1440 Cowpath Rd. Hatfield, Pa 19440 
215 361-9099
Auction Results
Camden Mechanical
HVAC Duct Manufacturing and Sheet Metal Shop
Wednesday, February 7, 2024 – 9:00AM
Camden, New Jersey
ABSOLUTE AUCTION
Notice: By Order of Secured Creditor, all assets of Hays Mechanical, LLC (dba Camden Mechanical) are being sold at Absolute Auction via a live broadcasted, virtual auction. All items will be sold free and clear of any liens or encumbrances and will positively sell to the highest bidder regardless of price, without minimums or reserves.
PA Auction License No: AY000281
| Lot # | Price | Description |
| 1 | $55.00 | BAUER 1631 Electric Demolition Hammer, SDS max |
| 2 | $380.00 | MILWAUKEE M18 Hammer Drill, equipped with (2) batteries and charger, 1-9/16" SDS max |
| 3 | $140.00 | MILWAUKEE M18 Hammer Drill, equipped with battery and charger, 1" SDS plus |
| 4 | $140.00 | MILWAUKEE M18 Hammer Drill, equipped with battery and charger, 1" SDS plus |
| 5 | $140.00 | MILWAUKEE M18 Hammer Drill, equipped with battery and charger, 1" SDS plus |
| 6 | $140.00 | MILWAUKEE M18 Hammer Drill, equipped with battery and charger, 1" SDS plus |
| 7 | $75.00 | (2) MILWAUKEE Corded Hammer Drills, 7/8" SDS plus |
| 8 | $75.00 | (2) MILWAUKEE Corded Hammer Drills, 7/8" SDS plus |
| 9 | $50.00 | (2) BOSCH Bulldog Xtreme Hammer Drills, SDS plus |
| 10 | $50.00 | (1) BOSCH 11224VSR and (2) MILWAUKEE Hammer Drills, SDS plus |
| 11 | $150.00 | UNUSED MILWAUKEE 1/2" Right Angle Drill |
| 12 | $150.00 | UNUSED MILWAUKEE 1/2" Right Angle Drill |
| 13 | $140.00 | MILWAUKEE 1/2" Right Angle Drill |
| 14 | $100.00 | MILWAUKEE 1/2" Hole Hawg Right Angle Drill |
| 15 | $2,300.00 | 2013 FORD Model F-150XL Pickup Truck, VIN# 1FTMF1CM5DKD99406, powered by 3.7L, V-6 gas engine and automatic transmission, equipped with 8′ bed with liner, tow package, power windows, locks, and mirrors, cruise control, air conditioning, and 235/75R15 tires. In good condition with good tires. (Odometer Reads 180,452 Miles) (Inspection Expires June 2024) (Wheel Well Bed Rust – Interior Clean) |
| 16 | $15,500.00 | 2017 RAM Model ProMaster 1500 Cargo Van, VIN# 3C6TRVAG1HE532623, powered by 3.6L gas engine and automatic transmission, equipped with steel cab partition, ladder rack, power windows and locks, cruise control, air conditioning, and 225/17R16 tires. In good condition with good tires. (Odometer Reads 47,710 Miles) (Inspection Expired April 2023) |
| 17 | $28,000.00 | 2016 INTERNATIONAL Model 4300 SBA Single Axle Van Body Truck, VIN# 1HTMMMMM2GH746734, powered by Cummins ISB 6.7L, 220HP diesel engine and automatic transmission, equipped with Morgan 26′ FRP van body with roll-up rear door, loading ramp, and Maxon aluminum liftgate, 25,500 lb GVWR, spring suspension, hydraulic brakes, cruise control, air conditioning, and 295/75R22.5 tires. In good condition with good tires. (Odometer Reads 170,604 Miles) (HB) |
| 18 | $9,000.00 | 2012 ISUZU Model NPR HD Single Axle Van Body Truck, VIN# JALC4W164C7001069, powered by Isuzu diesel engine and automatic transmission, equipped with Morgan 16′ aluminum van body with roll-up rear door and Maxon TE-20 2,000 lb liftgate, dual rear wheels, 14,500# GVWR, spring suspension, power windows and locks, cruise control, air conditioning, and 215/85R16 tires. In good condition with good tires. (Odometer Reads 134,294 Miles) (No Inspection Sticker) (Charging System Issues) |
| 19 | $19,250.00 | 2020 DOOSAN Model GC55C-9, 12,000 lb Cushion Tired Forklift, s/n FGB1C-2560-00051, powered by LP gas engine and shuttle transmission, equipped with 3-stage mast, 152" lift height, hydraulic side shift, 54" manual position forks, and FOPS canopy. In good condition with good tires. (Meter Reads 4,604 Hours) (Propane Bottle Will Be Removed) (RESERVED FOR USE DURING LOADOUT THRU TUESDAY, FEBRUARY 13, 2024 AT 12:00 NOON) |
| 20 | $6,500.00 | 2006 HYSTER Model S55FTS, 5,500# Cushion Tired Forklift, s/n F187V06594D, powered by LP gas engine and hydrostatic transmission, equipped with 3-stage mast, 189" lift height, hydraulic fork positioner and side shift, 48" forks, and FOPS canopy. In good condition with good tires. (Meter Reads 07,685 Hours) (Propane Bottle Will Be Removed) (RESERVED FOR USE DURING LOADOUT THRU TUESDAY, FEBRUARY 13, 2024 AT 12:00 NOON) |
| 21 | $225.00 | 72" Fork Extension |
| 22 | $100.00 | 60" Fork Extension |
| 23 | $6,500.00 | 2014 DUCTFORMER Model CR14-TDF Roll Former, s/n 140808, 230 volt/3-phase plug-in power, equipped with F-style transverse duct flange connector, (14) station, and 24" infeed table. In good condition. |
| 24 | $3,250.00 | 2016 FLAGLER 20 Gauge High Speed Pittsburgh Roll Former, s/n 717, 230 volt/3-phase plug-in power, 6 station, cart mounted. In good condition. |
| 25 | $2,000.00 | 2001 FLAGLER 20 Gauge High Speed Pittsburgh Roll Former, s/n 535, 230 volt/3-phase plug-in power, 6 station, cart mounted. In good condition. |
| 26 | $3,250.00 | 2017 TIN KNOCKER Model TK16, 16 Gauge Pittsburgh Roll Former, s/n 011701M, 230 volt/3-phase plug-in power, 7 station. In good condition. |
| 27 | $1,000.00 | LOCKFORMER 22 Gauge Cleat Former, s/n 10323, 9 station and ENGEL Model 750 Edge Notcher, s/n 1306-71. In good condition. |
| 28 | $1,300.00 | 2003 FLAGLER 20 Gauge Power Flanger, s/n 115-603, 120 volt. In good condition. |
| 29 | $1,300.00 | LOCKFORMER 18 Gauge Auto – Guide Power Flanger, s/n 1983, 120 volt. In good condition. |
| 30 | $2,000.00 | 1985 TENNSMITH Model A52, 16 GAx52" Air Powered Squaring Shear, s/n 0985, equipped with 13" feed table, (2) 24" front support arms, and manual back gauge. In good condition. |
| 31 | $3,600.00 | PROFAB Model CB14, 20 GAx30" Cleat Bender, s/n 660522, 220 volt/20 amp, equipped with foot pedal control. In good condition. (PL) |
| 32 | $1,700.00 | PROFAB Model CMD05, 30" Cheek Bender, s/n 451117, 115 volt/20 amp, equipped with foot pedal control. In good condition. |
| 33 | $3,100.00 | ROTO-DIE Model 10, 16 GAx10′ Hydraulic Press Brake, s/n 80147, equipped with foot pedal control. In good condition. (Loadout Fee $300 – Loadout Date Wednesday, February 14, 2024 8AM until 3PM) |
| 34 | $600.00 | ENGEL BENDALL Model 1010BA, 16 GAx10′ Mechanical Press Brake, s/n 1857-A-9, powered by 10HP electric motor, equipped with 20" back table and foot pedal control. In good condition. (Loadout Fee $300 – Loadout Date Wednesday, February 14, 2024 8AM until 3PM) |
| 35 | $500.00 | ENGEL BENDALL Model 1010BA, 16 GAx10′ Mechanical Press Brake, s/n 1742-A-7, powered by 10HP electric motor, equipped with 20" back table and foot pedal control. In good condition. (Loadout Fee $300 – Loadout Date Wednesday, February 14, 2024 8AM until 3PM) |
| 36 | $1,250.00 | LOCKFORMER Model Vulcan 2900, 5′ x 10′ Plasma Cutting System, s/n unknown, equipped with 5’x10′ cutting table, HYPERTHERM Powermax 45 plasma cutter, s/n not available, single torch, Dyn-A-Drive G2 control system, exhaust duct, desktop computer and key (software license expired). In good condition. (Loadout Fee $1,250 – Loadout Date Wednesday, February 14, 2024 8AM until 3PM) |
| 37 | $1,250.00 | 1995 LOCKFORMER Model Vulcan 2900, 5′ X 20′ Plasma Cutting System, s/n VUL2758, equipped with (2) 5’x10′ cutting tables, HYPERTHERM Powermax 65 plasma cutter, S/N 65-013221, single torch, Dyn-A-Drive E control system, Samsung 55" flatscreen monitor, exhaust duct, desktop computer and key (software license expired). In good condition. (Loadout Fee $1,750 – Loadout Date Wednesday, February 14, 2024 8AM until 3PM) |
| 37A | $100.00 | HYPERTHERM HT40C Plasma Cutter, s/n 42-002695, 220 volt/single phase, equipped with travel torch and leads. |
| 38 | $18,000.00 | ENGEL EUROPA/AUTOFOLD 516, 5′ x 16 GA I-Fold Automated Duct Coil Line, s/n 898, equipped with 2-coil hydraulic I beam de-coiler, shear, (2) pair notching stations, cleat roll formers, leveler and beader rolls, (2) large and small Pittsburgh right side eject seam machines, machine control systems, pedestal mounted. In good condition. (Loadout Fee $2,800 – Loadout Date Wednesday, February 14, 2024 8AM until 3PM) |
| 38A | $1,750.00 | (2) Sheet Metal Coils, 60" x 22 GA and 26" x 16 GA |
| 39 | $4,750.00 | DURO DYNE Model RH Mach II Rolling Head Pinspotter, s/n 42062, 220 volt/single phase, equipped with 5′ throat, vibrating pin bowl, trigger switch control, 4′ x 10′ layout table, and shelf with pin inventory. In good condition. |
| 40 | $2,900.00 | 2004 DURO DYNE Model LS, 60" Duct Liner Sizer, s/n 3460, equipped with insulation liner spool, slitting assembly, single cross cut slitter, and 8′ collecting table, In good condition. |
| 41 | $625.00 | (5 Rolls) Duct Insulation Liner, Duct Liner Adhesives, Pump and Gun, and Spray Pot |
| 42 | $2,950.00 | (2) DURO DYNE MFPT Portable Pin Spotters, 220 volt. |
| 43 | $1,700.00 | 1993 MILLER Model SSW-2020ATT, 20KVA Resistance Spot Welder, s/n KD481856, Stock #902996, 220 volt/single phase, equipped with 15" throat, foot pedal control, MILLER Radiator-1 cooling system, style JG34. In good condition. |
| 44 | $1,800.00 | THOMSON Model 161 Rivet Machine, s/n JLT16124, 120 volt, equipped with 16" throat, adjustable height, pedestal mounted. In good condition. |
| 45 | $600.00 | INGELS Power Bead Machine, 120 volt, equipped with 14" throat. |
| 46 | $750.00 | 8′ Manual Press Brake, s/n unknown, 4′ x 8′ back table. In good condition. |
| 47 | $150.00 | 2003 TENNSMITH Model S4822, 22 GAx48" Bench Mounted Hand Brake, s/n 07403. In good condition. |
| 48 | $600.00 | TENNSMITH 48" Bench Mounted Hand Brake, s/n unknown, 48" x 53" table. In good condition. |
| 49 | $100.00 | ARROW 30" Bench Top Brake |
| 50 | $700.00 | PEXTO Model 381D, 36" x 22 GA Pyramid Roll, TIN KNOCKER Crimper, and ROPER WHITNEY Manual Beader, mounted on 48" x 48" rolling steel table. |
| 51 | $325.00 | 2007 TENNSMITH Model CB30, 20GAx30" Manual Cleat Bender, s/n 05007. In good condition. |
| 52 | $950.00 | LOCKFORMER 24" Button Punch Cheek Bender, s/n unknown, 120 volt, equipped with foot control. In good condition. |
| 53 | $275.00 | PEXTO 30" Hand Brake and 18" Cheek Bender, mounted on 46" x 46" rolling table. |
| 54 | $800.00 | DAYTON SPEEDAIRE 2-Stage Vertical Shop Air Compressor, 5HP, 230/460 volt/3-phase, 16.5CFM @ 175 PSI |
| 55 | $100.00 | HUSKY 60 Gallon Vertical Shop Air Compressor, 3.7HP induction motor, 230 volt/single phase, 10.2CFM @ 90PSI (New Motor August 2023) |
| 56 | $900.00 | 2019 NANO-PURIFICATION NXC, Cycling Refrigerated Air Dryer, 115 volt, dual transfer, HX technology. |
| 57 | $1,250.00 | MECO Cantilevered Sheet Metal Rack, 8’w x 6’d x 12’h, with sheet metal inventory to include: 5′ x 10′ sheets, 20 gauge stainless; aluminum; 24 gauge and 20 gauge galvanized; 20, 22, 24, and 26 gauge galvanized. (BUYER MUST DISMANTLE) |
| 57A | $500.00 | STEELTREE Cantilevered Steel Stock Rack and Contents, (4) 10′ columns and 4′ arms (BUYER MUST DISMANTLE) |
| 57B | $1,000.00 | 5′ x 10′ Sheet Metal Inventory and Pallet Rack: 24 GA Stainless; 26 GA Aluminum Perforated; 24 GA Aluminum; (28 Sheets) 26 GA Beaded Galvanized; (30 Sheets) 24 GA Galvanized (Located in Storage Container) |
| 57C | $350.00 | DEWALT 14" Metal Cutting Chop Saw Station, with 10′ x 30" table. |
| 58 | $500.00 | LINCOLN Model 140C Mig Welder, 120 volt, 20 amp, equipped with gun, gas gauge, hood, and cart. |
| 59 | $200.00 | LINCOLN Model SP-135T Mig Welder, 120 volt, 20 amp, equipped with gun. |
| 60 | $250.00 | MILLER Millermatic 130 Welding Power Source/Wire Feeder, 115 volt, 20 amp, equipped with gun. |
| 61 | $475.00 | HYPERTHERM Powermax 1000 G3 Series Plasma Cutter |
| 62 | $100.00 | PROLINE Turbo Torch Plasma Cutter, 110 volt, 20 amp, 1/8" capacity. |
| 63 | $150.00 | LINCOLN Model 100SG Magnum Pro Spool Gun |
| 64 | $25.00 | LINCOLN Model AC-225C Arc Welder, 230 volt, 50 amp. |
| 65 | $125.00 | MILLER Thunderbolt AC/DC Welding Power Source, 225 amp AC/150 amp DC. |
| 66 | $25.00 | CRAFTSMAN 230 Amp AC Arc Welder |
| 67 | $15.00 | WELDMARK Model MIG25-140, 120 Volt Mig Welder (no operating) and (2) NRP Refrigerant Recovery Units |
| 68 | $80.00 | Welding Station, equipped with exhaust system (BUYER MUST DISMANTLE) |
| 69 | $150.00 | Welding Wire, Rods, and Accessories (On Rolling Shelf) |
| 70 | $200.00 | Welding Leads, Tools, and Gauges (On Table) |
| 71 | $150.00 | Table, with vise, bench grinder, (2) cabinets and contents |
| 72 | $220.00 | Welding Screens |
| 73 | $100.00 | DEWALT 14" Chop Saw |
| 74 | $35.00 | RIDGID and EVOLUTION Chop Saws |
| 75 | $130.00 | BERRY Table Top Pneumatic Notcher, equipped with foot control |
| 76 | $65.00 | 4′ x 8′ Rolling Steel Welding Table and 8′ x 3′ Wood Layout Table |
| 77 | $1,000.00 | RIDGID 300 Threader and Oiler |
| 78 | $300.00 | (2) RIDGID Tri-Stands |
| 79 | $500.00 | RIDGID Pipe Threader, Threading Heads, Reamer, Oiler, and Pipe Stands |
| 80 | $150.00 | (12) Pipe Wrenches and Cart |
| 81 | $65.00 | Conduit Hand Benders |
| 82 | $525.00 | DIAMOND CB748 Core Drill, with stand and 9" bit |
| 83 | $525.00 | HILTI DD160 Core Drill, with stand and 5" bit |
| 84 | $300.00 | DIAMOND Core Drill and Stand |
| 85 | $325.00 | (11) Core Drill Bits and Vacuum Pump |
| 86 | $275.00 | CST/BERGER Laser Level and Tri-Pod |
| 87 | $110.00 | POWERMATE 3250 Watt Generator |
| 88 | $110.00 | POWERMATE 3250 Watt Generator (Runs On Ether – Makes Electric) |
| 89 | $375.00 | HUSKY Tool Chest and Contents |
| 90 | $1,350.00 | ORIFLOW Cobra Air Leakage Tester |
| 90A | $225.00 | ROTOBRUSH Duct Cleaning System |
| 91 | $10.00 | QUINCY 2-Stage Horizontal Air Compressor, 115/230 volt/single phase |
| 92 | $30.00 | HUSKY Vertical Air Compressor, 115/230 volt/single phase |
| 93 | $30.00 | SPEEDAIRE Portable Air Compressor |
| 94 | $30.00 | CAMPBELL HAUSFELD Portable Air Compressor |
| 95 | $60.00 | Bolt Cutters, HUSKIE Crimper, and Dies |
| 96 | $675.00 | (6) Board Mounted Strap Cutters |
| 97 | $675.00 | (6) Board Mounted Strap Cutters |
| 98 | $675.00 | (4) Board Mounted Strap Cutters |
| 99 | $200.00 | MILWAUKEE Porta Band Saw, with case |
| 100 | $200.00 | MILWAUKEE Porta Band Saw, with case |
| 101 | $300.00 | MILWAUKEE Porta Band Saw, with case |
| 102 | $300.00 | MILWAUKEE Porta Band Saw, with case |
| 103 | $300.00 | MILWAUKEE Porta Band Saw, with case |
| 104 | $200.00 | (2) MILWAUKEE Porta Band Saws |
| 105 | $200.00 | (2) MILWAUKEE Porta Band Saws |
| 106 | $135.00 | Porta Band Saw Blades |
| 107 | $50.00 | DEWALT 1" SDS Hammer Drill and Vacuum Kit |
| 108 | $160.00 | DEWALT 1" SDS Hammer Drill and Vacuum Kit |
| 109 | $160.00 | DEWALT 1" SDS Hammer Drill and Vacuum Kit |
| 110 | $55.00 | DEWALT Hammer Drill and (2) Vacuums (No Batteries) |
| 111 | $250.00 | (3) MILWAUKEE and HILTI Hammer Drills (No Hilti Battery) |
| 112 | $275.00 | UNUSED MILWAUKEE Hammer Drill Vacuum Kit, with M12 battery, charger, and case |
| 113 | $275.00 | MILWAUKEE Hammer Drill Vacuum Kit, with M12 battery, charger, and case |
| 114 | $275.00 | MILWAUKEE Hammer Drill Vacuum Kit, with M12 battery, charger, and case |
| 115 | $150.00 | MILWAUKEE Hammer Drill Vacuum Kit, with M12 battery, charger, and case |
| 116 | $80.00 | TRAK-IT C5DT Battery Operated Nailer |
| 117 | $400.00 | (4) MILWAUKEE M18 Impact Drivers, with battery and charger, 1/4" hex |
| 118 | $425.00 | (4) MILWAUKEE M18 Impact Drivers, with battery and charger, 1/4" hex |
| 119 | $425.00 | (4) MILWAUKEE M18 Impact Drivers, with battery and charger, 1/4" hex |
| 121 | $75.00 | (3) MILWAUKEE and (1) B&D Sawzalls |
| 122 | $70.00 | (3) MILWAUKEE Sawzalls |
| 123 | $85.00 | (3) MILWAUKEE Sawzalls |
| 124 | $60.00 | (3) MILWAUKEE Sawzalls |
| 125 | $175.00 | MILWAUKEE Drill, Impact Drivers, Batteries, and Chargers |
| 126 | $350.00 | (2) UNUSED MILWAUKEE M18 Cordless 18 Gauge Shears (tool only) and (1) MILWAUKEE Cordless Shear, with battery |
| 127 | $125.00 | (5) Electric Shears |
| 128 | $30.00 | (3) Roto Zip Tools |
| 129 | $200.00 | MILWAUKEE M18 Cordless Grease Gun, with battery and charger |
| 130 | $125.00 | (4) MILWAUKEE 4-1/2" Electric Grinders |
| 131 | $120.00 | (4) MILWAUKEE 4-1/2" Electric Grinders (1 Grinder Has Broken Plug) |
| 132 | $120.00 | (4) MILWAUKEE 4-1/2" Electric Grinders |
| 133 | $140.00 | (3) DEWALT 4-1/2" Electric Grinders |
| 134 | $50.00 | (6) 4-1/2" Electric Grinders |
| 135 | $80.00 | DEWALT 9" Electric Grinder |
| 136 | $25.00 | (2) Jig Saws and (2) Circular Saws |
| 137 | $5.00 | (2) Jig Saws and (2) Circular Saws |
| 138 | $40.00 | (2) MILWAUKEE 1/2" Electric Drills and (2) Powder Actuated Fasteners |
| 139 | $575.00 | (4) Pneumatic Tapping Hammers |
| 140 | $80.00 | RYOBI 10" Table Saw and Stand |
| 141 | $220.00 | Contractor Tool Cart and Contents |
| 142 | $220.00 | Contractor Tool Cart and Contents |
| 143 | $220.00 | RYOBI Cordless Tools, with batteries and chargers (all working) and Tool Cart |
| 144 | $210.00 | RYOBI Cordless Drills and Impact Drivers (Tools Only) (Tested – All Working) |
| 145 | $170.00 | Shop Fans |
| 146 | $15.00 | (3) Shop Vacs |
| 147 | $50.00 | GRACO 390ST Airless Paint Sprayer, with hose, gun, and rollers |
| 148 | $150.00 | Tool Cart, with ear plugs, hard hats, gloves, and vests |
| 149 | $375.00 | Tool Cart, with duct tape, painters tape, aluminum tape, and galvanizing spray paint |
| 150 | $300.00 | HILLMAN 8 Ton Roller Kit |
| 151 | $350.00 | (4) Machinery Dollies |
| 152 | $75.00 | Johnson Bar |
| 153 | $245.00 | Rolling Job Box ,with rigging and nylon slings |
| 154 | $175.00 | LOUISVILLE 28′ and 16′ Fiberglass Extension Ladders |
| 155 | $75.00 | LOUISVILLE 8′ Fiberglass Step Ladder |
| 156 | $90.00 | (2) 6′ and (1) 4′ Fiberglass Step Ladders |
| 157 | $125.00 | (2) 20′ Fiberglass Extension Ladders |
| 158 | $275.00 | (6) Fiberglass Step Ladders: (3) 10′; (2) 8′; and (1) 6′ |
| 159 | $275.00 | (6) Fiberglass Step Ladders: (2) 10′; (2) 8′; and (2) 6′ |
| 160 | $275.00 | (6) Fiberglass Step Ladders: (2) 10′; (2) 8′; and (2) 6′ |
| 161 | $275.00 | (6) Fiberglass Step Ladders: (1) 10′; (3) 8′; (1) 6′; and (1) 4′ |
| 162 | $325.00 | (6) Fiberglass Step Ladders: (2) 10′; (2) 8′; (1) 6′; and (1) 4′ |
| 163 | $275.00 | (6) Fiberglass Step Ladders: (1) 12′; (1) 10′; (1) 8′; (1) 6′; and (2) 4′ |
| 164 | $275.00 | (6) Fiberglass Step Ladders: (1) 12′; (1) 10′; (1) 8′; (1) 6′; and (2) 4′ |
| 165 | $150.00 | WERNER 60′, 3-Section Aluminum Extension Ladder |
| 166 | $75.00 | (2) 40′ Aluminum Extension Ladders |
| 167 | $80.00 | (1) 24′ and (1) 16′ Aluminum Extension Ladders |
| 168 | $325.00 | LOUISVILLE 16′ x 24" Aluminum Pick Board, 500 lb capacity |
| 169 | $325.00 | LOUISVILLE 16′ x 24" Aluminum Pick Board, 500 lb capacity |
| 170 | $100.00 | LOUISVILLE 16′ x 14" Aluminum Pick Board, 500 lb capacity |
| 171 | $1,200.00 | SUMNER 2112, 650 lb Material Hoist |
| 172 | $1,200.00 | SUMNER 2112, 650 lb Material Hoist |
| 173 | $850.00 | Aluminum A-Frame Rolling Gantry, 2,000 lb capacity, with CM 2 ton chain fall |
| 174 | $375.00 | Steel A-Frame Rolling Gantry, 600 lb capacity, with CM 2 ton chain fall |
| 175 | $75.00 | CALDWELL 2 Ton Spreader Beam |
| 176 | $225.00 | (3 Sets) BAKER Scaffolding, with stabilizers and casters (In Storage Box) |
| 177 | $350.00 | (5 Sets) BAKER Scaffolding, with (3) guardrail sets, (4) platforms, and castors. |
| 178 | $120.00 | (24) Wood Furniture Dollies |
| 179 | $4,500.00 | 2018 8′ x 20′ Full Side-Access Storage Container, with (4) folding side doors and end doors. In very good condition. (BUYER MUST LOAD) |
| 180 | $300.00 | (4) Rolling Gang Boxes |
| 181 | $300.00 | (4) Rolling Gang Boxes |
| 182 | $300.00 | (4) Rolling Gang Boxes |
| 183 | $250.00 | (4) Rolling Gang Boxes (2 Small Boxes) |
| 184 | $35.00 | (3) Steel rolling Carts and Sheet Metal Cart |
| 185 | $200.00 | (3 Sections) Pallet Racking, with additional cross braces (BUYER MUST DISMANTLE) |
| 186 | $575.00 | Spiral Duct Sections and Fittings |
| 187 | $500.00 | Duct Fittings to Include: Power and Manual Dampers, Vents, and Power Ventilators (On Pallet Rack and Inside Container) (BUYER MUST LOAD) |
| 188 | $475.00 | Galvanized Angle Stock, Slotted Channel Stock, and Rubber Bases |
| 189 | $25.00 | Safety Barricades, Cones, and Pylons |
| 190 | $75.00 | Contents of Shed: Electric Mortar Mixer; Lawn Mower; Gas Blowers; Shovels; and Fuel Cans |
| 191 | $100.00 | Shelving Unit, Shop Cart, and Contents (Shop Electrical Cage) (BUYER MUST LOAD) |
| 192 | $40.00 | (3) 3′ x 7′ Rolling Layout Tables, wood frame with metal tops, and steel cart with metal top |
| 193 | $225.00 | SUMNER 6,600 lb Pallet Jack |
| 194 | $225.00 | SUMNER 6,600 lb Pallet Jack |
| 195 | $225.00 | SUMNER 6,600 lb Pallet Jack |
| 196 | $275.00 | (2 NEW IN BOX) RUBBERMAID Utility Carts |
| 197 | $135.00 | (2) Platform Carts and Drywall Cart |
| 198 | $55.00 | (3) Platform Carts |
| 199 | $125.00 | Rolling Stairs and Platform Cart |
| 200 | $60.00 | (4) Hand Trucks |
| 201 | $70.00 | Appliance Dolly and (3) Hand Trucks |
| 202 | $175.00 | Utility Cart and Hardware Contents and Rolling Magnet Sweep |
| 203 | $150.00 | Utility Cart and Hardware Contents |
| 204 | $150.00 | Utility Cart and Hardware Contents |
| 205 | $150.00 | Utility Cart and Hardware Contents |
| 206 | $150.00 | Utility Cart and Hardware Contents |
| 207 | $150.00 | Utility Cart and Hardware Contents |
| 208 | $375.00 | Utility Cart with SDS Concrete Drill Bits, Sawzall Blades, Grinding and Sanding Discs, and Chop Saw Blades |
| 209 | $125.00 | Rolling Spool Dispenser, with wire mesh |
| 210 | $675.00 | Rolling Shelf Unit and Platform and Utility Carts of Hardware (Along Wall) (BUYER MUST LOAD) |
| 211 | $775.00 | Round Duct Sections, Collars, Fittings, Adapters, Diffusers, and (4 Boxes) ProFlex duct connector, (On Pallet Rack – Both Sides of Shop) (BUYER MUST LOAD) |
| 211A | $100.00 | (5 Sections) Pallet Racking (BUYER MUST DISTMANTLE – LOADOUT ON TUES. 2/13/24) |
| 212 | $1,000.00 | Flexible Insulated Duct Tubing and Duct Sealants (Contents of Pallet Rack and Loft) (BUYER MUST LOAD) |
| 213 | $100.00 | 4′ x 8′ x 1/8" Sheet Metal |
| 214 | $40.00 | (2) Rolling Steel Tables |
| 215 | $40.00 | 4′ x 8′ Rolling Steel Shop Table |
| 216 | $40.00 | 4′ x 8′ Steel Shop Table, 32" H |
| 217 | $30.00 | 4′ x 8′ Steel Shop Table, 28" H |
| 218 | $30.00 | 4′ x 8′ Steel Shop Table, 35" H |
| 219 | $300.00 | Contents of Van Trailer (At Loading Dock): Plastic Shelving, Power Cords, Fall Arrest Safety Equipment, Wire Spools, Hardware, etc. (BUYER MUST LOAD) |
| 220 | $100.00 | EAGLE 750 lb Dock Plate |
| 221 | $85.00 | UNUSED All Thread: 5/8" – 11 zinc plated, 10′ and 6′ rod sections |
| 222 | $2,100.00 | KIP 7100 Multi-Function Blueprint Printer, with toner and paper |
| 223 | $325.00 | CANNON C2230 Color Copier |
| 224 | $25.00 | Reception Desk, (2) Leather Chairs, (2) Bookcases, Cabinet, and Table (BUYER MUST LOAD) |
| 225 | $60.00 | Contents of Executive Office: Mahogany Workstation Desk with Credenza, Rug, and Chairs (BUYER MUST LOAD) |
| 226 | $40.00 | Contents of Office: Workstation Desk with Credenza, Bookshelves, Lateral File Cabinet, and Office Chair (BUYER MUST LOAD) |
| 227 | $60.00 | (2) Office Workstations with partitions, cabinets, and chairs (BUYER MUST LOAD) |
| 228 | $50.00 | Corner Desk with Credenza, Brother Printer, HP Desktop Computer, Office Chair, 7′ Table, and Office Supplies in Closet (BUYER MUST LOAD) |
| 228A | $30.00 | (4) Wood Bar Stools, (2) Swivel Stools, and (3) Stacking Chairs |
| 229 | $45.00 | Contents of Office: Workstation Desk with Credenza, Computer Table, (2) Office Chairs, Sitting Chair, and Rug (BUYER MUST LOAD) |
| 230 | $60.00 | Contents of (2) Offices: (4) Folding 8′ to 6′ Tables, Office Chairs, (1) Dell Desktop Computer and (3) Acer Monitors, Office Chairs, Bookshelves, and Stationary (BUYER MUST LOAD) |
| 231 | $80.00 | JOOLA Folding Ping Pong Table |
| 232 | $1.00 | Contents of Breakroom: Refrigerator, (2) Microwaves, Table and (6) Chairs (Exclude Water Dispenser) (BUYER MUST LOAD) |
| 233 | $120.00 | (2) WELLSYS Hot/Cold Water Filtration and Dispenser Units (1 In Breakroom and 1 in Shop) |
| 234 | $1.00 | (3) Vacuum Cleaners and Cleaning Supplies (In Breakroom and In Shop Corner) |