|
To search Listing, use Control F (PC), Command F (MAC)
Wednesday, November 11, 2020 |
Devonian Resources, Inc. Pleasantville, Pennsylvania
|
Absolute Auction |
Notice: After many years in the oil and gas production business, Devonian Resources has decided to sell equipment surplus to their present needs. Everything in the auction is owned by Devonian, with the exception of a few consignments, and will positively sell to the highest bidder regardless of price! |
Location: 15566 Tionesta Road, Pleasantville, PA 16341 (Please Note: There will be NO LIVE BIDDING onsite) |
LIVE, VIRTUAL AUCTION: Due to the recommendations of the CDC and State and Local mandates in response to the Covid-19 outbreak and out of an abundance of caution for the health and wellbeing of all, this auction is being conducted via LIVE, VIRTUAL ONLINE ONLY. There will be NO LIVE BIDDING FROM THE SITE. ADDITIONALLY, there will be NO PAYMENTS accepted at the auction site! Payment must be paid either by wire transfer or credit card. |
Online Bidding: Live internet bidding will be provided by Proxibid. Proxibid will charge an Internet Service Provider Fee of 5% to the successful internet bidder for items over $10,000 and 10% for items $10,000 and under, for each lot purchased on-line. All bidders are required to register to bid through Proxibid. |
Terms: Complete payment immediately after receipt of invoice by wire transfer or credit card only. Credit card payments will be charged a 3% processing fee. |
Sales Tax: Since this contractor is selling items not normally sold in the course of his business, the Commonwealth of Pennsylvania considers this an isolated sale and does not require the auction company to collect sales tax. |
Removal: After complete payment, items may be removed Thursday, and Friday, November 12th and 13th and Monday and Tuesday, November 16th and 17th from 8:00am until 4:00pm. All items must be removed no later than Tuesday, November 17th, 2020 by 4:00pm. |
PA Auction License No: AY000281 |
1 |
$650.00 |
RIDGID 535 Power
Threader, s/n AM14119F9, equipped with threader head, reamer cutter and foot
control, cart mounted. In good condition. |
2 |
$1,200.00 |
LINCOLN Ranger 10,000,
225 Amp Gas Powered Welder, s/n U1050414508, equipped with leads. In good
condition. (Meter Reads 0,557 Hours) |
3 |
$850.00 |
MILLER Millermatic 251 MIG Welder, s/n LC467197, equipped with
wire feed and leads. In good condition. |
4 |
$375.00 |
ESAB Multimaster 260 MIG Welder, s/n MP-J914006, equipped with wire feed and leads. In good
condition. |
5 |
$10.00 |
LINCOLN Model AC225
Electric Welder, with leads. |
6 |
$950.00 |
VICTOR Thermal Dynamics
52 Cut Master Plasma Cutter, s/n MX1336025750. In good condition. |
7 |
$375.00 |
JET Horizontal Metal
Cutting Band Saw. In good condition. |
8 |
$475.00 |
SUN 35 Ton Hydraulic Shop
Press |
9 |
$2,300.00 |
2012 WANCO INC. Model
CPLT-MO Portable Light Plant, s/n 5F13D1415C1000048, powered by Kohler gas
engine, equipped with 6 KVA generator, manual raise, (4) lights, and 17.5-13
tires. In good condition with good tires. (Meter Reads 648 Hours) (All Lights
Good) |
10 |
$6,750.00 |
ATLAS COPCO Model
XAS185JD7PE, 185CFM Portable Air Compressor, s/n AIA1591586 (on compressor
head), H0P035863 (owner supplied), powered by John Deere 4 cylinder diesel
engine, 205/75D15 tires. In good condition with good tires. (Meter Reads
00,802 Hours) (Serial Number Plate Missing) |
11 |
$10,250.00 |
1993 JOHN DEERE Model
310D, 4x4 Tractor Loader Extend-A-Hoe, s/n 794593, powered by John Deere 4039
diesel engine and shuttle transmission, equipped with general purpose loader
bucket, WB 24" digging bucket, ROPS cab with heat, 12-16.5 front and
19.5-24 rear tires. In fair condition with fair tires. (Meter Reads 5,504
Hours) (Extend Cylinder Leaking) (Bad Hydraulic Pump - No Hydraulic Functions
Operating; Transmission and 4x4 OK) |
12 |
$17,000.00 |
1987 CATERPILLAR Model
D5H Crawler Tractor, s/n 8RC01071, powered by Cat 3304 diesel engine and
powershift transmission, equipped with 6-way straight blade, Cat model 55H
hydraulic winch, s/n 2EJ00448, ROPS canopy, and 20" SBG pads. In good
condition with good undercarriage. (Meter Reads 09,050 Hours) (Winch
Operates) |
13 |
$7,500.00 |
1970 CATERPILLAR Model
D6C Crawler Tractor, s/n 10K04014, powered by Cat 3306 diesel engine and
powershift transmission, equipped with Hyster D6E winch and draw bar, rear
gin pole, 114" straight blade with hydraulic tilt, ROPS canopy with
sweeps and rear screen, and 22" SBG pads. In good condition with good
undercarriage. (Meter Reading N/A) (Tilt Cylinder Frozen) (Winch Operates) |
14 |
$7,000.00 |
1976 CATERPILLAR Model
D6C Crawler Tractor, s/n 10K12236, powered by Cat 3306 diesel engine and
powershift transmission, equipped with Hyster winch with draw bar, 148"
manual angle, twin hydraulic tilt blade, ROPS canopy with rear screen, and
22" SBG pads. In fair condition with fair undercarriage. (Meter Reads
01,095 Hours) (Winch Operates) |
15 |
$6,000.00 |
1973 CATERPILLAR Model
D6C Crawler Tractor, s/n 10K08908, powered by Cat 3306 diesel engine and
powershift transmission, equipped with Cat 56E winch with draw bar, 120"
straight blade with hydraulic tilt, ROPS canopy with sweeps and rear screen,
and 20" pads. In fair condition with good undercarriage. (Right Lift
Jack Removed) (Not Running - Engine Complete) |
16 |
$4,600.00 |
2006 RAM Model 2500, 4x4
Heavy Duty Pickup Truck, VIN# 3D7KS26C16G146983, powered by Cummins 6
cylinder diesel engine and automatic transmission, equipped with bed with
liner, tow package, Boss 8' snowplow with quick-tach, air conditioning, and
255/70R17 tires. In fair condition with good tires. (Odometer Reads 141,127
Miles) (Rear Fenders and Tailgate Rusted) (4x4 Good) (DANNIC) |
17 |
$17,000.00 |
2005 PETERBILT Model
PB335 Tandem Axle Water Truck VIN# 2NPLLD0X65M871867, powered by Cat C7,
350HP diesel engine and Eaton Fuller 8LL, 10 speed transmission, equipped
with 70 barrel water tank, Masport 3" PTO
driven vacuum water pump, rear spray bar, oilfield front bumper, engine
brake, double frame, Paccar beam & rubber block suspension, 264"
wheelbase, double frame, 18,000# front and 40,000# rear axles, 58,000# GVWR,
air conditioning, aluminum wheels, power heated mirrors, cruise control,
315/80R22.5 front and 11R22.5 rear tires. In good condition with good tires.
(Odometer Reads 222,745 Miles) Meter Reads 13,593 Hours) |
18 |
$20,000.00 |
Unit #49 2005 MACK Model
CV713 Granite Tri-Axle Oil Vac Truck, VIN# 1M2AG10C15M026585, powered by Mack
AL460, 460HP diesel engine and Maxitorque T18L/L21/LR/LR21, 18 speed
transmission, equipped with Dickirson 100BBL
pressurized oil vac body, s/n 4380/38/8, model Dickirson H400W vac pump with spark prevention, Mack 46,000# rears, 18,000# front axle,
13,200# lift axle, 75,200# GVWR, double frame, camelback suspension, PTO
discharge pump, steerable lift axle, aluminum wheels, 3-stage engine brake,
power windows and locks, heated mirrors, cruise control, air conditioning,
315/80R22.5 front, 255/70R22.5 lift, and 11R24.5 rear tires. In good
condition with good tires. (Odometer Reads 267,390 Miles) (DANNIC) |
19 |
$20,000.00 |
2005 MACK Model CV713
Granite Tandem Axle Water Truck, VIN# 1M2AG11CX5M017639, powered by Mack
AMI370, 370HP diesel engine and
Maxitorque T310M/MLR, 10 speed multi-speed reverse transmission, equipped
with BCA 80BBL pressurized tank, s/n 1273, Masport vac pump, 46,000# rears, double frame, spring suspension, aluminum wheels,
heated mirrors, cruise control, air conditioning, 315/80R22.5 front and
11R24.5 rear tires. In good condition with good tires. (Odometer Reads
380,834 Miles) (Meter Reads 26,748 Hours) (DANNIC) |
20 |
$11,000.00 |
2001 MACK Model RD688S
Tandem Axle Water Truck, VIN# 1M2P270C51M059868, powered by Mack E-7, 400HP
diesel engine and Eaton Fuller 8LL 10 speed transmission, equipped with 80
barrel steel water tank, Masport 3" PTO driven
vacuum water pump, rear spray bar, oilfield front bumper, Jacobs engine
brake, double frame, Mack camelback spring suspension, 217" wheel base,
16,000# front and 40,000# rear axles, 58,000# GVWR, air conditioning, heated
mirrors, cruise control, 385/65R22.5 front and 11R24.5 rear tires. In good
condition with good tires. (Odometer Reads 401,589 Miles) (Meter Reads 2,538
Hours) |
21 |
$9,250.00 |
1999 MACK Model RD688S
Tandem Axle Water Truck, VIN# 1M2P267Y0XM038205, powered by Mack E7-350,
350HP diesel engine and Eaton Fuller 10 speed transmission, equipped with 80
barrel steel water tank, Masport 3" PTO driven
vacuum water pump, rear spray bar, oilfield front bumper, engine brake,
double frame, Mack camelback spring suspension, 217" wheel base, 16,000#
front and 40,000# rear axles, 58,000# GVWR, air conditioning, heated mirrors,
cruise control, and 11R22.5 tires. In good condition with good tires.
(Odometer Reads 558,254 Miles) (Meter Reads 18,855 Hours) (PTO Driveshaft
Removed and In Cab - Bad U-Joints) |
22 |
$3,000.00 |
1981 JOY Model 1050-125
Air Compressor, s/n 81736681, powered by Cat 3406 diesel engine, equipped
with Joy rotary screw single stage compressor, heat exchangers, mounted on an
oilfield skid base. In good condition. (Meter Reading N/A) (Fresh Batteries) |
23 |
$3,000.00 |
1980 JOY Model 1050-125
Air Compressor, s/n 806271080, powered by Cat 3406 diesel engine, equipped
with Joy rotary screw single stage compressor, heat exchangers, mounted on an
oilfield skid base. In good condition. (Meter Reading N/A) (Fresh Batteries) |
24 |
$3,100.00 |
1982 JOY Model 1050-125
Double Air Compressor Package, s/n unknown (ID plate missing), powered by (2)
Cat 3406 diesel engines, equipped with (2) Joy rotary screw single stage
compressors, heat exchangers, mounted on an oilfield skid base. In fair
condition. (Meter Reading N/A) (1 Engine Not Running) (Fresh Batteries - (1)
Engine) |
25 |
$3,100.00 |
1982 JOY Model 1050-125
Double Air Compressor Package, s/n unknown (ID plate missing), powered by (2)
Cummins 903 diesel engines, equipped with (2) Joy rotary screw single stage
compressors, heat exchangers, mounted on an oilfield skid base. In fair
condition. (Meter Reading N/A) (1 Engine Not Running) (Fresh Batteries - (1)
Engine) |
26 |
$3,100.00 |
1981 JOY Model WB-12X7-5,
2-Stage 950PSI Air Booster Package s/n 81360-2, powered Cat 3406 diesel
engine, equipped with air starter, twin-disk clutch, Joy piston booster, heat
exchangers, mounted on an oilfield skid base. In good condition. (Meter
Reading N/A) (Zero Hours on Air End Rebuild "2011" by Abby
Services) |
27 |
$2,700.00 |
1980 JOY Model WB-12 Air
Booster Package s/n 80-529, powered by Cat 3406 diesel engine, equipped with
air starter, twin-disk clutch, Joy piston booster, heat exchangers, mounted
on an oilfield skid base. In fair condition. (Meter Reading N/A) (Engine Not
Running) |
28 |
$25.00 |
JOY 1050-125 Rotary Air
End |
29 |
$55,000.00 |
2009 SULLAIR Model
900XHH-1150XH, 1150CFM High Pressure Air Compressor, s/n 200909240075,
powered by Cat C-15, 540HP diesel engine, equipped with 350 PSI, mounted on
an oilfield skid base. In good condition. (Meter Reads 2,493 Hours) |
30 |
$38,000.00 |
1977 CHICAGO PNEUMATIC
Model 7000 Top Head Drive Rotary Drilling Rig s/n 97328, powered by Cat 3406
deck engine, equipped with GHH 825-300 air compressor, 43' hydraulic raise
mast, 7" diameter 70,000 lb. hydraulic pull back and pull down hydraulic
cylinders, 8,000 lb. hydraulic winch and hydraulic jib, hydraulic break-out
wrench, pipe carousel, table bushings, fold up rear platform, 3-hydraulic
outriggers, 120-volt work lights, mounted on 1975 Mack model DM600 tandem
axle chassis, VIN# DM492S1239, powered by Mack 300 diesel engine and Mack 6
speed lo-hole transmission, equipped with Jacobs engine brake, Mack camelback
spring suspension, 216" wheelbase, 445/65 22.5 front and 11.00-20 rear
tires. In fair to good condition. (Upper Meter Reads 4,441 Hours) (Odometer
Reads 060,157 Miles) (Top Head Drive Leaking) |
31 |
$2,200.00 |
(41 Sections) 4-1/2"
x 30' Drill Pipe (Chicago Pneumatic) and (1 Set) 28' Pipe Racks |
32 |
$20,000.00 |
1978 WALKER-NEER Model
C33-A Triple Drum Service Rig, s/n 2178, equipped with right angle drive,
cable raise and telescope 5-1/2" x 7-1/2" x 65' double pole mast,
spud beam, (the third drum has been removed), auxiliary 8,000 lb. hydraulic
winch, air clutches, cat head, spooling device and sheave, cab protector,
auxiliary hydraulic tong circuit, 2-hydraulic outriggers, tool box, 2-sheave
traveling block, weight indicator, mounted on 1978 International model F-2574
tandem axle chassis, VIN# CF257HHA20526, powered by Cummins 300 diesel engine
and Fuller 6 speed transmission, equipped with double frame, Hendrickson beam
suspension, 228" wheelbase, 425/65R22.5 front and 11R22.5 rear tires. In
fair condition with good tires. (Odometer Reads 082,888 Miles) |
34 |
$375.00 |
1973 CHEVROLET Model C-60
Winch Truck, VIN# CCE613V148826, powered by 8 cylinder gas engine and 5 speed
transmission with 2 speed rear, equipped with Leland 9' A-frame winch body,
PTO with chain drive, and 9.00x20 tires. In fair condition with good tires.
(Odometer Reads 55,789 Miles) (Not Running) |
35 |
$800.00 |
1983 INTERNATIONAL Model
G2504 Tandem Axle Truck Tractor, VIN# 1HTCG2505DHA16124, powered by Int'l 8
cylinder diesel engine and Fuller 13 speed transmission, equipped with 12'
steel deck with sloped tail, tail roller, stationary 5th wheel, Jacobs
2-stage engine brake, PTO with chain drive, and 11R24.5 tires. In fair
condition with fair to good tires. (Odometer Reads 140,134 Miles) (Not
Running) |
36 |
$800.00 |
1979 DICKIRSON Tandem
Axle Oilfield Float Trailer, VIN# 1283S, equipped with 32'x8' wood deck,
7-1/2" rolling tailboard, fold-up landing gear, spring suspension, and
10.00-20 tires. In fair to poor condition with fair tires. (The rear apron
and frame of the trailer have rust holes) |
37 |
$1,300.00 |
1981 ROGERS Model
CH55LH1940-1.5, Tandem Axle Rigid Neck Lowboy Trailer, VIN# D5159, equipped
with 8'x24' main deck, 7'6" over axles, walking beam suspension, rolling
tailboard, and 11R17.5 tires. In fair condition with good tires. (Rust
Issues) |
38 |
$800.00 |
1981 LOADCRAFT Model
L-35-SS, 35 Ton Tandem Axle Rigid Neck Lowboy Trailer, VIN#
1LDB38205BB810324, equipped with 9' upper deck, 8'x20' main deck, 8' over
axles, 3' beavertail, 5' ramps, and 11R17.5 tires. (TITLE DELAY) |
39 |
$1,700.00 |
1981 ATOKA 50 Ton
Tri-Axle Rigid Neck Lowboy Trailer, VIN# AT812267, equipped with 8'x24' main
deck, 12' over axles, rolling tailboard, and 11R17.5 tires. In fair condition
with fair to good tires. |
40 |
$1,500.00 |
20'x8' Dog House,
equipped with work bench, cabinets, electric ceiling lights, mounted on 35'
oilfield skid base. In fair condition. |
41 |
$325.00 |
35' x 8' Dog House,
equipped with cabinets, work bench, counters, electric ceiling lights, right
side fold-up cat walk, diesel fuel tank, mounted on 1949 Fruehauf tandem axle
trailer with spring suspension, and 10.00-22 tires. In fair condition with
fair to poor tires. |
42 |
$325.00 |
10'x6'6" Dog House,
mounted on 18' oilfield skid base. In fair condition. |
43 |
$130.00 |
12'6"x16' 2-Piece
Cable Tool Dog House, mounted on oilfield skid base. In fair condition. |
44 |
$3,500.00 |
BETHLEHEM POWER PUMP
Model H-150 6 x 12 Duplex Mud Pump, s/n 137, powered by Cat D343 diesel
engine and Twin-Disk PTO clutch, equipped with 12" stroke, 4" x 40'
hard suction hose, mounted on an oilfield skid base. In fair condition.
(Running and Operating) |
45 |
$550.00 |
37'x8' Mud Tank, mounted
on oilfield skid base. In good condition. |
46 |
$500.00 |
31'4"x7'4"
Water Tank, equipped with 7' 4" x 2' auxiliary water tank compartment
mounted on an oilfield skid base. In poor condition. (Outer Casing Rusted) |
47 |
$325.00 |
28'x6'10" Open Top
Water Storage Tank, with oilfield skid base. |
48 |
$400.00 |
2,100 Gallon Poly Tank |
49 |
$400.00 |
2,100 Gallon Poly Tank |
50 |
$35.00 |
2,100 Gallon Poly Tank |
51 |
$100.00 |
500 Gallon Poly Tank |
52 |
$0.00 |
500 Gallon Poly Tank |
53 |
$0.00 |
425 Gallon Poly Tank |
54 |
$0.00 |
425 Gallon Poly Tank |
55 |
$0.00 |
325 Gallon Poly Tank |
56 |
$0.00 |
270 Gallon Poly Tank |
57 |
$225.00 |
3,000 Gallon Skid Mounted
Fuel Storage Tank |
58 |
$100.00 |
1,000 Gallon Skid Mounted
Fuel Storage Tank |
59 |
$100.00 |
UNUSED DEMCO
6"x8" Centrifugal Pump |
60 |
$200.00 |
UNUSED DEMCO
5"x6" Centrifugal Pump |
61 |
$25.00 |
(2) 3" Trash Pumps,
Honda GX270 gas (One Not Running) |
62 |
$25.00 |
3" Diaphragm Pump |
63 |
$0.00 |
VM 2" Diaphragm Pump |
64 |
$0.00 |
WILDEN M8, 2"
Diaphragm Pump |
65 |
$5.00 |
2" and 3"
Discharge Hose |
66 |
$20.00 |
Skid Mounted Separator,
with meter run, meter house, and Barton flow meter |
67 |
$20.00 |
Skid Mounted Separator,
with meter run and meter house. |
68 |
$300.00 |
35'x7'10" Pipe Boat,
equipped with tapered wood deck, 8" pipe skids, stake pockets, and draw
bars. In good condition. (Needs Re-Decked) |
69 |
$300.00 |
32'x7'6" Pipe Boat,
equipped with tapered wood deck, 8" pipe skids, stake pockets, and draw
bars. In good condition. (Needs Re-Decked) |
70 |
$300.00 |
30'x7' Pipe Boat,
equipped with wood deck, 8" pipe skids, stake pockets, and drawbars. In
good condition. (Needs Re-Decked) |
71 |
$700.00 |
36"x7'8" Pipe
Tub |
72 |
$2,100.00 |
35x7'4" Pipe Tub |
73 |
$700.00 |
35'x7'4" Pipe Tub |
74 |
$425.00 |
35'x7'4" Pipe Tub |
75 |
$525.00 |
(1 Set) 28' Pipe Racks |
76 |
$125.00 |
(1 Set) 20' Pipe Racks |
77 |
$55.00 |
(1 Set)20' Pipe Racks |
78 |
$350.00 |
(1 Set) 19' Pipe Racks |
79 |
$450.00 |
(46 Pieces) 2-3/8"
Range 3 Well Casing (25' to 40' lengths) (RACK NOT INCLUDED) |
80 |
$4,300.00 |
(93 Pieces) 4-1/2"
Range 3, 40' Well Casing (RACK NOT INCLUDED) |
81 |
$50.00 |
HALKO 8" Top HOle Hammer, with 12" bit and 10" stabilizer. |
82 |
$200.00 |
HALKO 8" Top Hole
Hammer, with 8-1/2" bit and 8" stabilizer. |
83 |
$100.00 |
HALKO 6" Down Hole
Hammer, with 6-1/4" bit and 6" stabilizer. |
84 |
$125.00 |
HALKO 6" Down Hole
Hammer |
85 |
$140.00 |
HALKO 6" Down Hole
Hammer |
86 |
$10.00 |
HALKO 6" Down Hole
Hammer |
87 |
$10.00 |
HALKO 6" Down Hole
Hammer |
88 |
$185.00 |
10" Top Hole Hammer |
89 |
$700.00 |
(10) Assorted Size Rotary
Stabilizers |
90 |
$800.00 |
(14) Assorted Size Cable
Tool Bailers and Stems |
91 |
$800.00 |
UNUSED 4-1/2"x21'
Sand Pump |
92 |
$10.00 |
UNUSED 19" Tri-Cone
Bit |
93 |
$55.00 |
12" Tri-Cone Bit |
94 |
$55.00 |
12" Tri-Cone Bit |
95 |
$55.00 |
12" Tri-Cone Bit |
96 |
$20.00 |
15" Tri-Core Bit,
with breaker |
97 |
$210.00 |
17" Hammer Bit |
98 |
$1,400.00 |
BJ Hydraulic Power Pipe
Tongs, with 3-1/2" pipe die |
99 |
$130.00 |
FDT 1160 Pipe Tongs |
100 |
$650.00 |
GAIBERSON 40 Ton
Pneumatic Pipe slip, with foot control |
101 |
$130.00 |
Assorted Pipe Slips and
Bowls |
102 |
$1,500.00 |
(18) Assorted Size and
Style Pipe Elevators |
103 |
$150.00 |
Assorted Size Door Latch
Pipe Elevators |
104 |
$175.00 |
Assorted Size Door Latch
Pipe Elevators |
105 |
$40.00 |
(6) Pipe Lifting Eyes |
106 |
$700.00 |
Break Out Jack and
Wrenches |
107 |
$1,150.00 |
Assorted Cable Drill
Cable Tools and Fishing Tools |
108 |
$75.00 |
(7) Snatch Blocks |
109 |
$10.00 |
8-1/2" Hy Drill Blow
Out Preventer |
109A |
$10.00 |
WASHINGTON ROTATING Air
Head |
110 |
$5.00 |
WASHINGTON ROTATING Oiler |
111 |
$0.00 |
WASHINGTON ROTATING Oiler |
112 |
$0.00 |
Oil Day Tank |
113 |
$25.00 |
Mud Pump Air Chamber |
114 |
$475.00 |
(6) Oil Pump Jacks |
115 |
$300.00 |
Oil Pump Jacks and Pump
Jack Parts |
116 |
$1,100.00 |
CARDWELL 44' Single Pole,
Single Drum, Telescoping Service Rig, on oilfield skid |
117 |
$250.00 |
HOOKERMACH 28B Skid
Mounted Rotating Table |
118 |
$550.00 |
CP 700, 32' Drill Mast,
with 5-steel carousel and top head gear box |
119 |
$400.00 |
CAT D343 Diesel Engine,
with manual clutch and 10 v-belt sheave (Condition Unknown - Not Running) |
120 |
$350.00 |
WAUKESHA 4 Cylinder
Diesel Engine (Condition Unknown) |
121 |
$225.00 |
Tandem Axle Winch Tractor
Bed, with tail roller, 5th wheel, and winch stand |
122 |
$25.00 |
Winch Tractor Flatbed |
123 |
$225.00 |
TULSA Chain Drive Winch,
with headache rack |
124 |
$100.00 |
BRADEN Chain Drive Winch,
with headache rack |
125 |
$100.00 |
BRADEN Chain Drive Winch,
with headache rack |
126 |
$100.00 |
FRUEHAUF Chain Drive
Winch, with headache rack |
127 |
$30.00 |
(2) TULSA Chain Drive
Winches |
128 |
$80.00 |
(2) MACK Truck Hoods |
129 |
$40.00 |
100 Gallon Pickup Fuel
Tank |
130 |
$40.00 |
100 Gallon Pickup Fuel
Tank |
131 |
$10.00 |
Pickup Headache Rack |
132 |
$10.00 |
Pickup Headache Rack |
133 |
$10.00 |
Pickup Headache Rack |
134 |
$10.00 |
Pickup Headache Rack |
135 |
$55.00 |
GEARMATIC Hydraulic Winch |
136 |
$1,400.00 |
DETROIT 12V-71 Diesel
Engine (Reported To Be A Running Takeout - Condition Unknown - Engine Turns
Free) |
137 |
$400.00 |
CAT 1673 Diesel Engine,
with 5 speed transmission |
138 |
$700.00 |
COOPER AV1ANA,
4-1/4" Twin Head Single Stage Skid Mounted Air Compressor, s/n 778648,
Waukesha 4 cylinder diesel engine with Twin Disc manual clutch (Hours N/A)
(Condition Unknown) |
139 |
$35.00 |
Dual Skid Mounted GARDNER
DENVER Size 401/4 Air Compressors |
140 |
$25.00 |
GARDNER DENVER Gear Box |
141 |
$350.00 |
Cable Drill Cable Tools
and Rack |
142 |
$950.00 |
Cable Drill Cable Tools
and Miscellaneous (Contents of Shed) (BUYER MUST LOAD) |
143 |
$950.00 |
Cable Drill Cable Tools
and Miscellaneous (Contents of Shed) (BUYER MUST LOAD) |
|
|