| 1 |
$3,000.00 |
UNUSED MQ WHITEMAN Model WM-90SH8 Portable Mortar Mixer, s/n
AD757382, powered by Honda 8HP gas engine, equipped with B78-13 tires. In
excellent condition. |
| 2 |
$600.00 |
GILSON Portable Mortar Mixer, s/n Unknown, powered by Briggs
& Stratton 9HP gas engine, equipped with B78-13 tires. In good condition
with good tires. |
| 3 |
$1,900.00 |
LONGYEAR Walk Behind Concrete Saw, Wisconsin 65HP gas,
hydrostatic (253 Hours) |
| 4 |
$600.00 |
1995 DIETZ Model D2000 Portable Arrow Board, s/n 156, powered by
Kubota EL300-E diesel engine, equipped with E78-14 tires. In very good
condition with good tires. (Meter Reads 00,156 Hours) |
| 5 |
$750.00 |
1995 DIETZ Model D2000 Portable Arrow Board, s/n 138, powered by
Kubota EL300-E diesel engine, equipped with E78-14 tires. In very good
condition. (Meter Reads 00,074 Hours) |
| 6 |
$8,250.00 |
2007 INGERSOLL RAND Model L6-4MH Portable Light Plant, s/n
380267ULQC45, VIN# 4FVLSBDA37U380267, powered by Kubota D905 diesel engine,
equipped with (4) removable/stowable lights, manual raise and lower, and
175/80D13 tires. In very good condition with good tires. (Meter Reads 00,406
Hours) |
| 7 |
$7,250.00 |
1996 INGERSOLL RAND Model L6-4MH Portable Light Plant, s/n
259595UIG823, powered by Kubota D905-E diesel engine, equipped with (4)
removable/stowable lights, manual raise and lower, and 185/80R13 tires. In
very good condition with good tires. (Meter Reads 01,203 Hours) |
| 8 |
$13,000.00 |
1993 INGERSOLL RAND Model E50XWCU, 50KW Portable Generator, s/n
233534UED811, powered by Cummins 4BT3.9-G1 diesel engine, equipped with
single/3-phase, 120/240 volt plugs, sound
suppression, and 215/75R15 tires. In very good condition with good tires.
(Meter Reads 2,520 Hours) (Generator Info Sticker Illegible) (2,519 Hours) |
| 9 |
$15,500.00 |
1999 INGERSOLL RAND Model P185WJD, 185CFM Portable Air
Compressor, s/n 294953UJI221, powered by John Deere diesel engine, equipped
with dual hose reels, water separator, folding tongue, and 215/75R15 tires.
In very good condition with good tires. (Meter Reads 00,282 Hours) |
| 10 |
$6,000.00 |
1987 INGERSOLL RAND Model P-185A-W-JD, 185CFM Portable Air
Compressor, s/n 163642U87957, powered by John Deere 4239DF diesel engine,
equipped with 215/75R15 tires. In good condition with good tires. (Meter Reads
03,219 Hours) |
| 11 |
$38,000.00 |
1995 MORBARK Model 17 Portable Drum Chipper, s/n
4S8SZ1511SW002408, powered by John Deere 6068T diesel engine and Twin Disc
PTO, equipped with auto feed system, rotating discharge chute, and 12-16.5
tires. In good to very good condition with good to very good tires. (Meter
Reads 00,550 Hours) |
| 12 |
$23,500.00 |
1995 FORD/NEW HOLLAND Model 2120, 4x4 Utility Tractor, s/n
UV28045, powered by 42HP diesel engine and hydraulic shuttle shift
transmission with 12 forward and 4 reverse gears, equipped with New Holland
7309 loader attachment, general purpose bucket, 3-point hitch, rear PTO, rear
auxiliary hydraulics, drawbar, ROPS canopy, 9.5-16 front and 14.9-26 rear
tires. In good to very good condition with good to very good tires. (Meter
Reads 0,538 Hours) |
| 13 |
$4,000.00 |
GOOSEN Bale Chopper, with rotating chute, 3-point/PTO |
| 14 |
$1,500.00 |
YORK Model SB, 8' Stone Rake, with 6' scarifier and 8' back grade blade, 3-point hitch, transport wheels |
| 15 |
$19,000.00 |
CATERPILLAR Model V60B, 6,000 lb Pneumatic Tired Forklift, s/n 52J438, powered by diesel engine and
hydrostatic transmission, equipped with 156" 2-stage mast (103"
retracted height), side shift, 42" forks, and FOPS canopy. In good
condition in good tires. (Meter Reads 01,254 Hours) (Reserved For Use During Loadout Thru Thursday, August 4, 2022 at
12:00 Noon) |
| 16 |
$62,000.00 |
2006 LULL Model 944E-42, 9,000 lb Telescopic Rough Terrain Forklift, s/n 0160016861, powered by Cummins QSB4.5
diesel engine and powershift transmission, equipped with 42' lift height,
3-section telescopic boom, 48" forks, fork rotation, manual coupler,
enclosed cab with heat and air conditioning, and 15.5-25 foam filled tires.
In good to very good condition with good tires. (Meter Reads 01,813 Hours)
(Reserved For Use During Loadout Thru Thursday,
August 4, 2022 at 12:00 Noon) |
| 17 |
$2,000.00 |
UNUSED GAR-BRO 1/2 Cubic Yard Concrete Bucket, with hydraulic
gate (Lull) |
| 18 |
$3,000.00 |
UNUSED 10' Boom, with hydraulic winch, 2,000 lb capacity (Lull) |
| 19 |
$3,500.00 |
UNUSED 96" General Purpose Bucket (Lull) |
| 20 |
$2,250.00 |
48" Block Fork Attachment, with hydraulic tilt (Lull) |
| 21 |
$2,750.00 |
UNUSED 48" Fork Attachment, with hydraulic fork positioner
(Lull) |
| 22 |
$2,100.00 |
WESCO JibRig Extendable Forklift Boom |
| 23 |
$1,600.00 |
48" x 72" Man Basket, with fork pockets |
| 24 |
$85,000.00 |
2006 JLG Model 800AJ, 80', 4x4 Aerial Lift, s/n 0300098473,
powered by Cat diesel engine, equipped with articulated boom, 36"x8',
500 lb capacity man/material basket, Sky Power
package to include: Miller CST280, 280 amp stick welder, Miller Spectrum 375
DC plasma cutter, Sky Air with on-board air compressor, and 445/55D19.5 foam
filled tires. In very good condition with very good tires. (Meter Reads 0,484
Hours) |
| 25 |
$42,000.00 |
2007 JLG Model 4394RT, 43', 4x4 Rough Terrain Scissor Lift, s/n
0200161561, powered by Deutz diesel engine, equipped with 84"x13'
platform with (2) 4' hydraulic extensions to 21', 1,250 lb capacity, (4) hydraulic stabilizers, and 33x15.50-16.5 foam filled tires. In
excellent condition with very good tires. (Meter Reads 0,007 Hours) |
| 26 |
$7,000.00 |
1995 SKYJACK Model SJ-3220 Electric Scissors Lift, s/n 600284,
equipped with 20' platform height, 800 lb capacity,
and 7'x30" extendable platform. In good condition. |
| 27 |
$24,000.00 |
2003 UNUSED WACKER Model RT820CC Articulated Trench Compactor,
s/n 5421147, powered by Lombardini diesel engine,
equipped with 32.5" split padfoot drums, drum cleaners,
wireless/umbilical remote. In excellent condition. (Meter Reads 0.5 Hours) |
| 28 |
$10,000.00 |
1998 UNUSED WACKER Model DPU100-70 Reversible Plate Compactor,
s/n 1126496, powered by Lombardini 2 cylinder diesel engine, equipped with 39" width
plate. |
| 29 |
$6,250.00 |
1998 WACKER Model DPU7060 Reversible Plate Compactor, s/n
1126484, powered by Farymann diesel engine,
equipped with 30" width plate and variable vibration. In very good
condition. |
| 30 |
$2,500.00 |
WACKER Model RSS800A Single Drum Walk Behind Roller, s/n
658201335, powered by Honda 11HP gas engine and hydrostatic transmission,
equipped with 28.5" smooth drum, tailgate bracket, (2) stabilization
rollers, and electric start. In very good condition. |
| 31 |
$750.00 |
WACKER Model W75 Double Drum Walk Behind Roller, s/n 291900316,
powered by 1 cylinder diesel engine and hydrostatic transmission, equipped
with 29.5" smooth drums, water system, and manual crank start. In good
condition. |
| 32 |
$5,250.00 |
1995 WACKER Model RD880V Vibratory Roller, s/n 673602591,
powered by B&S Vanguard 16HP V-twin gas engine and hydrostatic transmission,
equipped with 35.5" smooth drums and front and rear drum spray. In very
good condition. (Meter Reads 0,238 Hours) |
| 33 |
$37,000.00 |
1997 CATERPILLAR Model CB-434C Tandem Vibratory Roller, s/n
4DN00211, powered by Cat 3054 diesel engine and hydrostatic transmission,
equipped with 56" smooth drums, vibratory drum selector, front and rear
drum spray, and ROPS canopy. In very good condition. (Meter Reads 00,108
Hours) |
| 34 |
$18,000.00 |
1994 INGERSOLL RAND Model DD-90 Tandem Vibratory Roller, s/n 6343,
powered by Cummins diesel engine and hydrostatic transmission, equipped with
66" smooth drums, dual frequency vibration, vibratory drum selector, and
front and rear drum spray. In good condition. (Meter Reads 00,162 Hours) |
| 35 |
$13,500.00 |
1997 INGERSOLL RAND Model DD-32 Tandem Vibratory Roller, s/n
149637, powered by Deutz diesel engine and hydrostatic transmission, equipped
with 52" smooth drums, vibratory drum selector, front and rear drum
spray, and ROPS canopy. In good condition. (Meter Reads 0,848 Hours) |
| 36 |
$13,000.00 |
1994 INGERSOLL RAND Model DD-24 Tandem Vibratory Roller, s/n
6784, powered by Deutz diesel engine and hydrostatic transmission, equipped
with 47" smooth drums, vibratory drum selector, and ROPS canopy. In good
condition. (Meter Reads 1,229 Hours) |
| 37 |
$27,500.00 |
1994 BARBER GREENE Model BG-225B Crawler Asphalt Paver, s/n
6YK00494, powered by Cat 3054T diesel engine and hydrostatic transmission,
equipped with Extend-A-Mat 8-16B, 8'-16' heated, vibratory screed, sonic
controls for auto feeder, slope and grade controls, dual operator stations,
and 14" rubber bolt-on pads. In good condition with good pads. (Meter
Reads 01,598 Hours) |
| 38 |
$15,500.00 |
1996 NEW HOLLAND Model LX885 Skid Steer Loader, s/n 898604,
powered by New Holland diesel engine and hydrostatic transmission, equipped
with 72" general purpose loader bucket, Super Boom, manual coupler, high
flow auxiliary hydraulics, water system with roof mounted poly tank, and Air
Boss wheels with bolt-on rubber segments. In good to very good condition with
good tires. (Meter Reads 0,814 Hours) |
| 39 |
$5,500.00 |
ALITEC Model CP16A, 16" Cold Planer Attachment, s/n
310580590 (Skid Steer) |
| 40 |
$7,500.00 |
UNUSED BRADCO Model 100981 Stump Grinder Attachment, s/n 208039
(Skid Steer) |
| 41 |
$8,500.00 |
QUICK ATTACH 6' Hydraulic Brush Cutter Attachment, s/n 1075210
(Skid Steer) |
| 42 |
$6,000.00 |
ALITEC Model RW18, 48" Rock Saw Attachment, s/n 61700596,
with hydraulic positioner and 18" dig depth (Skid Steer) |
| 43 |
$4,000.00 |
UNUSED QUICK ATTACH 84" Root Rake Attachment, with grapple
(Skid Steer) |
| 44 |
$5,500.00 |
UNUSED QUICK ATTACH 84" Skeletal Bucket Attachment, with
grapple (Skid Steer) |
| 45 |
$550.00 |
(2) Water Systems (One With Electric
Pump) (Skid Steer) |
| 46 |
$23,500.00 |
1996 KUBOTA Model KX101 Mini Hydraulic Excavator, s/n 12170,
powered by Kubota diesel engine, equipped with 5'3" dipper stick, swing
boom, 18" digging bucket, auxiliary hydraulics, 60" backfill blade,
pattern changer, enclosed ROPS cab, and rubber tracks. In good condition with
good tracks. (Meter Reads 0,570 Hours) (No Glass in Cab) |
| 47 |
$3,250.00 |
KUBOTA Model KXB500N Hydraulic Hammer, s/n K5010194, with (7)
points (Kubota Mini) |
| 48 |
$4,250.00 |
MCMILLEN Hydraulic Auger, with 30", 12", and 8"
augers (Kubota KX101) |
| 49 |
$39,500.00 |
1995 INGERSOLL RAND Model SD-70D Vibratory Compactor, s/n
143775, powered by Cummins 4BT3.9-C diesel engine and hydrostatic
transmission, equipped with 66" smooth drum, variable speed vibration,
ROPS canopy, and 14.9-24 tires. In good to very good condition with good
tires. (Meter Reads 00,764 Hours) |
| 50 |
$40,000.00 |
1986 INGERSOLL RAND Model SD-100D Vibratory Compactor, s/n
5084S, powered by Cummins 4BTA-3.9 diesel engine and hydrostatic
transmission, equipped with 84" smooth drum, variable speed vibration,
ROPS canopy, and 23.1-26 tires. In good to very good condition with good to
very good tires. (Meter Reads 01,524 Hours) |
| 51 |
$87,500.00 |
2005 CATERPILLAR Model 430D IT, 4x4 Tractor Loader Backhoe, s/n
BML05169, powered by Cat 3054 diesel engine and shuttle transmission,
equipped with general purpose loader bucket with bolt-on cutting edge,
hydraulic coupler, front auxiliary hydraulics, 24" digging bucket, rear
auxiliary hydraulics, backhoe pilot controls with pattern changer, Lincoln
auto lube system, enclosed ROPS cab with air conditioning, 340/80R18 front
and 19.5L-24 rear tires. In excellent condition with excellent tires. (Meter
Reads 0,070 Hours) |
| 52 |
$20,000.00 |
1995 JOHN DEERE Model 410D, 4x4 Tractor Loader Extend-A-Hoe, s/n
814228, powered by JD diesel engine and shuttle transmission, equipped with
general purpose loader bucket with bolt-on cutting edge, 24" digging
bucket, 2-stick backhoe controls, enclosed ROPS cab, 14-17.5 front and
18.4-28 rear tires. In good condition with good tires. (Meter Reads 5,804
Hours) |
| 53 |
$16,000.00 |
1995 JOHN DEERE Model 410D, 4x4 Tractor Loader Extend-A-Hoe, s/n
809076, powered by JD diesel engine and shuttle transmission, equipped with
general purpose loader bucket, 24" digging bucket, 2-stick backhoe
controls, enclosed ROPS cab, 14-17.5 front and 18.4-28 rear tires. In good
condition with very good rear and fair front tires. (Meter Reads 6,497 Hours)
(No Glass in Cab) (Missing Right Side Door) |
| 54 |
$13,500.00 |
UNUSED CATERPILLAR Model H90C Hydraulic Hammer, s/n 6TZ04325,
with spare points (Cat 430) |
| 55 |
$9,000.00 |
UNUSED CATERPILLAR Model CVP40 Hydraulic Plate Compactor, s/n
CRT00593 (Cat 430) |
| 56 |
$7,500.00 |
1998 BALDERSON/HOLMS 96" Hydraulic Broom, s/n 5423, with
water spray (Cat 430) |
| 57 |
$18,000.00 |
UNUSED CATERPILLAR 1.25 Cubic Yard Left Side Hydraulic Dump
Bucket, s/n ATE00534 (Cat 430) |
| 58 |
$5,000.00 |
UNUSED CATERPILLAR 3-Section Boom (Cat 430) |
| 59 |
$3,000.00 |
UNUSED CATERPILLAR 48" Fork Attachment (Cat 430) |
| 60 |
$2,250.00 |
CATERPILLAR Rear Manual Coupler (Cat 430) |
| 61 |
$300.00 |
Hammer/Compactor Adaptor |
| 62 |
$1,750.00 |
UNUSED CAT 24" Digging Bucket (Cat 430 DIT) |
| 63 |
$1,750.00 |
UNUSED CAT 12" Digging Bucket (Cat 430 DIT) |
| 64 |
$1,750.00 |
UNUSED CAT 24" Digging Bucket (Cat 430 DIT) |
| 65 |
$850.00 |
JOHN DEERE 26" Digging Bucket (JD 410) |
| 66 |
$250.00 |
JOHN DEERE 12" Digging Bucket (JD 410) |
| 67 |
$850.00 |
JOHN DEERE 26" Digging Bucket (JD 410) |
| 68 |
$42,500.00 |
1987 CATERPILLAR Model 120G Motor Grader, s/n 87V08201, powered
by Cat 3304 diesel engine and powershift transmission, equipped with 12'
offsetable fully hydraulic moldboard, Spectra Physics laser plane control
ready (no instruments), front scarifier (no
shanks), enclosed ROPS cab, and 13.00-24 tires. In good condition with good
tires. (Meter Reads 00,424 Hours) |
| 69 |
$107,500.00 |
1998 CATERPILLAR Model 938G Rubber Tired Loader, s/n 6WS00541,
powered by Cat 3126 DITA diesel engine and powershift transmission, equipped
with Cat general purpose loader bucket with bolt-on cutting edge, Cat/Balderson hydraulic coupler, auxiliary hydraulics,
enclosed ROPS cab with heat and air conditioning, and 20.5R25 tires. In very
good condition with very good tires. (Meter Reads 2,870 Hours) |
| 70 |
$77,000.00 |
1996 CATERPILLAR Model 950F Series II Rubber Tired Loader, s/n
5SK02317, powered by Cat 3116 diesel engine and powershift transmission,
equipped with Balderson general purpose loader
bucket with bolt-on cutting edge, Balderson hydraulic coupler, front auxiliary hydraulics, enclosed ROPS cab with air
conditioning, and 23.5R25 tires. In good condition with good tires. (Meter
Reads 5,161 Hours) (Reserved For Use During Loadout
Thru Thursday, August 4, 2022 at 12:00 Noon) |
| 71 |
$1,100.00 |
BALDERSON 8' QC Dozer Blade, with Balderson mounting attachment (Cat 120) |
| 72 |
$3,500.00 |
BALDERSON Left Side Hydraulic Dump Bucket (CAT 950) |
| 73 |
$6,750.00 |
BALDERSON Left Side Hydraulic Dump Bucket (CAT 938) |
| 74 |
$2,600.00 |
BALDERSON 2-Section Boom (CAT 950) |
| 75 |
$3,350.00 |
BALDERSON 2-Section Boom (CAT 938) |
| 76 |
$8,000.00 |
BALDERSON 60" Fork Attachment (CAT 938) |
| 77 |
$9,250.00 |
BALDERSON 60" Fork Attachment (CAT 950) (Reserved For Use During Loadout Thru Thursday, August 4, 2022 at
12:00 Noon) |
| 78 |
$19,500.00 |
1969 CATERPILLAR Model 955K Crawler Loader, s/n 85J2554, powered
by Cat diesel engine and powershift transmission, equipped with general
purpose loader bucket with teeth and cutting segments, pedal steer, ROPS
canopy, and 15" TBG pads. In good condition with good undercarriage.
(Meter Reads 5,775 Hours) |
| 79 |
$22,500.00 |
1980 KOMATSU Model D31-16 Crawler Tractor, s/n 28171, powered by
diesel engine and powershift transmission, equipped with 6-way straight
blade, 3rd valve, tow hitch, ROPS canopy, and 16" SBG pads. In good to
very good condition with very good undercarriage. (Meter Reads 3,128 Hours) |
| 80 |
$85,000.00 |
2005 CATERPILLAR Model D3G XL Crawler Tractor, s/n JMH01371,
powered by Cat 3046 diesel engine and hydrostatic transmission, equipped with
6-way straight blade, tow hitch, enclosed ROPS cab with air conditioning, and
16" SBG pads. In excellent condition with excellent undercarriage.
(Meter Reads 0,025 Hours) |
| 81 |
$140,000.00 |
1997 CATERPILLAR Model D5M XL Crawler Tractor, s/n 6GN00571,
powered by Cat 3116 diesel engine and powershift transmission, equipped with
6-way straight blade, FTC controls, drawbar, enclosed ROPS cab with air
conditioning, and 22" SBG pads. In excellent condition with excellent
undercarriage. (Meter Reads 167 Hours) |
| 82 |
$305,000.00 |
2005 CATERPILLAR Model D6R XL Series II Crawler Tractor, s/n
AAX01161, powered by Cat C-9 diesel engine and powershift transmission,
equipped with semi-U blade with tilt, differential steering, rear
counterweight, drawbar, enclosed ROPS cab with air conditioning, and 24"
SBG pads. In excellent condition with excellent undercarriage. (Meter Reads
0,055 Hours) |
| 83 |
$25,000.00 |
1992 KOMATSU Model D68E-1 Crawler Tractor, s/n 01246, powered by
Cummins diesel engine and powershift transmission, equipped with straight
blade with tilt drawbar, ROPS canopy, and 24" SBG pads. In good condition
with good undercarriage. (Meter Reads 4,938 Hours) |
| 84 |
$19,500.00 |
1979 KOMATSU Model D65E-6 Crawler Tractor, s/n 32532, powered by
Cummins diesel engine and powershift transmission, equipped with straight
blade with tilt, 3rd valve, drawbar, ROPS canopy, and 24" SBG pads. In
good condition with good undercarriage. (Meter Reads 06,980 Hours) |
| 85 |
$85,000.00 |
1986 KOMATSU Model D155A-1 Crawler Tractor, s/n 28408, powered
by Komatsu diesel engine and powershift transmission, equipped with semi-U
blade with tilt, 4-barrel multi-shank ripper with (3) shanks, enclosed ROPS
cab with air conditioning, and 22" SBG pads. In good to very good
condition with good to very good undercarriage. (Meter Reads 1,543 Hours) |
| 86 |
$145,000.00 |
2004 CATERPILLAR Model 320CL Hydraulic Excavator, s/n PAB01552,
powered by Cat 3066 diesel engine, equipped with 9'6" dipper stick with
Cat hydraulic coupler, auxiliary hydraulics, Cat 48" digging bucket,
pattern changer, enclosed ROPS cab with front demolition screen and air
conditioning, and 31.5" TBG pads. In very good condition with very good
undercarriage. (Meter Reads 0,713 Hours) (Hammer Sold Separately) |
| 87 |
$160,000.00 |
1999 CATERPILLAR Model 330BL Hydraulic Excavator, s/n 6DR03515,
powered by Cat 3306B diesel engine, equipped with 11' dipper stick with JRB
hydraulic coupler, auxiliary hydraulics, Geith 56" digging bucket, stiff arm bracket, pattern changer, enclosed ROPS
cab with front demolition screen, and 33.5" TBG pads. In good to very
good condition with very good undercarriage. (Meter Reads 02,285 Hours)
(Hammer Hydraulic Circuit Working Intermittently) (Hammer Sold Separately) |
| 88 |
$135,000.00 |
1995 CATERPILLAR Model 330L Hydraulic Excavator, s/n 5YM01490,
powered by Cat 3306B diesel engine, equipped with 10'8" dipper stick with
JRB hydraulic coupler, Geith 54" digging
bucket, stiff arm bracket, enclosed ROPS cab with front demolition screen,
and 33.5" TBG pads. In good condition with good undercarriage. (Meter
Reads 05,474 Hours) |
| 89 |
$32,500.00 |
CATERPILLAR Model H130S Hydraulic Hammer, s/n 7CM04141 (Cat
320CL) |
| 90 |
$23,500.00 |
CATERPILLAR Model H140S Hydraulic Hammer, s/n 4SL00350 (Cat
330BL) |
| 91 |
$8,000.00 |
UNUSED CATERPILLAR Model CVP110 Hydraulic Plate Compactor, s/n
CTZ00193 (Cat 320CL) |
| 92 |
$475.00 |
TRAMAC Model 400S Hydraulic Hammer |
| 93 |
$900.00 |
(4) Hammer Points (Cat H140) |
| 94 |
$2,500.00 |
(3) Hammer Points (Cat H130) |
| 95 |
$15,000.00 |
JRB 5-Tine Grapple (Cat 330) |
| 96 |
$22,000.00 |
LEMAC Pulverizer (Cat 330) |
| 97 |
$7,000.00 |
UNUSED CATERPILLAR 24" QC Digging Bucket (Cat 320) |
| 98 |
$7,000.00 |
CATERPILLAR 30" QC Digging Bucket (Cat 330) |
| 99 |
$7,000.00 |
GEITH 36" QC Digging Bucket (Cat 330) |
| 100 |
$83,000.00 |
1998 MACK Model CL713 Tandem Axle Truck Tractor, VIN#
1M2AD62Y1WW005496, powered by Mack E7-454 diesel engine and Maxitorque T2180, 18 speed transmission, equipped with
58,000 lb rears, 20,000 lb front axle, wetline system, double frame,
stationary 5th wheel, Merritt aluminum headache rack with rigging boxes,
camelback suspension, 2-stage engine brake, twin aluminum fuel tanks, air
ride cab, cruise control, air conditioning, and 12.00R24 tires. In very good
condition with very good tires. (Odometer Reads 038,149 Miles) (Meter Reads
02,013 Hours) (Unit #44) |
| 101 |
$32,000.00 |
1997 ROGERS Model SPCR50PL98/54/24/102/3XSP, 50-Ton Tri-Axle
Lowboy Trailer, VIN# 1RBH50304VAR22850, equipped with non-ground bearing
hydraulic detachable gooseneck, 24'x102" load deck, 10'6" deck over
wheels, spring/beam suspension, outriggers, chain dogs, and 255/70R22.5
tires. In good condition with very good tires. (Spare Deck Planks) |
| 102 |
$76,000.00 |
1999 MACK Model CL713 Tandem Axle Dump Truck, VIN#
1M2AD62C5XW007452, powered by Mack E7-460, 460HP diesel engine and Maxitorque T2180, 18 speed transmission, equipped with
58,000 lb rears, 20,000 lb front axle, Bristol Donald 15' heated steel dump body with (4) 10 ton hoist
cylinders and subframe, power tarp, air gate, 2-stage engine brake, power
divider, camelback suspension, air ride cab and seat, cruise control, air
conditioning, and 12.00R24 tires. In very good condition with good tires.
(Odometer Reads 057,944 Miles) (Meter Reads 04,391 Hours) (Unit #46) |
| 103 |
$77,000.00 |
1999 MACK Model CL713 Tandem Axle Dump Truck, VIN#
1M2AD62C7XW007453, powered by Mack E7-460, 460HP diesel engine and Maxitorque T2180, 18 speed transmission, equipped with
58,000 lb rears, 20,000 lb front axle, Bristol Donald 15' heated steel dump body with (4) 10 ton hoist
cylinders and subframe, power tarp, air gate, 2-stage engine brake, power
divider, camelback suspension, air ride cab and seat, cruise control, air
conditioning, and 12.00R24 tires. In very good condition with good tires.
(Odometer Reads 047,093 Miles) (Meter Reads 03,982 Hours) (Unit #47) |
| 104 |
$46,000.00 |
2001 FORD Model F-750XLT Super Duty Single Axle Dump Truck, VIN#
3FDXF75RX1MA58706, powered by Cat 3126, 7.2L diesel engine and 7 speed
transmission, equipped with Thiele 10' steel dump body with single chute and
electric tarp, 21,000 lb rear axle, 12,000 lb front axle, spring suspension, tow package with air,
air brakes, 33,000 lb GVWR, cruise control, air
conditioning, and 11R22.5 tires. In good to very good condition with good
tires. (Odometer Reads 031,360 Miles) (Unit #50) |
| 105 |
$6,750.00 |
1989 FORD Model F-800 Single Axle Dump Truck, VIN#
1FDXK84A2KVA31441, powered by Ford 210HP diesel engine and 5 speed
transmission with 2 speed rear, equipped with 10' steel dump body with single
chute and power tarp, air brakes, tow package with air, spring suspension,
and 11R22.5 tires. In good condition with good tires. (Odometer Reads 173,697
Miles) (Unit #38) |
| 106 |
$10,000.00 |
1997 FORD Model F-350XL, 4x4 Single Axle Dump Truck, VIN#
1FDKF38F9VED04144, powered by Powerstroke 7.3L
diesel engine and automatic transmission, equipped with Heil 8' steel
landscape dump body with manual tarp, Western 8'6" plow package, Hi-Way
Super P-8 stainless steel V-box salt spreader with gas engine and cab
controls, dual rear wheels, and 235/85R16 tires. In good condition with very
good front and good rear tires. (Odometer Reads 70,139 Miles) (Fender and Bed
Rust) (Unit #52) |
| 107 |
$42,000.00 |
1997 FORD Model F-800 Single Axle Water Truck, VIN#
1FDPF80C2VVA01016, powered by Cummins B5.9-175, 175HP diesel engine and 6
speed transmission, equipped with 2,000 gallon steel
water body with rear, side, and front cable controlled spray heads, rear hose
reel, electric/hydraulic brakes, 30,000 lb GVWR,
and 11R22.5 tires. In good condition with very good tires. (Odometer Reads
003,081 Miles) (Meter Reads 1,051 Hours) (Unit #49) |
| 108 |
$20,000.00 |
2004 FORD Model F-350XL SD, 4x4 Crew Cab Utility Truck, VIN#
1FDWW37P74EB22064, powered by Powerstroke 6.0L
diesel engine and automatic transmission, equipped with Reading 9' enclosed
walk-in utility body, 100 gallon fuel tank with 12
volt pump, tow package, dual rear wheels, running boards, and 235/85R16
tires. In good to very good condition with very good tires. (Odometer Reads
020,286 Miles) (No Power Equipment or AC) (Unit #55) |
| 109 |
$27,000.00 |
2006 FORD Model F-550XLT SD 4x4 Crew Cab Utility Truck, VIN#
1FDAW57P66EA85131, powered by Power Stroke 6.0L diesel engine and automatic
transmission, equipped with Reading 9' enclosed walk-in utility body, 100 gallon fuel tank with 12 volt pump, dual rear wheels,
tow package, running boards, power windows and locks, cruise control, air
conditioning, and 225/70R19.5 tires. In good condition with good tires.
(Odometer Reads 063,360 Miles) (Unit #58) |
| 110 |
$10,000.00 |
2006 FORD Model F-550XLT SD, 4x4 Utility Truck, VIN#
1FDAF57P16EA01331, powered by Powerstroke 6.0L
diesel engine and automatic transmission, equipped with Reading 11' enclosed
walk-in utility body, 100 gallon fuel tank with 12
volt pump, dual rear wheels, tow package, running boards, power windows and
locks, cruise control, air conditioning, and 255/70R19 tires. In good condition
with very good tires. (Odometer Reads 193,302 Miles) (Unit #57) |
| 111 |
$14,000.00 |
1996 FORD Model F-350XLT, 4x4 Utility Truck, VIN#
2FDKF38F3TCA42303, powered by Powerstroke 7.3L
diesel engine and automatic transmission, equipped with Reading 11' open
utility body, 100 gallon fuel tank with 12 volt
pump, Western 8'6" snow plow package, tow package, dual rear wheels,
dual fuel tanks, power windows and locks, cruise control, air conditioning,
and LT235/85R16 tires. In good condition with good tires. (Odometer Reads
103,244 Miles) (Unit #41) |
| 112 |
$6,750.00 |
1988 FORD Model F-350, 4x4 Flatbed/Fuel Truck, VIN#
1FDKF38M9JNB53167, powered by V-8 diesel engine and 5 speed transmission,
equipped with Reading 12'6" steel flatbed, 350 gallon steel fuel tank with PTO pump and (2) hoses, Chelsea PTO, dual rear wheels,
tow package, and LT235/85R16 tires. In good condition with good tires.
(Odometer Reads 137,140 Miles) (Unit #34) |
| 113 |
$21,000.00 |
1988 FORD Model F-800 Single Axle Fuel Truck, VIN#
1FDXK84A6JVA24054, powered by Ford model 185F, 7.8L, 185HP diesel engine and
5 speed transmission with 2 speed rear, equipped with Oilmans 1,800 gallon steel 2-compartment fuel tank
(1,000/800 gallon) (2) hose reels and meters, air hose reel, air brakes,
30,000 lb GVWR, and 11R22.5 tires. In good to very
good condition with good to very good tires. (Odometer Reads 049,316 Miles)
(Full 1,000 Gallon Compartment and Partial 800 Gallon Compartment - On-Road
Diesel Fuel Purchased March 2022) (Unit #48) |
| 114 |
$0.00 |
6,000 gallons of On-Road diesel fuel. Fuel was polished June 8,
2022 - contact auction company for Final Fuel Analysis Report. Diesel fuel
and storage tank will be offered individually and as an entirety. Buyer(s)
will be responsible for fuel transportation and tank removal. |
| 115 |
$0.00 |
1997 ARMOR CAST 6,000 Gallon Concrete Encased Steel Above Ground
Fuel Tank, with steel access stairway, full (6,000 gallon) on-road diesel
fuel (sold separately). Tank dimensions 18'6" L x 9'10" W x
9'11" H, approximate empty weight = 33.9 ton. Armor Cast engineer
drawings available - contact auction company. Diesel fuel and storage tank
will be offered individually and as an entirety. Buyer responsible for tank
removal. Local contractor available for loading - call auction company for
contact information. |
| 116 |
$14,500.00 |
Entirety of Lot 114 and Lot 115 (Storage Tank and Diesel Fuel)
Individual Bids Will Be Added Together and Increased by 10% to Open The Entirety Bidding |
| 117 |
$2,500.00 |
1,000 Gallon Fuel Tank, with containment and electric pump |
| 118 |
$21,000.00 |
2005 EAGER BEAVER Model 20XPT, 20 Ton Tandem Axle Tag-A-Long
Trailer, VIN# 112H8V3275L069895, equipped with 8'6"x21' level deck, 6'
beavertail, 6' ramps, ABS, air brakes, chain dogs, 48,380 lb GVWR, and 215/75R17.5 tires. In good to very good condition with good tires. |
| 119 |
$625.00 |
Chains and Binders |
| 120 |
$400.00 |
Chains and Binders |
| 121 |
$350.00 |
Straps, Bungee Cords, and Trucking Accessories |
| 122 |
$5,000.00 |
1995 TOWMASTER Tandem Axle Tilt Deck Tag-A-Long Trailer, VIN#
4KNTT1428SL160402, equipped with 73"x14' deck, chain dogs, and 9.50-16.5
tires. In very good condition with good tires. (No VIN Plate) |
| 123 |
$750.00 |
2000 PARKER Single Axle Tag-A-Long Trailer, VIN#
13ZLS0918Y1003263, equipped with 54"x9' level deck, 36" mesh ramp,
1,560 lb GVWR, and 4.80-12 tires. In good condition
with good tires. (No Title) |
| 124 |
$3,000.00 |
1987 HAULMARK Model K716, 16'x7' Tandem Axle Enclosed Utility
Trailer, VIN# 8198, equipped with wood shelving, 4' rear access door, curbside
door, spring suspension, and F78-15 tires. In fair condition with fair tires.
(No ID Plate) (No Title) |
| 125 |
$5,500.00 |
28'x8' Single Axle Office/Storage Trailer, equipped with roll-up
door, office area with plan table and file cabinets, fluorescent lights,
baseboard heat, and air conditioning. In fair to good condition. (No Title) |
| 126 |
$5,500.00 |
28'x8' Single Axle Office/Storage Trailer, equipped with roll-up
door, office area with plan table and file cabinets, fluorescent lights,
baseboard heat, and air conditioning. In fair to good condition. (No Title) |
| 127 |
$3,750.00 |
28'x8' Single Axle Office/Storage Trailers, equipped with
roll-up door, office area with plan table and file cabinets, fluorescent
lights, baseboard heat, and air conditioning. In fair to good condition. (No
Title) |
| 128 |
$3,000.00 |
(2) 10' x 6' x 1/2" Road Plate |
| 129 |
$3,000.00 |
(3) 9' x 6' x 1" Road Plate |
| 130 |
$1,100.00 |
(2) 7'6" x 5' x 5/8" Road Plate |
| 131 |
$1,400.00 |
(2) 5' x 4' x 3/4" Road Plate |
| 132 |
$7,000.00 |
GME 16'x6'x4" Double Wall Trench Box, s/n M01101795, with
(4) 48" and (4) 42" spreaders |
| 133 |
$8,000.00 |
2000 GME 20'x6'x8" Double Wall Trench Box, s/n 9902307,
with 8' and 5' spreaders |
| 134 |
$8,000.00 |
GME 20'x6x8" Double Wall Trench Box, with 5' spreaders |
| 135 |
$2,000.00 |
8' Spreaders |
| 136 |
$375.00 |
Spreader Pins and Lifter |
| 137 |
$4,000.00 |
500 Gallon Fuel Tank, with containment and electric pump |
| 138 |
$4,000.00 |
500 Gallon Fuel Tank, with containment and electric pump |
| 139 |
$450.00 |
34" x 64" x 37" Fuel Tank, with electric pump |
| 139A |
$100.00 |
260 Gallon Steel Tank, with manual pump, 54" L x 34" D
x 32" H (Waste Oil Tank) |
| 140 |
$450.00 |
400 Gallon Water Tank |
| 141 |
$425.00 |
Water Tank |
| 142 |
$550.00 |
750 Gallon Water Tank |
| 143 |
$600.00 |
UNUSED (4) DICO 12-16.5 NHS Tires, with rims (New Holland LX885) |
| 144 |
$2,800.00 |
UNUSED (2) GOODYEAR 19.5L-24 Tires, with rims |
| 145 |
$1,250.00 |
UNUSED (2) FIRESTONE 18.4-28 Tires, with rims |
| 146 |
$1,600.00 |
UNUSED (2) GOODYEAR 340/80R18 Tires, with rims |
| 147 |
$100.00 |
UNUSED (2) FIRESTONE 14-17.5 NHS Tires, with rims |
| 148 |
$550.00 |
(1) GOODYEAR 23.1-26 Tire, with rim |
| 149 |
$3,000.00 |
(1) 23.5R25 Tire, with rim |
| 150 |
$1,100.00 |
(1) 20.5R25 Tire, with rim |
| 151 |
$3,000.00 |
(4) 12.00R24 Tires, with rims. In very good condition. (Tires
UNUSED) |
| 152 |
$3,000.00 |
(4) 12.00R24 Tires, with rims. In very good condition. (Tires
UNUSED) |
| 153 |
$2,200.00 |
(3) 12.00R24 Tires, with rims. In very good condition. (Tires
UNUSED) |
| 154 |
$1,350.00 |
UNUSED (4) 11R22.5 Tires, with rims |
| 155 |
$1,000.00 |
(2) UNUSED and (1) Used 11R22.5 Tires, with rims |
| 156 |
$900.00 |
UNUSED (2) 215/75R17.5 Tires, with rims |
| 157 |
$950.00 |
UNUSED (2) 255/70R22.5 Tires, with rims |
| 158 |
$5.00 |
(2) 6.50-10 NHS Tires, with (1) rim |
| 159 |
$10.00 |
(2) 215/75B15 Tires, (1) H78-15ST Tire,
and (1) 9.50-16.5 Tire, all with rims |
| 160 |
$400.00 |
UNUSED (4) 235/85R16 Tires, with rims |
| 161 |
$50.00 |
(6) 22.5/70R19.5 Tires, with rims. In poor condition. |
| 162 |
$50.00 |
Assorted Rims |
| 163 |
$210.00 |
CAT Parts (Cat 320CL) |
| 164 |
$1,500.00 |
CAT Bucket Teeth, Side Cutters, and Hardware (Cat 320CL) |
| 165 |
$950.00 |
Bucket Teeth, Side Cutters, and Hardware (Cat 330) |
| 166 |
$700.00 |
Cutting Edges (Cat 950F/Cat 938G) |
| 167 |
$400.00 |
Muffler and Vandalism Kit (Cat 330) |
| 168 |
$800.00 |
(2) Equipment Seats (One Fits Cat CB-434C) |
| 169 |
$325.00 |
Muffler and Exhaust (Komatsu D65/D68) |
| 169A |
$25.00 |
Side Curtains (Komatsu D65) |
| 170 |
$10.00 |
Parts (Cat V60B) |
| 171 |
$150.00 |
LASERPLANE Parts (Cat 120 Grader) |
| 172 |
$150.00 |
Muffler (Komatsu D155A) |
| 173 |
$75.00 |
Used Radiator (IR 185CFM Air Compressor), Light Bulbs (Light
Plants), and Exhaust Pipe (IR SD70) |
| 174 |
$15.00 |
Hydraulic Tank (JD 410) |
| 175 |
$700.00 |
Bucket Teeth (Cat 430DIT) |
| 176 |
$350.00 |
Parts (Hi-Way Salt Spreader) |
| 177 |
$25.00 |
Parts (Barber-Greene Paver) |
| 178 |
$225.00 |
Bumper (Mack Dump Truck) |
| 179 |
$500.00 |
(3) Hydraulic Cylinders (Dump Trucks) |
| 180 |
$110.00 |
Wheel Chalks, Rubber Mats, and Assorted Parts |
| 181 |
$750.00 |
(2) Trailer Ramps |
| 182 |
$175.00 |
Dock Ramp |
| 183 |
$750.00 |
8' Forklift Magnet |
| 184 |
$50.00 |
Wire Rope |
| 185 |
$275.00 |
Cable Spreaders |
| 186 |
$45.00 |
Shop Made Slings |
| 187 |
$275.00 |
STAHL Utility Body Doors |
| 188 |
$1.00 |
LEER 8' Fiberglass Truck Cap |
| 189 |
$1,300.00 |
Cutting Edges and Hardware (Cat D6R) (Located Inside Building) |
| 190 |
$675.00 |
Cutting Edges, End Bits, and Hardware (Komatsu D155) (Located
Inside Building) |
| 191 |
$1,400.00 |
Cutting Edges and Hardware (Komatsu D65/D68) (Located Inside
Building) |
| 192 |
$1,700.00 |
Cutting Edges, Rock Guards, and Hardware (Komatsu D31) (Located
Inside Building) |
| 193 |
$900.00 |
Cutting Edges and Hardware (Cat 430 Side Dump Bucket) (Located
Inside Building) |
| 194 |
$900.00 |
Cutting Edges and Hardware (Cat 430 General Purpose Bucket)
(Located Inside Building) |
| 195 |
$2,000.00 |
Cutting Edges and Hardware (Cat D3G) (Located Inside Building) |
| 196 |
$75.00 |
Assorted Bucket Teeth (Located Inside Building) |
| 197 |
$175.00 |
Exhaust Parts (Located Inside Building) |
| 198 |
$900.00 |
Equipment Seats and Arm Rests (Located Inside Building) |
| 200 |
$2,600.00 |
1999 HONDA Model TRX400EX Four Trax 4-Wheeler, VIN# 478TE2303XA003204, powered by Honda 400cc gas engine,
equipped with (4) spare tires with rims. In good condition. (No Title) |
| 201 |
$600.00 |
WACKER Electric Paving Breaker, with cart and steel |
| 202 |
$700.00 |
BOSCH Electric Paving Breaker, with cart and steel |
| 203 |
$1,800.00 |
WACKER VPA1350 Plate Compactor, with water tank (UNUSED in Box) |
| 204 |
$950.00 |
WACKER VPA1350 Plate Compactor, with water tank |
| 205 |
$950.00 |
WACKER VPA1350 Plate Compactor, with water tank |
| 206 |
$1,800.00 |
WACKER BS62Y Foot Compactor (UNUSED in Box) |
| 207 |
$1,600.00 |
WACKER BS62Y Foot Compactor (UNUSED in Box) |
| 208 |
$1,600.00 |
WACKER GVR151Y Foot Compactor (UNUSED in Box) |
| 209 |
$900.00 |
WACKER BS600 Foot Compactor |
| 210 |
$900.00 |
WACKER BS600 Foot Compactor |
| 211 |
$900.00 |
WACKER BS600 Foot Compactor |
| 212 |
$400.00 |
WACKER GVR151Y Foot Compactor |
| 213 |
$350.00 |
WACKER GVR151Y Foot Compactor |
| 214 |
$450.00 |
WACKER GVR151Y Foot Compactor |
| 214A |
$500.00 |
UNUSED WACKER Motor, for 62Y foot compactor |
| 214B |
$300.00 |
UNUSED WACKER Motor, for 151Y foot compactor |
| 214C |
$175.00 |
UNUSED WACKER Motor, for 500 series foot compactor |
| 215 |
$800.00 |
MAKITA DPC7301 Demo Saw (UNUSED in Box) |
| 216 |
$800.00 |
WACKER BTS1035 Demo Saw (UNUSED in Box) |
| 217 |
$850.00 |
MAKITA DPC7311 Demo Saw, with 14" diamond blade (UNUSED in
Box) |
| 218 |
$800.00 |
MAKITA DPC7321 Demo Saw, with 14" diamond blade (UNUSED in
Box) |
| 219 |
$850.00 |
MAKITA DPC7311 Demo Saw, with 14" diamond blade (UNUSED in
Box) |
| 220 |
$800.00 |
MAKITA DPC7321 Demo Saw, with 14" diamond blade (UNUSED in
Box) |
| 221 |
$800.00 |
MAKITA DPC7321 Demo Saw, with 14" diamond blade (UNUSED in
Box) |
| 222 |
$800.00 |
MAKITA DPC7311 Demo Saw, with 14" diamond blade (UNUSED in
Box) |
| 223 |
$550.00 |
STIHL TS350 Super Demo Saw |
| 224 |
$75.00 |
WACKER Demo Saw |
| 225 |
$1,800.00 |
UNUSED HUSQVARNA K40 Pneumatic Demo Saw |
| 226 |
$1,800.00 |
UNUSED HUSQVARNA K40 Pneumatic Demo Saw |
| 227 |
$550.00 |
PARTNER K30 Pneumatic Demo Saw |
| 228 |
$500.00 |
PARTNER K30 Pneumatic Demo Saw |
| 229 |
$100.00 |
HOMELITE SXL 20" Chain Saw |
| 230 |
$75.00 |
HOMELITE XL 20" Chain Saw |
| 231 |
$75.00 |
HOMELITE XL 20" Chain Saw |
| 232 |
$75.00 |
HOMELITE XL 20" Chain Saw |
| 233 |
$75.00 |
HOMELITE XL 20" Chain Saw |
| 234 |
$20.00 |
MILWAUKEE 16" Electric Chain Saw |
| 235 |
$50.00 |
HOMELITE HT-17 Gas Hedge Trimmer |
| 236 |
$950.00 |
WACKER G5.6, 5600 Watt Generator,
120/240 volt, 20/30 amp, Honda gas |
| 237 |
$225.00 |
HOMELITE 180R62, 5500 Watt Generator,
120/240 volt |
| 238 |
$350.00 |
WACKER GH3500, 3500 Watt High Cycle
Generator, 110/240 volt, 80hz, 3-phase, Wisconsin gas |
| 239 |
$350.00 |
WACKER GH3500, 3500 Watt High Cycle
Generator, 110/240 volt, 80hz, 3-phase, Wisconsin gas |
| 240 |
$500.00 |
UNUSED WACKER G2.5, 2500 Watt Generator, 120 volt, 20 amp, Honda 5.5HP gas |
| 241 |
$500.00 |
HONDA EG2200X, 2200 Watt Generator, 120
volt AC, 12 volt DC, Honda gas |
| 241A |
$375.00 |
UNUSED HONDA Motor, for 2500 generator |
| 241B |
$475.00 |
UNUSED HONDA GX-160QX2, 5.5HP Motor, with 3/4" shaft |
| 241C |
$125.00 |
Used HONDA Motor, for EG2500X generator |
| 242 |
$325.00 |
WACKER PT3, 3" Trash Pump, Wisconsin gas |
| 243 |
$325.00 |
WACKER PT2, 2" Trash Pump, B&S 5HP gas |
| 244 |
$325.00 |
WACKER PT2, 2" Trash Pump, B&S 5HP gas |
| 245 |
$1,100.00 |
WACKER PD-3A, 3" Diaphragm Pump, Honda 3.5HP gas |
| 246 |
$25.00 |
HOMELITE 2" Centrifugal Pump, B&S 3.5HP gas |
| 247 |
$25.00 |
HOMELITE 2" Centrifugal Pump, B&S 3.5HP gas |
| 248 |
$140.00 |
KENCO 3" Submersible Pump, 230 volt, 3-phase, 5HP gas |
| 249 |
$500.00 |
WACKER ESS-400, 2" Submersible Pump, with float switch |
| 250 |
$600.00 |
UNUSED WACKER PS2400, 2" Submersible Pump, 110 volt, with float switch |
| 251 |
$500.00 |
UNUSED WACKER PS2400, 2" Submersible Pump, 110 volt, with float switch |
| 252 |
$10.00 |
TEEL 1.5" Electric Centrifugal Pump and GOULDS1.5"
Electric Jet Pump |
| 253 |
$75.00 |
(2) EVERBILT 1/3H Electric Submersible Pumps (UNUSED in Box) |
| 254 |
$1,300.00 |
UNUSED INGERSOLL RAND MX90, 90 lb Paving Breaker |
| 255 |
$1,050.00 |
INGERSOLL RAND 90 lb Paving Breaker |
| 256 |
$1,050.00 |
INGERSOLL RAND 90 lb Paving Breaker |
| 257 |
$1,150.00 |
INGERSOLL RAND MX60, 60 lb Paving
Breaker (UNUSED in Box) |
| 258 |
$1,000.00 |
UNUSED INGERSOLL RAND MX60, 60 lb Paving Breaker |
| 259 |
$450.00 |
INGERSOLL RAND MX60, 60 lb Paving
Breaker |
| 260 |
$1,050.00 |
INGERSOLL RAND PB85, 85 lb Paving
Breaker |
| 261 |
$450.00 |
INGERSOLL RAND PB60, 60 lb Paving
Breaker |
| 262 |
$400.00 |
INGERSOLL RAND Pneumatic Rock Drill |
| 263 |
$400.00 |
INGERSOLL RAND Pneumatic Rock Drill |
| 264 |
$400.00 |
INGERSOLL RAND Pneumatic Rock Drill |
| 265 |
$425.00 |
INGERSOLL RAND 30 lb Paving Breaker |
| 266 |
$600.00 |
AMERICAN Pneumatic Chipping Hammer |
| 267 |
$550.00 |
AMERICAN Pneumatic Chipper Hammer, with steel |
| 268 |
$400.00 |
Breaker Steel, with tapered shank and oilers |
| 269 |
$2,600.00 |
Breaker Steel (1-1/2", 7/8", and tapered shank) |
| 270 |
$225.00 |
Drill Steel, Air Wands, and Guns |
| 271 |
$300.00 |
Pneumatic Backfill Tamper |
| 272 |
$30.00 |
Axes, Machetes, and Splitting Wedges |
| 273 |
$225.00 |
(2) HOMELITE Chain Saw Power Heads, with bars and chains |
| 274 |
$45.00 |
SNAPPER ET300 Edger and HOMELITE ST200 Trimmer, with brush blade |
| 275 |
$600.00 |
INGERSOLL RAND 280, 1" Pneumatic Impact Wrench |
| 276 |
$600.00 |
INGERSOLL RAND 281,1" Pneumatic Impact Wrench |
| 277 |
$200.00 |
CP 3/4" Pneumatic Impact Wrench |
| 278 |
$200.00 |
INGERSOLL RAND 3/4" Pneumatic Impact Wrench |
| 279 |
$75.00 |
INGERSOLL RAND 1/2" Pneumatic Impact Wrench |
| 280 |
$1,200.00 |
PROTO 3/4" to 2-1/2" Impact Socket Set (1" Drive) |
| 281 |
$1,200.00 |
S-K 21mm to 70mm Impact Socket Set (24 Piece-1" Drive) |
| 282 |
$1,050.00 |
PROTO 9/16" to 2-3/8" Impact Socket Set (35
Piece-3/4" Drive) |
| 283 |
$1,050.00 |
PROTO 17mm to 50mm Impact Socket Set (29 Piece-3/4" Drive) |
| 284 |
$950.00 |
PROTO 1-5/8" to 3-1/2" Socket Set, with breaker bars
and ratchet (15 Piece-1" Drive) |
| 285 |
$900.00 |
PROTO 7/8" to 2-3/8" Socket Set, with breaker bar, extension and ratchet (23 Piece-3/4" Drive) |
| 286 |
$900.00 |
PROTO 19mm to 60mm Socket Set, with breaker bar, extensions and ratchet (23 Piece-3/4" Drive) |
| 287 |
$125.00 |
CHINA 7/8" to 2", 3/4" Drive Socket Set |
| 288 |
$25.00 |
MILWAUKEE 1/2" Electric Impact Wrench |
| 289 |
$750.00 |
UNUSED WACKER EHB11 Hammer Drill |
| 290 |
$750.00 |
WACKER EHB11 Hammer Drill |
| 291 |
$750.00 |
UNUSED BOSCH 11263EVS Hammer Drill |
| 292 |
$500.00 |
BOSCH 11263EVS Hammer Drill |
| 293 |
$750.00 |
UNUSED BOSCH 11263EVS Hammer Drill |
| 294 |
$400.00 |
BOSCH 11263EVS Hammer Drill |
| 295 |
$750.00 |
UNUSED BOSCH 11316EVS Hammer Drill |
| 296 |
$750.00 |
UNUSED BOSCH 11316EVS Hammer Drill |
| 297 |
$550.00 |
BOSCH 1209 Hammer Drill |
| 298 |
$400.00 |
UNUSED WACKER EHB11 Hammer Drill |
| 299 |
$110.00 |
BOSCH 11305 Hammer Drill |
| 300 |
$150.00 |
BOSCH 11305 Hammer Drill |
| 301 |
$750.00 |
UNUSED BOSCH 11227E Hammer Drill |
| 302 |
$300.00 |
HILTI TE74 Hammer Drill |
| 303 |
$500.00 |
UNUSED HILTI TE25 Hammer Drill |
| 304 |
$175.00 |
HILTI TE24 Hammer Drill |
| 305 |
$150.00 |
HILTI TE24 Hammer Drill |
| 306 |
$150.00 |
HILTI TE5 Hammer Drill |
| 307 |
$150.00 |
HILTI TE5 Hammer Drill |
| 308 |
$450.00 |
UNUSED BOSCH 11224VSRC Bulldog Hammer Drill |
| 309 |
$375.00 |
UNUSED MAKITA HR2455 Hammer Drill |
| 310 |
$200.00 |
MAKITA HR2455 Hammer Drill |
| 311 |
$375.00 |
BOSCH 1194BSR Hammer Drill |
| 312 |
$475.00 |
UNUSED BOSCH Hammer Drill Steel and Bit (SDS Max Shank) |
| 313 |
$250.00 |
(8) BOSCH Hammer Drill Bits (Spline Shank) |
| 314 |
$125.00 |
MILWAUKEE 1/2" Drill |
| 315 |
$65.00 |
(2) UNUSED MILWAUKEE General Purpose Screw Drivers |
| 316 |
$85.00 |
(2) UNUSED MILWAUKEE Screw Shooters |
| 317 |
$10.00 |
MILWAUKEE General Purpose Screw Driver and (2) MILWAUKEE Screw Shooters (2 Boxes) |
| 318 |
$0.00 |
(2) MILWAUKEE Screw Shooters |
| 319 |
$125.00 |
(2) UNUSED MAKITA 3-3/8" Cordless Circular Saws |
| 320 |
$50.00 |
(2) MAKITA 3-3/8" Cordless Circular Saws |
| 321 |
$130.00 |
UNUSED MILWAUKEE 8-1/4" Worm Drive Circular Saw |
| 322 |
$160.00 |
SKIL 8-1/4" Worm Drive Circular Saw |
| 323 |
$90.00 |
SKIL 7-1/2" Worm Dive Circular Saw |
| 324 |
$25.00 |
SKIL 6-1/2" Worm Drive Circular Saw |
| 325 |
$90.00 |
SKIL 7-1/4" Worm Drive Circular Saw |
| 326 |
$120.00 |
SKIL 7-1/2" Worm Dive Circular Saw |
| 327 |
$85.00 |
MILWAUKEE Sawzall |
| 328 |
$85.00 |
MILWAUKEE Sawzall |
| 329 |
$20.00 |
MILWAUKEE Sawzall |
| 330 |
$45.00 |
UNUSED MILWAUKEE Jig Saw |
| 331 |
$5.00 |
MILWAUKEE Jig Saw |
| 332 |
$25.00 |
BOSCH Jig Saw |
| 333 |
$175.00 |
MILWAUKEE 9" Angle Grinder |
| 334 |
$150.00 |
MILWAUKEE 7" Angle Grinder |
| 335 |
$135.00 |
MILWAUKEE 7" Angle Grinder |
| 336 |
$100.00 |
UNUSED MILWAUKEE 4-1/2" Angle Grinder |
| 337 |
$90.00 |
MILWAUKEE 5" Angle Grinder |
| 338 |
$50.00 |
BOSCH 1347, 4-1/2" Angle Grinder |
| 339 |
$60.00 |
UNUSED MAKITA 4" Angle Grinder |
| 340 |
$40.00 |
MAKITA 4-1/2" Angle Grinder |
| 341 |
$40.00 |
UNUSED PORTER CABLE 4-1/2" Angle Grinder |
| 342 |
$110.00 |
UNUSED SENCO Pneumatic Finish Nailer |
| 343 |
$50.00 |
(2) SENCO Pneumatic Framing Nailers |
| 344 |
$45.00 |
Assorted Electric Tools |
| 345 |
$30.00 |
Assorted Electric Tools |
| 346 |
$175.00 |
UNUSED MILWAUKEE 14" Abrasive Chop Saw |
| 347 |
$450.00 |
(3) 30" Saw Blades |
| 348 |
$400.00 |
(5) UNUSED and (1) Used 18" Diamond Saw Blades |
| 349 |
$350.00 |
(3) UNUSED and (1) Used 16" Diamond Saw Blades |
| 350 |
$425.00 |
(9) UNUSED 12" Diamond Saw Blades |
| 351 |
$425.00 |
(10) UNUSED 12" Diamond Saw Blades |
| 352 |
$200.00 |
(4) UNUSED HILTI 12" Diamond Saw Blades |
| 353 |
$450.00 |
(61) UNUSED 12" Abrasive Saw Blade |
| 354 |
$80.00 |
(11) UNUSED MAKITA 14" Abrasive Saw Blades |
| 355 |
$100.00 |
Assorted Saw Blades |
| 356 |
$300.00 |
UNUSED FJC Master Radiator Cap Pressure Test Kit |
| 357 |
$550.00 |
UNUSED CAT 600850 Crimping Tool |
| 358 |
$125.00 |
(2) Cable Cutters |
| 359 |
$400.00 |
Battery and Electric Cable |
| 360 |
$275.00 |
Bolt Cutter and Bolt Cutter Heads |
| 361 |
$1,600.00 |
STONE MS2 Gas Powered Block Saw, 20" blade, Honda 11HP gas,
(3) spare blades |
| 362 |
$400.00 |
TARGET GM2051 Electric Masonry Saw, 16" blade, 5HP, 208-230 volt, single phase |
| 363 |
$100.00 |
TARGET Electric Masonry Saw, 12" blade, 2HP, 115/200-230 volt, single phase |
| 364 |
$100.00 |
TARGET Electric Tile Saw, 10" blade, 3/4HP, 115/230 volt |
| 365 |
$3,200.00 |
HILTI DD100M Core Drill, with accessories to include various
base plates, vacuum pump, masks, and water tank (Many Accessories UNUSED) |
| 366 |
$950.00 |
(15) UNUSED HILTI Core Bits (2 Crates) |
| 367 |
$1,200.00 |
UNUSED WACKER P35A Vibratory Screed Head, Honda 4-stroke |
| 368 |
$600.00 |
WACKER P35A Vibratory Screed Head, Honda 4-stroke |
| 369 |
$270.00 |
UNUSED HONDA GX35NT 4-Stroke Screed Motor |
| 370 |
$900.00 |
UNUSED WACKER P35A, 16' Screed Blade |
| 371 |
$500.00 |
UNUSED WACKER P35A, 14' Screed Blade |
| 372 |
$500.00 |
UNUSED WACKER P35A, 12' Screed Blade |
| 373 |
$700.00 |
UNUSED WACKER P35A, 8' Screed Blade |
| 374 |
$700.00 |
UNUSED WACKER P35A, 6' Screed Blade |
| 375 |
$175.00 |
STAMPCRETE ADA Concrete Stamps |
| 376 |
$4,250.00 |
MQ MB-25HD Rebar Bender, with dies and foot switch |
| 377 |
$200.00 |
TOLMAN Manual Rebar Cutter-Bender |
| 378 |
$1,700.00 |
UNUSED MQ HBC-25N Electro-Hydraulic Rebar Cutter, 1"
capacity and rebar epoxy grout |
| 379 |
$325.00 |
UNUSED WACKER B5000 Gas Powered Concrete Vibrator |
| 380 |
$500.00 |
UNUSED WACKER M3000 Electric Concrete Vibrator |
| 381 |
$475.00 |
UNUSED WACKER M2000 Electric Concrete Vibrator |
| 382 |
$350.00 |
WACKER M2000 Electric Concrete Vibrator |
| 383 |
$175.00 |
WACKER M2000 Electric Concrete Vibrator |
| 384 |
$75.00 |
(3) UNUSED WACKER High Cycle Concrete Vibrators |
| 385 |
$325.00 |
Concrete Vibrator Heads and Wands |
| 386 |
$21,000.00 |
MULLER C1-36 Wet Tap, 36" boring bar travel with 12",
10", 8", 6", and 4" cutter heads and IR multi-vane
pneumatic driver |
| 387 |
$2,100.00 |
UNUSED MULLER D-5 Pipe Tap |
| 388 |
$3,000.00 |
UNUSED MULLER H603 Power Drive Head |
| 389 |
$750.00 |
Assorted Water Pipe Tools |
| 390 |
$350.00 |
WHEELER 36301 Hydrostatic Test Pump, 300 PSI, B&S 5HP gas |
| 391 |
$140.00 |
GREENLEE No. 1804 Knockout Punch Set |
| 392 |
$1,600.00 |
RIDGID KOLLMANN K-1500SP Sectional Drain/Sewer Cleaner |
| 393 |
$1,700.00 |
UNUSED RIDGID K-400-T2 Sewer/Drain Cleaner, with additional 75'
1/2" cable |
| 394 |
$7,250.00 |
RIDGID 1224 Power Threader and Accessories |
| 395 |
$300.00 |
(5) UNUSED RIDGID Pipe Stands |
| 396 |
$300.00 |
(2) RIDGID Tri-Stands |
| 397 |
$225.00 |
RIDGID Manual Pipe Threader, 1/4" through 2" dies |
| 398 |
$300.00 |
UNUSED RIDGID 60" Pipe Wrench |
| 399 |
$150.00 |
UNUSED RIDGID 48" Pipe Wrench |
| 400 |
$100.00 |
UNUSED RIDGID 36" Pipe Wrench |
| 401 |
$350.00 |
(7) UNUSED RIDGID Pipe Wrenches and UNUSED RIDGID Tubing Cutter |
| 402 |
$2,400.00 |
UNUSED SPECTRA PRECISION Dialgrade 1285 Pipe Laser |
| 403 |
$1,200.00 |
SPECTRA PHYSICS Dialgrade 1250 Pipe
Laser |
| 404 |
$160.00 |
UNUSED SPECTRA PHYSICS 945U Rotating Laser Level, with bracket
and target |
| 405 |
$175.00 |
SPECTRA PHYSICS 1110XL Rotating Laser Level |
| 406 |
$800.00 |
UNUSED SPECTRA PRECISION LL500 Rotating Laser |
| 407 |
$800.00 |
UNUSED SPECTRA PRECISION LL500 Rotating Laser |
| 408 |
$800.00 |
SPECTRA PRECISION LL500 Rotating Laser |
| 409 |
$400.00 |
SPECTRA PRECISION Laser Plane 500 Rotating Laser |
| 410 |
$650.00 |
(4) UNUSED APACHE LIGHTING Laser Detector Targets |
| 411 |
$550.00 |
UNUSED SPECTRA PHYSICS Laser Plane Dozer Blade Laser Guide |
| 412 |
$130.00 |
GEOTEC T-24 Transit |
| 413 |
$130.00 |
UNUSED THEIS Tecomat 32 Level |
| 414 |
$130.00 |
UNUSED HORIZON 2028 Level |
| 415 |
$40.00 |
KEUFFEL and ESSER Transit, with wood box |
| 416 |
$25.00 |
Laser Accessories |
| 417 |
$450.00 |
UNUSED Laser Plane Dozer Blade Mast |
| 418 |
$25.00 |
UNUSED SPECTRA PHYSICS 12' Wood Tripod |
| 419 |
$500.00 |
(4) UNUSED Tripods |
| 420 |
$20.00 |
UNUSED SPECTRA PHYSICS 852, 8' Tripod |
| 421 |
$20.00 |
UNUSED SPECTRA PHYSICS 852, 8/ Tripod |
| 422 |
$125.00 |
Grade Poles, Tripods, and Surveyor Tapes |
| 423 |
$400.00 |
UNUSED TPI 48" Shop Floor Fan |
| 424 |
$400.00 |
UNUSED PROTEMP 42" Shop Floor Fan |
| 425 |
$250.00 |
UNUSED PROTEMP 36" Shop Floor Fan |
| 426 |
$1,300.00 |
UNUSED MILWAUKEE 3/4" Magnetic Drill Press |
| 427 |
$1,000.00 |
MILWAUKEE 1/2" Magnetic Drill Press |
| 428 |
$200.00 |
BUX Magnetic Base, with IR pneumatic multi-vane |
| 429 |
$5.50 |
Drills, Bench Grinders, and Valve Seat Grinder |
| 430 |
$70.00 |
(4) Battery Chargers and Brake Bleeder |
| 431 |
$650.00 |
ASSOCIATED 6/12/18/24 Volt Battery Charger Starter and
ASSOCIATED Battery Loader Tester |
| 432 |
$375.00 |
Pneumatic Luber, with cart and (2
barrels) of lube |
| 433 |
$300.00 |
Manual Luber, with cart and (2
barrels) of lube |
| 434 |
$625.00 |
UNUSED RIDGID 12" Sliding Miter Saw, with portable stand |
| 435 |
$15.00 |
CRAFTSMAN 10" Radial Arm Saw and Compound Miter Saw |
| 436 |
$175.00 |
DAYTON 3Z99 Horizontal Band Saw |
| 437 |
$50.00 |
KELLER Horizontal Band Saw |
| 438 |
$625.00 |
KALAMAZOO Horizontal Band Saw |
| 439 |
$400.00 |
RUGER HP8, 6,000 lb Electric Hydraulic
Portable Shop Crane, with 48" extension |
| 440 |
$825.00 |
HEIN WERNER 62, 1 Ton Transmission Jack |
| 441 |
$400.00 |
UNUSED HEIN WERNER 3/4 Ton Wheel Dolly |
| 442 |
$150.00 |
LINCOLN 2-Ton Floor Jack |
| 443 |
$275.00 |
LINCOLN 4-Ton Floor Jack |
| 444 |
$625.00 |
HEIN WERNER 20-Ton Floor Jack |
| 445 |
$200.00 |
(8) Jack Stands |
| 446 |
$350.00 |
(4) HEIN WERNER 10-Ton Jack Stands |
| 447 |
$175.00 |
(4) Railroad Jacks |
| 448 |
$325.00 |
(5) Bottle Jacks |
| 449 |
$325.00 |
(5) Bottle Jacks |
| 450 |
$75.00 |
Bottle Cart and Oxygen/Acetylene Hose |
| 451 |
$75.00 |
Bottle Cart and Oxygen/Acetylene Hose |
| 452 |
$750.00 |
(3) UNUSED Cutting Torches |
| 453 |
$225.00 |
Oxygen/Acetylene Gauges, Hose, and Cutting Torches |
| 454 |
$230.00 |
(2) SMITH Hand Torch Outfits |
| 455 |
$450.00 |
ALC Sandblast Pot and Accessories |
| 456 |
$550.00 |
NORTH STAR Cold Pressure Washer, Honda 13HP |
| 457 |
$550.00 |
KARCHER HDS120S, 2175PSI @ 5GPM Steam Cleaner, 460 volt, 3-phase |
| 458 |
$1,900.00 |
GARDNER DENVER PL30, 2-Stage, 15HP Horizontal Shop Air Compressor,
460 volt, 3-phase |
| 459 |
$18,750.00 |
AEROQUIP Pro Crimp 1340 Hydraulic Hose Repair Station to
Include: crimping dies, fittings, Milwaukee chop saw, hydraulic hose bench
with vise, and shelving unit with (2) lights (BUYER MUST LOAD Fittings and
Light Fixtures) |
| 460 |
$10,500.00 |
OTC MASTER Pulling Set ? 17.5/30/50 Ton
Complete with hydraulic rams, pullers, bearing splitters, manual pumps, etc.,
mounted on (2) wood panels |
| 461 |
$2,750.00 |
OTC Truck Wheel Bearing Locknut 6 PT and 8 PT Sockets |
| 462 |
$1,050.00 |
Seal Driver Kit, mounted on wood board |
| 463 |
$3,400.00 |
KWIK-WAY 75 Ton Shop Press, with electric hydraulic power pack |
| 464 |
$225.00 |
CRAFTSMAN 20" Pedestal Drill Press |
| 465 |
$8,250.00 |
CONTRX 5-Ton Rolling Shop Gantry, with Coffing 1/2 ton electric hoist, 5-ton chain fall, 12' span, and
adjustable height |
| 466 |
$3,500.00 |
MILLER DELTAWELD 650 Amp Welding Power Source, with Millermatic S-54D wire feed unit, Miller MPG-395B arc
welding unit, leads, connecting cords, and gas hose |
| 467 |
$3,500.00 |
UNUSED MILLERMATIC 251 Mig Welder, 230/460
volt, single phase |
| 468 |
$2,000.00 |
MILLER Spectrum 701 Plasma Cutter, with gun and air hose, 460
volt, 3-phase |
| 469 |
$3,250.00 |
UNUSED MILLER Spectrum 2050 DC Plasma Cutting System, with
auto-line, gun, and air hose |
| 470 |
$750.00 |
(5 Spools) .035" Welding Wire |
| 471 |
$210.00 |
(3 Spools) 1/16" Welding Wire |
| 472 |
$325.00 |
(2 Spools) MCKAY 1/16" Hard Facing Welding Wire |
| 473 |
$65.00 |
TWECO 1/16" Mig Gun |
| 474 |
$80.00 |
Welding Hood, Leathers, Bracing Rods, and Accessories |
| 475 |
$275.00 |
60"x31" Welding Table |
| 475A |
$250.00 |
C-Clamps and Welding Clamps |
| 476 |
$375.00 |
MILWAUKEE Dual Wheel Pedestal Grinder |
| 477 |
$425.00 |
MILWAUKEE Dual Wheel Pedestal Grinder |
| 478 |
$175.00 |
HILTI DXA41 Powder Actuated Fastener |
| 479 |
$75.00 |
HILTI DX451 Powder Actuated Fastener |
| 480 |
$20.00 |
(3) UNUSED REMINGTON Powder Actuated Fasteners |
| 481 |
$10.00 |
(2) REMINGTON and (1) STAR Powder Actuated Fasteners |
| 482 |
$475.00 |
HILTI and REMINGTON Fasteners, Charges, Accessories, and (2)
Cabinets (BUYER MUST LOADS) |
| 483 |
$650.00 |
Metal Work Bench, with vise, drill press, and light (BUYER MUST
LOAD) |
| 484 |
$400.00 |
Pintle and Ball Hitches |
| 485 |
$350.00 |
Hammers and Pin Drivers |
| 486 |
$475.00 |
HANDI-KLEEN Electric Parts Washer, with aeration system (Emptied
and Cleaned) |
| 487 |
$950.00 |
PROTO AND WILLIAMS 1-1/4" to 2-1/2" 20 Piece
Combination Wrench Set |
| 488 |
$450.00 |
PROTO 29mm to 50mm 7 Piece Combination Wrench Set |
| 489 |
$575.00 |
(11) Spanner Wrenches |
| 490 |
$50.00 |
Oil Pans, Oil Cans, and Funnels |
| 491 |
$625.00 |
Metal Work Bench, with vise and light (BUYER MUST LOAD) |
| 492 |
$75.00 |
MILWAUKEE Sawzall, with tripod |
| 493 |
$300.00 |
(6) RIDGID Pipe Wrenches and Cable Cutter and Crimper |
| 494 |
$425.00 |
(4) Shelving Units and Contents |
| 495 |
$250.00 |
Steel Plates and Steel Pins (In Corner) |
| 496 |
$625.00 |
(2) Floor Polishers |
| 497 |
$150.00 |
Chain Hoist, Cable Come-A-Long, Crowbars, and Saws |
| 498 |
$150.00 |
Sledge Hammers and Wood Handles |
| 499 |
$150.00 |
Bar Clamps |
| 500 |
$175.00 |
Paint Guns and Masking Paper Dispenser |
| 501 |
$400.00 |
Banding Cart with 1-1/4" banding material, tools, and
clips, (4) additional rolls of banding material and clips |
| 502 |
$700.00 |
Banding Cart with 1/2" banding material, clips, and tools,
(3) additional rolls of banding material and clips |
| 503 |
$125.00 |
Chain Binders, Spud Wrenches, Hooks, Shackles, and Car Ramps (On
Floor) |
| 504 |
$250.00 |
Cabinet and Contents |
| 505 |
$500.00 |
(4 Sections) Pallet Racking with loft lights and remaining
contents (BUYER MUST LOAD) |
| 506 |
$175.00 |
(6) Stackable Cabinets, with glass doors |
| 507 |
$1,000.00 |
(6) Metal Shelving Units and Contents (BUYER MUST LOAD) |
| 508 |
$1,900.00 |
(6) Metal Shelving Units and Contents of Fittings (BUYER MUST
LOAD) |
| 509 |
$1,000.00 |
(3) Metal Shelving Units and Contents of Hardware and Small
Engine Parts (BUYER MUST LOAD) |
| 510 |
$225.00 |
BANNER 10-Ton Porta Power and Accessories |
| 511 |
$475.00 |
(3) Shelving Units and Contents (BUYER MUST LOAD) |
| 512 |
$325.00 |
HILTI Cabinet with batter parts, grinding wheels, and saw blades |
| 513 |
$325.00 |
Bolt Bins and Contents (BUYER MUST LOAD) |
| 514 |
$950.00 |
(4) Bolt Bins with contents and all thread (BUYER MUST LOAD) |
| 515 |
$400.00 |
LENOX Hole Saw Bits |
| 516 |
$650.00 |
HILTI and WACKER Hammer Drill Bits |
| 517 |
$225.00 |
BOSCH Hammer Drill Chisel Steel |
| 518 |
$500.00 |
Core Drill Bits |
| 519 |
$200.00 |
(3) Metal Shelves and (2) Stackable Cabinets, with glass doors |
| 520 |
$2,300.00 |
(100+/-) Wire Rope Slings (Hanging On Wall) (Most UNUSED With Capacity Tags) |
| 521 |
$450.00 |
Tire Tools and Bead Sealer |
| 522 |
$325.00 |
(2) 55 Gallon Drums SAE10 diesel engine oil (One Drum Full and
One Drum Half Full) and half drum of kerosene |
| 523 |
$950.00 |
55 Gallon Drum 15W40 oil, 55 gallon drum AW46 hydraulic oil |
| 524 |
$1,400.00 |
(2 Shelves) Motor Oil, Antifreeze, Hydraulic Oil, Washer Fluid,
and Diesel Fuel Conditioner (BUYER MUST LOAD) |
| 525 |
$375.00 |
(2 Sections) Pallet Racking (BUYER MUST DISMANTLE AND LOAD) |
| 526 |
$2,000.00 |
Precast Lifters |
| 527 |
$1,300.00 |
Shackles |
| 528 |
$350.00 |
Railroad Rail Grab, Pallet Grab, and Storm Sewer Grate Lifters |
| 529 |
$1,100.00 |
4-Way Chain Spreader, 5' length, 18,400 lb capacity |
| 530 |
$1,100.00 |
4-Way Chain Spreader, 5' length, 18,400 lb capacity |
| 531 |
$1,000.00 |
4-Way Chain Spreader, 12' length, 18,400 lb capacity |
| 532 |
$800.00 |
4-Way Chain Spreader, 15' length, 18,400 lb capacity |
| 532A |
$1,000.00 |
4-Way Chain Spreader, 8' length, 18,400 lb capacity |
| 533 |
$75.00 |
Conduit Benders |
| 534 |
$500.00 |
Nylon Straps |
| 535 |
$175.00 |
GREENLEE Fish Tapes and SNAP-ON Puller |
| 536 |
$400.00 |
RIDGID Pipe, Strap, and Chain Wrenches |
| 537 |
$250.00 |
UNUSED Dial Indicators and Magnetic Bases |
| 538 |
$900.00 |
(3 Sections) Heavy Duty Pallet Racking and Remaining Contents
(BUYER MUST DISMANTLE AND LOAD) |
| 539 |
$75.00 |
Contractors Kit |
| 539A |
$225.00 |
Pinch and Pry Bars, Water Keys, and Shovels |
| 540 |
$4,200.00 |
8' Steel Stock Rack and Contents, and Steel Plate |
| 541 |
$4,400.00 |
20' Steel Stock Rack and Contents |
| 542 |
$900.00 |
(150+/-) 14" Abrasive Blades and (50+/-) 12" Abrasive
Blades |
| 543 |
$1,300.00 |
(9) Shelving Units and Contents of oil, fuel, and air filters
(BUYER MUST LOAD) |
| 544 |
$475.00 |
(4) Shelving Units and Contents of brake rotors, drums, and pads
(BUYER MUST LOAD) |
| 545 |
$900.00 |
(2) UNUSED MASTER 200,000 BTU Space Heaters |
| 546 |
$650.00 |
(2) DAYTON 90,000 BTU Space Heaters |
| 547 |
$75.00 |
(2) Shop Vacs, with hose |
| 548 |
$100.00 |
Spreader Beams, Pipe Stands, and Pin Pullers |
| 549 |
$25.00 |
Garage Floor Epoxy, Hard Hats and Liners, and Spackling Tools |
| 550 |
$300.00 |
(2) Transformers, Electric Motors, Braker Panels, and Power
Cords |
| 551 |
$2,000.00 |
(39 Cases) Diesel Fuel Conditioner |
| 552 |
$450.00 |
UNUSED and Used Power Cords |
| 553 |
$50.00 |
Work Lights, Temporary Lighting, and Flood Lights |
| 554 |
$125.00 |
Fuel Pumps and Hoses |
| 555 |
$150.00 |
Barrel Pumps and Barrel Cart |
| 556 |
$100.00 |
WESTCO Pallet Jack |
| 557 |
$25.00 |
Fire Extinguishers and Pump Sprayers |
| 558 |
$50.00 |
Fans and Heaters |
| 559 |
$50.00 |
(3 Pallets) Nails and Hardware |
| 560 |
$1,700.00 |
(7 Sections) Pallet Racking (BUYER MUST LOAD) |
| 561 |
$65.00 |
Microwave and Refrigerator |
| 562 |
$475.00 |
(3) Shelving Units and Contents (BUYER MUST LOAD) |
| 563 |
$1.00 |
Belt Driven Air Compressor (No Tank - Condition Unknown) |
| 564 |
$125.00 |
(2) Wood Work Tables and Vises |
| 565 |
$2,600.00 |
(2) MULLER Gate Valves, Ductile Iron Megalugs,
Tees, Bends, Gaskets, Fittings, and Hardware (Located in Container Lot #682)
(BUYER MUST LOAD) |
| 566 |
$4,250.00 |
UNUSED and Used 3/4" to 2" Copper Tubing (Located In Container Lot #682) (BUYER MUST LOAD) |
| 567 |
$1,100.00 |
(6 Rolls) Copper Flashing (Located In Container Lot #682) |
| 568 |
$400.00 |
Form Hardware Including Snap Ties, Screed Holders, Tie Wire
(Contents of Pallet Rack ? Located in Container Lot #655) (BUYER MUST
LOAD) |
| 569 |
$25.00 |
Sheet Rock Corner Bead, J-Trim, and Gas Vents (Located in
Container Lot #655) (BUYER MUST LOAD) |
| 570 |
$875.00 |
PVC Fittings and Backer Rod (Located in Container Lot #656)
(BUYER MUST LOAD) |
| 571 |
$1,900.00 |
Tarps and 6 Mill Plastic Sheeting (Located in Container Lot
#656) (BUYER MUST LOAD) |
| 572 |
$475.00 |
Concrete Blankets and Insulation (Located in Container Lot #657)
(BUYER MUST LOAD) |
| 573 |
$625.00 |
Electrical and Plumbing Supplies and Materials (Contents of Container
Lot #659) (BUYER MUST LOAD) |
| 574 |
$2,100.00 |
Fabric Rolls and Grass Matting (Contents of Container Lot #660)
(BUYER MUST LOAD) |
| 575 |
$900.00 |
PVC Fittings, Conduit, and Conduit Rack (Contents of Container
Lot #667) (BUYER MUST LOAD) |
| 576 |
$100.00 |
Paint, Paint Thinners, Masonry Coatings, and Additives (Contents
of Container Lot #668) (BUYER MUST LOAD) |
| 577 |
$10.00 |
Sweeping Compound and Cart (Located in Container Lot #670) |
| 578 |
$1,000.00 |
2" and 3" Suction and Discharge Hose (Located in
Container Lot #672) (BUYER MUST LOAD) |
| 579 |
$400.00 |
Water Hose, Sprinklers, and Irrigation Supplies (Located in
Container Lot #672) (BUYER MUST LOAD) |
| 580 |
$250.00 |
Air Hose (Located in Container #672) (BUYER MUST LOAD) |
| 581 |
$1,250.00 |
Masonry Tools, Slush Boots, and Rain Coats (Contents of Container Lot #673) (BUYER MUST LOAD) |
| 582 |
$3,750.00 |
Pallet Racking and Metal Shelving (Contents of Container Lot
#674) (BUYER MUST LOAD) |
| 583 |
$450.00 |
Chain Link Fence Hardware (Contents of Container Lot #675) (BUYER
MUST LOAD) |
| 584 |
$2,400.00 |
Road Signs, Windmaster Sign Stands,
Barricades, and Posts (Contents of Container Lot #678) (BUYER MUST LOAD) |
| 585 |
$1,100.00 |
Safety Barrels and Weights (Contents of Container Lot #679)
(BUYER MUST LOAD) |
| 586 |
$1,700.00 |
(25) VANGUARD 6' Walk Through Scaffold Bucks, with cross braces |
| 587 |
$1,300.00 |
(24) VANGUARD 6' Walk Through Scaffold Bucks, with cross braces |
| 588 |
$1,200.00 |
(20) VANGUARD 6' Scaffold Bucks, with cross braces |
| 589 |
$1,000.00 |
(20) VANGUARD 6' Scaffold Bucks, with cross braces |
| 590 |
$900.00 |
(20) VANGUARD 6' Scaffold Bucks, with cross braces |
| 591 |
$1,800.00 |
(20) VANGUARD 6' Scaffold Bucks, with cross braces |
| 592 |
$900.00 |
(20) VANGUARD 6' Scaffold Bucks, with cross braces |
| 593 |
$1,400.00 |
(20) VANGUARD 6' Scaffold Bucks, with cross braces |
| 594 |
$750.00 |
(15) VANGUARD 6' Scaffold Bucks, with cross braces |
| 595 |
$25.00 |
(13) Assorted Scaffold Bucks |
| 596 |
$150.00 |
Assorted Scaffold Cross Braces |
| 597 |
$275.00 |
Scaffold Screw Jacks, Castors, and Pins |
| 598 |
$350.00 |
VANGUARD Scaffold Handrail Brackets and Posts |
| 599 |
$3,000.00 |
(140+/-) 10' OSHA Approved Scaffold Planks |
| 600 |
$3,250.00 |
(179+/-) 10' OSHA Approved Scaffold Planks (Located in Container
Lot #661) (BUYER MUST LOAD) |
| 601 |
$3,250.00 |
(125+/-) 10' OSHA Approved Scaffold Planks (Located in Container
Lot #661) (BUYER MUST LOAD) |
| 602 |
$160.00 |
UNUSED LOUISVILLE Rolling Tower Scaffold |
| 603 |
$160.00 |
UNUSED LOUISVILLE Rolling Tower Scaffold |
| 604 |
$5.00 |
Rolling Scaffold |
| 605 |
$275.00 |
WERNER 32' Fiberglass Extension Ladder and WERNER 16' Fiberglass
Ladder |
| 606 |
$300.00 |
(1) LOUISVILLE and (1) WERNER 28' Fiberglass Extension Ladders |
| 607 |
$225.00 |
LOUISVILLE 24' Fiberglass Extension Ladder |
| 608 |
$100.00 |
LOUISVILLE 10' Fiberglass Step Ladder |
| 609 |
$250.00 |
(2) WERNER and (1) LOUISVILLE 6' Fiberglass Step Ladder |
| 610 |
$70.00 |
(1) 5' and (1) 3' LOUISVILLE Fiberglass Step Ladders |
| 611 |
$20.00 |
(1) 10' Aluminum Step Ladder and (1) 28' Aluminum Extension
Ladder |
| 612 |
$100.00 |
Drywall Cart |
| 613 |
$300.00 |
(3) UNUSED BRENTWOOD Brick Barrows |
| 614 |
$325.00 |
(3) UNUSED BRENTWOOD Brick Barrows |
| 615 |
$60.00 |
(2) Brick Barrows |
| 616 |
$25.00 |
Wheelbarrow and Asphalt Lutes |
| 617 |
$950.00 |
(8) UNUSED Wheelbarrows |
| 618 |
$600.00 |
Concrete Chute and Mortar Pans |
| 619 |
$950.00 |
UNUSED Spade Shovels |
| 620 |
$950.00 |
UNUSED Square Shovels |
| 621 |
$350.00 |
UNUSED Snow Shovels |
| 622 |
$750.00 |
UNUSED Street Brooms and Spare Handles |
| 623 |
$250.00 |
3" and 4" Trenching Shovels and Ice Breakers |
| 624 |
$50.00 |
Assorted Brooms, Shovels, Rakes, and Pitch Forks |
| 625 |
$130.00 |
Picks and Mattocks, and Handles |
| 626 |
$400.00 |
Mortar Pans and Stands |
| 627 |
$450.00 |
AMERICAN STANDARD Bottle Cage |
| 628 |
$450.00 |
AMERICAN STANDARD Bottle Cage |
| 629 |
$120.00 |
(2) UNUSED WERNER 350 lb Pull Down
Attic Stairs |
| 630 |
$10.00 |
(6) Wood and (1) Metal 36" x 90" UNUSED Doors |
| 631 |
$350.00 |
Air Hose |
| 632 |
$475.00 |
UNUSED Asphalt Lutes and Rakes |
| 633 |
$1.00 |
Wooden Ladders |
| 634 |
$275.00 |
Tree Ball Cart |
| 635 |
$50.00 |
(2) Broadcast Spreaders |
| 636 |
$2,400.00 |
Safety Cones and Safety Fence |
| 637 |
$1,600.00 |
(2 Pallets) UNUSED Silt Fence |
| 638 |
$10.00 |
(6) ABTECH Ultra Urban Filters |
| 639 |
$3,600.00 |
14' Sections of 6", 8", 16", and 18" SDR 35
Pipe |
| 640 |
$5,750.00 |
(2 Stacks) PVC Conduit |
| 641 |
$9,750.00 |
(3 Stacks) PVC Pipe |
| 642 |
$5,100.00 |
Galvanized Fence Posts and Top Rail, Chain Link Fence, Privacy
Slats, and Gates |
| 643 |
$60.00 |
(15 Pallets) Cement Veneer Blocks |
| 644 |
$325.00 |
(5 Pallets) Red Brick |
| 645 |
$25.00 |
(14 Pallets) Retaining Wall Block, Cinder Block, Pavers, and
Bricks |
| 646 |
$210.00 |
(3 Pallet Crates) Cut Stone |
| 647 |
$175.00 |
(3 Pallets) Brick |
| 648 |
$475.00 |
(4 Pallets) Flag Stone |
| 649 |
$3,700.00 |
Iron Inlets, Risers, and Grates |
| 650 |
$1,100.00 |
(3 Pallets) Asphalt Cut Back and Roof Coating |
| 651 |
$5,600.00 |
(10) 1 Cubic Yard Stackable Block Forms |
| 652 |
$5,000.00 |
(85+/-) 1 Cubic Yard Stackable Blocks, with lifting eyes |
| 653 |
$3,500.00 |
(16 Pallets) UNUSED Street Lamp Posts, Globes, Arm Kits, and
Hardware (Everything in Corner of Yard) |
| 654 |
$1,300.00 |
Assorted PVC Pipe, Plastic Tubing, Flexible Drain, and Corrugated
Plastic Pipe |
| 655 |
$3,500.00 |
2006 8' x 20' Storage Container, with pallet racking |
| 656 |
$3,750.00 |
2004 8' x 20' Storage Container, with metal shelving |
| 657 |
$3,400.00 |
2004 8' x 20' Storage Container |
| 658 |
$3,400.00 |
2003 8' x 20' Storage Container, with pallet racking |
| 659 |
$3,400.00 |
2005 8' x 20' Storage Container, with metal shelving |
| 660 |
$3,400.00 |
2003 8' x 20' Storage Container |
| 661 |
$4,350.00 |
2006 8' x 20' Storage Container |
| 662 |
$3,450.00 |
2003 8' x 20' Storage Container |
| 663 |
$3,450.00 |
2005 8' x 20' Storage Container |
| 664 |
$3,250.00 |
2014 8' x 20' Storage Container |
| 665 |
$3,250.00 |
2014 8' x 20' Storage Container |
| 666 |
$4,000.00 |
2018 8' x 20' Storage Container, with pallet racking |
| 667 |
$4,000.00 |
2018 8' x 20' Storage Container, with pallet racking |
| 668 |
$4,000.00 |
2018 8' x 20' Storage Container |
| 669 |
$4,000.00 |
2018 8' x 20' Storage Container |
| 670 |
$4,000.00 |
2018 8' x 20' Storage Container |
| 671 |
$3,250.00 |
2013 8' x 20' Storage Container |
| 672 |
$3,450.00 |
2013 8' x 20' Storage Container, with metal shelving |
| 673 |
$3,400.00 |
2014 8' x 20' Storage Container, with metal shelving |
| 674 |
$3,400.00 |
2014 8' x 20' Storage Container |
| 675 |
$3,350.00 |
1992 8' x 20' Storage Container, with wood shelving |
| 676 |
$3,350.00 |
1987 8' x 20' Storage Container |
| 677 |
$2,750.00 |
1991 8' x 20' Storage Container |
| 678 |
$3,300.00 |
1993 8' x 20' Storage Container |
| 679 |
$3,300.00 |
1991 8' x 20' Storage Container |
| 680 |
$2,750.00 |
1993 8' x 20' Storage Container |
| 681 |
$3,500.00 |
2003 8' x 20' Storage Container, with pallet racking |
| 682 |
$2,800.00 |
8' x 40' Aluminum Storage Container, with pallet racking |
| 683 |
$5.00 |
Metal Desk, Credenza, and Chair |
| 684 |
$0.00 |
Metal Desk, with return and (2) 2-Drawer Lateral File Cabinets |
| 685 |
$0.00 |
(2) Metal Cabinets, with wood top |
| 686 |
$3.00 |
EPSON Photo 1400 Color Printer |
| 687 |
$50.00 |
Round Table and (4) Chairs |
| 688 |
$0.00 |
Coffee Table, (4) Chairs, and (2) Smoking Stands |
| 689 |
$70.00 |
(2) 4-Drawer Lateral File Cabinets |
| 690 |
$25.00 |
4-Drawer Fireproof File Cabinet |
| 691 |
$110.00 |
(5) 4-Drawer Lateral File Cabinet, with wood top |
| 692 |
$35.00 |
(2) 4-Drawer Lateral File Cabinet, with wood top |
| 693 |
$25.00 |
4-Drawer Lateral File Cabinet, with wood top |
| 694 |
$55.00 |
Drafting Table, with stool |
| 695 |
$325.00 |
RICOH Aficio 240W Blueprint Printer, Scanner, Copier, Fax |
