| 1 |
$6,750.00 |
2021
LGS PA, LLC Model LSCAB8.5x24TE3FF, 24' Tandem Axle Aluminum Cargo Trailer,
VIN# 53BLTEB23MP016076, equipped with 8'6" width, 10,000# GVWR, fold
down rear and curbside doors, and 225/75R15 tires. In good condition with
good tires. (PA) |
| 2 |
$6,000.00 |
2019
LGS PA, LLC Model ST85X24TE3, 24' Tandem Axle Aluminum Cargo Trailer, VIN#
53BLTEB23KP008377, equipped with 8'6" width, 9,900# GVWR, swing away
rear and curbside doors, and 225/75R15 tires. In good condition with good
tires. (Slight Right Front Rear Corner Damage) (PA) |
| 3 |
$6,750.00 |
2019
LGS PA, LLC Model ST85X24TE3, 24' Tandem Axle Aluminum Cargo Trailer, VIN#
53BLTEB2XKP008375, equipped with 8'6" width, 9,900# GVWR, fold down rear
and curbside doors, and 225/75R15 tires. In good condition with good tires.
(PA) |
| 4 |
$4,500.00 |
2002
WABASH NATIONAL 28' Single Axle Aluminum Van Trailer, VIN# 1JJV281W42L782846
(PA Registration Card), equipped with 102" width, air ride suspension,
roll up rear door, Maxon 2,500# liftgate, and 295/75R22.5 tires. In good
condition with fair tires. (PA) |
| 5 |
$3,250.00 |
2000
WABASH NATIONAL Model DVCHSA, 28' Single Axle Aluminum Van Trailer, VIN#
1JJV281W2YL705482, equipped with 102" width, 40,000# GVWR, air ride
suspension, roll up rear door, steel disc wheels (rusted), and 295/75R22.5
tires. In good condition with good tires. (PA) |
| 6 |
$3,000.00 |
1999
WABASH NATIONAL Model DVDRHSA 28' Single Axle Aluminum Van Trailer, VIN#
1JJV281W6XL515473, equipped with 102" width, 40,000# GVWR, spring
suspension, roll up rear door, rear trailer coupler, and 295/75R22.5 tires.
In good condition with fair tires. (PA) |
| 7 |
$2,500.00 |
1988
PINES Model CTSR28102, 28' Single Axle Aluminum Van Trailer, VIN#
1PNE281F5JKB33872, equipped with 102" width, 40,000# GVWR, spring
suspension, roll up rear door, underbody side fairings, trailer coupler,
steel disc wheels (rusted), and 295/75R22.5 tires. In good condition with
fair to good tires. (Refurbished By Road Systems Inc.) (PA) |
| 7A |
$1,100.00 |
Single
Axle 5th Wheel Dolly (No Title) (PA) |
| 8 |
$11,000.00 |
2015
VOLVO Model XC60, T6 Platinum AWD Sport Utility Vehicle, VIN#
YV4902RM5F2661431, powered by 3.0L turbo gas engine and automatic
transmission, equipped with sunroof, leather interior, interior power
package, air conditioning, cruise control, alloy wheels, and 235/60R18 tires.
In good condition with good tires. (Odometer Reads 111,308 Miles) (PA) |
| 9 |
$2,900.00 |
2016
FORD Escape SE, 4x4 Sport Utility Vehicle, VIN# 1FMCU9GX1GUA42135, powered by
1.6L Eco Boost gas engine and automatic transmission, equipped with 4-door,
power windows, locks, mirrors, and driver seat, air conditioning, cruise
control, and 235/55R17 tires. In good condition with good tires. (Odometer
Reads 151,360 Miles) (Interior Fair, Hood Paint Chipped) (Transmission Making
Noise) (PA) |
| 10 |
$3,000.00 |
2016
Ford Escape SE 4x4 Sport Utility Vehicle, VIN# 1FMCU9GX5GUA94173, powered by
1.6L Eco Boost gas engine, automatic transmission, 4-door, power windows,
locks, mirrors, and driver seat, air conditioning, cruise control, 235/55R17
tires, good condition with good tires. (Odometer Reads 140,796 Miles)
(Interior Fair, Hood Paint Chipped) (Transmission Making Noise) (PA) |
| 11 |
$33,000.00 |
2021
RAM Model 2500 Promaster Panel Van, VIN# 3C6LRVCG1ME576886, powered by 3.6L
gas engine and automatic transmission, equipped with high roof, interior
metal cabinets, ladder rack, 8,900lb GVWR, Blue Tooth, power windows and
locks, cruise control, air conditioning, and 225/75R16 tires. In very good
condition with very good tires. (Odometer Reads 11,404 Miles) (PA) |
| 12 |
$10,500.00 |
2015
NISSAN Model NV2500 HD Panel Van, VIN# 1N6AF0LX3FN808010, powered by V-8 gas
engine and automatic transmission, equipped with high roof, interior metal
shelving and bottle rack, ladder rack, power windows and locks, air
conditioning, cruise control, and 245/70R17 tires. In good condition with
good tires. (Odometer Reads 135,280 Miles) (PA) |
| 13 |
$9,500.00 |
2008
FORD Model F-450XL Super Duty, 4x4 Stake Body Truck, VIN# 1FDXF47R68EA73182,
powered by Powerstroke 6.4L diesel engine and automatic transmission,
equipped with 12' flatbed with stake sides and electric lift gate, dual rear
wheels, tow package, cruise control, air conditioning, and 225/70R19.5 tires.
In good condition with good tires. (Odometer Reads 125,651 Miles) (PA
Inspection Expires 12/23) (PA) |
| 14 |
$2,600.00 |
2008
FORD Model F-550XL Super Duty Single Axle Flatbed Truck, VIN#
1FDAF56R08EA19468, powered by Powerstroke 6.4L diesel engine and automatic
transmission, equipped with 16' steel stake bed with 84" metal stake
sides and liftgate, 19,000# GVWR, spring suspension, dual rear wheels, air
conditioning, and 225/70R19.5 tires In poor condition with good tires.
(Mileage Not Available - Battery Dead) (List Stated: 84,163 Miles) (Bed And
Frame Rust) (Not Running) (PA) |
| 15 |
$5,450.00 |
2012
MITSUBISHI FUSO Model FE160 Single Axle Van Body Truck, VIN#
JL6BNG1A9CK002470, powered by Fuso diesel engine and automatic transmission,
equipped with Morgan 16'6" aluminum van body with roll up rear doors and
Maxon 1,500# liftgate, 15,995# GVWR, spring suspension, power windows, air
conditioning, cruise control, steel disc wheels, and 215/75R17.5 tires. In
good condition with good tires. (Odometer Reads 156,166 Miles) (Right Side
Van Body And Front Bumper Damage) (PA) |
| 16 |
$5,100.00 |
2000
INTERNATIONAL Model 4700 Single Axle Van Body Truck, VIN# 1HTSCAAM1YH268174,
powered by International DT466E diesel engine and automatic transmission,
equipped with Morgan 26' aluminum van body with roll up rear and curbside
doors and Waltco liftgate, 25,500# GVWR, spring suspension, and 10R22.5
tires. In good condition with good tires. (Odometer Reads 055,152 Miles)
(Fuel Injectors Need To Be Replaced) (Minor Van Body Damage) (PA) |
| 17 |
$550.00 |
2008
FORD Model F-150XLT, 4x4 Crew Cab Pickup Truck, VIN# 1FTPW14588FB25801,
powered by 5.4L gas engine and automatic transmission, equipped with
5'6" bed with liner and material rack, running boards, power windows,
locks, mirrors, and driver seat, alloy wheels, and 275/65R18 tires. In fair
condition with very good tires. (128,294 Miles) (Driver Seat Torn, Body And
Bed Rust, Minor Body And Front Bumper Damage, Cracked Windshield) (Not
Running) (PA) |
| 18 |
$2,600.00 |
2002
FORD Model E-450 Super Duty Single Axle Passenger Bus, VIN#
1FDXE45S22HB70541, powered by Triton V-10 gas engine and automatic
transmission, equipped with Champion 14 passenger body with rear emergency
exit and seat belts, dual rear tires, front and rear air conditioning, cruise
control, and 225/75R16 tires. In fair condition with good tires. (063,703
Miles) (Runs - Starter Must Be Jumped) (Reconstructed Title) (PA) |
| 19 |
$500.00 |
1994 FORD
Model E-350 Cube Van, VIN# 1FDKE37M8RHB83856, powered by gas engine and
automatic transmission, equipped with Grumman 14' aluminum body with roll up
rear door and liftgate. In poor condition. (Last PA Inspection 2016) (Not
Running) (PA) |
| 20 |
$4,000.00 |
2005
STERLING Model A9500 Single Axle Truck Tractor, VIN# 2FWBA3CV25AU07876,
powered by Mercedes OM460, 450HP diesel engine and Eaton Fuller 10 speed
transmission, equipped with 22,700# rear and 12,000 front axles, air ride
suspension, 150" wheelbase, cab fairings, air conditioning, cruise
control, steel disc wheels, and 295/75R22.5 tires. In good condition with
good tires. (Odometer Reads 541,755 Miles) (Missing Passenger Seat) (PA) |
| 21 |
$4,600.00 |
1985
GREAT DANE 48' Tandem Axle Step Deck Trailer, VIN# 1GRDM9620FM094004,
equipped with 10' upper deck, 37' lower deck, spring suspension, (11) ratchet
strap and D-ring tiedowns, and 225/70R22.5 tires. In good condition with good
tires. (With Contents) (PA) |
| 22 |
$3,100.00 |
1983
CIT Aluminum Tri-Axle Drop Deck Trailer, 42'x96", VIN# ADD2114005, with
9'6" upper deck, 31' lower deck, and air ride suspension. In fair
condition with fair tires. (With Contents) (No Title) (NJ) |
| 23 |
$10.00 |
1980
Shop Made 32' Single Axle Flatbed Trailer, VIN# HAL1715, with bulkhead, steel
construction. In fair condition with fair tires. (VIN# From Records) (With
Contents) (No Title) (NJ) |
| 24 |
$15,250.00 |
2015
DOOSAN Model GC55C-5, 10,450# Cushion Tired Forklift, s/n FGBOE-1290-00062,
powered by LP gas engine and powershift transmission, equipped with 3-stage
mast, 180" lift height, hydraulic side shift, 72" forks, and FOPS
canopy. In good condition with good tires. (Meter Reads 1,310 Hours) (Tank
Not Included) (RESERVED FOR USE DURING LOADOUT UNTIL FRIDAY 10/6/23 at
8:00AM) (PA) |
| 25 |
$9,750.00 |
1998
HYSTER Model S120XL2, 11,700# Solid Tired Forklift, s/n D004D06425V, powered
by LP gas engine and hydrostatic transmission, equipped with 3-stage mast,
208" lift height, 72" manual shift forks, and FOPS canopy. In good
condition with good tires. (Meter Reads 5,381 Hours) (RESERVED FOR USE DURING
LOADOUT UNTIL WEDNESDAY 10/4/23 at 12:00PM NOON) (NJ) |
| 26 |
$6,700.00 |
1994
HYSTER Model S100XL, 10,000# Solid Tired Forklift, s/n D004V08157R, powered
by 4 cylinder LP gas engine and shuttle transmission, equipped with 111"
2-stage mast, power side shift, 60" forks, and FOPS canopy. In good
condition with good tires. (Meter Reads 3,888 Hours) (Tank Not Included)
(RESERVED FOR USE DURING LOADOUT UNTIL FRIDAY 10/6/23 at 8:00AM) (PA) |
| 27 |
$6,100.00 |
2000
HYSTER Model H35XM, 3,300# Cushion Tired Forklift, s/n D001H06210X, powered
by LP gas engine and shuttle transmission, equipped with 3-stage mast,
189" lift height, hydraulic side shift, 48" forks, and FOPS canopy.
In good condition with good tires. (Meter Reads 3,009 Hours) (Tank Not
Included) (RESERVED FOR USE DURING LOADOUT UNTIL TUESDAY 10/10/23 at 8:00AM)
(PA) |
| 28 |
$1,800.00 |
YALE
Model MSW030SCN12TV083 Walk Behind Stacker, s/n B820N03103X, powered by 12V
battery, equipped with 126" lift height, 42" hydraulic spreading
forks, and charger. In good condition. (PA) |
| 29 |
$310.00 |
G941
Electric Pallet Jack, s/n Not Available, 110V charger, equipped with 42"
forks. (Meter Reads 238 Hours) (Not Running) (PA) |
| 30 |
$5,750.00 |
1997
GROVE Model SM3884XT, 38', 4x4 Scissor Lift, s/n 41042, powered by 3 cylinder
gas engine and hydraulic drive, equipped with 74"x140" platform,
48" platform extension, 1,250# capacity, and 10-16.5 tires. In fair
condition with good tires. (Meter Reads 1,156 Hours) (PA) |
| 31 |
$1,600.00 |
1997
JLG Model 2646E, 26' Scissor Lift, s/n 200037623, battery powered electric,
equipped with 43" x 98" platform, 50" platform extension, 750#
capacity, and non marking tires. In fair to good condition. (PA) |
| 32 |
$650.00 |
JLG
Model 2646E, 26' Scissor Lift, s/n 200040065 (Not Running - No Batteries)
(PA); 1998 JLG Model 2032E2, 20' Scissor Lift, s/n 200044469 (Not Running)
(PA); 1998 JLG Model 2033E, 20' Scissor Lift, s/n 200041491 (Not Running)
(PA) |
| 32A |
$13,500.00 |
2021
TRIMBLE Model RTS673 Robotic Total Station, s/n 74130309, equipped with
accessories and carrying cases. In good condition. (PA) |
| 32B |
$17,000.00 |
2021
TRIMBLE Model RTS673 Robotic Total Station, s/n 74130294, equipped with
accessories and carrying cases. In good condition. (PA) |
| 33 |
$7,500.00 |
2015
TRIMBLE Model RTS873 Robotic Total Station, s/n 73710312, equipped with
accessories and carrying case. In good condition. (PA) |
| 34 |
$15,500.00 |
TRIMBLE
Model RTS673 Robotic Total Station, s/n 73710006, equipped with accessories
and carrying case. In good condition. (PA) |
| 35 |
$8,500.00 |
2017
TRIMBLE Model TX6, 3D Laser Scanner, s/n 94616052, equipped with accessories
and carrying case. In good condition. (PA) |
| 36 |
$7,500.00 |
2015
TRIMBLE Model TX8 3D Laser Scanner, s/n 94510176, equipped with accessories
and carrying case. In good condition. (PA) |
| 37 |
$6,000.00 |
2009
MILLER Model PipeWorx 400 Multiprocessor Welding System, s/n LK220114G /
Stock# 907382, 230/460V, equipped with 2009 Pipeworx dual feeder, s/n
LK220042G, with MIG guns, cart mounted In good condition. (PA) |
| 38 |
$2,250.00 |
2009
MILLER Model Millermatic 252 MIG Welder, s/n LK130332N / Stock# 907322,
230/460/575V, with wire gun and MIG gas bottle, cart mounted. In good
condition. (NJ) |
| 39 |
$1,000.00 |
2001
MILLER Model Millermatic 250X MIG Welder, s/n LB181390 / Stock# 903770,
230/460/575V, equipped with wire gun and MIG gas bottle, cart mounted. In
good condition. (NJ) |
| 40 |
$1,700.00 |
2001
MILLER Model Millermatic 250X MIG Welder, s/n LB087408/ Stock# 903770,
230/460/575V, equipped with wire gun and MIG gas bottle, cart mounted. In
good condition. (NJ) |
| 41 |
$800.00 |
1999
LINCOLN Model Square Wave Tig 275 TIG Welder, s/n U1990107504 / Code# 10605,
208/230/460V, equipped with Lincoln TIG Pulser controller, Tig torch, foot
pedal control, cart mounted. In good condition. (PA) |
| 42 |
$800.00 |
2001
LINCOLN Model Power Mig 255 MIG Welder, s/n U1010305353 / Code # 10563,
208/230V, cart mounted. In good condition. (PA) |
| 43 |
$800.00 |
2021
MILLER Model Millermatic 180 Auto-Set MIG Welder, s/n MB100525N / Stock#
907312, 230V, cart mounted. In good condition. (PA) |
| 44 |
$800.00 |
1999
MILLER Model Millermatic 185 MIG Welder, s/n KK062168 / Stock# 903497,
200/230V, equipped with Miller Spoolmate 185 wire gun, cart mounted. In good
condition. (PA) |
| 45 |
$33,750.00 |
VICTAULIC
Model VE414MC Roll Grooving Machine, s/n 414M327, 208/230V, equipped with
foot pedal control, VAP131R fabrication system, s/n 131PS105 with hydraulic
adjustable pipe stand, 12" track system, 36"x72" assembly
table, and (2) adjustable positioners. In good condition. (PA) |
| 46 |
$1,000.00 |
2010
MSC Model MH-916JRP Horizontal Metal Cutting Bandsaw, s/n 99283607, 2HP,
9" capacity, cart mounted. In good condition. (PA) |
| 47 |
$1,600.00 |
EAST
COAST 20' x 5' Plasma Cutting System, s/n Not Available / Not Available,
equipped with (2) 10'x5' burn tables, Kaliburn SR-45i, 45 amp plasma cutting
system, 220-240/440-480V, single torch, router cutting head, (2) Cook 4,000
CFM exhaust system, and CNC controls. In good condition. (Loadout Thursday
10/5/23) (Rigging Fee $3,750) (NJ) |
| 48 |
$2,250.00 |
EAST
COAST 10' x 5' Plasma Cutting System, s/n Not Available / 15770509,
equipped with 10'x5' burn table, Kaliburn SR-45i, 45 amp plasma cutting
system, 220-240/440-480V, single torch, Bosch #16176 router cutting head,
Cook 4,000 CFM exhaust system, and CNC controls. In good condition. (Loadout
Thursday 10/5/23) (Rigging Fee $3,100) (NJ) |
| 49 |
$5,000.00 |
LOCKFORMER
Model Vulcan Plus 10 Plasma Cutting System, s/n VULGRYUS107408 / 65-050426,
equipped with 20'x5' burn table, Hypertherm Powermax 65 plasma cutting
system, single torch, exhaust system, and Mestek CNC controls. In good
condition. (Duct Work Not Included) (Loadout Thursday 10/12/23) (Rigging Fee
$3,500) (PA) |
| 50 |
$900.00 |
TENNSMITH
4' Manual Box and Pan Brake, s/n Not Available. In fair to good condition.
(PA) |
| 51 |
$1,000.00 |
ROPER
WHITNEY Model 816, 8'x16 GA Manual Brake, s/n 3621-7-00. In fair to good
condition. (NJ) |
| 52 |
$2,300.00 |
CHICAGO
W37, 8' Manual Box and Pan Brake 109813 fair to good condition. (PA) |
| 53 |
$1,200.00 |
8'
Manual Brake, s/n Not Available, WHITNEY Manual Punch, Manual Cutter, and
Bench Vise. In fair to good condition. (PA) |
| 54 |
$5,000.00 |
ROTO-DIE
Model 15, 10'x14 GA Hydraulic Press Brake, s/n 98408, 15HP, equipped with die
adjust, (3) 39" front and (3) 39" rear support arms, and foot pedal
control. In fair to good condition. (Loadout Thursday 10/5/23) (Rigging Fee
$1,250) (NJ) |
| 55 |
$4,750.00 |
FECO
/ ROTO - DIE Model 15, 10'x14 GA Hydraulic Press Brake, s/n 82333, 15HP,
equipped with die adjustment, rear operated back gauge, (3) 39" front
and (2) rear support arms, and foot pedal control. In good condition.
(Loadout Thursday 10/12/23) (Rigging Fee $1,250) (PA) |
| 56 |
$15,000.00 |
1997
ADIRA Model GHS-0630, 10'x1/4" Hydraulic Squaring Shear, s/n 3227 /
8764D, 220/440V, equipped with 34" left hand squaring arm, 13"x10'
feed table, (2) 24" front support arms, and power back gauge. In good
condition. (New Set of Dies) (Loadout Thursday 10/12/23) (Rigging Fee $1,250)
(PA) |
| 57 |
$1,800.00 |
CINCINNATI
Model 1010, 10'x10 GA Mechanical Shear, s/n 32926, equipped with 120"
squaring arm, 20"x10 feed table, (2) front 54" support arms, 11
hold downs, power back gauge, foot bar control, and 15 KVA transformer. In
fair to good condition. (Loadout Thursday 10/5/23) (Rigging Fee $1,250) (NJ) |
| 58 |
$1,800.00 |
MUBEA
Model HPS250, 28 Ton Ironworker, s/n 0150886428825, 220V, equipped with
punch, 3"x3" angle and 6" plate shears, and notcher. In fair
to good condition. (NJ) |
| 59 |
$5,500.00 |
1989
ROUNDO Model AB IP 110/5, 60"x10 GA Pyramid Roll, s/n 1832, electric
powered, equipped with (3) 4" rolls and foot pedal control. In good
condition. (PA) |
| 60 |
$4,500.00 |
1988
ROUNDO Model AB IP 110/5, 60"x10 GA Pyramid Roll, s/n 1715, electric
powered, equipped with (3) 4" rolls and foot pedal control. In fair to
good condition. (NJ) |
| 61 |
$400.00 |
PEXTO
30"x2" Pyramid Roll, s/n Not Available, 1/2HP, equipped with (3)
rolls and foot pedal control, table mounted. In fair to good condition. (NJ) |
| 62 |
$350.00 |
PEXTO
Model 381D, 36"x22 GA Pyramid Roll, s/n 51, equipped with (3) rolls,
stand mounted. In fair to good condition. (PA) |
| 63 |
$600.00 |
SCOTCHMAN
Model CPO350 HT, 14" Circular Cold Saw, s/n B70240405, 2.5/2 HP,
equipped with variable speed, rotary table, 10'x10" infeed and
10'x7" outfeed roller tables. In fair to good condition. (Plus Hardware
and Supplies On Rack - BUYER MUST LOAD) (NJ) |
| 64 |
$2,250.00 |
LORS
Model 150AR-DV, 50 KVA Rocker Arm Spot Welder, s/n 802-7240, 220V, equipped
with 34" throat, adjustable work height, Cutter Hammer # T20P11550,
single phase dry type distribution transformer, Dynaflux Pro Coll II cooling
system, iii 108 microprocessor control, and foot pedal control. In good
condition. (NJ) |
| 65 |
$1,100.00 |
ROPER
WHITNEY 15KVA Rocker Arm Spot Welder, s/n EH922, 230V, equipped with 24"
throat, adjustable height, and foot pedal control. In good condition. (PA) |
| 66 |
$4,300.00 |
DURO
DYNE Model RH Rolling Head Pin Spotter, s/n 1369, equipped with 60"
manual insulation roller with cutters, parts feeder, 60"x20' and
67"x73" layout tables. In fair condition. (PA) |
| 67 |
$3,000.00 |
DURO
DYNE Model RH Rolling Head Pin Spotter, s/n Not Available, equipped with
60" layout tables and parts feeder. In fair condition. (With
Approximately (50) Buckets of Superpoint Weld Pins) (NJ) |
| 68 |
$500.00 |
DURO
DYNE Model MFPT Compact Pinspotter, s/n unknown (plate damage), 220V,
equipped with inserter gun, bench mount. In fair condition. (PA) |
| 68A |
$10.00 |
LOCKFORMER
Electric Over Hydraulic Multi-Head Notcher, with (5) heads, foot control,
rolling table with toolbox, and metal shelf of miscellaneous tools and
screws. In fair condition. (PA) |
| 69 |
$50.00 |
RUOFF
Model 2657B Notcher. In fair condition. (PA) |
| 70 |
$8,500.00 |
LOCKFORMER
Model TDC Roll Former, s/n Not Available, (14) station. In fair to good
condition. (NJ) |
| 71 |
$9,000.00 |
ENGEL
Model M1640, 18-26 GA Roll Former, s/n 121396-96, 7.5HP, equipped with 16
station and umbilical remote, portable. In good condition. (PA) |
| 72 |
$5,000.00 |
LOCKFORMER
Model 20 GA Roll Former, s/n FB-LS2018180, (5) station. In good condition.
(PA) |
| 73 |
$2,500.00 |
LOCKFORMER
Model SS20, 20 GA Roll Former, s/n SS2310, (5) station. In good condition.
(PA) |
| 74 |
$2,500.00 |
LOCKFORMER
Model SS20, 20 GA Roll Former, s/n SSFS3307, (5) station. In fair to good
condition. (NJ) |
| 75 |
$2,500.00 |
LOCKFORMER
Model 20 GA Roll Former, s/n 2996, (5) station. In fair to good condition.
(NJ) |
| 76 |
$2,500.00 |
LOCKFORMER
Model 20 GA Roll Former, s/n unknown (plate damaged). In fair condition. (NJ) |
| 77 |
$2,500.00 |
1989
LOCKFORMER Model 22 GA Cleatformer Roll Former, s/n C13603, (9) station. In
fair to good condition. (NJ) |
| 78 |
$2,500.00 |
LOCKFORMER
Model 6016, 16-30 GA Beading Roll Former, s/n FB060130, 5 bead, 60"
capacity. In fair to good condition. (NJ) |
| 79 |
$1,700.00 |
LOCKFORMER
Model AGF-16, 16 GA Auto Guide Flanger, s/n AG3631. In fair to good
condition. (NJ) |
| 80 |
$2,400.00 |
LOCKFORMER
Model AGF-16, 16 GA Auto Guide Flanger, s/n FB-AGF1618259. In good condition.
(PA) |
| 81 |
$1,300.00 |
LOCKFORMER
Model - Cleatformer Roll Former, s/n C13080 (partial plate -damaged), (9)
station. In fair condition. (PA) |
| 82 |
$1,350.00 |
1989
ROPER WHITNEY / PEXTO Model 3617-D Combination Rotary Machine, s/n 579-3-89,
equipped with 18 GA capacity, 13" throat, and foot pedal control. In
fair condition. (PA) |
| 83 |
$300.00 |
1958
NIAGARA #180 Combination Rotary Machine, s/n 71612, 1HP, equipped with foot
pedal control. In fair condition. (NJ) |
| 84 |
$50.00 |
R.T.
SMITH MANUFACTURING Model 2024VP, 24"x20 GA Vertical Cleat Bender, s/n
R0208741503, equipped with 30"x72" hydraulic table and foot pedal
control. In fair condition. (PA) |
| 85 |
$150.00 |
TENNSMITH
Model CB24, 24"x20 GA Manual Cleat Bender, s/n 16656 good condition.
(PA) |
| 86 |
$25.00 |
TENNSMITH
Model CB 18, 18" Manual Cleat Bender, s/n Not Available. In fair
condition. (NJ) |
| 87 |
$100.00 |
RAMS
24" Manual Cleat Bender, s/n Not Available. In good condition. (Table
Mounted with Extra Table) (NJ) |
| 88 |
$100.00 |
24"
Manual Bender, 22" Manual Bender, LOCKFORMER 18" Cleat Bender, and
Rolling Table. In good condition. (PA) |
| 89 |
$250.00 |
Hydraulic
C-Frame Punch, 5" center, table mounted. (PA) |
| 90 |
$250.00 |
HARPER
/ ENGEL Cut-To-Length Angle Iron Machine, s/n Not Available, equipped with
shear, punch, and Cooper Weymouth uncoiler s/n ALINE. In fair to good
condition. (With (11) UNUSED Coils and Product) (Loadout Thursday 10/5/23)
(Rigging Fee $4,350) (NJ) |
| 91 |
$16,500.00 |
2009
JETLINE ENGINEERING Model LWS-60Z, 60" Longitudinal Seam Welding
Machine, s/n 090009, equipped with (2) series 9600 controls, CWF-50 wire
feeder, s/n 090011, 2009 Miller Maxstar 350, s/n LK021269L, stock # 907334.
In good condition. (Loadout Wednesday 10/11/23) (Rigging Fee $1,250) (PA) |
| 92 |
$7,500.00 |
2000
ENGEL Model M-516PS-V Pittsburgh Seam Closer, s/n 224-2000, 230V, equipped
with 5HP hydraulic power unit and 60"x16-26 GA. In good condition.
(Loadout Wednesday 10/11/23) (Rigging Fee $1,250) (PA) |
| 93 |
$60,500.00 |
2002
SPIRAL - HELIX 200L Spiral Tube Forming Machine, s/n 4010202, equipped with
pneumatic track mounted vertical uncoiler, (21) dies 4" - 44",
forming heads, and discharge conveyor. In good condition. (Loadout Thursday
10/12/23) (Rigging Fee $3,600) (PA) |
| 94 |
$270,000.00 |
2012
Iowa Precision Pro-Fabriduct HVAC Full Coil Line System (NJ) consisting of:
Reel Uncoiling System: (3) GFD6S7212K-LP-H-M, 2-Reel Uncoilers, S/N 2012,
72" width reel capacity, hydraulic motor drives and reel hold downs and
individual feeder paths; CS6S72 coil select station, S/N 20212, pinch rolls;
Pro-Ductomatic PD7214-LF Processing System, S/N PD120901, 14 GA, beader,
notching units, cleat roller, sheer/brake head; TT 614-MKXV-FO Left Hand
Transfer Table, S/N TT120901-MKXV-FO, 90-degree transfer; Single Side
Seam Roll Former, (2) sets of forming rolls, transfer table; TT614 TDC
Flange Roll Forming System, S/N TT120902, TDC, 96" transfer table,
90-degree transfer, dual side TDC flange forming station, umbilical remote
operation; TM6EG-DD Insulation and Pinning System S/N IM120901, gluing
system, single insulation roll, squaring arm, insulation knife, Dura Dyne
FGMH multihead pin spotter S/N 400-914 with (6) VPF-2 vibratory parts feeder
heads; B6W-SC Wrap Brake S/N B6W120902, 10 HP; Pedestal Mounted CNC Programable
Controls with display screen, (2) control cabinets, S/N PD120901, CD#2936-00,
480V, 3 phase, 60 Hertz (With Tables and Product) (Loadout Wednesday 10/4/23)
(Rigging Fee $16,950) |
| 95 |
$10,000.00 |
2009
IOWA PRECISION Model FAH-1672-VP, Pro-XVI, Whisper-Loc Seam Closing Machine,
s/n FAH120901, 3HP, equipped with 16 GA capacity, 18" to 72"
adjustable height, foot pedal control, and 32.5"x35" in floor
opening. In good condition. (Loadout Wednesday 10/4/23) (Rigging Fee $1,250)
(NJ) |
| 96 |
$11,000.00 |
2009
IOWA PRECISION Model CM-C-HDA Dual Head Cornermatic Corner Insertion Machine,
s/n CM120901, equipped with 60"x18 GA capacity, 15"x15" base,
and 36"x36" in floor opening. In good condition. (With UNUSED
Hardware) (Loadout Wednesday 10/4/23) (Rigging Fee $1,250) (NJ) |
| 97 |
$17,500.00 |
2000
Engel Compact II Coil Line HVAC Duct Manufacturing System (PA) consisting of:
Reel Uncoiling System, (5) reel uncoiler, 60" width reel capacity, reel
hold downs and individual feeder paths; M516UCII Processing System, S/N
222-2000, 10 HP, 16 GA, straightener, beader, (4) notching units,
shear; M-10-5TR 3-Table Right Hand Transfer System, S/N 282-000, 13
HP; DH-800 CEF Cleat Edge Former S/N 2101-00, 3 HP; M-4616DH TDF
Roll Forming Machine S/N 223-2000, 10 HP; M-516-HWB Wrapper Brake, S/N
1751-00, 12 HP; Pedestal Mounted Controls with AMS CNC Programmable
Controls with display panel (AMS Controls Upgrade Performed In 2019) (Loadout
Wednesday 10/11/23) (Rigging Fee $15,350) |
| 98 |
$9,000.00 |
2000
IOWA PRECISION Model CM-F-DH Dual Head Cornermatic Corner Insertion Machine,
s/n CM0001, equipped with 55"x18 GA capacity and 48" radius table.
In good condition. (Loadout Wednesday 10/11/23) (Rigging Fee $1,250) (PA) |
| 99 |
$5,000.00 |
(3)
60" Coils, 22 Gauge, Carbon Coated Galvanized 3/32 Round Punched (PA) |
| 100 |
$5,750.00 |
(2)
60" Coils, 18 Gauge and 20 Gauge, 304 Stainless Steel (NJ) |
| 101 |
$3,250.00 |
(1)
60" Coil, 16 Gauge Cold Rolled Mild Steel, (1) 60" Coil, 24
Gauge, Galvanneal, (1) 60" Aluminum, (1) 60" 20 Gauge
Galvanneal (short roll) (NJ) |
| 102 |
$1,000.00 |
56"
x 250' Coil, 16 Gauge, Galvanized (NJ) |
| 103 |
$2,100.00 |
(2)
48" Coils, 16 Gauge, Galvanized and (2) 60" Coils (NJ) |
| 104 |
$14,500.00 |
West
Chester, PA Storage Unit Consisting of: HUSKY C303H Portable 30 Gallon
Electric Air Compressor; LINCOLN X-Tractor Mini HEPA Vac; GENIE SLC-24
Material Lift; (2) Pallet Jacks; (1) MILWAUKEE M12 Propex Expansion
Tool; (1) MILWAUKEE M18 Porta Band Saw, 18 volt battery; (4)
MILWAUKEE M18 Grinders; (1) MILWAUKEE M18 Saws All; (2) MILWAUKEE
M18 Impact Drivers; (1) MILWAUKEE M18 Rotary Hammer SDS-Plus; (3) RIDGID
24" Pipe Wrenches; (2) RIDGID 18" Pipe Wrenches; (1) RIDGID
16" Pipe Wrench; (3) RIDGID Board Mounted Punch Sets; RIDGID
258, 2-1/2"; 8" Pipe Cutter; (8) Welding Screens; (3)
KNAACK 4830 JobMaster Chests, on wheels; (1) KNAACK 4824 JobMaster
Chest, on wheels; (2) KNAACK 109 JobMaster Cabinets, on wheels; (1)
GREENLEE Rolling Gang Box; (6) Pipe Stands; (3) Metal Platform
Carts; (4) RIDGID Tri-Stands; (29) Ladders: LOUISVILLE and WERNER Fiberglass
Step Ladders To Include: (7) 10'; (13) 8'; (1) 6'; (1)
8' Podium; (5) 6' Podiums; (2) 4' Podiums; (1) 24'
Fiberglass Extension Ladder; (2) BAKER Scaffolding Sets; (13)
Plastic Rolling Shop Carts; (4) Single Bottle Carts, solid
wheels; (12) Fall Arrestors and Safety Harnesses; Plus: Extension
Cords; Nylon Slings; Hardware; (2) DELL Computer Monitors (BUYER
MUST LOAD) (West Chester, PA Storage Unit) (No Inspection) |
| 200 |
$425.00 |
SHARP
MX3050V Color/Fax/Scan Copier. In good condition. (NJ) |
| 201 |
$900.00 |
OCE
Plot Wave 360 Blueprint Scan/Copier, with paper. In good condition. (NJ) |
| 202 |
$1,100.00 |
1997
STRICK 45' Tandem Axle Aluminum Van Trailer, VIN# 1S12S8454VD416392, equipped
with 96" width, spring suspension, roll up rear door, and 295/75R22.5
tires. In fair condition with fair tires. (With Contents) (PA) |
| 203 |
$600.00 |
1984
STOUGHTON 48' Tandem Axle Van Trailer, VIN# 1DW1A4826E3456105. In fair to
good condition with good tires. (With Contents) (NJ) |
| 204 |
$550.00 |
1980
STRICK 45' Tandem Axle Van Trailer, VIN# 4218673. In fair to good condition
with good tires. (VIN# From Registration) (With Contents) (NJ) |
| 205 |
$950.00 |
1989
STRICK 48' Tandem Axle Van Trailer, VIN# 1S12E8483KD314949. In good condition
with good tires. (With Contents) (NJ) |
| 206 |
$10.00 |
1985
VANCO 45' Tandem Axle Van Trailer, VIN# 1VVV45202F1005435. In fair condition
with fair tires. (Empty) (No Title - Storage Only) (NJ) |
| 207 |
$18.00 |
1985
VANCO 45' Tandem Axle Van Trailer, VIN# 1VVV45201F1005426. In good condition
with good tires. (With Contents) (No Title - Storage Only) (NJ) |
| 208 |
$550.00 |
1977
GREAT DANE 45' Tandem Axle Van Trailer, VIN# 2B01329. In fair condition with
fair tires. (VIN# From Records) (With Contents) (No Title - Storage Only)
(NJ) |
| 209 |
$160.00 |
1976
GREAT DANE 45' Tandem Axle Van Trailer, VIN# 1GDN7366176. In fair condition
with fair tires. (VIN# From Records) (With Contents) (NJ) |
| 210 |
$750.00 |
1977
GREAT DANE 45' Tandem Axle Van Trailer, VIN# 179446. In fair condition with
fair tires. (VIN# From Records) (With Contents) (NJ) |
| 211 |
$850.00 |
1989
FRUEHAUF 48' Tandem Axle Van Trailer, VIN# 1H2V04826KB000733. In fair
condition with fair tires. (With Contents) (NJ) |
| 212 |
$350.00 |
1989
STRICK 48' Tandem Axle Van Trailer, VIN# 1S12E8487KD314954. In fair condition
with fair tires. (With Contents) (No Title - Storage Only) (NJ) |
| 213 |
$375.00 |
1989
STRICK 48' Tandem Axle Van Trailer, VIN# 1S12E8485KD314953. In fair condition
with fair tires. (With Contents) (No Title - Storage Only) (NJ) |
| 214 |
$325.00 |
1980
STRICK 45' Tandem Axle Van Trailer, VIN# 4218796. In fair condition with fair
tires. (VIN# From Records) (With Contents) (No Title - Storage Only) (NJ) |
| 215 |
$160.00 |
1979
FRUEHAUF 45' Tandem Axle Van Trailer, VIN# HPV666237. In fair condition with
fair tires. (With Contents) (No Title - Storage Only) (NJ) |
| 216 |
$500.00 |
1989
STRICK 48' Tandem Axle Van Trailer, VIN# 1S12E8483KD314952. In fair condition
with fair tires. (With Contents) (No Title - Storage Only) (NJ) |
| 217 |
$160.00 |
1989
STRICK 48' Tandem Axle Van Trailer, VIN# 1S12E8481KD314948. In fair condition
with fair tires. (With Contents) (No Title - Storage Only) (NJ) |
| 218 |
$21.00 |
5'
x 5' Steel Product Cart, with scrap contents (NJ) |
| 219 |
$2,000.00 |
GENIE
SLC-24 Material Lift (NJ) |
| 220 |
$1,800.00 |
GENIE
SLC-24 Material Lift (NJ) |
| 221 |
$2,300.00 |
GENIE
SLC-18 Material Lift (UNUSED) (NJ) |
| 222 |
$1,200.00 |
GENIE
SLC-18 Material Lift (NJ) |
| 223 |
$1,900.00 |
SUMNER
2020 Material Lift (NJ) |
| 224 |
$2,500.00 |
SUMNER
2020 Material Lift (NJ) |
| 225 |
$0.50 |
(5)
VERMETTE Material Lifts (NJ) |
| 226 |
$0.50 |
(5)
VERMETTE Material Lifts (NJ) |
| 227 |
$0.50 |
(5)
VERMETTE Material Lifts (NJ) |
| 228 |
$6.50 |
(5)
VERMETTE Material Lifts (NJ) |
| 229 |
$9.00 |
(5)
VERMETTE Material Lifts (NJ) |
| 230 |
$130.00 |
(4
Sections) HAUL MASTER Rolling Scaffolding (NJ) |
| 231 |
$120.00 |
(4
Sections) HAUL MASTER Rolling Scaffolding (NJ) |
| 232 |
$0.01 |
(9)
Miscellaneous Tires and Rims (NJ) |
| 233 |
$0.01 |
(8)
Miscellaneous Tires and Rims (NJ) |
| 234 |
$750.00 |
(9)
Gas Bottles To Include: (5) 75% Argon/25% Carbon Dioxide; (3) 90% Helium/7.5%
Argon/2.5% Carbon Dioxide; (1) 100% Argon (NJ) |
| 235 |
$110.00 |
(4 Spools)
316 Stainless Steel .030 Welding Wire and (4 Spools) 308 Stainless Steel .030
Welding Wire (NJ) |
| 236 |
$600.00 |
(11
Spools) MIG Wire (NJ) |
| 237 |
$110.00 |
(12
Spools) 308, 316, and 309 Stainless Steel .030 and .035 Welding Wire (NJ) |
| 238 |
$210.00 |
(29
Spools) INWELD ER403 Aluminum .030 Welding Wire (NJ) |
| 239 |
$17.00 |
(4
Spools) Gasless Flux Cored .030 Welding Wire and (8 Spools) 18 Gauge Soft
Galvanized Wire (NJ) |
| 240 |
$100.00 |
Metal
Table, with shrink wrap, power cords, and hardware (NJ) |
| 241 |
$210.00 |
(3)
Pallet Jacks (NJ) |
| 242 |
$100.00 |
(2)
Pallet Jacks (NJ) |
| 243 |
$110.00 |
(2)
Pallet Jacks (NJ) |
| 244 |
$75.00 |
Banding
Cart and Tools (NJ) |
| 245 |
$90.00 |
(2)
Aluminum Dock Plates (NJ) |
| 246 |
$65.00 |
Fall
Protection (NJ) |
| 247 |
$110.00 |
Fall
Protection (NJ) |
| 248 |
$130.00 |
Fall
Protection (NJ) |
| 249 |
$60.00 |
Fall
Protection (NJ) |
| 250 |
$21.00 |
Metal
Table and Contents of Shelf (NJ) |
| 251 |
$850.00 |
MILLER
Welder, Welding Accessories, and Metal Table (NJ) |
| 252 |
$170.00 |
(3)
Gas Bottles (90% Helium/7.5% Argon/2.5% Carbon Dioxide) with (2) carts and
hoses (NJ) |
| 253 |
$110.00 |
Heavy
Duty Extension Cords (NJ) |
| 254 |
$30.00 |
(2)
MAKITA Cordless Hammer Drills (NJ) |
| 255 |
$23.00 |
(2)
MAKITA Cordless Hammer Drills (NJ) |
| 256 |
$35.00 |
(2)
MAKITA Cordless Hammer Drills (NJ) |
| 257 |
$23.00 |
(2)
MAKITA Cordless Hammer Drills (NJ) |
| 258 |
$30.00 |
(2)
MAKITA Cordless Hammer Drills (NJ) |
| 259 |
$35.00 |
(2)
MAKITA Cordless Hammer Drills (NJ) |
| 260 |
$40.00 |
(2)
MAKITA Cordless Hammer Drills (NJ) |
| 261 |
$35.00 |
(2)
MAKITA Cordless Hammer Drills (NJ) |
| 262 |
$40.00 |
(2)
MAKITA Cordless Hammer Drills (NJ) |
| 263 |
$30.00 |
Miscellaneous
MAKITA Cordless Hammer Drills, Chargers, and Batteries (NJ) |
| 264 |
$210.00 |
(2)
MILWAUKEE Cordless Hammer Drills (NJ) |
| 265 |
$80.00 |
(3)
MILWAUKEE Cordless Sawzalls (NJ) |
| 266 |
$55.00 |
(3)
MILWAUKEE Cordless Sawzalls (NJ) |
| 267 |
$35.00 |
(3)
MILWAUKEE Cordless Sawzalls (NJ) |
| 268 |
$85.00 |
(10)
MILWAUKEE Cordless Nibblers (No Batteries) (NJ) |
| 269 |
$150.00 |
Miscellaneous
MILWAUKEE Screw Shooters (No Batteries) (NJ) |
| 270 |
$100.00 |
Miscellaneous
MILWAUKEE Cordless Drills (No Batteries) (NJ) |
| 271 |
$40.00 |
Miscellaneous
DEWALT Cordless Drills and Chargers, and (2) Band Saws (NJ) |
| 272 |
$120.00 |
MILWAUKEE
Chargers (NJ) |
| 273 |
$50.00 |
MILWAUKEE
Chargers and Batteries (NJ) |
| 274 |
$75.00 |
(3)
Metal Rolling Tables (NJ) |
| 275 |
$400.00 |
Contents
of Room: miscellaneous tools, parts, accessories, and pallet rack (BUYER MUST
LOAD) (NJ) |
| 276 |
$220.00 |
Pneumatic
Impact Hammers (NJ) |
| 277 |
$70.00 |
Rolling
Toolbox and Contents (NJ) |
| 278 |
$60.00 |
(4)
Pipe Stands (NJ) |
| 279 |
$60.00 |
Rolling
Cart and Miscellaneous Power Tools (NJ) |
| 280 |
$95.00 |
(5)
Powder Actuated Fasteners (NJ) |
| 281 |
$40.00 |
(5)
Reciprocating Saws (NJ) |
| 282 |
$1.00 |
(6)
Reciprocating Saws (NJ) |
| 283 |
$1.50 |
(6)
Reciprocating Saws (NJ) |
| 284 |
$15.00 |
(5)
Reciprocating Saws (NJ) |
| 285 |
$50.00 |
(3)
MILWAUKEE Band Saws (NJ) |
| 286 |
$55.00 |
(3)
MILWAUKEE Band Saws (NJ) |
| 287 |
$60.00 |
(2)
DEWALT Band Saws (NJ) |
| 288 |
$6.50 |
(5)
KETT Nibblers (NJ) |
| 289 |
$4.25 |
(5)
KETT Nibblers (NJ) |
| 290 |
$6.50 |
(5)
KETT Nibblers (NJ) |
| 291 |
$5.50 |
(5)
KETT Nibblers (NJ) |
| 292 |
$13.00 |
(2)
DEWALT Nibblers (NJ) |
| 293 |
$90.00 |
(8)
MAKITA Sheet Metal Saws (NJ) |
| 294 |
$40.00 |
(8)
Electric Grinders (NJ) |
| 295 |
$120.00 |
(2)
DEWALT and (2) MILWAUKEE Hammer Drills (NJ) |
| 296 |
$21.00 |
(2)
Metal Tables and Hardware (BUYER MUST LOAD) (NJ) |
| 297 |
$90.00 |
Pallet
Racking and Contents (BUYER MUST LOAD) (NJ) |
| 298 |
$60.00 |
Chains
and Binders (NJ) |
| 299 |
$95.00 |
Jacks
and Chain Hoists (NJ) |
| 300 |
$220.00 |
(2)
Electric Hoists (NJ) |
| 301 |
$350.00 |
(2
Sets) HILLMAN Multi Ton Rollers (NJ) |
| 302 |
$160.00 |
(2)
Johnson Bars (NJ) |
| 303 |
$50.00 |
(4)
Hand Trucks (NJ) |
| 304 |
$350.00 |
(2)
Shop Vacs and (2) Shop Fans (NJ) |
| 305 |
$240.00 |
(6)
Pedestal Fans and Refrigerator (NJ) |
| 306 |
$130.00 |
Sheet
Metal Sheets, Insulation, and Racks (BUYER MUST LOAD) (NJ) |
| 307 |
$35.00 |
Sheet
Metal Sheets, Insulation, Screens, and Racks (BUYER MUST LOAD) (NJ) |
| 308 |
$25.00 |
Cart
and Parts (NJ) |
| 309 |
$400.00 |
INGERSOLL
RAND Model 2545K10-P, 10HP Vertical Air Compressor, s/n CBV199846, 460V,
equipped with 120 gallon tank. In good condition. (NJ) |
| 310 |
$50.00 |
Cabinet
and Welding Supplies (NJ) |
| 311 |
$5.00 |
Miscellaneous
Parts, Hardware, and Rolling Carts (BUYER MUST LOAD) (NJ) |
| 312 |
$16.00 |
(3)
INNER LOGIC SR-45i Plasma Systems (Condition Unknown) (NJ) |
| 313 |
$5.50 |
Miscellaneous
Hangers (NJ) |
| 314 |
$2.25 |
THERMAFLEX
Ducting (In Loft) (BUYER MUST LOAD) (NJ) |
| 315 |
$170.00 |
Contents
of Office, Lunch Room, and Parts Room: pallet racking, parts, furniture, etc.
(BUYER MUST LOAD) (NJ) |
| 316 |
$6,750.00 |
RIDGID
1224 Portable Threader (PA) |
| 317 |
$500.00 |
RIDGID
535 Portable Threader (PA) |
| 318 |
$500.00 |
RIDGID
802 Portable Threader (PA) |
| 319 |
$1,800.00 |
RIDGID
535 Portable Threader (PA) |
| 320 |
$800.00 |
RIDGID
535 Portable Threader (PA) |
| 321 |
$900.00 |
RIDGID
300 Pipe Threader, with tri-stand (PA) |
| 322 |
$750.00 |
RIDGID
300 Pipe Threader, with tri-stand (PA) |
| 323 |
$900.00 |
RIDGID
300 Pipe Threader, with tri-stand (PA) |
| 324 |
$750.00 |
RIDGID
300 Pipe Threader, with tri-stand (PA) |
| 325 |
$450.00 |
RIDGID
700 Pipe Threader (Not Running) and RIDGID Manual Threader Set (PA) |
| 326 |
$400.00 |
Large
Quantity Pipe Wrenches (PA) |
| 327 |
$220.00 |
Pipe
Cutters, Reamers, and Threading Accessories, with cart (PA) |
| 328 |
$2,300.00 |
(3)
Hydraulic Pipe Cutters (PA) |
| 329 |
$950.00 |
(3)
Tri-Stands and Threading accessories, with cart (PA) |
| 330 |
$850.00 |
(6)
Tri-Stands (PA) |
| 331 |
$750.00 |
(9)
Tri-Stands (PA) |
| 332 |
$550.00 |
(6)
Tri-Stands (PA) |
| 333 |
$500.00 |
(6)
Tri-Stands (PA) |
| 334 |
$650.00 |
(2)
RIDGID 122 Cutting/Prep Machines (PA) |
| 335 |
$325.00 |
Oilers
and Cart (PA) |
| 336 |
$60.00 |
SUHNER
Pipe Grinder (PA) |
| 337 |
$500.00 |
2011
VICTAULIC Model VE106 OGS Original Groove System, s/n CNG782 (PA) |
| 338 |
$1,300.00 |
1998
LINCOLN Ranger 8 Portable Welder, s/n U1980308843, Onan 16HP gas (PA) |
| 339 |
$1,500.00 |
1999
LINCOLN Ranger 8 Portable Welder, s/n U1990829035, Onan 16HP gas (PA) |
| 340 |
$850.00 |
2000
LINCOLN Ranger 8 Portable Welder, s/n U1000307050, Kohler LP gas (PA) |
| 341 |
$750.00 |
1994
MILLER Bobcat 225G Portable Welder, s/n KE720130, Onan 16HP gas (PA) |
| 342 |
$425.00 |
TAHOE
TPI7000LXH Portable Welder/Generator (PA) |
| 343 |
$1,800.00 |
(2)
MILLER Millermatic 212 Portable Welders (PA) |
| 344 |
$475.00 |
(1)
MILLER and (1) LINCOLN Mig Welders (PA) |
| 345 |
$120.00 |
(1)
AIRCO and (1) MILLER Electric Welders (PA) |
| 346 |
$2,300.00 |
(3)
Plasma Cutters (PA) |
| 347 |
$700.00 |
(1)
LINCOLN and (1) MILLER Electric Welders (PA) |
| 348 |
$2,300.00 |
(3)
MILLER Electric Welders (PA) |
| 349 |
$23.00 |
(3)
LINCOLN 250 Amp Electric Welders (PA) |
| 350 |
$45.00 |
(4)
LINCOLN 250 Amp Electric Welders (PA) |
| 350A |
$550.00 |
Metal
Welding Table, with accessories, cart, punches, and welding screen (PA) |
| 351 |
$110.00 |
(4)
MINIFORCE II HEPA Filtration Systems (PA) |
| 352 |
$475.00 |
(2)
AIRREX ADH-100 Portable Dehumidifiers (PA) |
| 353 |
$600.00 |
(2)
AIRREX ADH-100 Portable Dehumidifiers (PA) |
| 354 |
$240.00 |
Refrigerant
Recovery Units and Testers (PA) |
| 355 |
$95.00 |
ROCKWELL
15-017 Drill Press (PA) |
| 356 |
$300.00 |
MTD
8/26 Snow Blower (PA) |
| 357 |
$120.00 |
EX-CELL
3200 PSI Portable Pressure Washer (PA) |
| 358 |
$65.00 |
3"
Centrifugal Pump (PA) |
| 359 |
$350.00 |
MK
9000 Walk Behind Concrete Saw, Honda 13HP gas (PA) |
| 360 |
$3,800.00 |
HILTI
DD250 Core Drill, with vacuum pump, core bits, accessories, and RIDGID
Portable Gang Box (PA) |
| 361 |
$1,200.00 |
HILTI
DD250E Core Drill, with stand (PA) |
| 362 |
$400.00 |
MILWAUKEE
Core Drill, with stand (PA) |
| 363 |
$375.00 |
MILWAUKEE
Core Drill, with stand (PA) |
| 364 |
$1,500.00 |
(8)
UNUSED Core Bits (PA) |
| 365 |
$1,000.00 |
(Approximately
30) Core Drill Bits (PA) |
| 366 |
$950.00 |
HILTI
TE3000-AVR Electric Paving Breaker, with cart (PA) |
| 367 |
$700.00 |
HILTI
TE60-A36 Cordless Rotary Hammer (PA) |
| 368 |
$230.00 |
HILTI
TE70 Electric Rotary Hammer (PA) |
| 369 |
$400.00 |
HILTI
DSH900-X Demo Saw (PA) |
| 370 |
$180.00 |
HILTI
Demo Saw (PA) |
| 371 |
$160.00 |
(2)
MAKITA Electric Demo Saws (PA) |
| 372 |
$375.00 |
RIDGID
CT400 Pro Press Tool, with dies (PA) |
| 373 |
$350.00 |
RIDGID
CT400 Pro Press Tool, with dies (PA) |
| 374 |
$60.00 |
RIDGID
Pro Press Crimp Ring Kit (PA) |
| 375 |
$2,000.00 |
MILWAUKEE
Cordless Press Tool, with dies (PA) |
| 376 |
$600.00 |
MILWAUKEE
Press Tool Dies (PA) |
| 377 |
$650.00 |
MILWAUKEE
Press Tool Rings (PA) |
| 378 |
$150.00 |
RIDGID
Press Tool Rings (PA) |
| 379 |
$210.00 |
RIDGID
Press Tool Rings (PA) |
| 380 |
$120.00 |
(2)
RIDGID Press Snaps (PA) |
| 381 |
$170.00 |
NIMBCO
Cordless Press Tool and Dies (PA) |
| 382 |
$65.00 |
BLUCHER
Manual Pipe cutters (PA) |
| 383 |
$1,500.00 |
RIDGID
SF-2500 Pipe Freezing Unit (PA) |
| 384 |
$425.00 |
T-DRILL
T-55G Pipe Forming Drill, with bits (PA) |
| 385 |
$475.00 |
MILWAUKEE
Magnetic Broach (PA) |
| 386 |
$850.00 |
MILWAUKEE
Magnetic Drill (PA) |
| 387 |
$21.00 |
MILWAUKEE
Thunderbolt Hammer Drill (PA) |
| 388 |
$200.00 |
(2)
HILTI Hammer Drills (PA) |
| 389 |
$21.00 |
(4)
HILTI Hammer Drills (PA) |
| 390 |
$25.00 |
(4)
MILWAUKEE Hammer Drills (PA) |
| 391 |
$6.00 |
(3)
Hammer Drills (PA) |
| 392 |
$325.00 |
(3)
MILWAUKEE and (1) DEWALT Porta Band Saws (PA) |
| 393 |
$22.00 |
(2)
DEWALT 1/2" Electric Impact Wrenches (PA) |
| 394 |
$275.00 |
(5)
Electric Angle Grinders (PA) |
| 395 |
$22.00 |
(5)
Electric Angle Grinders (PA) |
| 396 |
$24.00 |
(3)
MILWAUKEE and (1) DEWALT Reciprocating Saws (PA) |
| 397 |
$16.00 |
(2)
MILWAUKEE and (1) PORTER CABLE Reciprocating Saws (PA) |
| 398 |
$35.00 |
(2)
MILWAUKEE Reciprocating Saws (PA) |
| 399 |
$550.00 |
(2)
MILWAUKEE Electric Drills, with pipe clamps (PA) |
| 400 |
$120.00 |
MILWAUKEE
1/2" Super Hawg Angle Drill (PA) |
| 401 |
$60.00 |
RIDGID
K38 Electric Pipe Cleaner (PA) |
| 402 |
$220.00 |
(2)
HILTI GX120 Nailers (PA) |
| 403 |
$30.00 |
Electric
Drills, Shears, and Saws (PA) |
| 404 |
$160.00 |
(1)
MAKITA and (1) MILWAUKEE Cordless Hammer Drills (PA) |
| 405 |
$300.00 |
(2)
MILWAUKEE Cordless Porta Band Saws (PA) |
| 406 |
$250.00 |
(1)
DEWALT and (3) MILWAUKEE Cordless Reciprocating Saws (PA) |
| 407 |
$275.00 |
Cordless
Drills, Screw Shooters, Circular Saws, Batteries, and Chargers (PA) |
| 408 |
$600.00 |
(2)
MILWAUKEE and (1) DEWALT Cordless Rebar Cutters (PA) |
| 409 |
$275.00 |
(2)
MILWAUKEE Cordless Pipe Expansion Tools (PA) |
| 410 |
$750.00 |
Combustion
Analyzer, gas and Refrigerant Detectors (PA) |
| 411 |
$70.00 |
D.E.
STEARNS 14/20 Holiday Pipe Coating Detector (PA) |
| 412 |
$375.00 |
Retractable
Lifelines, Harnesses, and Tripods (PA) |
| 412A |
$350.00 |
(3)
Rolling Tables (PA) |
| 413 |
$180.00 |
GRACO
Magnum X7 Airless Paint Sprayer (PA) |
| 414 |
$275.00 |
GRACO
650PC Pro Airless Paint Sprayer (PA) |
| 414A |
$5.50 |
ARO
Pneumatic Sprayer (PA) |
| 415 |
$1,000.00 |
HILTI
PR30 Rotating Laser, with tripod and grade pole (PA) |
| 416 |
$450.00 |
TOPCON
RL-H5A Rotating Laser, with tripod and grade pole (PA) |
| 417 |
$325.00 |
(3)
Rotating Lasers, with tripods and grade poles (PA) |
| 418 |
$300.00 |
Pallet
Racking, with supplies (BUYER MUST LOAD) (PA) |
| 419 |
$300.00 |
Sheet
Metal, with rack, cart, and (2) shelves with hardware and collars (PA) |
| 420 |
$80.00 |
Table,
with chop saw and sheet metal stock behind table and on other side of loading
dock (BUYER MUST LOAD) (PA) |
| 421 |
$1,800.00 |
SUMNER
2118 Material Lift (PA) |
| 422 |
$1,000.00 |
SUMNER
2124 Material Lift (PA) |
| 423 |
$1,700.00 |
SUMNER
2118 Material Lift (PA) |
| 424 |
$1,900.00 |
SUMNER
2118 Material Lift (PA) |
| 425 |
$1,600.00 |
SUMNER
2118 Material Lift (PA) |
| 426 |
$1,600.00 |
SUMNER
2118 Material Lift (PA) |
| 427 |
$2,100.00 |
SUMNER
2118 Material Lift (PA) |
| 428 |
$600.00 |
GENIE
SLC-18 Material Lift (PA) |
| 429 |
$550.00 |
GENIE
SLC-24 Material Lift (PA) |
| 430 |
$300.00 |
GENIE
SLC-24 Material Lift (PA) |
| 431 |
$140.00 |
GENIE
SLC-24 Material Lift (PA) |
| 432 |
$160.00 |
GENIE
SLC-24 Material Lift (PA) |
| 433 |
$130.00 |
GENIE
SLC-24 Material Lift (PA) |
| 434 |
$550.00 |
GENIE
SLC-18 Material Lift (PA) |
| 435 |
$60.00 |
GENIE
SL-18 Material Lift (PA) |
| 436 |
$30.00 |
GENIE
SL-18 Material Lift (PA) |
| 437 |
$275.00 |
(2)
SUMNER Roust-A-Bout Material Lifts (PA) |
| 438 |
$1,100.00 |
JLG
AM-24 Portable Aerial Lift, 12 volt (PA) |
| 439 |
$45.00 |
VERMETTE
Material Lift (PA) |
| 440 |
$850.00 |
FROST
FIGHTER IDF500LP/NG, 420,000BTU Portable Heater, with gas line and hose (PA) |
| 441 |
$950.00 |
FROST
FIGHTER IDF500LP/NG, 420,000BTU Portable Heater, with gas line and hose (PA) |
| 442 |
$1,000.00 |
FROST
FIGHTER IDF500LP/NG, 420,000BTU Portable Heater, with gas line and hose (PA) |
| 443 |
$110.00 |
DEF
Electric Pump, with cart (PA) |
| 443A |
$120.00 |
(9)
Freon Reclaim Cylinders (PA) |
| 443B |
$120.00 |
(9)
Freon Reclaim Cylinders (PA) |
| 443C |
$60.00 |
(5)
Freon Cylinders and (8) Freon Reclaim Cylinders (PA) |
| 443D |
$240.00 |
(5)
Freon Reclaim Cylinders, (2) Freon Cylinders, and Bottle Rack (PA) |
| 444 |
$160.00 |
(2)
Man/Material Baskets (Forklifts) (PA) |
| 445 |
$240.00 |
(2
Sets) 72" Fork Extensions and (1) Forklift Ball Hitch Attachment (PA) |
| 446 |
$700.00 |
Forklift
5th Wheel Attachment (PA) |
| 447 |
$55.00 |
(5)
Propane Bottle Racks (PA) |
| 448 |
$450.00 |
Steel
Rack and Contents (PA) |
| 449 |
$1,900.00 |
KNAACK
Data Vault Portable Field Station (PA) |
| 450 |
$1,100.00 |
KNAACK
Data Vault Portable Field Station (PA) |
| 451 |
$1,100.00 |
KNAACK
Data Vault Portable Field Station (PA) |
| 452 |
$1,600.00 |
KNAACK
Data Vault Portable Field Station (PA) |
| 453 |
$1,700.00 |
KNAACK
Data Vault Portable Field Station (PA) |
| 454 |
$1,500.00 |
KNAACK
Data Vault Portable Field Station (PA) |
| 455 |
$325.00 |
Portable
Material Rack (PA) |
| 456 |
$75.00 |
(2)
MACRACK I Portable Carts (PA) |
| 457 |
$190.00 |
(3)
Portable Job Boxes (PA) |
| 458 |
$700.00 |
KNAACK
4830 Portable Gang Box (PA) |
| 459 |
$1,300.00 |
KNAACK
109 Portable Cabinet (PA) |
| 460 |
$1,600.00 |
KNAACK
109 Portable Cabinet (PA) |
| 461 |
$1,400.00 |
(2)
KNAACK 89 Portable Chests (PA) |
| 462 |
$950.00 |
(2)
KNAACK 4830 Portable Gang Boxes and (1) KNAACK Portable Chest (PA) |
| 463 |
$1,000.00 |
KNAACK
109 Portable Cabinet (PA) |
| 463A |
$1,500.00 |
(2)
KNAACK 89 Portable Chests (PA) |
| 464 |
$1,100.00 |
(2)
KNAACK 89 Portable Chests (PA) |
| 465 |
$900.00 |
(2)
CRESCENT Portable Gang Boxes (PA) |
| 466 |
$140.00 |
(2)
Portable Gang Boxes (PA) |
| 467 |
$850.00 |
KNAACK
119 Portable Cabinet (PA) |
| 468 |
$1,200.00 |
KNAACK
139 Portable Cabinet (PA) |
| 469 |
$750.00 |
(2)
KNAACK Portable Gang Boxes (PA) |
| 470 |
$650.00 |
(2)
KNAACK 4830 Portable Gang Boxes (PA) |
| 471 |
$850.00 |
(3)
KNAACK Portable Gang Boxes (PA) |
| 472 |
$425.00 |
RIDGID
60R-OS Portable Gang Box (PA) |
| 473 |
$1,200.00 |
CLEAN
WORK BOOTH Portable HEPA Booth (PA) |
| 474 |
$210.00 |
JOHNSON
CONTROLS ZYG06E2CE2C1ZB1C123A3, Forced Air Furnace, with cooling unit (PA) |
| 475 |
$85.00 |
Heat
Pump and Heat Recovery Units (PA) |
| 476 |
$8.00 |
(7
Pallets) Pipe Fittings and HVAC Supplies (PA) |
| 477 |
$2,200.00 |
(2)
Storage Trailers, with contents (No Title) (PA) |
| 478 |
$3,600.00 |
Single
Axle Storage Trailer, with fiberglass step ladders, aluminum pick boards, and
copper and steel pipe. (No Title - Storage Only) (PA) |
| 479 |
$650.00 |
18'
Tandem Axle Tag-A-Long Coil Pipe Trailer, VIN# unknown, equipped with 16'
level deck with 8' mesh side walls, 2' beavertail with ramps, 76" width,
spoke wheels, and 7-14.5 tires. In fair condition with fair to good tires.
(No Title) (PA) |
| 480 |
$275.00 |
(8)
Storage and Gang Boxes (PA) |
| 481 |
$300.00 |
(7)
Storage and Gang Boxes (PA) |
| 482 |
$1,900.00 |
Contents
of Out Building to Include: Victaulic and PVC Pipe Fittings; Fernco
Couplings; Pipe Plugs; and Gate Valves (BUYER MUST LOAD) (PA) |
| 483 |
$180.00 |
(2)
Portable Racks (PA) |
| 484 |
$60.00 |
(3)
PIPEMAC Portable Carts (PA) |
| 485 |
$400.00 |
(3)
PIPEMAC I Portable Racks (PA) |
| 486 |
$800.00 |
(5)
PIPEMAC I Portable Racks (PA) |
| 487 |
$35.00 |
(2)
Pipe Carts (PA) |
| 488 |
$40.00 |
(2)
Pipe Carts (PA) |
| 489 |
$250.00 |
(2)
Pipe Carts (PA) |
| 490 |
$17.00 |
(3)
Hand Trucks (PA) |
| 491 |
$100.00 |
(5)
Bottle Carts (PA) |
| 492 |
$550.00 |
(16)
Shop Carts (PA) |
| 493 |
$23.00 |
(5)
Shop Tables and (7) Carts (PA) |
| 494 |
$300.00 |
(12)
Carts (PA) |
| 495 |
$450.00 |
(10)
Carts (PA) |
| 496 |
$425.00 |
(11)
Carts (PA) |
| 497 |
$325.00 |
(13)
Carts (PA) |
| 498 |
$210.00 |
(11)
Carts (PA) |
| 499 |
$0.00 |
Insulated
Duct Work, Insulated Flex Duct, and Assorted Materials (PA) |
| 500 |
$325.00 |
KALAMAZOO
Portable Metal Cutting Band Saw, 120 volt single phase (PA) |
| 501 |
$13.00 |
LOCKFORMER
20 Gauge Roll Former, s/n 4192 (Condition Unknown) (PA) |
| 502 |
$3.25 |
Roll
Former (Condition Unknown) (PA) |
| 503 |
$2,600.00 |
ORIFLOW
Portable Air Leak Detector (PA) |
| 504 |
$1,100.00 |
ORIFLOW
Portable Air Leak Detector (PA) |
| 505 |
$30.00 |
(2)
Electric Air Compressors (Not Running) (PA) |
| 506 |
$24.00 |
(2)
RIDGID Electric Air Compressors (PA) |
| 507 |
$85.00 |
HUSKY
Portable Electric Air Compressor (PA) |
| 508 |
$21.00 |
ABATEMENT
Portable Air Compressor, 220 volt electric (Condition Unknown) (PA) |
| 509 |
$1.00 |
(2)
Horizontal Shop Air Compressors (Condition Unknown) (PA) |
| 510 |
$275.00 |
TAHOE
Portable Air Compressor, gas (PA) |
| 511 |
$130.00 |
(2)
Steel Johnson Bars (PA) |
| 512 |
$150.00 |
(2)
Steel Johnson Bars (PA) |
| 513 |
$160.00 |
(2)
Johnson Bars (PA) |
| 514 |
$120.00 |
Aluminum
Cargo Holders (PA) |
| 515 |
$375.00 |
HUSKY
Portable Tool Chest (PA) |
| 516 |
$240.00 |
HUSKY
Portable Tool Chest (PA) |
| 517 |
$275.00 |
Combination
Wrenches, Torque Wrench, Impact Sockets, and Air Tools (PA) |
| 518 |
$210.00 |
Combination
Wrenches, Laser Levels, and Assorted Tools (PA) |
| 519 |
$110.00 |
JET
3-Ton Electric Chain Hoist, Manual Chain Hoists, and Ratchet Binders (PA) |
| 520 |
$70.00 |
PITTSBURGH
Portable Engine Hoist (PA) |
| 521 |
$200.00 |
(6)
Torch Carts and (1) Pipe Cart (PA) |
| 522 |
$170.00 |
Pallet
Rack and Contents (BUYER MUST LOAD) (PA) |
| 523 |
$1,500.00 |
Welding
Cable and Welding Accessories (Pallet and Rolling Box) (PA) |
| 524 |
$150.00 |
HONEYWELL
Horizontal Shop Air Compressor (Condition Unknown) (PA) |
| 525 |
$140.00 |
JOHNSON
Horizontal Shop Air Compressor (Condition Unknown) (PA) |
| 526 |
$220.00 |
ONAN
Diesel Generator, 3-phase (Condition Unknown) (PA) |
| 527 |
$90.00 |
HILTI
Demo Saw (Not Running) (PA) |
| 528 |
$110.00 |
KOBALT
Mitre Saw (PA) |
| 529 |
$110.00 |
(3)
MILWAUKEE Chop Saws (PA) |
| 530 |
$55.00 |
(2)
RIDGID Chop Saws (PA) |
| 531 |
$30.00 |
(4)
Chop Saws (PA) |
| 532 |
$160.00 |
Rolling
Shop Table, and contents (PA) |
| 533 |
$325.00 |
PITTSBURGH
Portable Shop Gantry (PA) |
| 533A |
$375.00 |
PITTSBURGH
1-Ton Rolling Gantry (PA) |
| 534 |
$60.00 |
Steel
Shop Table, Rack, Shelving Unit, and Manual Cutter (BUYER MUST LOAD - Except
Table) (PA) |
| 535 |
$550.00 |
Angle
and Conduit (BUYER MUST LOAD) (PA) |
| 536 |
$110.00 |
All
Thread and Assorted Product (On Loading Ramp and Walls) (BUYER MUST LOAD)
(PA) |
| 537 |
$0.50 |
Spiral
Duct Work and Rack (BUYER MUST LOAD) (PA) |
| 538 |
$750.00 |
Extension
Cords and Large Quantity of Tools (Contents of Hallway) (BUYER MUST LOAD)
(PA) |
| 539 |
$2,000.00 |
(20+/-
Sections) Rolling Scaffolding, Regular Scaffolding, with cross braces, and
(6) Aluminum Pick Boards (3rd Floor) (BUYER MUST LOAD) (PA) |
| 540 |
$240.00 |
Steel
Rack, with welding cable and Water and Air Hose (3rd Floor) (BUYER MUST LOAD)
(PA) |
| 541 |
$130.00 |
(18)
Safety Stands and Flashing Lights (3rd Floor) (BUYER MUST LOAD) (PA) |
| 542 |
$350.00 |
Oxygen/Acetylene
Torch Sets and Carts (3rd Floor) (BUYER MUST LOAD) (PA) |
| 543 |
$550.00 |
Manual
Chain Hoists and Come-A-Longs (3rd Floor) (BUYER MUST LOAD) (PA) |
| 544 |
$475.00 |
Electric
Mortar Mixer and (4) Wheelbarrows (3rd Floor) (BUYER MUST LOAD) (PA) |
| 545 |
$800.00 |
Retractable
Lifelines and Harnesses (3rd Floor - On Floor and Back Wall) (BUYER MUST
LOAD) (PA) |
| 546 |
$375.00 |
Slings,
Shackles, and Assorted Rigging (3rd Floor) (BUYER MUST LOAD) (PA) |
| 547 |
$650.00 |
(37)
Pipe Stands (3rd Floor) (BUYER MUST LOAD) (PA) |
| 548 |
$170.00 |
Rack
and Contents (3rd Floor) (BUYER MUST LOAD) (PA) |
| 549 |
$230.00 |
(11)
Welding Screens (3rd Floor) (BUYER MUST LOAD) (PA) |
| 550 |
$110.00 |
Shop
Vacs, Saw Horses, Snow Blower, and Work Light (3rd Floor) (BUYER MUST LOAD)
(PA) |
| 551 |
$2.50 |
(2)
Lifting Carts (3rd Floor) (BUYER MUST LOAD) (PA) |
| 552 |
$850.00 |
(2)
AC SMITH DSE-50A 200 Water Heaters (3rd Floor) (BUYER MUST LOAD) (PA) |
| 553 |
$70.00 |
(2)
Rolling Cages (3rd Floor) (BUYER MUST LOAD) (PA) |
| 554 |
$325.00 |
(8)
AC/Heating Units (3rd Floor) (BUYER MUST LOAD) (PA) |
| 555 |
$110.00 |
(17)
Assorted Tires (3rd Floor) (BUYER MUST LOAD) (PA) |
| 556 |
$10.00 |
Large
Quantity of HVAC Construction Materials and Parts (Contents Along Wall - With
The Exception of Lots 551-555) (3rd Floor) (BUYER MUST LOAD) (Please Note:
Loadout must wait until Wednesday October 4th thru October 11th. Buyers may
prepare for shipping beforehand, but use of elevator and loadout must wait
until Wednesday Oct. 4th) (PA) |
| 557 |
$350.00 |
Large
Quantity of Air Condensing Units, Hoods, and HVAC Construction Materials and
Parts (3rd Floor) (BUYER MUST LOAD) (Please Note: Loadout must wait until
Wednesday October 4th thru October 11th. Buyers may prepare for shipping
beforehand, but use of elevator and loadout must wait until Wednesday Oct.
4th) (PA) |
| 558 |
$240.00 |
Large
Quantity of Duct Work, Louvers, Vents, Materials, Parts, and Shelving (3rd
Floor) (BUYER MUST LOAD) (Please Note: Loadout must wait until Wednesday
October 4th thru October 11th. Buyers may prepare for shipping beforehand,
but use of elevator and loadout must wait until Wednesday Oct. 4th) (PA) |
| 559 |
$1.00 |
ENGEL
Control Panel (3rd Floor) (BUYER MUST LOAD) (PA) |
| 560 |
$55.00 |
(2)
HYPERTHERM Plasma Cutters and MILLER Spot Welder (3rd Floor) (BUYER MUST
LOAD) (PA) |
| 561 |
$120.00 |
Large
Quantity of Louvers, Vents, Duct Work, Valves, and HVAC Construction
Materials and Parts (3rd Floor) (BUYER MUST LOAD) (Please Note: Loadout must
wait until Wednesday October 4th thru October 11th. Buyers may prepare for
shipping beforehand, but use of elevator and loadout must wait until
Wednesday Oct. 4th) (PA) |
| 562 |
$2,600.00 |
Large
Quantity of Sheet Metal Hardware, Adhesives, Materials, and Racks (2nd Floor)
(BUYER MUST LOAD) (Please Note: Loadout must wait until Wednesday October 4th
thru October 11th. Buyers may prepare for shipping beforehand, but use of
elevator and loadout must wait until Wednesday Oct. 4th) (PA) |
| 563 |
$55.00 |
Large
Quantity Insulated Duct Work, Hood, and Assorted Materials (2nd Floor) (BUYER
MUST LOAD) (Please Note: Loadout must wait until Wednesday October 4th thru
October 11th. Buyers may prepare for shipping beforehand, but use of elevator
and loadout must wait until Wednesday Oct. 4th) (PA) |
| 564 |
$475.00 |
Large
Quantity of Duct Work (2nd Floor) (BUYER MUST LOAD) (PA) |
| 565 |
$75.00 |
Tripods,
Grade Poles, and Assorted Survey Equipment (2nd Floor) (Contents of Closet)
(BUYER MUST LOAD) (PA) |
| 566 |
$1,200.00 |
Tool
Sets, Compressors, Bits, Core Stands, Assorted Parts, and Racks (Basement)
(Contents of Tool Room) (BUYER MUST LOAD) (PA) |
| 567 |
$500.00 |
Tools,
Parts, Testing Equipment, Assorted Materials, and Racks (Basement) (Contents
of Back Room) (BUYER MUST LOAD) (PA) |
| 568 |
$5,750.00 |
Copper,
Copper Fittings, Assorted Materials, Rack, and Shelf (Basement) (BUYER MUST
LOAD) (PA) |
| 569 |
$2,100.00 |
VICTAULIC Fittings,
Hardware, Fittings, and Parts (Basement) (BUYER MUST LOAD) (PA) |
| 570 |
$1,000.00 |
Rolling
Forklift Dump Hopper (PA) |
