|
To search Listing, use Control F (PC), Command F (MAC)
| October 18, 2023 – 9:00AM |
Peterscape Land Clearing and Recycling, Inc.
Old Bridge, New Jersey
|
Absolute Auction |
|
Notice: Following (40) successful years in the land clearing, waste wood recycling and mulch production industries, the owner of Peterscape Land Clearing and Recycling, Inc., Mr. Wes Peterson, has decided it is time to retire in order to pursue other life interests. All equipment is owned by Peterscape and will positively sell to the highest bidder without minimums or reserves. |
|
Location: The auction will be held at the Peterscape mulch yard/recycle facility located at 72 Pleasant Valley Road, Old Bridge, New Jersey 08857 (Please Note: There will be NO LIVE BIDDING onsite) |
|
LIVE, VIRTUAL AUCTION: This auction is being conducted via LIVE, VIRTUAL ONLINE ONLY. There will be NO LIVE BIDDING FROM THE SITE. ADDITIONALLY, there will be NO PAYMENTS accepted at the auction site! Payment must be paid either by wire transfer or credit card. |
|
Online Bidding: Live internet bidding will be provided by Proxibid. Proxibid will charge an Internet Service Provider Fee of 5% to the successful internet bidder for items over $10,000 and 10% for items $10,000 and under, for each lot purchased on-line. All bidders are required to register to bid through Proxibid. |
|
Terms: Complete payment immediately after receipt of invoice by wire transfer or credit card only. Credit card payments will be charged a 3% processing fee. |
|
Sales Tax: Pursuant to Publication ANJ–3, the State of New Jersey considers this an isolated/casual sale and therefore no sales tax will be charged. |
|
Removal: After complete payment items can be removed sale day until 4:00pm. Items may also be removed Thursday and Friday, October 19th and 20th and Monday thru Wednesday, October 23rd thru the 25th from 8:00AM to 4:00PM. All items must be removed by Wednesday, October 25, 2023 at 4:00PM |
| PA Auction License No: AY000281 |
| 1 |
$250.00 |
JOHN DEERE LA105 Lawn Tractor, Briggs &
Stratton 19.5HP gas, 5 speed transmission, with 42" mower deck (140
Hours) |
| 2 |
$20.00 |
JOHN DEERE Model 8Y Dump Cart, with poly tub |
| 3 |
$20.00 |
JOHN DEERE Broadcast Spreader, with poly tub,
(10) settings |
| 4 |
$550.00 |
STIHL O84AV, 28" Chain Saw |
| 5 |
$325.00 |
STIHL MS461, 24" Chain Saw |
| 6 |
$260.00 |
STIHL ST1-038, 20" Chain Saw |
| 6A |
$325.00 |
HUSQVARNA 210XP, 30" Chain Saw |
| 7 |
$140.00 |
MALL Vintage 2-Man Chain Saw, 60" bar
(Not Running) |
| 8 |
$0.00 |
Hydraulic Pole Saw and Limb Lopper, with box |
| 9 |
$10.00 |
Hydraulic Pole Saw (no bar) and (3) Hydraulic
Limb Loppers |
| 10 |
$25.00 |
(2) Hydraulic Chain Saws and KNAACK Weather
Guard Tool Box |
| 11 |
$100.00 |
ECHO EDR-2400 Gas Powered Drill |
| 12 |
$10.00 |
LITTLE WONDER Gas Powered Sickle Bar Trimmer |
| 13 |
$400.00 |
HONDA WT30X, 3" Trash Pump, with suction
and discharge hose and strainers |
| 14 |
$115.00 |
PREDATOR 3" Trash Pump, with suction and
discharge hose |
| 15 |
$100.00 |
PACIFIC 3" Trash Pump |
| 15A |
$25.00 |
SUBARU 2" Trash Pump, with suction hose
(Frame Damaged) |
| 16 |
$225.00 |
NORTH AMERICAN Diesel Powered Welding
Station, 7500 watt/200 amp generator, electric start (No Leads) |
| 17 |
$135.00 |
STIHL BR340 Backpack Blower |
| 18 |
$100.00 |
STIHL SG17 Sprayer/Blower |
| 19 |
$95.00 |
STIHL Gas Powered Hedge Trimmer |
| 20 |
$1.00 |
(5) TORPEDO Space Heaters (2 Not Running) |
| 21 |
$2,000.00 |
GATES Mobile Crimp Hydraulic Hose Crimping
Station, with chop saw, collets, hose, and fittings |
| 22 |
$16,000.00 |
1998 CATERPILLAR Model D4C XL Crawler
Tractor, s/n 6YL02137, powered by Cat 3046 diesel engine and powershift transmission,
equipped with 6-way straight blade, tow pin, ROPS canopy, and 18" SBG
pads. In good condition with good undercarriage. (Meter Reads 5,689 Hours)
(Undercarriage Replaced August 2012 @ 4,015 Hours) |
| 23 |
$10,750.00 |
1999 CATERPILLAR Model 525 Grapple Skidder,
s/n 1DN01725, powered by Cat 3304 diesel engine and powershift transmission,
equipped with single arch grapple boom, Esco rotating grapple, hydraulic
winch, 8' stacking blade, enclosed ROPS cab with sweeps, side screens, air
conditioning, and 39.5-32 tires. In fair to good condition with fair tires.
(Meter Reads 10,479 Hours) |
| 24 |
$5,250.00 |
1998 CATERPILLAR Model 525 Grapple Skidder,
s/n 1DN01542, equipped with dual arch grapple boom, hydraulic rear winch, 9'
stacking blade, cab with sweeps, and 24.25-32 logging tires. (Parts Only)
(Cab Glass Missing) |
| 25 |
$11,250.00 |
1988 JOHN DEERE Model 644E Rubber Tired
Loader, s/n 519944, powered by JD diesel engine and powershift transmission,
equipped with general purpose loader bucket, enclosed ROPS cab, and 23.5R25
tires. In fair condition with poor tires. (Meter Reads 15,567) |
| 26 |
$5,000.00 |
2000 DAEWOO Model MEGA 200TC-III Rubber Tired
Loader, s/n 1012, powered by Daewoo diesel engine and powershift
transmission, equipped with ACS hydraulic coupler, general purpose loader
bucket, enclosed ROPS cab, and 20.5R25 tires. In good condition with very
good tires. (Meter Reads 5,630 Hours) (Needs Rear Axle Repaired) (Broken Gear
in Differential - Axles Removed - Rear Axle Free Wheeling) |
| 27 |
$5,000.00 |
1975 CATERPILLAR Model 980B Rubber Tired
Loader, s/n 89P04725, powered by Cat diesel engine and powershift
transmission, equipped with general purpose loader bucket with bolt-on
cutting edge, enclosed ROPS cab, and 29.5-25 L-4 tires. In fair to good condition
with very good tires. (Meter Reads 1,984 Hours) (Leak in Hydraulic Oil
Cooler) |
| 28 |
$17,500.00 |
2004 JOHN DEERE Model 200CLC Hydraulic
Excavator, s/n 504517, powered by JD diesel engine and hydraulic drive,
equipped with 9'6" dipper stick with thumb bracket, Geith 42"
digging bucket, operators cab with air conditioning, and 32.5" TBG pads.
In fair to good condition with fair undercarriage. (Meter Reads 10,857 Hours) |
| 29 |
$14,500.00 |
DOOSAN Model DX225LC Hydraulic Excavator, s/n
70005038, powered by Doosan diesel engine, equipped with 9'6" dipper
stick, Geith 42" digging bucket, thumb bracket, pattern changer,
operators cab, and 31.5" TBG pads. In fair to good condition with fair
to good undercarriage. (Dipper Stick Fishplated)
(Purchased in 2013 as a 2009 Year Model) (Meter Reading N/A) |
| 30 |
$8,500.00 |
1984 CATERPILLAR Model 215 Hydraulic
Excavator, s/n 95Z00640, powered by Cat 3304 diesel engine, equipped with
9'2" dipper stick with thumb bracket, 40" digging bucket, operators
cab with forestry screens, and 30" TBG pads. (Hour Meter Removed) (Berco
Undercarriage Replaced by Durable Undercarriage) (Grapple Sold Separately) |
| 31 |
$44,500.00 |
1995 CATERPILLAR Model D250E, 25 Ton, 6x6 End
Dump, s/n 5TN00277, powered by Cat diesel engine and powershift transmission,
equipped with bed liners and 23.5R25 tires. In fair to good condition with
fair to good tires. (Meter Reads 11,818 Hours) (Rebuilt Transmission, Torque
Converter, Oil Cooler, and Oil Pump at Foley - July 2006 @ Approximately
10,500 Hours - Work Documented Without Meter Reading) |
| 32 |
$6,000.00 |
PALLARI KH-160 Hydraulic Stump Shear (Rebuilt
Knife and Dual Cylinders) (300 Series Excavator and Up) |
| 33 |
$5,750.00 |
RANSOME Mechanical Stump Shear (Doosan DX225) |
| 34 |
$3,750.00 |
ACS 48" Hydraulic Dual Action Root
Grapple, with ACS coupler (Doosan 225) |
| 35 |
$2,750.00 |
WAGWAY 50", 5-Tine Grapple (Missing Pins
and Bushings) (Cat 330) |
| 36 |
$3,250.00 |
ALLIED 48", 5-Tine Grapple, with stiff
arm (Doosan DX225) |
| 37 |
$1,000.00 |
36", 5-Tine Grapple, with stiff arm
(Removed From Cat 215) |
| 38 |
$1,000.00 |
36", 5-Tine Grapple (Cat 225) |
| 39 |
$3,250.00 |
GEITH 44", 5-Tine Grapple (Broken Ear) |
| 40 |
$600.00 |
36" Digging Bucket (Komatsu PC220) |
| 41 |
$600.00 |
46" Digging Bucket (Komatsu PC220) |
| 42 |
$200.00 |
29" Mechanical Thumb, with stiff arm |
| 43 |
$50.00 |
Mechanical Thumb (Broken Welds) |
| 44 |
$1,000.00 |
ROCKLAND 10 Cubic Yard Light Material Bucket
(Cat 980C) |
| 45 |
$50.00 |
HYDRO AX Felling Head (Parts) |
| 46 |
$30.00 |
9'6" Dipper Stick, with thumb bracket
and boom with cylinders (Stick Cylinder Bent) (Late 90's Daewoo Solar 220 Excavator) |
| 47 |
$10.00 |
FOPS Forestry Cage, for operators cab
(Komatsu PC300-3) |
| 48 |
$32,000.00 |
POWERSCREEN Model 620, 6' x 20' Portable
Trommel Screen, s/n unknown, powered by Deutz water cooled diesel engine,
equipped with 36" hydraulic folding rear discharge conveyor, 33"
side folding discharge conveyor, 16" x 50' stacking conveyor (converted
to hydraulic), mounted on tandem axle carrier with (2) hydraulic stabilizers
and 425/65R22.5 tires. In good condition. (Meter Reads 07,356 Hours) (Engine
Rebuilt in 2012) (Approximately 1,000 Hours on Engine Rebuild) (No ID Plate) |
| 49 |
$135,000.00 |
2002 MORBARK Model 7600 Wood Hog Portable
Horizontal Grinder, s/n 185-1041, powered by Cat 3412E, 1,000HP diesel
engine, equipped with 5-chain feed conveyor, 54" width drum, 44"
hydraulic folding discharge conveyor, wireless remote, mounted on quad axle
carrier with air ride suspension and (2) hydraulic stabilizers, and
255/70R22.5 tires. In good condition with good tires. (Meter Reads 10,482
Hours) (Mill Replaced Approximately 2,000 Hours Ago; (4) Hydraulic Cylinders
Repacked and (2) New Cylinders; (5) New Feed chains with 500 Hours; New
Conveyor Motor) |
| 50 |
$51,000.00 |
2000 MORBARK Model 1500 Portable Tub Grinder,
s/n 575-049, powered by Cat 3508DITA, 1,000HP diesel engine, equipped with
39.5" rear discharge conveyor, wireless remote, diesel powered
preheater, removable safety roof, mounted on tri-axle carrier with (2)
hydraulic stabilizers, spring suspension, and 255/70R22.5 tires. In good
condition. (Meter Reads 8,090 Hours) (Rebuilt Engine With New OEM Crank
Shaft, Pistons, Rods, and Heads, New Clutch, Rebuilt Gear Box and New Drive
Shaft - Less Than 1,000 Hours) (Work Performed by Timber Ridge Equipment Co.)
(Additional 1 Set UNUSED Hammers and (4) Rods) (Air Compressor - Missing
Engine) (Overall Width 11'10") |
| 51 |
$39,500.00 |
1998 VERMEER Model TG400A/AL, 10' Portable
Tub Grinder, s/n 1VRN462T6W1000477, powered by Cat 3406, 400HP diesel engine,
equipped with log loader with rotating grapple and operators cab, 30"
rear folding discharge conveyor, mounted on tri-axle trailer with (2)
hydraulic outriggers and 215/75R17.5 tires. In good condition. (Meter Reads
05,946 Original Hours On Machine and 04,945 Hours On Cab Meter) (Engine
Rebuild 2017 - Less Than 200 Hours) (Purchased New March 2003) |
| 52 |
$35,000.00 |
1996 MORBARK Model 30 Total Chiparvester
Portable Whole Tree Chipper, s/n 1962, powered by Cat 3412, 800HP diesel
engine, equipped with Morlift 1000 log loading boom, Rotobec 360 degree
rotating grapple, joystick controls, folding operator cab, 4-knife chipper
drum, and Espar engine preheater, mounted on tandem axle carrier with (4)
hydraulic outriggers, spring suspension, and 295/75R22.5 tires. (Not Running
- Engine Seized) |
| 53 |
$12,500.00 |
1998 PRENTICE Model 410E Knuckleboom Log
Loader, s/n 54337, powered by Cummins 6BTA diesel engine, equipped with
Prentice C848W rotating grapple, mounted on Evans D-30 tandem axle carrier
with (4) hydraulic outriggers and 11R22.5 tires. In good condition with good
tires. (Meter Reads 00,360 Hours - Meter Changed at 9,266 Hours) (No ID Plate
- Year and s/n From Records) |
| 54 |
$2,000.00 |
36" x 50' Portable Stacking Conveyor,
with 20HP electric motor (Head Pully Mounting Bracket Broken) |
| 54A |
$1,500.00 |
STOUFFER Green Machine Mulch Colorizer, cart
mounted |
| 55 |
$450.00 |
VERMEER 400 Tob Grinder Screen Sets: (3)
Complete Sets - (2) 1-1/2" and (1) 1" Playground |
| 56 |
$1,100.00 |
(5) Screen Sets, (11) screen panels (Morbark
1200) |
| 57 |
$2,800.00 |
(5) Screen Sets, (29) screen panels (Morbark
7600) |
| 58 |
$1,100.00 |
(4) Screen Sets Including (1) 1-1/2"
UNUSED Bottom Screen, (15) screen panels (Morbark 1500) |
| 59 |
$150.00 |
(10) Screen Panels (Unknown Grinder) |
| 59A |
$600.00 |
MORBARK 30 Chipper Knives, Babbit Jig, and
Lead |
| 60 |
$1,000.00 |
(13) Hammers and (3) Mill Rods (Morbark 7600) |
| 61 |
$550.00 |
Hammers and Various Parts (Morbark 1300) |
| 62 |
$50.00 |
Various Hammers (Vermeer TG400) |
| 63 |
$425.00 |
Wear Plates (Full Set) and Hammers (Morbark
1200) |
| 64 |
$110.00 |
(4 Pallets) Morbark Parts - Mill Shaft,
Clutch, Feed Roller Chain, Hydraulic Motors and Pumps |
| 65 |
$50,500.00 |
2006 PETERBILT Model 379 Tandem Axle Truck
Tractor, VIN# 1XP5DB0X06N877326, powered by Cat C15, 600HP diesel engine and
Eaton Fuller 18 speed transmission, equipped with 46,000 lb rears, 12,000 lb
front axle, double frame, air ride suspension, wetline, 3-stage engine brake,
air slide 5th wheel, full lock main differential, aluminum wheels, power
windows, cruise control, air conditioning, and 11R24.5 tires. In good
condition with good tires. (Odometer Reads 605,502 Miles) (Meter Reads 22,047
Hours) (New Cylinder Head and (2) Turbos - July 2022) |
| 66 |
$5,000.00 |
1994 AUTOCAR Tandem Axle Truck Tractor, VIN#
4V2SCBCH8RR513273, powered by Cat 3406, 425HP diesel engine and Eaton Fuller
8LL, 10 speed transmission, equipped with double frame, spring/walking beam
suspension, wetline, stationary 5th wheel, air conditioning, 425/65R22.5
front and 11.00R22 rear tires. In good condition with good tires. (Odometer
Reading N/A - Illegible) (Meter Reads 27,124 Hours) |
| 67 |
$9,000.00 |
2003 PEERLESS Model 45-CTSSF, 45' Tandem Axle
Walking Floor Trailer, VIN# 1PLE0452X3PJ53097, equipped with Keith walking
floor, manual tarp, air ride suspension, 65,000 lb GVWR, swing rear doors,
aluminum wheels, and 11R24.5 tires. In good condition with good tires. |
| 68 |
$5,000.00 |
1999 TRAIL-STAR 45' Tandem Axle Walking Floor
Trailer, VIN# 1T9SF45BXX1066806, equipped with Keith walking floor, air ride
suspension, single barn door gate, aluminum frame, and 11R24.5 tires. In fair
to good condition with fair to good tires. (Floor Operates - Slats In Poor
Condition) (7 Broken Cross Members) |
| 69 |
$3,400.00 |
1992 PEERLESS Model 42-CTSSF, 42' Tandem Axle
Walking Floor Trailer, VIN# 1PLE04227NPD81150, equipped with manual tarp,
spring suspension, rear swing doors, steel frame, and 11R22.5 tires. In fair
to good condition with good tires. (Floor Operates - Slats In Fair Condition) |
| 70 |
$8,750.00 |
1986 TUSCO Model THG60, 60 Ton Tri-Axle
Lowboy Trailer, VIN# 2T9THG6004001579, equipped with non ground bearing
detachable gooseneck, wetline, 102" x 22'6" level deck, 12' deck
over axles, air ride suspension, outriggers (removed), chain dogs, and
275/70R22.5 tires. In fair to good condition with fair to good tires. (Year, Mfg, Model, and VIN From Title) (Missing VIN Plate) |
| 71 |
$3,300.00 |
2001 FORD Model F-450XL Super Duty 4x4
Service Truck, VIN# 1FDXF47F21ED05000, powered by 7.3L diesel engine and
automatic transmission, equipped with Knapheide 11' open service body, Auto
Crane 4004EH, 4,000 lb 3-section service crane, gas powered air compressor,
oxygen/acetylene torch set, dual rear wheels, work bumper with vise, cruise
control, and air conditioning. In fair condition with fair tires. (Odometer
Reads 213,090 Miles) (Runs Rough) (Hood Damage) (Service Crane Not Operating)
(LINCOLN WELDER NOT INCLUDED) |
| 72 |
$800.00 |
1986 CHEVROLET Single Axle Fuel/Lube Truck,
VIN# 1GBM7D1G2GV119122, powered by Detroit 8.2L diesel engine and 5 speed transmission
with 2 speed rear, equipped with (8) product tanks, (6) product reels, and
(2) fuel reels. (Odometer Reads 136,576 Miles) (Off Road Use) (Truck Runs and
PTO Good) (Radiator Leaks) |
| 73 |
$700.00 |
GMC Single Axle Dump Truck, VIN#
CE531P101218, powered by V-6 gas engine and 5 speed transmission with 2 speed
rear, equipped with 14'6" steel dump body, 1,000 gallon steel water
tank. In fair condition. (Site Truck Only - No title) (Truck Runs and Dumps) |
| 74 |
$10.00 |
Portable Water Tank, approximately 500
gallon, steel tank, and pintle tow |
| 75 |
$275.00 |
500 Gallon Skid Mounted Fuel Tank, with 12
volt electric pump and meter |
| 76 |
$10.00 |
MORLIFT 400 Hydraulic Boom (For Parts) |
| 77 |
$125.00 |
Single Axle Fifth Wheel Dolly (no tow hitch)
and Tandem Axle Bogie |
| 78 |
$15.00 |
MORBARK Chute |
| 79 |
$20.00 |
(5 Pallets) Conveyor Belting |
| 80 |
$5.00 |
Bucket Teeth |
| 81 |
$20.00 |
Rollers and Plastic Conveyor Belt Wear Pads |
| 82 |
$75.00 |
MORBARK 7600 Feed Chain Master Links and Pins |
| 83 |
$15.00 |
50" x 8'10" Steel Grizzley |
| 84 |
$1.00 |
Transport Axle and Engine Covers |
| 85 |
$100.00 |
Hanging Bucket Forks |
| 86 |
$25.00 |
(3) Bolt-On Forks |
| 87 |
$40.00 |
Plexiglass Cab Windows |
| 88 |
$60.00 |
Undercarriage Rollers, Idler, and Planetary
(Daewoo/Doosan) |
| 89 |
$5.00 |
(2) Hydraulic Cylinders (Barrel Only - No
Pistons) (Daewoo/Doosan) |
| 90 |
$2,100.00 |
Feed Chain (Morbark 7600) |
| 91 |
$60.00 |
Magnetic Head Pulley and (2) Tail Pulleys |
| 92 |
$550.00 |
Magnetic Head Pulley (Morbark 1300) |
| 93 |
$10.00 |
(4 Pallets) Parts |
| 94 |
$850.00 |
GARDNER DENVER 190CFM Portable Air
Compressor, s/n 1907039, powered by JD diesel engine, with air hose (Runs and
Makes Air) |
| 95 |
$10.00 |
60" PTO Brush Hog |
| 96 |
$10.00 |
(7) Rubbermaid Dump Hoppers, with poly tubs |
| 97 |
$225.00 |
KEITH Walking Floor Hydraulic Cylinder Set |
| 98 |
$10.00 |
(6) Air Compressors and Generator (For Parts) |
| 99 |
$15.00 |
Steel Tank, with manual pump |
| 100 |
$70.00 |
(4) Steel Tanks |
| 101 |
$400.00 |
(3) 30.5L-32 Logging Tires, on rims |
| 102 |
$40.00 |
Skidder Tire Chains |
| 103 |
$0.00 |
(4) 17.5R25 Tires |
| 104 |
$5.00 |
(8) Logging Tires |
| 105 |
$0.00 |
(7) 23.5-25 Tires |
| 106 |
$5.00 |
(10) Assorted Tires |
| 106A |
$225.00 |
(5) 295/75R22.5 Tires (4 With Rims) |
| 106B |
$0.00 |
(6) 11.00 and 10.00 Series Tires |
| 106C |
$15.00 |
(20) Assorted Truck Tires |
| 106D |
$275.00 |
(5) 10.00R15 Trailer Tires |
| 107 |
$10.00 |
(5) Steel Rims |
| 107A |
$120.00 |
MERCRUISOR 260, V-8 Marine Engine, with
outdrive (Engine Purchased New Several Years Ago - Limited Use Since) |
| 108 |
$425.00 |
Chain Saw Repair Station, with bars and
chains and (6) Non Running Chain Saw Motors and Parts |
| 109 |
$50.00 |
NORTH AMERICAN 5500 Watt Diesel Generator
(Runs - No Electric) |
| 110 |
$5.00 |
EMGLO Gas Powered Air Compressor (Not
Running) |
| 111 |
$375.00 |
Hydraulic Cylinders and Tub Grinder Rollers |
| 112 |
$1.00 |
(3) Rolling Skids and Tow Bar |
| 113 |
$70.00 |
KARCHER Pressure Washer (Runs - Burner Not Operating)
(No Hose) |
| 114 |
$15.00 |
CRAFTSMAN Air Compressor |
| 115 |
$120.00 |
Oxygen/Acetylene Hose, Torches, and Gauges |
| 116 |
$255.00 |
(6) Acetylene and (2) Oxygen Bottles |
| 117 |
$1,050.00 |
(7) 4' x 10' x 1/4" Steel Plates |
| 118 |
$550.00 |
(2) 3' x 8' x 1/2" Steel Plates |
| 119 |
$40.00 |
Bumper Face Bar and Diamond Plate Panel |
| 120 |
$95.00 |
Tree Tying Cable and Hardware |
| 121 |
$0.00 |
(2 Pallets) Chain Binders |
| 122 |
$15.00 |
Chevy Truck Parts |
| 123 |
$0.00 |
(2) Tool Boxes |
| 124 |
$0.00 |
Pickup Cross Box |
| 125 |
$5.00 |
Air Hose and Safety Triangles |
| 126 |
$25.00 |
Road Signs and Stands |
| 127 |
$15.00 |
Conveyor Belt Splicing Hardware |
| 128 |
$70.00 |
Gas Engines (Parts) (In Shed) |
| 129 |
$1.00 |
(5) Backpack Blowers (Parts) (In Shed) |
| 130 |
$5.00 |
Brake Drum and Wheel Parts (In Trailer) |
| 131 |
$5.00 |
Lighting and Exhaust Parts (In Trailer) |
| 132 |
$450.00 |
(2) Towing Light Bars, with power cords (In
Trailer) |
| 133 |
$35.00 |
Assorted Grinder Parts (In Trailer) |
| 134 |
$250.00 |
Cat Air, Oil, and Fuel Filters, and Parts (In
Trailer) |
| 135 |
$20.00 |
Air, Oil, and Fuel Filters (In Trailer) |
| 136 |
$80.00 |
Trailer Wire (In Trailer) |
| 137 |
$1.00 |
HUSQVARNA Power Head, with brush cutter and
Hedge Trimmer (Not Running) (In Trailer) |
| 138 |
$5.00 |
Tree Climbing Ropes (In Trailer) |
| 139 |
$260.00 |
Cat Service and Parts Manuals (In Trailer) |
|
|
