|
To search Listing, use Control F (PC), Command F (MAC)
September 14, 2022 |
Paul Giroux, Inc.
Wind Gap, Pennsylvania
|
Absolute Auction |
Notice: Following 50 years in the commercial land clearing and demolition business, the owner of Paul Giroux, Inc has decided it is time to retire from the industry in order to pursue other interests. All equipment is owned by Paul Giroux, Inc. and has been well maintained and will positively sell to the highest bidder without minimums or reserves. |
Location: 550 Male Road, Wind Gap, PA 18091 (Please Note: There will be NO LIVE BIDDING onsite) |
LIVE, VIRTUAL AUCTION: This auction is being conducted via LIVE, VIRTUAL ONLINE ONLY. There will be NO LIVE BIDDING FROM THE SITE. ADDITIONALLY, there will be NO PAYMENTS accepted at the auction site! Payment must be paid either by wire transfer or credit card. |
Terms: Complete payment immediately after receipt of invoice by wire transfer or credit card only. Credit card payments will be charged a 3% processing fee. |
Online Bidding: Live internet bidding will be provided by Proxibid. Proxibid will charge an Internet Service Provider Fee of 5% to the successful internet bidder for items over $10,000 and 10% for items $10,000 and under, for each lot purchased on-line. All bidders are required to register to bid through Proxibid. |
Sales Tax: Since this contractor is selling items not normally sold in the course of their business, the Commonwealth of Pennsylvania considers this an isolated sale and does not require the auction company to collect sales tax. |
Removal: After complete payment items can be removed sale day until 4:00pm. Items may also be removed during weekdays from 8:00am to 4:00pm thru Wed., Sept. 21. The site will be closed Sat. and Sun. All items must be removed by Wed. Sept. 21, 2022 at 4:00pm. |
PA Auction License No: AY000281 |
1 |
$350.00 |
HUSQVARNA 3120K Demo
Saw, with diamond and abrasive blades |
2 |
$600.00 |
ICS 695 GC Concrete
Chain Saw, with spare chain |
3 |
$425.00 |
HUSQVARNA 372XP Chain
Saw, with 28" bar |
4 |
$375.00 |
HUSQVARNA 455 Chain
Saw, with 20" bar (Runs - Has Gas Leak) |
5 |
$375.00 |
HUSQVARNA 372XP Chain
Saw, with 20" bar |
6 |
$325.00 |
HUSQVARNA 372XP Chain
Saw, with 20" bar |
7 |
$375.00 |
HUSQVARNA 372XP Chain
Saw, with 20" bar |
8 |
$200.00 |
Chain Saw Accessories:
sharpener; bar vises; protective headgear; motor parts; and bars |
9 |
$115.00 |
RED LION 2"
Centrifugal Pump, with discharge hose |
10 |
$75.00 |
2" Suction and
Discharge Hose |
11 |
$15,750.00 |
2020 MILLER Bobcat 200
Air Pack, s/n NA430814R, air compressor/generator/welder/starter, powered by
Kohler gas engine with air receiver tank (042 Hours) |
12 |
$1,050.00 |
100 Gallon Fuel Tank,
with 12 volt pump, and 20 gallon hydraulic oil tank with pneumatic pump and
hose reel |
13 |
$950.00 |
COLL-O-CRIMP Plus
Portable Hydraulic Hose Crimper, with Weatherhead dies, pneumatic |
14 |
$350.00 |
(2) CATERPILLAR
Hydraulic System Pressure Test Kits |
15 |
$1,750.00 |
CRAFTSMAN Tool Chest
and Contents |
16 |
$350.00 |
KOBALT Tool Chest and
Contents |
17 |
$1,750.00 |
CRAFTSMAN Tool Chest
and Contents |
18 |
$450.00 |
Tool Kit (1 Pallet) |
19 |
$250.00 |
Tool Kit (1 Pallet) |
20 |
$750.00 |
Tool Kit (1 Pallet) |
21 |
$250.00 |
Tool Kit (1 Pallet) |
22 |
$500.00 |
Tool Kit (1 Pallet) |
23 |
$250.00 |
RIDGID 60" Pipe
Wrench |
24 |
$175.00 |
(5) RIDGID Pipe
Wrenches |
25 |
$450.00 |
(10) RIDGID Pipe
Wrenches |
26 |
$200.00 |
Bolt Cutters, Cable
Cutters, and Crimpers |
27 |
$90.00 |
(2) PITTSBURGH
3/4" Drive Socket Sets |
28 |
$80.00 |
MASTERHAND 3/4"
Drive Socket Set |
29 |
$80.00 |
Freon Charging Gauges
and Flaring Tool Kit |
30 |
$70.00 |
MILWAUKEE Hole Hawg |
31 |
$160.00 |
MILWAUKEE 18 Volt
Impact Wrench, 1/2" drive |
32 |
$180.00 |
MILWAUKEE 18 Volt
Impact Wrench, 1/2" drive |
33 |
$150.00 |
EARTHQUAKE 20 Volt Impact
Wrench, 1/2" drive |
34 |
$45.00 |
MILWAUKEE Sawsall |
35 |
$30.00 |
DEWALT Cordless Drill
and Electric Sawsall |
36 |
$30.00 |
MILWAUKEE Sawsall |
37 |
$130.00 |
MILWAUKEE Porta Band
Saw |
38 |
$170.00 |
MILWAUKEE 18 Volt
Grease Gun |
39 |
$100.00 |
DEWALT 20 Volt Grease
Gun |
40 |
$100.00 |
DEWALT 20 Volt Grease
Gun |
41 |
$10.00 |
PORTER CABLE Cordless
Tool Kit, 20 volt |
42 |
$1,350.00 |
1991 KAWASAKI Model
550SX Jet Ski, hull #KAW20118J091, powered by Kawasaki 550cc gas engine. In
fair to good condition. (No Title) |
43 |
$625.00 |
1973 STEURY 16'
Fishing Boat, hull #SR0041961073, powered by Mercury 90HP, 2-stroke gas
engine, equipped with Minn Kota electric trolling motor, fishing chair, 1974
Little Dude Single Axle Trailer, VIN# 3J17022. In fair to good condition.
(Trailer Titled; No Boat Title) (No VIN Plate on Trailer) |
44 |
$13,750.00 |
2001 FORD Model
F-250XLT Super Duty, 4x4 Extended Cab Pickup Truck, VIN# 1FTNX21F21EC10104,
powered by Powerstroke 7.3L diesel engine and automatic transmission,
equipped with 8' bed, 9' snow plow package, tow package, running boards,
alloy wheels, power windows and locks, cruise control, air conditioning, and
265/75R16 tires. In good condition with good tires. (Odometer Reads 208,678
Miles) (Rebuilt Transmission and Replaced Bed - May 2021) (Purchased New) |
45 |
$14,500.00 |
2003 FORD Model
F-450XL Super Duty Utility Truck, VIN# 1FDXF46F33EA62964, powered by
Powerstroke 7.3L diesel engine and 6 speed manual transmission, equipped with
Knapheide 11' open utility body, material rack, dual rear wheels, air
conditioning, and 225/70R19.5 tires. In good condition with good tires.
(Odometer Reads 176,450 Miles) (Replaced Engine With Running Takeout -
Approximately 25,000 Miles) (Transmission Rebuilt Approximately 2017)
(Purchased New) |
46 |
$69,000.00 |
2020 RAM Model 4500
Heavy Duty, 4x4 Utility Truck, VIN# 3C7WRLBLXLG260210, powered by Cummins
6.7L diesel engine and automatic transmission, equipped with Knapheide 11'
open utility body with material rack, dual rear wheels, power windows and
locks, cruise control, air conditioning, and 225/70R19.5 tires. In very good
condition with very good tires. (Odometer Reads 11,651 Miles) (Purchased New) |
47 |
$105,000.00 |
2018 RAM Model 5500
Heavy Duty, 4x4 Service Truck, VIN# 3C7WRNBL2JG183017, powered by Cummins
6.7L diesel engine and 6 speed manual transmission, equipped with IMT model
2015, 5,000 lb service crane with remote, Miller Bobcat 200 Air Pack
compressor/welder/generator, s/n MJ010547R, powered by Kohler CH730 gas
engine (217 hours), Knapheide 11' mechanics body, Coll-O-Crimp hydraulic hose
crimper, 110 gallon fuel/20 gallon hydraulic oil tank with pumps, dual rear
wheels, running boards, power windows and locks, cruise control, air
conditioning, and 225/70R19.5 tires. In good to very good condition with good
tires. (Odometer Reads 46,704 Miles) (Purchased New) |
48 |
$2,250.00 |
CATERPILLAR Model V60B
Pneumatic Tired Forklift, s/n unknown, powered by flathead 6 cylinder gas
engine and hydrostatic transmission, equipped with 6,000 lb, 36" forks,
2-stage mast, and FOPS canopy. In good condition. (Meter Reads 5,500 Hours)
(RESERVED FOR USE DURING LOADOUT THRU WED., SEPT. 21, 2022 @ 12:00 NOON) |
49 |
$11,500.00 |
2008 TORO Model TX525
Dingo Walk Behind Crawler Loader, s/n 280000242, powered by Kubota diesel
engine and hydrostatic transmission, equipped with 42" general purpose
loader bucket, 23.5" coupler, auxiliary hydraulics, and rubber tracks.
In good condition. (Meter Reads 1,081 Hours) (New Rubber Tracks) |
50 |
$14,000.00 |
2008 CATERPILLAR Model
232B2 Skid Steer Loader, s/n SCH03213, powered by cat diesel engine and
hydrostatic transmission, equipped with 68" general purpose loader
bucket, enclosed ROPS cab with air conditioning and demo screens, and solid
cushion tires. In good condition with good tires. (Meter Reads 4,521 Hours)
(New Complete Engine from Cat January 2022) (Purchased From Cat Rental 1,500
Hours) (RESERVED FOR USE DURING LOADOUT THRU WED., SEPT. 21, 2022 @ 12:00
NOON) |
51 |
$4,750.00 |
1999 JCB Model 1105
Skid Steer Loader, s/n 0804133, powered by diesel engine and hydrostatic
transmission, equipped with 68" general purpose loader bucket, enclosed
ROPS cab with screens, and solid foam filled tires. In fair condition with
poor tires. (Meter Reads 2,611 Hours) |
52 |
$350.00 |
(4) 10-16.5 Pneumatic
Tires, on wheels (Cat 232) |
53 |
$16,250.00 |
1976 RAYGO Rascal
Model 410A Vibratory Compactor, s/n 21C336, powered by Detroit 4-53 diesel
engine and hydrostatic transmission, equipped with 84" smooth drum, drum
drive, ROPS canopy, and 23.1-26 tires. In good condition with fair to good
tires. (Meter Reads 0,214 Hours) |
54 |
$9,500.00 |
KOMATSU Model D45
Crawler Tractor, s/n unknown, powered by Komatsu diesel engine and powershift
transmission, equipped with semi-U blade with tilt, drawbar, ROPS canopy, and
18" SBG pads. In fair to good condition with good undercarriage.
(Missing ID Plate; Model From Records) |
55 |
$33,000.00 |
1997 JOHN DEERE Model
644G Rubber Tired Loader, s/n 559236, powered by John Deere diesel engine and
powershift transmission, equipped with general purpose loader bucket with
bolt-on cutting edge, enclosed ROPS cab with heat, and 23.5R25 tires. In good
condition with good tires. (Meter Reads 10,666 Hours) |
56 |
$105,000.00 |
2007 CATERPILLAR Model
963C Crawler Loader, s/n BBD02900, powered by Cat 3126 diesel engine and
hydrostatic transmission, equipped with general purpose loader bucket with
teeth, enclosed ROPS cab with air conditioning and front screen, and Cat
System 1 undercarriage with 21.5" DBG pads. In good condition with good
undercarriage. (Meter Reads 8,197 Hours) (Purchased With 3,000 Hours - From
Cat Dealer) |
57 |
$75,000.00 |
1999 CATERPILLAR Model
963B LGP Crawler Loader, s/n 9BL03282, powered by cat 3116 diesel engine and
hydrostatic transmission, equipped with general purpose loader bucket with
teeth, front auxiliary hydraulics, enclosed ROPS cab with air conditioning
and front screen, and 22" DBG pads. In good condition with good undercarriage.
(Meter Reads 12,737 Hours) (11/19 - Main Hydraulic Pump Replaced;
Undercarriage Replaced Approximately 1,000 Hours) |
58 |
$38,000.00 |
1994 CATERPILLAR Model
963 Crawler Loader, s/n 21Z05464, powered by Cat 3304 diesel engine and
hydrostatic transmission, equipped with general purpose loader bucket with
teeth, enclosed ROPS cab with front screen, and 22" DBG pads. In good
condition with good undercarriage. (Meter Reads 15,861 Hours) (7/14 -
Replaced Motor With Running Takeout With 3,400 Hours - Approximately 5,500
Hours Ago) (Purchased New) |
59 |
$31,000.00 |
1992 CATERPILLAR Model
973 LGP Crawler Loader, s/n 86G00863, powered by Cat diesel engine and
hydrostatic transmission, equipped with general purpose loader bucket with
teeth, enclosed ROPS cab with air conditioning and front screen, and
20.5" DBG pads. In good condition with good undercarriage. (Meter Reads
16,200 Hours) (Cab Rust) |
60 |
$29,000.00 |
1991 CATERPILLAR Model
D30D, 4x4, 30 Ton End Dump, s/n 3AJ00258, powered by Cat 3306B diesel engine and
powershift transmission, equipped with cab with air conditioning, and 29.5R25
tires. In good condition with good front and fair rear tires. (Meter Reads
15,540 Hours) |
61 |
$118,500.00 |
2014 CATERPILLAR Model
318EL Hydraulic Excavator, s/n WZS00250, powered by Cat C4.4 diesel engine,
equipped with 10'2" dipper stick with hydraulic beyond and stiff arm
bracket, Cat hydraulic coupler, 42" digging bucket, enclosed ROPS cab
with air conditioning and screen and 23.5" TBG pads. In good to very good
condition with good to very good undercarriage. (Meter Reads 4,195 Hours)
(Purchased New) |
62 |
$192,500.00 |
2017 CATERPILLAR Model
336FL Hydraulic Excavator, s/n RKB10268, powered by Cat C9.3 diesel engine,
equipped with 12'10" dipper stick with hydraulic beyond and stiff arm
bracket, Cat hydraulic coupler, Cat 48" digging bucket, enclosed ROPS
cab with air conditioning and screens, and 33.5" TBG pads.. In good to
very good condition with good to very good undercarriage. (Meter Reads 4,441
Hours) (Purchased New) |
63 |
$65,500.00 |
2006 CATERPILLAR Model
330DL Hydraulic Excavator, s/n MWP00933, powered by Cat C-9 diesel engine,
equipped with 10'6" dipper stick with hydraulic beyond and stiff arm
bracket, Cat hydraulic coupler, 48" digging bucket, enclosed ROPS cab
with air conditioning and screens, and 34" TBG pads. In good condition
with good undercarriage. (Meter Reads 12,222 Hours) (Top End Engine Rebuild
3,500 Hours Ago) (11/21 - Replaced Front Idlers - Approximately 500
Hours) (1/18 - Replaced Cylinder Head and Turbo - Approximately
3,000 Hours) (9/16 - Replaced Main Hydraulic Pump with 336 Update and
Complete Undercarriage - Approximately 4,000 Hours) (Hammer Sold
Separately) (Purchased New) |
64 |
$54,500.00 |
2002 CATERPILLAR Model
330CL Hydraulic Excavator, s/n DKY00494, powered by Cat diesel engine,
equipped with 12'10" dipper stick with hydraulic beyond and stiff arm
bracket, Cat hydraulic coupler, 48" digging bucket, enclosed ROPS cab
with air conditioning and screens, and 33.5" TBG pads. In good condition
with good undercarriage. (Meter Reads 17,622 Hours) (Tag Missing - s/n Stamp)
(Main Hydraulic Pump Replaced 2011 - Approximately 7,000 Hours on Pump)
(Purchased New) |
65 |
$41,500.00 |
1995 CATERPILLAR Model
330L Hydraulic Excavator, s/n 5YM00766, powered by Cat 3306B diesel engine,
equipped with 11' dipper stick with stiff arm bracket, 42" digging
bucket, enclosed ROPS cab with screens, and 29.5" TBG pads. In good
condition with good undercarriage. (Meter Reads 15,278 Hours) (RESERVED FOR
USE DURING LOADOUT THRU WED., SEPT. 21, 2022 @ 12:00 NOON) |
66 |
$12,000.00 |
BTI Model TB1680XCQC
Hydraulic Hammer, 7,500 ft lb energy class. (Cat 330D/330C/336F) (Purchased
New) |
67 |
$1,500.00 |
AIM 24" Digging
Bucket, quick coupler (Cat 318) |
68 |
$3,000.00 |
CP 36" Digging
Bucket, quick coupler (Cat 330D/336) |
69 |
$2,500.00 |
42" Digging
Bucket, quick coupler and grading lip (Cat 330D/C) |
70 |
$110.00 |
15" Shop Made
Trenching Bucket (Cat 225) |
71 |
$36,500.00 |
2021 GYRO-TRAC Model
400HDM Forestry Mulcher Head, s/n 400HDM-L1C11, 40" mulching head, quick
coupler (NEW Knives) (Purchased New in 2022) (Cat 318) |
72 |
$20,000.00 |
BTI Model SH400R
Rotating Shear, s/n 801412, 2nd member mount (Cat 330) |
73 |
$20,500.00 |
TRAMAC 900-32,
32" Hydraulic Magnet, s/n 3017-349 (Purchased New) |
74 |
$10,500.00 |
LEMAC Concrete
Pulverizer, direct pin (Cat 330L) (Purchased New) |
75 |
$11,750.00 |
CP 5-Tine Grapple,
quick coupler (Cat 330D/336) (Purchased New) |
76 |
$14,750.00 |
LABOUNTY 5-Tine
Grapple, direct pin (Cat 330L) |
77 |
$5,750.00 |
WBM 5-Tine Grapple,
quick coupler (Purchased New) (Cat 330DL/330CL/330FL) |
78 |
$8,000.00 |
WBM 5-Tine Grapple,
quick coupler (Cat 330DL/336FL) (Purchased New) |
79 |
$5,750.00 |
CAT 5-Tine Grapple,
quick coupler (Cat 318) (Purchased New) |
80 |
$3,250.00 |
4,000 lb Demolition
Ball |
81 |
$2,200.00 |
Shop Made 10'
Demolition Boom, quick coupler (Cat 330) |
82 |
$2,500.00 |
Shop Made 12'6"
Demolition Boom, quick coupler (Cat 318) |
83 |
$3,800.00 |
Shop Made 25'
Demolition Boom, quick coupler (Cat 330) |
84 |
$5,250.00 |
Stump Splitting Spade,
quick coupler (Cat 330DL/330CL/336FL) |
85 |
$125.00 |
(1) 26" and (1)
20" Mechanical Thumbs |
86 |
$1,750.00 |
10' Root Rake (Missing
2 Teeth) (Cat 973) |
87 |
$1,400.00 |
5-Ton Counterweight |
88 |
$900.00 |
UNUSED CAT Cutting
Edge Assembly for 48" Bucket |
89 |
$5.00 |
(11) Assorted Used
Bucket Teeth |
90 |
$300.00 |
42" Bolt-On
Bucket Forks |
91 |
$700.00 |
ROTOBEC Rotating
Grapple |
92 |
$750.00 |
IWI 10' Forklift Boom,
20,000 lb capacity, 2-section manual extension |
93 |
$750.00 |
Shop Made Demolition
Boom (Toro Dingo) |
94 |
$0.00 |
Shop Made Demolition
Boom and Bolt-On Bucket Mount Floor Scrapper (Skid Steer) |
95 |
$2,150.00 |
68" Grapple
Bucket (Skid Steer) |
96 |
$225.00 |
Forks, Grill Guard,
Tow Bar, Ripper Tooth, Hydraulic Cylinders |
97 |
$40,000.00 |
1989 TIMBCO Model T420
Crawler Feller Buncher, s/n 4C-013-121489, powered by Cummins diesel engine
and hydraulic drive, equipped with Timbco feller head with 28" slasher
saw, s/n SW-622-100995A, enclosed operators cab with heat and air
conditioning, and 23.5" SBG pads on Cat undercarriage group. In good
condition with good undercarriage. (Meter Reads 3,076 Hours) (5/18 Both
Hydrostatic Pumps and Drive Motors Replaced - Approximately 500 Hours)
(3/05 - New Main Hydraulic Pump and Spool Valve; Operator Seat Joystick
Controls Replaced - Approximately 2,600 Hours) (2/04 - New Motor Installed
- Approximately 3,000 Hours) (Additional Spare Parts - Located In Parts
Room) |
98 |
$60,500.00 |
2010 CATERPILLAR Model
525C Grapple Skidder, s/n CH52500888, powered by Cat C-7 Acert, 300HP diesel
engine and hydrostatic transmission, equipped with dual arch boom with Cat
rotating grapple, hydraulic winch, 8'11" stacking blade, enclosed ROPS
cab with air conditioning, sweeps and screens, and 30.5L-32 logging tires. In
good condition with good tires. (Meter Reads 10,700 Hours) (2018 - Rebuilt
Arch Cylinders, Pins, and Bushings) |
99 |
$37,500.00 |
1995 CATERPILLAR Model
525 Grapple Skidder, s/n 1DN00297, powered by Cat 3304 diesel engine and
hydrostatic transmission, equipped with Esco dual arch boom with rotating
grapple, 8'11" stacking blade, enclosed ROPS cab with air conditioning,
sweeps and screens, and 30.5L-32 logging tires. In good condition with good
tires. (Meter Reads 14,427 Hours) (No Winch) |
100 |
$5,750.00 |
MORBARK MORBELL 3-Wheeled
Skidder, s/n 299-198, powered by Cummins 3.9L diesel engine and hydrostatic
transmission, equipped with knuckleboom with rotating grapple, enclosed ROPS
cab with screens, 23.1-26 forestry, 40x19-19.5 steer tire. In good condition
with fair to good tires. (Meter Reads 5,945 Hours) |
101 |
$400.00 |
(1 Set) Logging Chains
(2 Wheels) |
102 |
$400.00 |
(1 Set) Logging Chains
(2 Wheels) |
103 |
$20.00 |
(1 Set) Logging Chains
(2 Wheels) |
104 |
$20.00 |
(1 Set) Logging Chains
(2 Wheels) |
105 |
$87,500.00 |
1998 MORBARK Model
23WCL Chiparvestor Portable Whole Tree Chipper, s/n 137, powered by Cat 3412,
800HP diesel engine, equipped with 4-knife disc chipper, Morlift 500 log
loading boom, rotating grapple, hydraulic discharge chute, operators cab, gas
powered air compressor, mounted on tandem axle carrier. In good condition
with good tires. (Meter Reads 00,556 Hours) (New Cat Engine With
Approximately 1,639 Hours; 00,578 Hours On Engine Mechanical Clock)
(Additional Sets of Sharpened and Unsharpened Knives Plus Spare Parts -
Located In Parts Room) |
106 |
$167,500.00 |
1993 DIAMOND Z Model
PWG1463, 14' Tub Grinder, s/n 1D9FX4532PN147091, powered by Cat 3412, 800HP
diesel engine and Cat/Twin Disc PTO, equipped with 14' tub, 60" hammer
mill, 30" folding discharge conveyor, engine roof cover, mounted on
tri-axle carrier with 225/70R22.5 tires. In good condition. (Meter Reads
01,867 Hours; New Hour Clock 2018 @ 1,184 Hours) (New Hydraulic Pump, New
Heads, Pistons, Rings, Liners, Rods and Bearings, and Main Bearings - 2020)
(New Oil Pump; Injectors 2017) (New Radiator Core - 2016) (Unit #DZ2) |
107 |
$85,000.00 |
1991 DIAMOND Z Model
PWG1463, 14' Tub Grinder, s/n 1D9FX4534MN147041, powered by Cat 3412, 800HP
diesel engine and Cat/Twin Disc PTO, equipped with 14' diameter tub, 60"
hammer mill, 30" folding discharge conveyor, hydraulic stabilizers,
mounted on tri-axle carrier with 255/70R22.5 tires. In good condition. (Hobbs
Meter Reads 0,367 Hours; 02,360 Hours On Mechanical Fuel Pump Clock)
(September 2016 - Rebuilt Hydraulic Pump; New Turbos 2017) (New Radiator Core
- 2016) (Unit #DZ1) (Spare Set of Screens) |
108 |
$1,100.00 |
(20 Boxes) UNUSED and
Resurfaced Grinder Tips (Approximately 120 Tips) |
109 |
$1,100.00 |
(32 Boxes) Used
Grinder Tips (Approximately 175 Tips) |
110 |
$325.00 |
(14) Diamond Z Grinder
Shanks and (24) Swing Hammers |
111 |
$2,600.00 |
Tandem Axle 5th Wheel
Dolly (No Title) |
112 |
$80,500.00 |
2000 TESAB Model
RK1012 Roto Crusher Portable Impact Crusher, s/n 051069329, powered by Cat
3306 diesel engine, equipped with vibrating grizzly feeder with hydraulic
wings, Tesab RK1012 impact crusher, s/n 1069, 36" discharge belt, Eriez
30" hydraulic cross-belt magnet, mounted on tri-axle carrier, and
385/65R22.5 tires. In good condition with good tires. (Additional Spare Parts
- Located In Parts Room) |
113 |
$39,500.00 |
1996 PETERBILT Model
379 Tri-Axle Truck Tractor, VIN# 1XP5DB9X9TN401025, powered by Cat 3406,
425HP diesel engine (increased to 460HP) and Eaton Fuller 8LL, 10 speed
transmission, equipped with 44,000 lb rears, 12,680 front axle, wetline
system, Peterbilt Air Trac air ride suspension, 2-stage engine brake, double
frame, locking differential, aluminum headache rack, aluminum fenders,
aluminum wheels, heated mirrors, power passenger window, cruise control, air
conditioning, and 11R24.5 tires. In good condition with good tires. (Odometer
Reads 0,454,307 Miles) (Full Motor Rebuild - Approximately 45,000 Miles -
January 2018) (New Rod and Main Bearings, Pistons, Rings, Liners, Oil Jets,
and Injectors) |
114 |
$62,000.00 |
2005 PETERBILT Model
378 Tandem Axle Truck Tractor, VIN# 1XPFD40X25D835809, powered by Cummins
ISX500, 500HP diesel engine and Eaton Fuller RTL016918B, 18 speed
transmission, equipped with 46,000 lb rears, 12,000 lb front axle, wetline
system, Peterbilt Air Trac air ride suspension, 3-stage engine brake, double
frame over axles, full locking differential, air slide 5th wheel, aluminum
headache rack, aluminum wheels, power passenger window, heated mirrors,
cruise control, air conditioning, 11R22.5 front and 11R24.5 rear tires. In
good condition with good tires. (Odometer Reads 141,564 Miles) (Meter Reads
8,598 Hours) |
115 |
$26,000.00 |
2005 PETERBILT Model
378 Tandem Axle Truck Tractor, VIN# 1XPFDB0X05D874872, powered by Cat C15,
625HP double turbo diesel engine and Eaton Fuller 13 speed transmission,
equipped with 46,000 lb rears, 12,860 lb front axle, wetline system,
Peterbilt Air Trac air ride suspension, 3-stage engine brake, double frame
over axles, air slide 5th wheel, aluminum wheels, cruise control, air
conditioning, and 11R24.5 tires. In good condition with good tires. (Odometer
Reads 402,243 Miles) (Meter Reads 9,489 Hours) |
116 |
$19,000.00 |
2007 MACK Model CHN613
Tandem Axle Truck Tractor, VIN# 1M1AJ06Y47N010008, powered by Mack E427
diesel engine (increased to 460HP) and Maxitorque T310, 10 speed
transmission, equipped with 40,000 lb rears, 12,000 lb front axle, wetline
kit, air slide 5th wheel, air ride suspension, aluminum wheels, 2-stage
engine brake, cruise control, air conditioning, and 11R24.5 tires. In good
condition with good tires. (Odometer Reads 688,102 Miles) (Meter Reads 23,438
Hours) (New Long Block From Mack - Approximately 125,000 Miles 9/16; New Rear
Axle Approximately 50,000 Miles) |
117 |
$8,000.00 |
2000 FREIGHTLINER
Tandem Axle Truck Tractor, VIN# 1FUY3WEB2YDG23675, powered by Cat C12, 455HP
diesel engine and Eaton Fuller 9 speed transmission, equipped with 40,000 lb
rears, 12,000 lb front axle, wetline kit, single frame, air ride suspension,
Jacobs 3-stage engine brake, cruise control, air conditioning, and 11R22.5
tires. In fair to good condition with fair to good tires. (Odometer Reads
628,038 Miles) |
118 |
$87,500.00 |
2020 FONTAINE Model
Magnitude 55HDSR Heavy Haul 55 Ton Tri-Axle Lowboy Trailer, VIN#
57JE52306L3577716, equipped with non ground bearing hydraulic detachable, 26'
drop side deck, 102" wide, boom well, air lift 3rd axle, 4th axle
prepped, adjustable ride height, Hendrickson air ride suspension, outriggers
and chain dogs, spare tire, and 275/70R22.5 tires. In very good condition
with good to very good tires. (Purchased New) |
119 |
$24,000.00 |
2009 TALBERT Model
TDW-40-HRG-1-T1, 40 Ton Tandem Axle Lowboy Trailer, VIN# 40FS0452991030578,
equipped with non ground bearing hydraulic detachable, 22'6" level deck,
102" wide, 9' open over wheels, spring suspension, aluminum wheels,
outriggers and chain dogs, and 255/70R22.5 tires. In good condition with good
tires. (Decking Fair) (Purchased New) |
120 |
$48,000.00 |
2009 JMH Model
J3684CBMBH Tandem Axle Tub Style Steel Dump Trailer, VIN# 1J9BH362491070933,
equipped with Hardox lined tub-style dump body, Hendrickson air ride
suspension, 70,000 lb GVWR, and 11R22.5 tires. In good condition with very
good tires. (Purchased New) |
121 |
$17,500.00 |
1999 SPECTEC Tandem
Axle Steel Dump Trailer, VIN# 1S9DS2833XS188007, equipped with spring
suspension, aluminum wheels (2 steel), and 11R24.5 tires. In good condition
with good tires. |
122 |
$4,000.00 |
1989 PARKER Model
TDS-30, 30' Tandem Axle Steel Dump Trailer, VIN# 1P9DS7H23KA053336, equipped
with spring suspension, 80,000 lb GVWR, and 11R22.5 tires. In fair condition
with good tires. (Reconstructed Title) |
123 |
$50,000.00 |
2007 MAC 48' Tandem
Axle Walking Floor Trailer, VIN# 5MAMN48267C012168, equipped with Keith
walking floor, 80,000 lb GVWR, aluminum smooth side, and 11R22.5 tires. In
good condition with good tires. |
124 |
$37,000.00 |
2006 EAST Tandem Axle
Walking Floor Trailer, VIN# 1E1U2X28X6RD39267, equipped with Keith walking
floor, 80,000 lb GVWR, roll tarp, Reyco spring suspension, and 11R24.5 tires.
In good condition with good tires. |
125 |
$25,500.00 |
2004 PEERLESS 45'
Tandem Axle Walking Floor Trailer, VIN# 1PLE045214PB53686, equipped with
Keith walking floor, roll tarp, Air-Weigh trailer scale (condition unknown),
Hendrickson air ride suspension, aluminum wheels, and 11R24.5 tires. In good
condition with good tires. (Missing ID Plate) (Reconstructed Title) |
126 |
$5,000.00 |
1992 EAST Tandem Axle
Walking Floor Trailer, VIN# PA SPECIAL PLATE 1E1UX284NRK12979, equipped with
roll tarp, sliding tandems, spring suspension, and 11R22.5 tires. In fair
condition with fair tires. |
127 |
$11,000.00 |
1983 MACK Model R688ST
Tri-Axle Dump Truck, VIN# 1M2N187X2DA003711, powered by Mack ETAZB, 673A,
315HP diesel engine and Mack 10 speed extended range splitter transmission,
equipped with 15' steel dump body with air gate, Aero power tarp, 2-stage
engine brake, spring/beam suspension, and 11R22.5 tires. In good condition
with good tires. (Odometer Reads 384,621 Miles) (Meter Reads 5,057 Hours)
(1977 Engine) (New Transmission with Approximately 10,000 Miles) |
128 |
$12,500.00 |
1997 MACK Model CH613
Tandem Axle Log Loader Tractor, VIN# 1M2AA12C4VW079221, powered by EM7-300,
V-Mac diesel engine and Mack T2060, 6 speed extended range transmission,
equipped with Hood 8000 knuckleboom log loader with operator seat, Rotobec
rotating grapple, Hendrickson air ride suspension, 38,000 lb rears and 12,350
lb front axle, Jacobs 2-stage engine brake, sliding 5th wheel, double
frame/triple frame under log loader, Protech headache rack, (2) outriggers,
cruise control, 315/80R22.5 front and 11R22.5 rear tires. In good condition with
good tires. (Odometer Reads 365,871 Miles) (Meter Reads 18,028 Hours) |
129 |
$29,000.00 |
2014 MANAC Model
21242A201, 42' Tandem Axle Log Trailer, VIN# 5MC224213E5142997, equipped with
(6) galvanized log bunks with ratchet straps, 90,000 lb GVWR, spring suspension,
and 11R22.5 tires. In good condition with good tires. (Purchased New) |
130 |
$950.00 |
1964 FRUEHAUF Model
PL-F2W-38, 38' Tandem Axle Log Trailer, VIN# FWD719407, equipped with (4) log
bunks, ratchet straps, and 11R22.5 tires. In good condition with very good
tires (2 fair). (Newer Log Bunks, Brakes, Brake Chambers, and Axle Work) |
131 |
$5,500.00 |
1976 FORD Cab Over
Single Axle Water Truck, VIN# D80DVC62978, powered by Cat 3208 diesel engine
and 5 speed transmission with 2 speed rear, equipped with Allied 3,000
gallon, 3-compartment aluminum body, 2" gas powered pump, hose reel,
rear spray head, air brakes, and 11R22.5 tires. In fair to good condition
with good tires. (Odometer Reads 00,758 Miles) (Water Body Good; Cab Fair;
Converted Fuel Truck) |
132 |
$6,500.00 |
1987 MACK Model R686ST
Tandem Axle Fuel Truck, VIN# 1M2N179Y6HA006956, powered by Mack EM6-300,
300HP diesel engine and 6 speed lo-hole transmission, equipped with Allied
3,000 gallon (2500/500) aluminum fuel body with pump, meter, and hose. In
fair to good condition with good tires. (Odometer Reads 851,964 Miles) |
133 |
$1,900.00 |
1980 HAHN Model HCP10
Fire Pumper Truck, s/n HCP248108035, powered by Detroit 8V-71 diesel engine
and automatic transmission, equipped with 500 gallon water tank, Winco gas
powered 4000 watt generator, and 11.00R20 tires. In good condition with fair
to good tires. (Odometer Reads 038,357 Miles) |
134 |
$2,300.00 |
1968 FRUEHAUF 8,000
Gallon Tandem Axle Aluminum Fuel Storage Trailer, VIN# UNJ3074-10, equipped
with Fill-Rite 115 volt electric fuel pump and meter, and 11R24.5 tires.
Aluminum tank in good condition with good tires. (No Title - Off Road Use
Only) |
135 |
$2,200.00 |
COLL-O-CRIMP Hydraulic
Hose Crimping Station, with collets, 6-braid hose capacity, Ridgid chop saw,
work table with vise, and hydraulic hose (BUYER MUST LOAD) |
136 |
$2,700.00 |
WEATHERHEAD Crimp
Fittings, with (4) bins and stands (BUYER MUST LOAD) |
137 |
$700.00 |
CAT Hydraulic Hose
Press, with collets and fittings (BUYER MUST LOAD) |
138 |
$2,400.00 |
MILLER XMT 304 CC/CV
DC Inverter Arc Welder, Miller 22A wire feed unit, gas bottle, and cart |
139 |
$1,800.00 |
MILLER XMT 304 CC/CV
DC Inverter Arc Welder, equipped with Miller S-60 wire feeder, gas bottle,
and cart |
140 |
$425.00 |
COBRAMATIC Push-Pull
Wire Feeder Aluminum Wire Welder, with gas bottle |
141 |
$650.00 |
THERMO DYNAMICS
Cutmaster 101 Plasma Cutter |
142 |
$100.00 |
MILLER Super S-32P
Voltage Sensing Wire Feeder |
143 |
$5.00 |
CK SYSTEMATICS Wire
Feeder Spool Gun |
144 |
$250.00 |
UNUSED BERNARD
.035/.045/1/16" Wire Capacity Wire Feed Gun |
145 |
$50.00 |
HOBART BETA-MIG 200
Mig Welder |
146 |
$500.00 |
Oxygen/Acetylene Torch
Set, with cart and bottles |
147 |
$525.00 |
Oxygen/Acetylene Torch
Set, with cart and bottles |
148 |
$250.00 |
Oxygen/Acetylene Torch
Set, with stand and bottles |
149 |
$325.00 |
Portable
Oxygen/Acetylene Torch Set |
150 |
$250.00 |
Track Torches and
Accessories |
151 |
$550.00 |
(25 Boxes) HOBART 3/32
Mig Wire, with reels and UNUSED gun |
152 |
$1,000.00 |
Line Boring Kit |
153 |
$300.00 |
Welding Accessories
and Bottle Cart |
154 |
$2,200.00 |
Welding Gas Bottles to
Include: (5) full bottles argon/carbon dioxide; (5) full bottles oxygen; (3)
full bottles acetylene; (5) assorted empty bottles |
155 |
$300.00 |
Assorted C-Clamps |
156 |
$700.00 |
INGERSOLL RAND T30,
2-Stage Horizontal Air Compressor, 10HP, 3-phase |
157 |
$5.00 |
POWEREX Tandem 2-Stage
Air Compressor, 2HP, 3-phase each |
158 |
$700.00 |
ATLAS COPCO GAU20-125
Rotary Screw Horizontal Air Compressor, 20HP, 3-phase |
159 |
$375.00 |
QUINCY Climate Control
Tandem Air Compressor, with dryer, 1HP, 3-phase each |
160 |
$700.00 |
INGERSOLL RAND Gas
Power Air Compressor, Kawasaki 11.5HP (Runs - No Battery) |
161 |
$160.00 |
INGERSOLL RAND T30 Gas
Powered Air Compressor, Kohler 10HP |
162 |
$300.00 |
CHAMPION Climate
Control 2-Stage Air Compressor, 3/4HP, single phase |
163 |
$75.00 |
DRI-AIRE Air Dryer |
164 |
$350.00 |
Gas Powered Hydraulic
Power Unit, Honda 11HP |
165 |
$600.00 |
KOHLER Fast Response
II, 65KW Generator, Ford V-8 propane/natural gas, single/3-phase, with
transfer switch (924 Hours) |
166 |
$225.00 |
KATO LIGHT 23KW
Standby Generator, 120/208 volt, 3-phase, 4 cylinder propane/natural gas |
167 |
$325.00 |
BIG JOE 12 Volt
Forklift Battery Charger |
168 |
$150.00 |
HENDEY Lathe, 30"
bed, belt drive, single phase |
169 |
$1,600.00 |
SOUTHBEND 10"
Lathe, 24" bed, gear drive, single phase |
170 |
$1,550.00 |
ENCO 30 Milling and
Drilling Machine, X/Y axis bed, machinist vise, single phase, 110V, with bits
and accessories |
171 |
$300.00 |
JET Dual Wheel Grinder
and Metal Bench |
172 |
$75.00 |
Pin and Bushing Stock,
with rack |
173 |
$1,100.00 |
Post Alloy Tungsten
Carbide Weld Applicator, for use in resurfacing grinding teeth, bench,
exhaust, fan, and oven |
174 |
$1,050.00 |
THOMPSON Surface
Grinder, with magnetic table (3-phase) |
175 |
$100.00 |
Steel Horses |
176 |
$600.00 |
50 Ton Hydraulic Shop
Press, with electric power pack (3-phase) |
177 |
$175.00 |
Manual Pin Driver |
178 |
$550.00 |
MILWAUKEE Magnetic
Drill Press, 3/16" chuck |
179 |
$4,600.00 |
STIP TECHNOLOGY
Electric Wire Stripper |
180 |
$300.00 |
(4) OREGON 28"
Tree Harvester Bars and 50' UNUSED Chain and Chain Breaker, Riveter and Sharpener |
181 |
$1,300.00 |
4'x8' Steel Welding
Table, with vise, 1" plate top |
182 |
$950.00 |
40"x8' Steel
Welding Table, with vise, 3/4" plate top |
183 |
$140.00 |
DAYTON 1" Drive
Pneumatic Impact Wrench |
184 |
$30.00 |
DAYTON 1" Drive
Pneumatic Impact Wrench |
185 |
$140.00 |
EARTHQUAKE 1"
Drive Pneumatic Impact Wrench |
186 |
$140.00 |
CP 1" Drive
Pneumatic Impact Wrench |
187 |
$140.00 |
INGERSOLL RAND 1"
Drive Pneumatic Impact Wrench |
188 |
$30.00 |
CP 1" Drive
Pneumatic Impact Wrench |
189 |
$40.00 |
EARTHQUAKE and
INGERSOLL RAND 3/4" Pneumatic Impact Wrenches |
190 |
$130.00 |
(2) INGERSOLL RAND
3/4" Pneumatic Impact Wrenches |
191 |
$25.00 |
(3) 1/2" Drive
Pneumatic Impact Wrench, Air Ratchet, and Die Grinder |
192 |
$350.00 |
3 to 1 Torque
Multiplier, 3/4" in, 1" out |
193 |
$450.00 |
600 ft lb, 3/4"
Torque Wrench and WRIGHT 1" Drive Ratchet |
194 |
$150.00 |
PITTSBURGH 1"
Drive, 10-Piece, 1" to 2" Impact Socket Set |
195 |
$140.00 |
PITTSBURGH 1"
Drive, 10-Piece, 1" to 2" Impact Socket Set |
196 |
$130.00 |
INGERSOLL RAND 1"
Drive, 8-Piece, 7/8" to 1.5" Deep Well Impact Socket Set |
197 |
$190.00 |
(20) Assorted 1"
Drive Impact Sockets |
198 |
$375.00 |
8-Piece, 3/4"
Drive Impact Socket Set |
199 |
$60.00 |
(2) Right Angle
Grinders |
200 |
$110.00 |
(3) 4.5" Angle
Grinders, Circular Saw, and Drill |
200A |
$15.00 |
OSTER Electric Pipe
Threader, with dies, oiler, and stand |
201 |
$1,300.00 |
HYDRO TEK 4000 PSI/3.5
GPM Gas Powered Pressure Washer, with heat, Honda GX390 |
202 |
$15.00 |
NORTH STAR 2000
PSI/1.5 GPM Electric Pressure Washer |
203 |
$30.00 |
BRUTE Electric Air Compressor |
204 |
$375.00 |
Sandblast Pot, with
whip line and nozzle |
205 |
$100.00 |
Parts Washer, with
cart and partial drum of parts cleaner |
206 |
$20.00 |
1,250 lb Engine Stand |
207 |
$125.00 |
(3) Manual Lubers,
Barrel Cart, 2-Wheel Dolly, and Rolling Table |
208 |
$180.00 |
(2) Rolling Stairs |
209 |
$110.00 |
Power Cords and Work
Lights |
210 |
$35.00 |
(3) Shop Vacs |
211 |
$25.00 |
ECHO Gas Blower |
212 |
$1.25 |
TITAN Airless Paint
Sprayer |
213 |
$70.00 |
DYNA-BLO 170,000 BTU
Kerosene Space Heater |
214 |
$25.00 |
SNAP-ON MT52 Alternator
Tester |
215 |
$80.00 |
SCHUMACHER 6/12 Volt
Batter Charger |
216 |
$80.00 |
SCHUMACHER 6/12 Volt
Batter Charger |
217 |
$90.00 |
12 Volt Transfer Pump,
on cart |
218 |
$200.00 |
CENTRAL HYDRAULICS
10-Ton Porta Power Set |
219 |
$55.00 |
Cable Cutter |
220 |
$50.00 |
(2) 8-Ton Jack Stands |
221 |
$800.00 |
OTC 5019 Transmission
Jack |
222 |
$80.00 |
Wheel Dolly |
223 |
$55.00 |
3-Ton Floor Jack |
224 |
$750.00 |
100 Ton, 50 Ton, and
20 Ton Bottle Jacks, with pneumatic pump |
225 |
$70.00 |
(3) Bottle Jacks |
226 |
$60.00 |
(3) Bottle Jacks |
227 |
$275.00 |
Cabinet and Contents
of Assorted Lubes and Fluids |
228 |
$275.00 |
(1 Drum) 50/50
Extended Life and 1/2 Full Drum of Green Concentrate Anti-Freeze, and 5
Gallon and 1 Gallon Pales of Lubricants |
229 |
$40.00 |
Contents Only of Peg
Board and Bench |
230 |
$325.00 |
Chains and Straps |
231 |
$50.00 |
Cabinet and Contents |
232 |
$350.00 |
Chain Binders and
Come-A-Longs |
233 |
$325.00 |
Pulling Sets |
234 |
$130.00 |
Spanner Wrenches,
Rivet Guns, Cable Clamps, Fan Belts, and Tubing |
235 |
$120.00 |
Nitrogen Charging
System, with nitrogen bottle |
236 |
$800.00 |
Pipe Fittings and Bins
(BUYER MUST LOAD) |
237 |
$600.00 |
(3) 4-Drawer Parts
Bins, with stand and contents (BUYER MUST LOAD) |
238 |
$275.00 |
(3) 4-Drawer Parts
Bins, with stand and contents (BUYER MUST LOAD) |
239 |
$55.00 |
Truck Tractor Air
Hose, Electric Pig Tails, and Hose Clamps (BUYER MUST LOAD) |
240 |
$1,250.00 |
(3) Bolt Bins and
Contents (BUYER MUST LOAD) |
241 |
$950.00 |
(3) Bolt Bins and
Contents (BUYER MUST LOAD) |
242 |
$950.00 |
(3) Bolt Bins and
Contents (BUYER MUST LOAD) |
243 |
$400.00 |
(3) Bolt Bins, Tool
Chest, and Parts Drawers, with contents (BUYER MUST LOAD) |
244 |
$110.00 |
(2 Bins) Brass
Fittings (BUYER MUST LOAD) |
245 |
$400.00 |
(2) Shelving Units of
Welding Supplies (Contents Only) (BUYER MUST LOAD) |
246 |
$350.00 |
(1) Shelving Unit of
Diamond Z Parts (Contents Only) (BUYER MUST LOAD) |
247 |
$250.00 |
(1) Shelving Unit of
JD, Raygo, and Truck Parts (Contents Only) (BUYER MUST LOAD) |
248 |
$425.00 |
(2) Shelving Units of
Truck and Trailer Parts (Contents Only) (BUYER MUST LOAD) |
249 |
$600.00 |
Large Sockets and
Wheel Nut Sockets (BUYER MUST LOAD) |
250 |
$75.00 |
(1) Shelf of Safety
Gear and Oils (Contents Only) (BUYER MUST LOAD) |
251 |
$500.00 |
(3) Shelving Units of
Cat and Miscellaneous Parts (Contents Only) and 4-Drawer File Cabinet and
Contents (BUYER MUST LOAD) |
252 |
$650.00 |
(5) Shelving Units of
Fuel and Air Filters (Contents Only) (BUYER MUST LOAD) |
253 |
$30.00 |
Ratchet Straps and
Bungie Cords |
254 |
$175.00 |
Workbench, Parts
Cabinet and Contents |
255 |
$150.00 |
Paint Guns and Contents
of Paint Cabinet Only |
256 |
$5.00 |
Contents of Remainder
of Loft, EXCLUDING Pallet Racking and Air Compressor (BUYER MUST LOAD) |
257 |
$45.00 |
RHEEM 50 Gallon
Electric Hot Water Heater |
258 |
$125.00 |
TRANE 3-Ton Air
Conditioning Unit |
259 |
$15.00 |
Roof Top Air
Conditioning Units and Duct Work |
259A |
$350.00 |
(3 Drums) Chain |
260 |
$50.00 |
Contents Only of
Pallet Racking (BUYER MUST LOAD) |
261 |
$120.00 |
Truck Parts |
262 |
$1.00 |
(2) 295/75R22.5 Tires
and (1) 255/70R22.5 Tire |
263 |
$100.00 |
(2) 11R24.5 Tires |
264 |
$100.00 |
(3) 11R24.5 Tires,
with aluminum rims |
265 |
$10.00 |
(4) 285/75R24.5 Tires |
266 |
$25.00 |
(4) 11R24.5 Tires |
267 |
$25.00 |
(3) 11R22.5 Tires |
268 |
$0.00 |
(5) Assorted Tires |
269 |
$120.00 |
(4) UNUSED 22.5"
Steel Rims |
270 |
$110.00 |
(19) Steel and
Aluminum Rims |
271 |
$500.00 |
Steel Stock Rack and
Contents |
272 |
$30.00 |
Dump Hoist |
273 |
$5.00 |
Electric Hoist and
Trolley Gear |
274 |
$25.00 |
MARATHON 40HP, 230/460
Volt, 3-Phase Electric Motor and BELL & GOSSET Hydronic Pump |
275 |
$175.00 |
Road Signs, Safety
Fence, Air Hose, and Discharge Hose |
276 |
$70.00 |
Remainder of Shelving
Contents |
277 |
$950.00 |
(2) Tanks, one with 12
volt pump |
278 |
$125.00 |
Pry Bars |
279 |
$375.00 |
Digging Tools |
280 |
$0.00 |
Concrete and Stone
Seal |
281 |
$5.00 |
Pump Parts |
282 |
$30.00 |
Cable Slings |
283 |
$10.00 |
(2 Pallets) Parts
Drawers |
284 |
$450.00 |
Spreader Chains |
285 |
$175.00 |
Antique Chain Drive
Vise |
286 |
$5.00 |
(2 Pallets) Fire
Extinguishers |
287 |
$15.00 |
Cross Toolbox, Tank,
and Wheel Chocks |
288 |
$160.00 |
Tank, with electric
pump |
289 |
$5.00 |
(2) Tanks |
290 |
$10.00 |
Flexible Drain Pipe
and Plastic Tubing |
291 |
$85.00 |
Aluminum Bleacher
Seats |
292 |
$30.00 |
Galvanized Steel
Posts, Channel, and Angle |
293 |
$50.00 |
MORBARK Cab, Shroud,
and Discharge Chute |
294 |
$30.00 |
Chain Link Fence and
Posts, Pallet Rack Sides |
295 |
$650.00 |
Stainless Steel Sink |
296 |
$850.00 |
(6) 24'L x 10"W x
27"Web Steel I-Beams |
297 |
$1,550.00 |
Remainder of Steel:
casing; I-beams; steel plates; table and stand |
297A |
$130.00 |
7'6" x 8'6"
Stationary Screen, with 1" mesh, on skids |
298 |
$170.00 |
(1) 40' Aluminum Flag
Pole (2 - 20' sections) and (1) 35' Aluminum Flag Pole |
299 |
$15.00 |
NEPTUNE Fuel Meter and
Hose Reel |
300 |
$130.00 |
Conveyor Belt and Wire
Rope Sling |
301 |
$5.00 |
Pressure Washer, Water
Hose, and Poly Tank |
302 |
$5.00 |
(2 Pallets) Stone Caps |
303 |
$450.00 |
Forklift Dump Hopper |
304 |
$325.00 |
Forklift Dump Hopper |
305 |
$200.00 |
Forklift Dump Hopper |
306 |
$5.00 |
(3 Stacks) Tires |
307 |
$5.00 |
Cat 973 Transmission
(Running Take-Out) |
308 |
$125.00 |
(2) 5th Wheels,
Exhaust Stacks, and Forks |
309 |
$325.00 |
Tandem Bogie Set,
Steer Axle, and Lift Axle |
310 |
$20.00 |
Garage Door Panels |
311 |
$1.00 |
Concrete Stairs and
Wrought Iron Handrail |
|
|