|
To search Listing, use Control F (PC), Command F (MAC)
Thursday, September 27, 2007 - 9:00 A.M. |
South Bend Limestone Company
Spring Church, PA |
Absolute Auction |
NOTICE: South Bend Limestone Company has completed all current reclamation projects and is proceeding with the second and final phase of liquidation. A few consignments have been taken from local contractors and miners, including Glenn O. Hawbaker, Inc., Walter L. Houser Coal Company, Inc., and Schneider Services, Inc. Everything in the auction is owned by these companies and must sell to the highest bidder regardless of price! |
SALES TAX:
Since this contractor is selling items not normally sold in the course of his business, the Commonwealth of Pennsylvania considers this an isolated sale and does not require the auction company to collect sales tax. However, the Commonwealth does require the collection of sales tax on items being sold on behalf of lending institutions, equipment rental companies and dealers, etc. These items will be so noted in the sale day catalog. |
REMOVAL:After complete payment, all sale items may be removed on sale day as long as the removal activity is not disruptive to the sale and only until 5:00 p.m. Items may also be removed Friday, September 28 and Monday, October 1 through Thursday, October 4, from 8:00 a.m. to 5:00 p.m. All items must be removed no later than Thursday, October 4, 2007, at 5:00 p.m. |
PA Auction License No: AY000281 |
1 |
$25 |
Tool Box with contents (MD) (Tax) |
1A |
$600 |
CATERPILLAR Tourque Multiplier |
2 |
$325 |
1" Socket Set |
3 |
$95 |
3/4" Socket Set |
4 |
$110 |
INGERSOLL-RAND 3/4" Pneumatic Impact Wrench |
5 |
$25 |
CRAFTSMAN 1/2" Pneumatic Impact Wrench |
6 |
$30 |
DEWALT Electric Angle Grinder (Not Running) |
7 |
$0 |
(2) Electric Angle Grinders & Drill (Grinder Not
Running) |
8 |
$30 |
HARRINGTON 1 Ton Chain Come-A-Long |
9 |
$20 |
(3) Cable Come-A-Longs |
10 |
$50 |
C-Clamps, Pipe Wrenches & Hammers |
11 |
$65 |
Steel Table with vise |
12 |
$25 |
Reciprocating Saw & Drill (Not Running) (MD) (Tax) |
13 |
$55 |
BLACK & DECKER Electric Chop Saw (MD) (Tax) |
14 |
$95 |
Oxygen/Acetylene Torch Set |
15 |
$400 |
LINCOLN Idealarc 250 Amp Electric Arc Welder |
16 |
$45 |
(2) Welding Screens |
17 |
$70 |
JET 16-Speed Drill Press |
18 |
$110 |
EXIDE 6/12/24 Volt Battery Charger |
19 |
$45 |
MASTER 110,000 BTU Portable Space Heater |
20 |
$95 |
MASTER 165,000 BTU Portable Space Heater (MD) (Tax) |
21 |
$25 |
(2) Propane Portable Space Heaters (MD) (Tax) |
22 |
$25 |
CRAFTSMAN Wet/Dry Shop Vac |
23 |
$25 |
TROY-BILT 2,350 PSI Portable Pressure Washer (Not Running)
(Engine Seized) (MD) (Tax) |
24 |
$80 |
VARISCO 4" Portable Diesel Powered Trash Pump |
25 |
$150 |
2" Gas Powered Centrifugal Pump (MD) (Tax) |
26 |
$150 |
HONDA WP20X, 2" Gas Powered Centrifugal Pump (MD)
(Tax) |
27 |
$10 |
3" Discharge Hose (MD) (Tax) |
28 |
$375 |
SPEEDI-CUT SC7314 Gas Powered Demo Saw (MD) (Tax) |
29 |
$135 |
STIHL TS350 Gas Powered Demo Saw (Broken Pull Cord) (MD)
(Tax) |
30 |
$250 |
STIHL TS350 Gas Powered Demo Saw (MD) (Tax) |
31 |
$185 |
STIHL 029 Gas Powered Chain Saw (MD) (Tax) |
32 |
$185 |
HUSQVARNA 556Y Gas Powered Chain Saw (Not Running) (MD)
(Tax) |
33 |
$110 |
EMGLO Electric Powered Air Compressor (MD) (Tax) |
34 |
$210 |
THOR Pneumatic Rock Drill (MD) (Tax) |
35 |
$55 |
(2) Pneumatic Chipping Hammers (MD) (Tax) |
36 |
$10 |
(3) Pneumatic Chipping Hammers (MD) (Tax) |
37 |
$25 |
Electric Chipping Hammers (MD) (Tax) |
38 |
$5 |
Pneumatic Bore Machine with track (MD) (Tax) |
39 |
$55 |
Bolt Bin |
39A |
$10 |
VIBRA-TECH Vibration Monitor |
39B |
$10 |
QUEST Noiseometer |
40 |
$10 |
Gas Powered Foot Compactor (Not Running) |
41 |
$45 |
Hand Tools |
42 |
$25 |
Extension Cords |
43 |
$55 |
Hydraulic Hose (MD) (Tax) |
43A |
$850 |
HOTSY Model 1260A Steam Cleaner, s/n H373790497, powered
by Briggs & Stratton 16HP, 2 cylinder gas engine, rated @ 4.5GPH/270GPH,
3,000 PSI, 386,000 BTU/hour, equipped with 250 gallon poly water tank,
mounted in 8'x14'6" single axle tag-a-long van body trailer, equipped
with roll-up rear door and 8.00-16.5 tires. In good condition with good
tires. (No VIN Plate-No Title) |
44 |
$150 |
STONE Portable Gas Powered Mortar Mixer |
45 |
$1,050 |
LINCOLN SAE-300, 300 Amp Skid Mounted Arc Welder, s/n
A-818348, powered by 4 cylinder diesel engine, with leads. |
46 |
$175 |
HOBART 250 Amp Skid Mounted Arc Welder, s/n 55171-1,
powered by Ford 6 cylinder gas engine. (Running-No Electric) (GOH) |
47 |
$950 |
JAEGER 150 CFM Portable Air Compressor, s/n RC-31644,
powered by Detroit 2 cylinder diesel engine, equipped with 215/60R15 tires.
In fair condition with fair tires. |
48 |
$850 |
GORMAN RUPP Model 14A2B, 4" Portable Pump, s/n
612517, powered by Detroit 3 cylinder diesel engine, equipped with 10.00-20
tires. In fair condition with fair tires. |
49 |
$325 |
ATHEY 156, 10' Spring Tooth Harrow, with transport wheels |
50 |
$375 |
8' Chisel Plow with transport wheels |
51 |
$350 |
6' Ground Conditioner, 3-point hitch |
52 |
$100 |
JOHN DEERE 5' Brush Hog, 3-point hitch |
53 |
$150 |
Drag Blade, 3-point hitch |
54 |
$3,200 |
2002 DODGE Model Ram 2500 Laramie SLT, 4x4 Pickup Truck,
VIN# 3B7KF26Z42M275038, powered by Magnum V-8 gas engine and automatic
transmission, equipped with 8' bed with liner, air conditioning, cruise
control, power windows, locks and mirrors, and 265/75R16 tires. In good
condition with good tires. (169,832 Miles) (Small Frame Crack) |
55 |
$4,600 |
2000 GMC Model 3500SL, 4x4 Pickup Truck, VIN#
1GTHK34J4YR199661, powered by Vortec 8 cylinder gas engine and automatic transmission,
equipped with 8' bed with spray-on liner, bed rails, tow package, air
conditioning, cruise control, and 245/75R16 tires. In good condition with
good tires. (106,318 Miles) |
56 |
$1,100 |
1995 DODGE Model Ram 2500, 4x4 Pickup Truck, VIN#
1B7KF26C5SS115303, powered by Cummins diesel engine and automatic
transmission. In fair condition. (287,884 Miles) |
57 |
$3,000 |
1996 FORD Model F-350XL, 4x4 Single Axle Flatbed Truck,
VIN# 1FDHF36G2TEA49582, powered by V-8 gas engine and automatic transmission,
equipped with 9' bed with 12" wood stake sides, material rack, 8'6"
hydraulic angle snow plow, dual fuel tanks, dual rear wheels, air
conditioning, and 235/85R16 tires. In good condition with good tires.
(131,846 Miles) |
58 |
$375 |
CURTIS 8' Gas Powered Salt Spreader (GOH) |
59 |
$375 |
CURTIS 8' Gas Powered Salt Spreader (GOH) |
60 |
$750 |
Shopmade Tandem Axle Tilt Deck Tag-A-Long Trailer, VIN#
SW50363PA, equipped with 6'6"x12' steel deck, 19" sides, fold-down
ramp, and F78x15 tires. In good condition with good tires. |
61 |
$2,200 |
1980 GMC Model 7000 Single Axle Service Truck, VIN#
T17DBAV569103, powered by V-8 gas engine and automatic transmission, equipped
with 12' open service body with 12" work bumper with vise, AutoCrane 18'
service boom, Emglo model W11HGB-30, 2-stage air compressor, powered by Honda
11HP gas engine, self-winding hose reel, (2) manual outriggers, and 9.00x20
tires. In fair to good condition with good tires. |
62 |
$4,000 |
HOLAN Model EHV-52, 52' Aerial Lift, s/n 27759, mounted on
1984 Ford Model F-800 Service Body, VIN# 1FDPF82K3EVA55185, powered by V-8
gas engine and 5 speed transmission with 2 speed rear, equipped with
outriggers. In fair condition with fair tires. (GOH) |
63 |
$4,700 |
RO Model TD701A, 7.5 Ton Hydraulic Crane, s/n 125,
equipped with 16'-31'8" 3-section boom, weighted hook, and (2) hydraulic
outriggers, mounted on 1972 Ford Model 8000 Tandem Axle Flatbed Truck, VIN#
U80CVP37521, powered by Cat 3208, 210HP diesel engine and 5 speed with 3
speed auxiliary transmission, equipped with 16' steel flatbed, walking beam
spring suspension, and 10.00R20 tires. In fair to good condition with good
tires. (GOH) |
64 |
$6,000 |
1990 CASE Model 1840 Skid Steer Loader, s/n JAF0064983,
powered by Case 4 cylinder diesel engine and hydrostatic transmission,
equipped with general purpose loader bucket and 10x16.5 tires. In fair
condition with good tires. (Missing VIN Plate) |
65 |
$50 |
Loader Bucket with chute extension (Skid Steer) |
66 |
$125 |
Loader Bucket with chute extension (Skid Steer) |
67 |
$400 |
44" Fork Attachment (Skid Steer) |
68 |
$9,500 |
CATERPILLAR Model 12F Motor Grader, s/n 73G2251, powered
by Cat 6 cylinder diesel engine and 4 speed transmission with 2 speed
transfer case, equipped with 12' moldboard, wheel lean, ROPS canopy, and
14.00x24 tires. In fair condition with good tires. |
69 |
$5,750 |
CATERPILLAR Model 922B Rigid Frame Rubber Tired Loader,
s/n 94A03671, powered by Cat 4 cylinder diesel engine and shuttle
transmission, equipped with general purpose loader bucket with weld-on
cutting edge, enclosed ROPS cab, light package, and 15.5-25 tires. In fair
condition with fair tires. (GOH) |
70 |
$17,000 |
1987 CATERPILLAR Model 916 Rubber Tired Loader, s/n
2XB01278, powered by 4 cylinder diesel engine and powershift transmission,
general purpose loader bucket with bolt-on cutting edge, enclosed ROPS cab
with heat and air conditioning, light package and 17.5R25 tires. In good
condition with fair tires. (SSI) |
71 |
$175 |
5' Bucket Forks (SSI) |
72 |
$8,500 |
DRESSER Model 530 Rubber Tired Loader, s/n
5303470530U001621, powered by International 6 cylinder diesel engine and
powershift transmission, equipped with general purpose loader bucket with
weld-on cutting edge, enclosed ROPS cab, light package, and 20.5x25 tires. In
fair condition with fair to good tires. |
73 |
$45,000 |
CATERPILLAR Model 988B Rubber Tired Loader, s/n 50W3951,
powered by Cat 3408 diesel engine and powershift transmission, equipped with
general purpose bucket with teeth, pneumatic lube system, enclosed ROPS cab
with air conditioning, light package, and 35/65x33 tires. In good condition
with good to very good tires. |
74 |
$31,000 |
CATERPILLAR Model 988B Rubber Tired Loader, s/n 50W3776,
powered by Cat 3408 diesel engine and powershift transmission, equipped with
general purpose loader bucket with bolt-on cutting edge, ROPS over enclosed
cab, air conditioning, light package, and 35/65x33 tires. In fair to good
condition with fair tires. (Rebuilt Center Pin) (Rebuilt Steering Cylinders) |
75 |
$30,000 |
CATERPILLAR Model 988B Rubber Tired Loader, s/n 50W1816,
powered by Cat 3408 diesel engine and powershift transmission, equipped with
general purpose bucket with bolt-on cutting edge, enclosed ROPS cab with air
conditioning, light package, and 65/35x33 tires. In good condition with poor
tires. |
76 |
$26,000 |
CATERPILLAR Model 988B Rubber Tired Loader, s/n 50W05976,
powered by Cat 3408 diesel engine and powershift transmission, equipped with
general purpose bucket with teeth, enclosed ROPS cab with air conditioning,
light package, and 35/65x33 tires. In good condition with fair to poor tires.
(HOUSER) |
77 |
$42,500 |
CATERPILLAR Model 992C Rubber Tired Loader, s/n 42X344,
powered by Cat 3412 diesel engine and powershift transmission, equipped with
spade nose bucket with teeth, ROPS over enclosed cab with air conditioning,
light package, and 45/65x45 tires. In good condition with good tires. |
78 |
$4,000 |
Spade Nose Loader Bucket (Cat 992C/D) (CB) (Tax) |
79 |
$4,000 |
Spade Nose Loader Bucket (Cat 992C/D) (CB) (Tax) |
80 |
$800 |
Spade Nose Loader Bucket with teeth (Cat 992C) |
81 |
$200 |
General Purpose Loader Bucket (Cat 988B) |
82 |
$0 |
35/65-33 Tire (Cat 988B) |
83 |
$0 |
35/65-33 Tire (Cat 988B) |
84 |
$19,500 |
CATERPILLAR Model 953 Crawler Loader, s/n 20Z00150,
powered by Cat 3204 diesel engine and hydrostatic transmission, equipped with
general purpose loader bucket with teeth, enclosed ROPScab, rock guards, and
20" DBG pads. In good condition with fair undercarriage. |
85 |
$18,000 |
CATERPILLAR Model 977L Crawler Loader, s/n 11K8662,
powered by Cat 3306 diesel engine and powershift transmission, equipped with
general purpose bucket with teeth, enclosed ROPS cab, tow hitch, and 18"
DBG pads. In fair to good condition with good undercarriage. |
86 |
$35,000 |
CATERPILLAR Model D6D LGP Crawler Tractor, s/n 6X1460,
powered by Cat 3306 diesel engine and powershift transmission, equipped with straight
blade with tilt, rear winch, s/n 36U607, ROPS over enclosed cab with heat,
light package, and 36.5" SBG pads. In good condition with good
undercarriage. |
87 |
$20,000 |
CATERPILLAR Model D9H Crawler Tractor, s/n 90V7022,
powered by Cat D353E diesel engine and powershift transmission, equipped with
U blade with tilt, 2-piece rear counterweight with tow pin, rock guards,
enclosed ROPS cab, and light package. In fair to good condition with fair to
good undercarriage. (Weak Engine) |
88 |
$100,000 |
1990 CATERPILLAR Model D11N Crawler Tractor, s/n 74Z00753,
powered by Cat 3508 diesel engine and powershift transmission, equipped with
U blade with dual tilt, ROPS over enclosed cab with air conditioning, light
package, and 32" SBG pads. In good condition with good undercarriage. |
89 |
$13,000 |
4-Barrel Single Shank Ripper, s/n P800524 |
90 |
$0 |
Combination of Lots #88 and #89 |
91 |
$59,500 |
CATERPILLAR Model D10 Crawler Tractor, s/n 84W01034,
powered by Cat D348 diesel engine and powershift transmission, equipped with
U blade with tilt, 4-barrel single shank ripper, s/n 32W00704, with hydraulic
pin puller, ROPS over enclosed cab, air conditioning, light package, and
32" SBG pads. In good condition with fair undercarriage. |
92 |
$900 |
U-Blade (Cat D9L) (CB) (Tax) |
93 |
$2,500 |
U-Blade with push arms (Cat D9H) (CB) (Tax) |
94 |
$20,000 |
1996 CATERPILLAR Model 311 Hydraulic Excavator, s/n
9LJ00792, powered by Cat 3064 diesel engine and hydraulic drive, equipped
with 9' dipper stick, 36" digging bucket, hydraulic thumb, hydraulic
plumbing, enclosed ROPS cab, light package, 11' crawlers, and 30" TBG
pads. In good condition with good undercarriage. |
95 |
$3,400 |
ALLIED 740 Hydraulic Demo Hammer (Cat 311) |
96 |
$650 |
24" Digging Bucket (Cat 311) |
97 |
$800 |
JB HENDRIX Hydraulic Quick Coupler & Adaptor (Cat 311) |
98 |
$47,500 |
2000 CATERPILLAR Model 315BL Hydraulic Excavator, s/n
3AW02337, powered by Cat 3046 diesel engine and hydraulic drive, equipped
with 8'6" dipper stick, Esco 24" digging bucket, JB Hendrix
hydraulic quick disconnect, hydraulic beyond, enclosed ROPS cab with heat,
light package, 13' crawlers, and 24" TBG pads. In good condition with
good to very good undercarriage. (SSI) |
99 |
$32,500 |
1997 CATERPILLAR Model 320B Hydraulic Excavator, s/n
5BR01321, powered by Cat 3066, 128HP diesel engine and hydraulic drive,
equipped with 9'6" dipper stick with thumb bracket, 46" digging
bucket, enclosed ROPS cab with heat, light package, 13'6" crawlers, and
31.5" TBG pads. In good condition with good undercarriage. (TOMSON) |
100 |
$6,000 |
GRADALL Model G1000 Hydraulic Excavator, s/n NP315764,
powered by (2) Detroit 4-71 diesel engines and hydraulic drive, equipped with
2-section rotating boom, 74" clean-up bucket with teeth, 14' crawlers,
and 30" TBG pads. In good condition with good undercarriage. |
101 |
$12,000 |
1988 DEMAG Model H65 Hydraulic Excavator, s/n 26014,
powered by Cat 3406 diesel engine and hydraulic drive, equipped with 9'
dipper stick, 72" digging bucket, ROPS over enclosed cab, air
conditioning, light package, 17'8" crawlers, and 28" DBG pads. In
fair to good condition with fair to good undercarriage. |
102 |
$8,500 |
1988 DEMAG Model H65 Hydraulic Excavator, s/n 26041,
powered by Cat 3406 diesel engine and hydraulic drive, equipped with 10'
dipper stick, 72" digging bucket, ROPS over enclosed cab, air conditioning,
light package, 17'9" crawlers, and 28" DBG pads. In fair condition
with fair to good undercarriage. |
103 |
$550 |
72" DEMAG Bucket |
103A |
$450 |
42" Digging Bucket (Cat 235) (CB) (Tax) |
104 |
$36,000 |
CATERPILLAR Model 773B, 50 Ton End Dump, s/n 63W01060,
powered by Cat 3412 diesel engine and 7 speed powershift transmission,
equipped with lined and heated body, supplemental steering, brake retarder,
rock ejectors, air conditioning, and 21.00R35 tires. In good condition with
fair to good tires. (HOUSER) |
105 |
$30,000 |
CATERPILLAR Model 773B, 50 Ton End Dump, s/n 63W00370,
powered by Cat 3412 diesel engine and 7 speed powershift transmission,
equipped with lined and heated body, supplemental steering, brake retarder,
and 21.00R35 tires. In good condition with fair to good tires. (HOUSER) |
106 |
$46,000 |
CATERPILLAR Model 769C, 35 Ton End Dump, s/n 1X389,
powered by Cat 3408 diesel engine and 7 speed powershift transmission,
equipped with lined and heated body, supplemental steering, brake retarder,
quick fuel, rock ejectors, air conditioning, light package, and 18.00R33
tires. In good condition with fair tires. |
107 |
$20,000 |
EUCLID Model R35, 35 Ton End Dump, s/n 71741, powered by
Cummins K-19-C diesel engine and 6 speed powershift transmission, equipped
with lined body, rock ejectors, brake retarder, air conditioning, and
18.00x33 tires. In good condition with fair to good tires. |
108 |
$12,500 |
CATERPILLAR Model 769B, 35 Ton End Dump, s/n 99F6213,
powered by D343 diesel engine and 3 speed powershift transmission, equipped
with lined body, rock ejectors, light package, and 18.00x25 tires. In fair
condition with fair tires. |
109 |
$4,000 |
EUCLID Model 70TD, 30 Ton End Dump, s/n 34315, powered by
Cummins 6 cylinder diesel engine and 6 speed powershift transmission,
equipped with lined body, rock ejectors, air conditioning, and 18.00x25
tires. In fair condition with fair to good tires. |
110 |
$17,000 |
EUCLID Model R85, 85 Ton End Dump, s/n 63514, powered by
Detroit 16V-71 electric start diesel engine and 6 speed powershift transmission,
equipped with body liner, brake retarder, supplemental steering, rock
ejectors, air conditioning, and 24.00x49 tires. In good condition with poor
to fair tires. |
111 |
$16,000 |
EUCLID Model R85, 85 Ton End Dump, s/n 63515, powered by
Detroit 16V-71 air start diesel engine and 6 speed powershift transmission,
equipped with body liner, brake retarder, supplemental steering, rock
ejectors, air conditioning, and 24.00x49 tires. In good condition with good
tires. |
112 |
$7,000 |
DAVEY Model M8A Blasthole Drill, s/n 983, powered by
Detroit 6-53 diesel engine, equipped with Davey 6-stage air compressor, top
drive, Ramsey cable retrieval winch, 40' mast, (10) 20'x4" drill steels,
(1) 30'x4" drill steel, (3) hydraulic stabilizers, mounted on 1972 Ford
Model 900 Tandem Axle Carrier, VIN# T91LVQ30133, powered by 8 cylinder gas
engine and 4 speed transmission with 4 speed auxiliary, equipped with
10.00x20 tires. In fair condition with fair tires. |
113 |
$2,000 |
1968 MILITARY Model M109A3, 2.5 Ton 6x6 Fuel Truck, VIN#
040-457680332-10388, powered by 6 cylinder diesel engine and 5 speed
transmission with 2 speed transfer case, equipped with approx. 1,000 gallon
fuel body, Blackmer PTO pump, electric winding hose reel, and 9.00x20 tires.
In fair condition with fair tires. |
114 |
$600 |
INTERNATIONAL Model Fleetstar 2000 Tandem Axle Water
Truck, VIN# 157240G382368, powered by International 6 cylinder diesel engine
and 5 speed transmission, equipped with approx. 1,500 gallon water/brine
tank, rear spray bar, and 10.00x20 tires. In poor to fair condition with poor
tires. (No Title) |
115 |
$600 |
1966 INTERNATIONAL Model RF190ZZ Tandem Axle Water Truck,
VIN# 241912G234475, powered by International 6 cylinder diesel engine and 4
speed transmission with 2 speed auxiliary, equipped with approx. 1,000 gallon
steel water tank, front and rear spray bars, and 10.00x20 tires. In poor to
fair condition with fair to good tires. (No Title) |
116 |
$2,600 |
1982 FORD Model 8000 Tandem Axle Dump Truck, VIN#
1FDZU80U0CVA36772, powered by Cat 3208 diesel engine and Fuller 10 speed
transmission, equipped with 14'6" steel dump body and 10.00R20 front and
11.00x20 rear tires. In fair condition with good tires. (Transmission Needs
Work - High Side of Transmission Out) |
117 |
$8,750 |
1985 MACK Model RD686S Tandem Axle Cab & Chassis, VIN#
1M2P138C8FA012522, powered by Mack EM6-300 diesel engine and 6 speed
transmission, equipped with 44,000# rears, 12,860# front axle, double frame,
2-position Jake brake, 227" wheelbase, air conditioning, and 11R24.5
tires. In fair to good condition with good tires. |
118 |
$300 |
1976 FORD Model F-600 Single Axle Welder Truck, VIN#
F61EVC76165, powered by 8 cylinder gas engine and 4 speed transmission with 2
speed rear, equipped with 10' welder body with (2) manual outriggers and
8.25x20 tires. In fair condition with fair tires. |
119 |
$7,500 |
1973 PENN 26' Tandem Axle Aluminum Dump Trailer, VIN#
2024, equipped with steel frame, tarp kit, and 11R22.5 tires. In good
condition with good tires. |
120 |
$6,500 |
1972 CITY 26' Tandem Axle Aluminum Dump Trailer, VIN#
A1452209, equipped with tarp kit and 11R24.5 tires. In good condition with
good tires. |
121 |
$500 |
BROWN D40MVA205, 40' Tandem Axle Storage Van Trailer, VIN#
M591001 (No Title) |
122 |
$500 |
FRUEHAUF 35' Tandem Axle Storage Van Trailer (No Title) |
123 |
$350 |
Tandem Axle 5th Wheel Dolly (No Title) |
124 |
$475 |
CHEVROLET School Bus, equipped with 9.00x20 tires. In poor
condition with poor tires. (No Engine, Transmission Or Front Axle) (No Title) |
125 |
$900 |
10,000 Gallon Skid Mounted Fuel Tank |
126 |
$375 |
Skid Mounted Fuel Tank |
127 |
$100 |
500 Gallon Skid Mounted Used Oil Tank |
128 |
$50 |
500 Gallon Fuel Tank with structure |
129 |
$35 |
Fuel Tank with structure |
130 |
$25 |
275 Gallon Skid Mounted Fuel Tank |
131 |
$45 |
Skid Mounted Fuel Tank with single axle trailer |
132 |
$75 |
Fuel Tank |
133 |
$280 |
MACK Hood |
134 |
$3,250 |
GRADALL Model G1000 Hydraulic Excavator, s/n NP324332,
powered by (2) Detroit 4-71 diesel engines and hydraulic drive, equipped with
2-section rotating boom, 76" digging bucket with weld-on cutting edge,
14'2" crawlers, and 30" TBG pads. In poor condition with poor
undercarriage. (Missing Two Drive Motors) (One Track Removed) (One Engine
Missing Parts) |
135 |
$650 |
Backfill Blade (Cat 826) (CB) (Tax) |
136 |
$300 |
Concrete Precast Blocks (Approximately 75) |
137 |
$85 |
Railroad Ties (Approximately 85) |
138 |
$100 |
Railroad Ties (Approximately 90) |
139 |
$135 |
KIESLER Clam Bucket and Slings |
140 |
$0 |
Blasting Mat |
141 |
$5 |
Conveyor Belt |
142 |
$90 |
Block & Ball |
143 |
$120 |
1 Cubic Yard Bucket |
144 |
$200 |
Canopy |
145 |
$47,500 |
1994 SCREEN MACHINE Model D510-M11 Portable Screening
Plant, s/n D510-M11-9D445, powered by Cummins 5.9L, 6 cylinder diesel engine
with Funk hydraulic power unit, equipped with 5'x14' feed hopper with
hydraulic grizzly, 48"x14' belt feeder, 48"x45' screen feed
conveyor, 5'x10' double vibratory screen, soil shredding attachment, and
10.00x20 tires. In good condition with good tires. |
146 |
$7,500 |
2001 SCREEN MACHINE Model CH40-24, 24"x40' Hydraulic
Radial Stacking Conveyor, s/n CH40-24-JA1316, equipped with hydraulic raise
and 8-14.5 tires. In good condition with good tires. |
147 |
$8,000 |
SCREEN MACHINE Model CH-40, 24"x40' Hydraulic Radial
Stacking Conveyor, s/n CH-40-HE73, equipped with hydraulic raise and 8-14.5
tires. In good condition with good tires. |
148 |
$3,500 |
1999 MFE 9'9"x36' Tandem Axle Office Trailer, VIN#
10688, equipped with (1) office, conference room, central air conditioning
and heat, security system, (2) man doors, plan table, and 7x14.5 tires. In
good condition with good tires. (Title Delay) |
149 |
$4,500 |
1988 EAGLE 10'x44' Tandem Axle Office Trailer, VIN# 37021,
equipped with (3) offices, central air conditioning, baseboard heat,
bathroom, (2) man doors, plan table, and 7x14.5 tires. In good condition with
good tires. |
150 |
$10 |
Desk, Chairs & File Cabinets |
151 |
$20 |
Water Cooler (MD) (Tax) |
152 |
$5,000 |
CAT 3408 Diesel Engine with stand (Running Takeout - Needs
Rebuilt) |
153 |
$250 |
(3 Pallets) Gas Valves & Digital Controllers |
153A |
$45 |
Oversized Load Signs |
154 |
$525 |
Starters |
155 |
$450 |
Alternators |
156 |
$45 |
Assorted Equipment Parts |
157 |
$50 |
Bucket Edges |
158 |
$750 |
Dragline Parts |
159 |
$100 |
Bucket Teeth & Miscellaneous Parts |
160 |
$100 |
Equipment Rollers |
161 |
$10 |
EUCLID Parts |
162 |
$1,850 |
Drill Bits & Drill Accessories |
163 |
$85 |
Assorted Parts |
164 |
$30 |
Hydraulic Hose & Belts |
165 |
$190 |
Bucket Teeth |
166 |
$10 |
Assorted CAT Parts |
167 |
$150 |
Assorted Hardware |
168 |
$20 |
Pipe Vise with stand |
|
|