SciTronics metal detector, manual raise, and 9.00x20 tires. In fair to good condition with poor tires. (1 11.00x20 tire)(Metal Dent -- Not Working) |
22 |
$1,500 |
BARBER GREENE 18"x85' Radial Stacker, powered by 10HP electric motor with Dodge gear reducer, equipped with manual raise. In fair to good condition with poor tires. |
23 |
$300 |
28"x50' Portable Double Channel Stacking Conveyor, powered by 15HP electric motor with Edison size 4 gear reducer, equipped with manual raise. In fair condition. |
24 |
$4,500 |
24"x70' Stacking Conveyor, powered by 10HP electric motor with Dodge gear reducer, equipped with manual raise. In good condition. |
25 |
$500 |
36"x44' Channel Transfer Conveyor, powered by 10HP electric motor with Edison size 4 gear reducer and 2V belt drive. In good condition. |
26 |
$2,100 |
36"x45' Channel Stacking Conveyor, powered by 7.5HP electric motor with Dodge TXT4A gear reducer and 2V belt drive. In good condition. |
27 |
$4,500 |
36"x50'x8" Channel Transfer Conveyor, powered by 10HP electric motor with Dodge TXT4A gear reducer. In good condition. |
28 |
$800 |
30"x32' Channel Transfer Conveyor, powered by 7.5HP electric motor with Edison ED425 gear reducer. In fair to good condition. |
29 |
$4,500 |
36"x58' Portable Stacking Conveyor, powered by 10HP electric motor with Dodge TXT4A gear reducer, equipped with 12"x20" belt magnet, manual raise, and 10.00x20 tires. In fair condition with fair tires. |
30 |
$5,250 |
BARBER GREENE 24"x80' Radial Stacker, powered by 20HP electric motor with Dodge TXT5 gear reducer and 2V belt drive, equipped with manual raise and 10.00x20 tires. In fair to good condition with fair to good tires. |
31 |
$1,200 |
24"x56' Portable Channel Stacking Conveyor, powered by approx. 10HP electric motor with Edison ED4 gear reducer, equipped with 7.50x20 tires. In poor to fair condition with poor tires. (Support Frame Rusted Through) |
32 |
$5,500 |
36"x48' Portable Stacking Conveyor, powered by 15HP electric motor with Dodge TXT4A gear reducer, equipped with 11'x7' surge bin with 30" reciprocating plate feed, powered by 5HP electric motor with gear and chain drive, manual raise, and 9.00x20 tires. In good condition with good tires. |
33 |
$3,000 |
24"x50' Stacking Conveyor, powered by approx. 15HP electric motor with REX gear reducer. In fair condition. |
34 |
$2,500 |
24"x50' Stacking Conveyor, powered by 10HP electric motor with REX gear reducer. In fair condition. |
35 |
$3,000 |
30"x60' Lattice Transfer Conveyor, powered by 10HP electric motor with Browning No. 7 gear reducer. In fair condition. |
36 |
$1,100 |
24"x48' Channel Stacking Conveyor, powered by 5HP electric motor with Dodge TDT4 gear reducer and 2V belt drive. In good condition. |
37 |
$700 |
26"x45' Portable Stacking Conveyor, powered by 10HP electric motor with Dodge TXT4A gear reducer. In fair condition with scrap tires. |
38 |
$3,000 |
Shopmade 24"x62' Radial Stacker, powered by approx. 10HP electric motor with Dodge TDT4 gear reducer, equipped with manual raise and 9.00x20 tires. In fair to good condition with good tires. |
39 |
$550 |
NEW ENGLAND ROAD MACHINERY 30"x40' Channel Stacking Conveyor, s/n L408C, powered by 5HP electric motor with Dodge TD4 gear reducer and 2V belt drive. In good condition. |
40 |
$1,700 |
30"x50' Portable Stacking Conveyor, powered by 10HP electric motor with Dodge TXT4A gear reducer, equipped with 8.25x15 tires. In fair to good condition with good tires. |
41 |
$800 |
30"x35' Channel Stacking Conveyor, powered by 7.5HP electric motor with Dodge gear reducer. In good condition. |
42 |
$600 |
28"x45', 10" Channel Conveyor, powered by Westinghouse 15HP electric motor with Dodge TDT4 gear reducer. In fair to good condition. (Rip Rap Plant) |
43 |
$800 |
24"x35' Channel Stacking Conveyor, powered by 5HP electric motor with Dodge TXT3 gear reducer and 2V belt drive. In fair condition. (Rip Rap Plant) |
44 |
$1,100 |
27"x25' Portable Stacking Conveyor, powered by 7.5HP electric motor with Dodge TXT4 gear reducer, equipped with 9'x8' surge bin, 3'x6' incline screen, and 7.50x20 tires. In fair to good condition with good tires. (Rip Rap Plant) |
45 |
$700 |
Shopmade Portable Surge Bin, equipped with Syntron FF44C vibrating pan feeder, s/n 240897367, powered by 460 volt electric, with variable speed control, 36"x30' discharge conveyor, powered by 7.5HP electric motor with gear reducer and V belt drive, mounted on tandem axle wagon steer carrier with 7.50x20 tires. In fair condition with poor tires. |
46 |
$14,500 |
1991 OTC 42"x16' Vibrating Grizzly Feeder, series 40-0206, contract #SHMP8-98-010, powered by 25HP electric motor, equipped with shopmade surge bin. In good condition. (Rip Rap Plant) |
47 |
$9,000 |
SIMPLICITY Model OA10-110-A, 4'x18' Vibrating Grizzly Feeder, s/n 50230F110A194, powered by Reliance 20HP electric motor. In fair to good condition. (Rip Rap Plant) |
48 |
$12,000 |
CEDARAPIDS 5'x16' Portable Triple Deck Vibrating Screen, s/n 35195, powered by 40HP electric motor, equipped with 42"x25' bottom discharge conveyor, powered by approx. 10HP electric motor with Dodge gear reducer, mounted on tandem axle carrier with 10.00x20 tires. In fair to good condition with fair to good tires. |
49 |
$65,000 |
NORDBERG Portable Crushing and Screening Plant, equipped with Nordberg 4-1/4' short head cone crusher, s/n 41824, powered by WEG 200HP electric motor, equipped with EL-JAY 5'x16' triple deck vibrating screen, powered by 30HP electric motor, 36"x17' rear discharge conveyor, powered by 15HP electric motor and Dodge TDT3 gear reducer, 36"x19'8" side discharge conveyor, powered by 5HP electric motor and New gear reducer, mounted on tandem axle carrier with 11.00x20 tires. In fair to good condition with good tires. (New Liners Installed) |
50 |
$67,000 |
NORDBERG Portable Crushing and Screening Plant, equipped with Nordberg 4-1/4' standard cone crusher, s/n 41691, powered by Electro-MEC 125HP electric motor, equipped with 5'x16' triple deck vibrating screen, powered by 25HP electric motor, 36"x15' rear discharge conveyor, powered by 5HP electric motor and New gear reducer, 36"x18' side discharge conveyor, powered by 7.5HP electric motor drive, mounted on tandem axle carrier with 11.00x20 tires. In fair to good condition with good tires. (New Liners Installed) |
51 |
$74,000 |
NORDBERG Portable Crushing and Screening Plant, equipped with Nordberg 4-1/4' standard cone crusher, s/n 41293, powered by 150HP electric motor, equipped with EL-JAY model 5163-26FS, 5'x16' 3-deck vibrating screen, s/n 1362, powered by 30HP electric motor, mounted on Cedarapids/EL-JAY tandem axle carrier, equipped with 36"x22' rear discharge conveyor, powered by approx. 15HP electric motor with Dodge ED-4 gear reducer, and 11.00x20 tires. In fair to good condition with poor tires. |
52 |
$64,000 |
NORDBERG/SYMONS 4-1/4' Short Head Portable Cone Crusher, s/n 40840/341, powered by Elektrim 200HP electric motor, mounted on tandem axle carrier with 11.00x22 tires. In fair condition with good tires. |
53 |
$21,000 |
BARMAC Model Mark II Rotop Portable Vertical Shaft Impact Crusher, s/n 602-82-09, powered by Toshiba 250HP electric motor, equipped with 24"x25' elevated feed conveyor, powered by 5HP electric motor and Dodge TDT3 gear reducer, 36"x17' side discharge conveyor, powered by 30HP electric motor, electronic controller, mounted on tandem axle carrier, with 10.00R20 tires. In good condition with fair tires. (With Benshaw Motor Control In Trailer) |
54 |
$37,000 |
1987 MINYU Model MS4230 Portable Jaw Crusher, s/n 578X003, powered by 150HP electric motor, equipped with 4'x16' vibrating grizzley feeder, powered by 30HP electric motor, 46"x30' underbelly discharge conveyor, powered by 15HP electric motor, hydraulic dump and adjusting cylinder for wedge adjustment, mounted on tri-axle carrier with 10.00x20 tires. In good condition with fair to poor tires. |
55 |
$65,000 |
CEDARAPIDS Model 3242 Portable Jaw Crusher, s/n 26101, powered by 150HP, 3-phase electric motor, equipped with 4'x12' vibrating grizzley feeder, powered by 25HP electric motor, hydraulic power unit, powered by 50HP electric motor (used for hydraulic breaker - breaker gone), mounted on tri-axle carrier. In fair to good condition. |
56 |
$3,000 |
Motor Control Center Consisting of: SCITRONICS Magnet Controller; (2) CUTLER HAMMER 125HP, 460 Volt Motor Controls; CUTLER HAMMER 150HP, 460 Volt Motor Control; (2) CUTLER HAMMER and (1) WESTINGHOUSE Main Disconnects; SQUARE D 460 to 240/120 Volt Transformer; Mounted in STRICK 45' Tandem Axle Van Trailer, equipped with top mounted operators station with Cutler Hammer push button controls. (Barmac Electronic Box In Trailer Not Included) (No Title) |
57 |
$500 |
Plant #1 Motor Control Center Consisting of: Electrical including switch gear, push button control panel, SciTronics metal detector control, and main disconnect. |
58 |
$500 |
Lime Plant consisting of: Stone Storage Bin with (2) manual gates and (2) Syntron model F-22DT vibrating pan feeders, s/n K56F391717 and s/n K56F391712; (2) BRADLEY Model Junior Pulverizing Mills, s/n B69 and s/n B63, powered by Neman 100HP electric motors; 24"x30' Enclosed Bucket Elevator, powered by approx. 20HP electric motor with chain drive. In fair condition. |
59 |
$0 |
Mining Permit |
60 |
$0 |
Mining Permit |
61 |
$0 |
Mining Permit |
62 |
$0 |
Mining Permit |
63 |
$0 |
Combination |
64 |
$150 |
Chute Liners |
65 |
$75 |
Cheek Plates (Cedarapids Jaw Crusher) (UN-USED) |
66 |
$400 |
Troughing Rollers (UN-USED) |
67 |
$35 |
Impact Troughing Rollers (UN-USED) |
68 |
$50 |
Troughing Rollers (UN-USED) |
69 |
$50 |
Troughing Rollers (UN-USED) |
70 |
$25 |
Troughing Rollers |
71 |
$30 |
Rubber Return Rollers |
72 |
$0 |
Return Rollers and Hangers |
73 |
$25 |
Belt Rollers |
74 |
$0 |
Impact Frames and Impactors |
75 |
$25 |
Screen Cloth |
76 |
$200 |
Screen Cloth |
77 |
$200 |
Screen Cloth (UN-USED) |
78 |
$200 |
Screen Cloth (UN-USED) |
79 |
$175 |
Screen Cloth |
80 |
$175 |
Screen Cloth |
81 |
$225 |
Screen Cloth |
82 |
$125 |
Screen Cloth |
83 |
$125 |
Screen Cloth |
84 |
$125 |
Screen Cloth |
85 |
$25 |
Screen Side Rails |
86 |
$25 |
Screen Side Rails |
87 |
$100 |
Screen Cloth |
88 |
$100 |
Screen Cloth |
89 |
$10 |
Screen Cloth |
90 |
$225 |
Screen Cloth |
91 |
$200 |
Screen Cloth |
92 |
$100 |
Screen Cloth (UN-USED) |
93 |
$45 |
Screen Rack |
94 |
$0 |
Screen Rack |
95 |
$0 |
Screen Rack |
96 |
$0 |
Screen Cloth |
97 |
$150 |
Screen Cloth |
98 |
$150 |
Screen Cloth |
99 |
$150 |
Screen Cloth |
100 |
$150 |
Screen Cloth |
101 |
$150 |
Screen Cloth |
102 |
$150 |
Screen Cloth |
103 |
$150 |
Screen Cloth (UN-USED) |
104 |
$150 |
Screen Cloth |
105 |
$150 |
Screen Cloth |
106 |
$35 |
(3 Pallets) Troughing Rollers |
107 |
$75 |
Return Rollers |
108 |
$55 |
(2 Pallets) Troughing Rollers |
109 |
$95 |
(3 Pallets) Miscellaneous Rollers |
110 |
$300 |
(3 Pallets) Troughing Rollers |
111 |
$35 |
Miscellaneous Used Shafts |
112 |
$525 |
(180') 1-5/8" Wire Rope (UN-USED) |
113 |
$275 |
5HP, 3-Phase Electric Motor (Rebuilt) |
114 |
$275 |
15HP, 3-Phase Electric Motor (Rebuilt) |
115 |
$275 |
30HP, 3-Phase Electric Motor (Rebuilt) |
116 |
$275 |
15HP, 3-Phase Electric Motor (Rebuilt) |
117 |
$25 |
(2 Pallets) Miscellaneous Rollers |
118 |
$375 |
36" Belting |
119 |
$375 |
30" Belting |
120 |
$375 |
24" Belting |
121 |
$375 |
48" Belting |
122 |
$375 |
42" Belting |
123 |
$125 |
42" Belting |
124 |
$170 |
(14) Self-Cleaning Tail Rollers |
125 |
$25 |
(7) Miscellaneous Head Pulleys |
126 |
$45 |
Toggle Plate and Wedges (Minyu Jaw Crusher) |
127 |
$25 |
Shafts |
128 |
$100 |
SYNTRON Model F-440-B Vibrating Pan Feeder, s/n J71555, powered by 460 volt electric motor, equipped with stainless steel lining and Syntron controller. In very good condition. |
129 |
$400 |
Miscellaneous Pillar Block Bearings |
130 |
$45 |
Miscellaneous Pillar Block Bearings |
131 |
$95 |
Sheave Inserts |
132 |
$200 |
Miscellaneous Sheaves |
133 |
$55 |
Crusher Bearings and Parts |
134 |
$400 |
Miscellaneous Belt Hardware |
135 |
$140 |
Screen Bolts |
136 |
$100 |
Starter Boxes |
137 |
$100 |
(3 Pallets) Miscellaneous Belts (UN-USED) |
138 |
$50 |
Screen Deck Rubber (UN-USED) |
139 |
$120 |
Miscellaneous Crusher Tooling |
140 |
$5 |
Powerline Disconnects |
141 |
$75 |
Truck Tarps |
142 |
$5 |
Grizzly Bar |
143 |
$35 |
Pump Parts |
144 |
$1,050 |
(16) Electric Motor Cores |
145 |
$150 |
1972 TRAILMOBILE 45' Tandem Axle Flatbed Trailer, VIN# H3S257, equipped with 10.00x22 tires. In poor condition with fair to good tires. (Front Tandem Removed) (No Title) |
146 |
$150 |
40' Tandem Axle Van Storage Trailer, equipped with fixed tandems, swing doors, and 10.00x20 tires. In poor condition with poor tires. (No Title) |
147 |
$300 |
BROWN Model 40MVRA203B, 40' Tandem Axle Van Storage Trailer, VIN# 8583898, equipped with fixed tandems, swing rear doors, and 10.00x22 tires. In fair condition with poor tires. (One Rear Door Damaged) (No Title) |
148 |
$250 |
BARBER GREENE 18"x92' Radial Stacker, powered by 20HP electric motor with Barber Greene gear reducer, equipped with manual raise, manual angle wheels, and 10.00x20 tires. In fair condition with fair tires. |
149 |
$250 |
42"x60' Channel/Angle Conveyor. In good condition. |
150 |
$275 |
48"x14' Channel Conveyor, powered by 5HP electric motor with Dodge TXT3 gear reducer. In fair condition. |
151 |
$100 |
BARBER GREENE 18"x52' Conveyor Structure, equipped with head pulley and gear reducer. In fair condition. |
152 |
$300 |
(2) Damaged Conveyors (Parts) |
153 |
$400 |
Miscellaneous Damaged Conveyor (Parts) |
|
|