1440 Cowpath Rd. Hatfield, Pa 19440 
215 361-9099
Auction Results
Production Components Corporation
Tuesday, March 7, 2023 – 9:00AM
Lansdale, Pennsylvania
ABSOLUTE AUCTION
Notice: For over 40+ successful years, Production Components Corp has represented premier manufacturers in the field of assembly, automation and production throughout the Northeast. However, the owner of PCC has determined that it is time to cease operations in order to retire. All equipment is owned by Production Components and will positively sell to the highest bidder, regardless of price, at a virtual, live-broadcasted Absolute Auction.
PA Auction License No: AY000281
| Lot # | Price | Description |
| 1 | $11,000.00 | 2007 YALE Model GLC050VXNUAE083, 5,000 lb Solid Tired Forklift, s/n A910V09170E, Mazda propane engine, equipped with 189″ 3-stage mast, side shift, 42″ forks, FOPS canopy. (Tank Not Included) (Meter Reads 03,467 Hours) (RESERVED FOR USE DURING LOADOUT THRU TUESDAY, MARCH 14TH AT 12 NOON) |
| 2 | $2,100.00 | 1990 NISSAN Model CPH01A15V, 3,000 lb Solid Tired Forklift, s/n CPH01-920438, powered by 4 cylinder propane engine and shuttle transmission, equipped with 130″ 2-stage mast, 45″ forks. In good condition with good tires. (Meter Reads 3,372 Hours) (Tank Not Included) (RESERVED FOR USE DURING LOADOUT THRU TUESDAY, MARCH 14TH AT 12 NOON) |
| 2A | $50.00 | 60″ Fork Extensions |
| 3 | $550.00 | Forklift Dump Hopper, on wheels |
| 4 | $550.00 | Forklift Dump Hopper, on wheels |
| 5 | $600.00 | Forklift Dump Hopper |
| 6 | $550.00 | Forklift Dump Hopper |
| 7 | $1,800.00 | 1997 MACK Model CS200P Single Axle Van Body Truck, VIN# VG6BA07A5VB502062, powered by Mack 6 cylinder diesel engine and automatic transmission, equipped with Morgan aluminum van body 22’6″x8’6″, rear roll-up door, air brakes, aluminum disc wheels, and 11R22.5 tires. In good condition with good tires. (283,760 Miles) (PA Inspection Expired) |
| 8 | $25.00 | DEMAG 1 Ton Electric Hoist, with power trolley, 460 volt/3-phase |
| 9 | $500.00 | 1999 ANVER 6,000 lb Vacuum Lifter, s/n 997598, 110 volt, single phase, equipped with VPF-3 Vac-Pack vacuum generator, (6) 16″ vacuum cups, 10′ max load length, and 6′ max load width |
| 10 | $700.00 | 2002 ANVER Model VP1, 1,500 lb Vacuum Lifter, s/n 200637-5, with VP1 Vac-Pack vacuum generator, (6) 10″ vacuum cups, 115 volt (wired remote not working) |
| 11 | $250.00 | WEIGHT-PLATE Platform Scale, with digital readout |
| 12 | $550.00 | INGERSOLL RAND Model IRN50H-CC, 145PSI Rotary Screw Electric Air Compressor, s/n NV3299U08031, 50HP, 460 volt, 3-phase, equipped with IR model NVC400A400 air dryer, and 120 gallon vertical air receiver, (Meter Reads 24,734 Hours) (Loading Fee $2,850/Loadout Date Thursday 3/16/23) |
| 13 | $50.00 | 1999 KELLOGG AMERICAN/LEROI 2-Stage, 4 Cycle Shop Air Compressor, s/n 02F1048PKZ, 25 HP, 1999 MTA model DE105 air dryer, s/n 1100909761 (240 volt/3-phase) (Loading Fee $1,675/Loadout Date Thursday 3/16/23) |
| 14 | $550.00 | 1993 LEROI 125PSIG Rotary Screw Air Compressor, s/n AER0468, compressor 240 volt, 3-phase, with General Air Products model GHT110 air dryer. (Meter Reads 18,406 Hours) (115 volt) |
| 14A | $200.00 | (2) SPEEDAIR Air Dryers |
| 15 | $350.00 | L-TEC Model V1-300, 300 Amp Mig Welder Power Source, s/n C90A-11824, with model Mig 31A wire feeder and Gun Plus aluminum welding spool gun, and (35+/-) spools .035 aluminum wire. (240 volt/3-phase) |
| 16 | $250.00 | AIRCO Model Arc 350 CV, 350 Amp Mig Welder Power Source, s/n RH307201, with Airco Universal IV wire feeder with (3) spools welding wire (240 volt/3-phase) |
| 17 | $80.00 | MILLER Model 330A/BP AC/DC, 300 Amp Tig Welder Power Source, s/n S427616 |
| 18 | $55.00 | MILLER Model Dialarc HF CC AC/DC, 250 Amp Arc Welder Power Source, s/n JG092918 (Not Working) |
| 19 | $175.00 | 1999 PRO-WELD Model CD-312 Stud Welder, #2-5/16″ stud range, 24 welds per minute. |
| 20 | $600.00 | Cabinet and Contents of Welding Accessories and Tools |
| 21 | $5.00 | Shop Bench, (3) Racks, and Contents |
| 22 | $50.00 | Welding Table and Rotating Positioner |
| 23 | $60.00 | Welding Table and Rotating Positioner |
| 24 | $400.00 | Welding Table and Vise |
| 25 | $3,500.00 | 2004 LORS Model 813, 120KVA Spot Welder, s/n 904-7046, 26″ throat, Intertron microprocessor weld control, and foot pedal. (460 volt/single phase) |
| 26 | $850.00 | 1988 TELEDYNE Model P-50, 100KVA Spot Welder, s/n 880103, 26″ throat, Weltronic microprocessor control, and foot pedal control. (460 volt/single phase) |
| 27 | $5.00 | 2006 KOOLANT KOOLERS Model LKV2000 Chiller, s/n 24028, 2HP compressor and 2HP pump (Missing Compressor Used as Water Circulator) (220 volt/single phase) |
| 28 | $260.00 | WILSON 8-Drawer Cabinet, with spot welding accessories |
| 29 | $65.00 | Roller Table, Shelves, and Cabinet |
| 30 | $550.00 | KALAMAZOO Model H9AW Metal Cutting Band Saw, s/n 6730, 208 volt, 3-phase, equipped with 10’-1″ x 1″ wide blade capacity, coolant system, air operated vise, and spare blades. |
| 31 | $850.00 | 2011 BALEIGH Model CS350EU, 350MM Cold Saw, s/n Unknown, equipped with 24 to 120 RPM variable speed and coolant system. (220 volt/single phase) |
| 32 | $150.00 | ROCKWELL Model BH, 6″ x 24″ Belt Sander, s/n 9083, spare belts and rolling table. (208 volt/3-phase) |
| 33 | $450.00 | ROCKWELL DELTA Combination Belt/Disc Sander, Delta 6″ Belt & 12″ Disc Grinder, motor 1.5 HP, (2) tilting tables. (240- volt/single phase) |
| 34 | $20.00 | STARMARK Model 300, 10′ Stroke Sander, s/n 2109850117, 6″ belt, 8’8″x35″ sliding table. (240 volt/3-phase) |
| 35 | $1,100.00 | RAMCO Model DW37R12 Metal Belt Sander, s/n 412A, 37″x60″ belt, variable speed feed, Accurate Technology pro scale digital measuring (240 volt/3-phase) |
| 36 | $1,100.00 | RAMCO Model DW37R12 Metal Belt Sander, s/n 395A, 37″x60″ belt, variable speed feed, and Accurate Technology pro-scale digital measuring. (240 volt/3-phase) |
| 37 | $150.00 | T&H Dust-Pro Model 31501523 Vertical Dust Collector, s/n 10505-202, 3HP motor (230 volt/3-phase) (Loading Fee ZERO/Loadout Date Thursday 3/16/23) |
| 38 | $150.00 | HAMMOND Model DK8 Vertical Dust Collector, s/n 10239 (220 volt/3-phase) (Loading Fee ZERO/Loadout Date Thursday 3/16/23) |
| 39 | $2,200.00 | ENCO Model 308-0232 Gap Bed Lathe, s/n 80638, equipped with 36″ bed, 14″ swing, 3-jaw chuck, Z and X axis digital readout, (4) tool holder, 45 to 1800 RPM spindle speed, and coolant system. (208 volt/3-phase) |
| 40 | $1,600.00 | MSC Model 16-40G Gap Bed Lathe, s/n Unknown, equipped with 40″ bed, 16″ swing, 12″ 6-jaw chuck, 22 to 1800 RPM spindle speed, center and traveler support, and coolant system. (208 volt/3-phase) |
| 40A | $150.00 | 3-Jaw Automatic Centering Chuck and 4-Jaw Independent Chuck |
| 41 | $1,000.00 | 2009 ENCO Model 0953112 Variable Speed Manual Vertical Milling Machine, s/n 470542, equipped with 42″x9″ slotted bed, power driven X axis, Anilam Wizard 411, 3-axis digital readout, and coolant system. (208 volt/3-phase) |
| 42 | $75.00 | 1967 BRIDGEPORT J Head Vertical Milling Machine, s/n 101506, 1HP, spindle speeds 80 to 2720 RPM, 9″x36″ t-slot table w/power table feed, 2 axis digital readout. (240 volt/3-phase) (2-Axis Readout Not Working) |
| 43 | $100.00 | 1957 BRIDGEPORT J Head Vertical Milling Machine, s/n 37093, 1HP, spindle speeds 80 to 2720 RPM, 9″x32″ t-slot table. (240 volt/3-phase) |
| 44 | $1,100.00 | HITACHI SEIKI Model HT20S II Turning Cell, s/n HTS2252HL, equipped with Seiki multi programmable controller, conversational programming, 8″ chuck, 16″ length capacity, automatic tool changer, (10) tool turret, tool setter, 522 collet chuck, 5C collet chuck, and 8000RPM max spindle speed. (208 volt/3-phase) (Loading Fee $1,890/Loadout Date Monday 3/13/23) |
| 45 | $850.00 | HITACHI SEIKI Model VM40H Vertical Machining Center, s/n VM4155HL, equipped with Yasnac MX3 programmable controller, X axis 21″ travel, Y axis 16″ travel, Z axis 16″ travel, (30) tool chain drive automatic tool changer, BT40 tooling, 15″x30″ slotted table, and small quantity of BT40 tooling. (208 volt/3-phase) (Loading Fee $1,890/Loadout Date Monday 3/13/23) |
| 46 | $850.00 | 1996 HITACHI SEIKI Model VM40H Vertical Machining Center, s/n VM4210HL, equipped with Seicos MY programmable controller, X axis 21″ travel, Y axis 16″ travel, Z axis 16″ travel, (20) auto tool change carousel, CT40 tooling, 15″x30″ slotted table, and small quantity of CT40 tooling. (Z Axis Servo Pack Works Intermittently – Needs Replaced) (208 volt/3-phase) (Loading Fee $1,890/Loadout Date Monday 3/13/23) |
| 47 | $20.00 | Various Collets: TG100; ER32; ER20; and Tool Assembly Jig |
| 48 | $65.00 | Hold-Down Kit, 5/8″ |
| 49 | $65.00 | Hold-Down Kit, 5/8″ |
| 50 | $10.00 | Hold-Down Kit, 5/8″ |
| 51 | $10.00 | Hold-Down Kit, 5/8″ |
| 52 | $65.00 | Hold-Down Kit, 1/2″ |
| 53 | $60.00 | KURT Machinist Vise |
| 54 | $200.00 | KURT Machinist Vise |
| 55 | $60.00 | BS Machinist Vise |
| 56 | $25.00 | BRIDGEPORT Machinist Vise |
| 57 | $25.00 | Machinist Vise |
| 58 | $25.00 | Machinist Vise |
| 59 | $40.00 | Machinist Vise |
| 60 | $65.00 | (2) Magnetic Holders |
| 61 | $11,000.00 | 1987 LVD Model JS 25/10 Foot Actuated Hydraulic Power Squaring Shear, s/n 13346, 10′ cutting length, 1/4″ thickness, 10′ squaring arm, (3) support arms, and power back gauge. (240 volt/3-phase) (Loading Fee $1,640) |
| 62 | $6,750.00 | 1989 AMADA Model CSHW-220 Hydraulic Combination Notcher/Coper, s/n 22000814, digital fence system, 1/4″ x 8″ capacity, twin work guide, and foot pedal controls. (240 volt/3-phase) |
| 63 | $475.00 | TENNSMITH Model A36 Pneumatic Shear, s/n 13672, with 36″ shear, 16 GA capacity, and foot control |
| 64 | $3,500.00 | 1983 DARLEY Model EHP 110 31/25, 110 Ton Hydraulic Press Brake, s/n 12462, 10′ bed size, 14″ open height, 9.5″ shut height, ESA Duemila S control CNC back gauge, Safe-T-Lite light curtains, and bench work station. (240 volt/3-phase) (Loading Fee $1,675/Loadout Date Wednesday 3/15/23) |
| 65 | $11,500.00 | CLEARING/NIAGARA Model HBM-100-8-10, 100 Ton Hydraulic Press Brake, s/n P54413, 10′ bed size, 7″ shut height, 14″ open height, 7″ stroke, manual operated control, Safe-T-Lite light curtain, and bench work station. (240 volt/3-phase) (Loading Fee $1,675/Loadout Date Wednesday 3/15/23) |
| 66 | $2,500.00 | 1984 DARLEY Model EHP80, 80 Ton Hydraulic Press Brake, s/n 12606, 8′ bed size, 14″ open height, 9.5″ shut height, Delem model DA-65R CNC controlled back gauge, and control pedestal. (240 volt/3-phase) (Loading Fee $1,675/Loadout Date Wednesday 3/15/23) |
| 67 | $100.00 | 1961 VERSON Model 1648, 15 Ton Mechanical Press Brake, s/n 15910, 48″ bending length, 32″ between uprights, 7.5″ shut height, 2″ stroke, and 1.5″ ram adjustment. |
| 68 | $2,100.00 | Rack of Upper and Lower Press Dies (BUYER MUST LOAD) |
| 69 | $2,100.00 | Rack of Upper and Lower Press Dies (BUYER MUST LOAD) |
| 70 | $2,200.00 | Rack of Upper and Lower Press Dies (BUYER MUST LOAD) |
| 71 | $500.00 | Rack of Upper and Lower Press Dies (BUYER MUST LOAD) |
| 72 | $200.00 | Rack of Upper and Lower Press Dies (BUYER MUST LOAD) |
| 73 | $200.00 | Rack of Upper and Lower Press Dies (BUYER MUST LOAD) |
| 74 | $2,700.00 | 1999 AMADA Model PEGA 345, 30 Ton CNC Turret Punch, s/n AQ450334, (58) turret stations, 51.4″x107″ table with (2) clamps, 2-position auto indexing, Amada Amadan-O4P-C controller, s/n E99504229, foot pedal and pedestal controls. (Meter Reads 52,549 Hours) (19,694 Cycle Hours) (19,175,061 Total Hits) (240 volt/3-phase) (Loading Fee $2,485/Loadout Date Tuesday 3/14/23) |
| 75 | $0.00 | 1989 AMADA Model PEGA 345, 30 Ton CNC Turret Punch, s/n AQ450032, (58) turret stations, 51.4″x107″ table with (2) clamps, (1) single station indexing, Amada Amadan-O4P-C controller, s/n 9044091, and foot pedal controls. (Meter Reads 64,963 Hours) (23,849 Cycle Hours) (Not Operating) (Loading Fee $2,485/Loadout Date Tuesday 3/14/23) |
| 76 | $450.00 | PEGA 345 Tooling and Cabinet (Cabinet A) (BUYER MUST LOAD) |
| 77 | $375.00 | PEGA 345 Tooling and Cabinet (Cabinet B) (BUYER MUST LOAD) |
| 78 | $450.00 | PEGA 345 Tooling and Cabinet (Cabinet C) (BUYER MUST LOAD) |
| 79 | $375.00 | PEGA 345 Tooling and Cabinet (Cabinet D) (BUYER MUST LOAD) |
| 80 | $2,100.00 | PEGA 345 Tooling and Cabinet (Cabinet E) (BUYER MUST LOAD) |
| 81 | $450.00 | PEGA 345 Tooling and Cabinet (Cabinet F) (BUYER MUST LOAD) |
| 82 | $375.00 | PEGA 345 Tooling and Cabinet (Cabinet G) (BUYER MUST LOAD) |
| 83 | $375.00 | PEGA 345 Tooling and Cabinet (Cabinet H) (BUYER MUST LOAD) |
| 84 | $0.00 | PEGA 345 Tooling and Cabinet (Cabinet I) (BUYER MUST LOAD) |
| 85 | $0.00 | PEGA 345 Tooling and Cabinet (Cabinet J) (BUYER MUST LOAD) |
| 86 | $0.00 | PEGA 345 Tooling and Cabinet (Cabinet K) (BUYER MUST LOAD) |
| 87 | $100.00 | THOMPSON Model B Hydraulic Controlled Automatic Surface Grinder, s/n 364681, 208 volt, 3-phase, equipped with 12″x36″ table and 24″ table travel. (Loading Fee $1,180/Loadout Date Monday 3/13/23) |
| 88 | $150.00 | HARIG Model 618W Horizontal Reciprocating Surface Grinder, Walker 6″x18″ electro-magnetic chuck. |
| 89 | $3,400.00 | HAEGER Model HP6-C 6 Ton Insertion Press, 18″ throat, foot pedal controls with Haeger model AF-CH auto feed loader, s/n 260 |
| 90 | $3,400.00 | HAEGER Model HP6-C, 6 Ton Insertion Press, s/n 02061, 18″ throat, foot pedal controls with Haeger model AF-CH auto feed loader, s/n 1060 |
| 90A | $175.00 | WILSON Tool Cabinet and Contents of Haeger Press Parts |
| 91 | $250.00 | 1964 FEDERAL Model No. 5, 60 Ton Mechanical Punch Press, s/n 5-1896, 10″ throat, 18.5″x29.5″ bed area, 90 spm, 2.5″ ram adjustment, 5 HP, and safety arms. (240 volt/3-phase) (Loading Fee $1,180/Loadout Date Tuesday 3/14/23) |
| 92 | $0.00 | JOHNSON/SOUTH BEND Model 45FW-AC, 45 Ton Punch Press, s/n 69084, equipped with 3″ stoke, 11-1/4″ shut height, 28″x18″ bed, 11-3/8 x 11-13/16 ram area, and 125 strokes per minute. (208 volt/3-phase) (Loading Fee $1,180/Loadout Date Tuesday 3/14/23) |
| 93 | $100.00 | 1972 ROUSSELLE Model 2G, 20 Ton Mechanical Gap Frame Press, s/n 714, 2″ stroke, 11″ shut height, 11″x16.5″ ram area, 90 spm, and foot controls. |
| 94 | $450.00 | Punch Dies, Contents of (3) Green Steel Shelving Units, and Wood Cabinet and Contents (BUYER MUST LOAD) |
| 95 | $450.00 | Flex Arm Pneumatic Tapping Machine and Table, 1/2″ diameter threading capacity |
| 96 | $10.00 | PERKINS Model Junior Bench Mounted Notcher, s/n 26234, 1/3 HP, 3″ throat, 10″x18″ bed, steel bench, controls. |
| 97 | $35.00 | DELTA ROCKWELL Vertical Band Saw, s/n 97-3290, 14″x14″ table, 13.5″x8″ throat, variable speed (110 volt/single phase) |
| 98 | $300.00 | CLICK PRESS Die Cutting Machine (220 volt) |
| 99 | $150.00 | (2) Arbor Presses and Table |
| 100 | $15.00 | DELTA ROCKWELL 4-Spindle Gang Drill Press, 1/2HP heads, 7.5″ throat, 21″x51″ production table, 4 speeds, (1) tapping head. (110 volt) |
| 101 | $80.00 | ROCKWELL Drill Press, 1/2″ chuck |
| 102 | $25.00 | CENTRAL MACHINERY Drill Press, with tapping head |
| 103 | $425.00 | Cabinet and (3) Benches, with drill bits, chucks, collets, and reamers |
| 104 | $120.00 | EXCELSIOR Manual Punch Press, pedal operated, with cabinet and contents of dies (BUYER MUST LOAD CABINET CONTENTS) |
| 105 | $2,000.00 | 2020 GEMA OptiFlex Pro B Powder Coating System, s/n 32801.01874, with gun. |
| 106 | $50.00 | GEMA Easy 1-B Powder Coat System, with guns |
| 107 | $5.00 | Dust Collector System |
| 108 | $170.00 | FALLS D-BUR-R Model 111 Finish Edge Deburring Machine, 36″ width, 24 gauge – 1/4″ (110 volt) |
| 109 | $160.00 | Dual Wheel Buffer/Grinder |
| 110 | $160.00 | Dual Wheel Buffer/Grinder |
| 111 | $160.00 | Dual Wheel Buffer/Grinder |
| 112 | $60.00 | Dual Wheel Buffer/Grinder |
| 113 | $10.00 | Dual Wheel Buffer/Grinder |
| 114 | $75.00 | Cabinet and Contents of Grinding Discs and Air Tools |
| 115 | $95.00 | (7) Rolling Carts and Table |
| 116 | $1,650.00 | SPIRATRON Model ST-12-M Roto Finish Vibratory Bowl Deburring Machine, 208 volt, 3-phase, equipped with 55″ diameter bowl and wash system. |
| 117 | $20.00 | GLOBE Slow Speed Electric Barrel Tumbler, with corncob media (110 volt/single phase) |
| 118 | $10.00 | Octagon Barrel Tumbler (220 volt/3-phase) |
| 119 | $30.00 | ROYSON Electric Parts Tumbler, throat 17″x10.5″ (110 volt/single phase) |
| 120 | $5.00 | 4BBL Octagon Electric Tumbler (208 volt, 3-phase) |
| 121 | $225.00 | KRAMER RSM Vibrating Shaker, with additional screens (110 volt) |
| 122 | $10.00 | Tabletop Tumbler (110 volt) |
| 123 | $70.00 | Granite Surface Plate, 48″x48″x10″, with steel base |
| 124 | $30.00 | Granite Surface Plate, 24″x36:x6:, on shop cart |
| 125 | $25.00 | Granite Surface Plate, 18″x24″ |
| 126 | $100.00 | (2 Boxes) Pin Gauge Sets, .061 – .500 |
| 127 | $100.00 | (2 Boxes) Pin Gauge Sets, .061 – .500 |
| 128 | $25.00 | (2 Boxes) Pin Gauge Sets, .061 – .500 |
| 129 | $150.00 | (2) 90 Degree Squares, Block Gauge Set, Thread Gauge Set, and Radius Gauge |
| 130 | $140.00 | (3) Digital Calipers and Digital Height Gauge |
| 131 | $130.00 | (3) Caliper Gauges |
| 132 | $130.00 | Height Gauges, Dial Calipers, Angle Gauge, and Depth Gauge |
| 133 | $5.00 | (7) File Cabinets, (2) Desks and Chairs, (1) Table (Located in Quality Control Room) (BUYER MUST LOAD) |
| 134 | $3,100.00 | Sheet Metal Stock Inventory of Stainless Steel, Aluminum, Steel and Galvanized (See Photos For Detailed Inventory) |
| 135 | $3,200.00 | Pallet Racking and Contents of: (17 Skids) Sheet Metal and Plate of Stainless, Aluminum, and Carbon Steel (BUYER MUST DISMANTLE PALLET RACKING) |
| 136 | $475.00 | Pallet Rack Section and Contents of Sheet Metal, Angle and Flat Bar Stock, and Pipe (BUYER MUST DISMANTLE PALLET RACKING) |
| 137 | $650.00 | Steel Rack and Contents of Angle Steel, Square Tube, Flat Bar and Piano Hinge Stock (BUYER MUST LOAD) |
| 138 | $120.00 | Pallet Racking, Unassembled, (3) Uprights, and (30+/-) Crossmembers |
| 139 | $75.00 | TEMCO Stepdown Transformer, 112.5KVA, primary 240 Delta, secondary 220Y/127, 780 lb weight |
| 140 | $500.00 | JEFFERSON Stepdown Transformer, 112.5KVA, primary 480 Delta, secondary 240 Delta, 678 lb weight |
| 141 | $375.00 | FEDERAL PACIFIC Model 368 Step-Down Dry Transformer, 75KVA, 3-phase, primary 240 volt, secondary 208 Y/120 volts, weight 490 lbs |
| 142 | $25.00 | CLAUSING Model 2286 Variable Speed Drill Press, equipped with 5/8″ chuck, 20″x42″ table (208 volt/3-phase) |
| 143 | $2.00 | Barrel Tumbler |
| 144 | $20.00 | (2) Water Fountains |
| 145 | $175.00 | (10) Pneumatic Pop Rivet Guns |
| 146 | $350.00 | Air Tools: Drills, Sanders, and Punch |
| 147 | $70.00 | AVDEL Pneumatic Speed Fastener and BOLLHOFF Blind Rivet Nut Installation Tool |
| 148 | $5.00 | (2) BOSTITCH Pneumatic Staplers and PASLODE Stapler |
| 149 | $5.00 | (3) Drills and Electric Screwdriver |
| 150 | $30.00 | GSE 574 Digital Platform Scale |
| 151 | $25.00 | UNUSED Vacuum Pump |
| 152 | $25.00 | ULINE Bag Sealer and Bag Material |
| 153 | $5.00 | Shop Bench and (3) 36″x36″ Benches |
| 154 | $5.00 | BOSTITCH FC95EC Industrial Packaging Stapler |
| 155 | $75.00 | Tool Cart and Contents |
| 156 | $20.00 | Coil Dispenser and Material |
| 157 | $20.00 | Banding Cart and Plastic Banding Material |
| 158 | $20.00 | Banding Cart and tools (No Banding Material) |
| 159 | $40.00 | Banding Cart and tools and Plastic Banding Material |
| 160 | $45.00 | Plastic Banding Material |
| 161 | $5.00 | (2) Shop Vacs |
| 162 | $15.00 | Platform Scale |
| 163 | $5.00 | Coil Stand and (2) Coil Dispensers |
| 164 | $105.00 | Pyramid Roller and Adjustable Height Table |
| 165 | $80.00 | Pallet Jack |
| 166 | $80.00 | Pallet Jack |
| 167 | $55.00 | Adjustable Stands |
| 168 | $110.00 | Platform Cart |
| 169 | $110.00 | (2) Platform Carts |
| 170 | $150.00 | (2) Platform Carts |
| 171 | $55.00 | Material Hoist, manual jack |
| 172 | $100.00 | WESCO Material Hoist, manual jack |
| 173 | $65.00 | (2) Barrel Carts and (3) Hand Trucks |
| 174 | $40.00 | Plywood Cart |
| 175 | $30.00 | Steel Table and Crate of Trolleys |
| 176 | $30.00 | (5) Fans |
| 177 | $160.00 | (2) Pedestal Shop Fans |
| 178 | $160.00 | (2) Pedestal Shop Fans |
| 179 | $160.00 | (2) Pedestal Shop Fans |
| 180 | $85.00 | (2) Pedestal Shop Fans |
| 181 | $15.00 | Blue Steel Rack and Contents, Roller Table Section, Steel Table, Green Steel Rack (along rear wall), and Metal Cabinet (BUYER MUST LOAD) |
| 182 | $1,000.00 | Contents of Back Room of Shelving and Fastening Hardware (BUYER MUST LOAD) |
| 183 | $195.00 | (2) Metal Cabinets |
| 184 | $30.00 | Steel Shop Table, 36″x60″ |
| 185 | $20.00 | (14) Steel Stands, 36″x36″ |
| 186 | $45.00 | Steel Material Table, Shop Table, and Shelves |
| 187 | $10.00 | Shop Table, File Cabinet, Wood Table, with vise |
| 188 | $1,700.00 | Contents of (2) Back Rooms (through breakroom) (BUYER MUST LOAD) |
| 189 | $10.00 | Contents of Breakroom: Refrigerator, Vending Machine, Microwave, Tables, and Desk (BUYER MUST LOAD) |
| 190 | $50.00 | SAFETY KLEEN Parts Washer |
| 191 | $20.00 | NORDSON EC3400 Powder Coating Filtration System and Filters |
| 192 | $300.00 | (2 Sections) Pallet Racking (BUYER MUST DISMANTLE) |
| 193 | $5.00 | (2) 1,000 Gallon Poly Tanks |
| 194 | $5.00 | (4) Circulating Pumps and Submersible Pump |
| 195 | $60.00 | (3 Sections) Pallet Racking (BUYER MUST DISMANTLE) |
| 196 | $30.00 | (3) Rolling Carts, (5) Steel Tables, and Contents of Wood Shelf |
| 197 | $80.00 | (200+/-) 35″x46″ Wood Pallets |
| 198 | $3,000.00 | (40+/-) Collapsible Steel Wire Pallet Boxes |
| 199 | $5.00 | HP DesignJet 800 Blueprint Copier (BUYER MUST LOAD) |
| 200 | $10.00 | LEXMARK CX310N Copier and CANNON MX922 Scanner/Copier/Fax (BUYER MUST LOAD) |
| 201 | $15.00 | 8′ Conference Table and (4) Swivel Chairs (BUYER MUST LOAD) |
| 202 | $60.00 | (12) 4-Drawer File Cabinets (BUYER MUST LOAD) |
| 203 | $1.00 | (2) Wood Desks and Chairs, Table, and Bookshelf (BUYER MUST LOAD) |
| 204 | $25.00 | 42″ Round Table, (6) Chairs, (2) Desks, with returns, and Bookshelf (BUYER MUST LOAD) |
| 205 | $310.00 | (7) 3-Drawer Lateral File Cabinets and (2) 5-Drawer File Cabinets (BUYER MUST LOAD) |
| 206 | $110.00 | Contents of Office: Workstation Desk, Lateral File, and Bookshelf (BUYER MUST LOAD) |
| 207 | $5.00 | Contents of Office: Round Table, (6) Chairs, and Partition (BUYER MUST LOAD) |
| 208 | $100.00 | Contents of Lobby and Back Office: Credenza, (2) Chairs, (2) File Cabinets, Desk, Chairs, and Partitions (BUYER MUST LOAD) |
| 209 | $5.00 | Workstation Desk, Lateral File, Bookshelf, Wood Desk and Chair (BUYER MUST LOAD) |
| 210 | $40.00 | (8) 4-Drawer File Cabinets (BUYER MUST LOAD) |