1440 Cowpath Rd. Hatfield, Pa 19440 
215 361-9099
Auction Results
S.E. Incorporated
Transmission Power Line Contractor
Tues., June 10th, Wed., June 11th, & Thurs. June 12th
Deaver, WY • Nunn, CO • Quartzsite, AZ
ABSOLUTE AUCTION
NOTICE: S.E., Inc. has been providing the very best in Transmission Powerline Construction for over (40) years throughout the Western United States. Brothers Mark, Steve, David, and Craig Sorenson have decided to retire and pursue other interests. Everything in the auction is owned by S.E., Incorporated Charitable Remainder Annuity Trust and will positively sell to the highest bidder without minimum or reserve!
PA Auction License No: AY000281
| Lot # | Price | Description |
| 1 | $2,500.00 | 2014 JOHN DEERE Model 825i Gator, 4×4 ATV, s/n 1M0825GELEM084356, powered by gas engine and direct drive, equipped with 4′ aluminum power dumping flatbed, canopy, 27×9-14 front and 27×11-14 rear tires. In good condition with good tires. (Odometer Reads 6,866 Miles) (Unit# 242) (DAY 1) (WY) |
| 2 | $41,000.00 | 2022 FORD Model F-250 Lariat Super Duty 4×4 Crew Cab Pickup Truck, VIN# 1FT8W2BT4NEE82597, powered by Powerstroke 6.7L diesel engine and automatic transmission, equipped with FX4 off road package, 8′ bed with gooseneck hitch, cross tool box, power running boards, power package, navigation system, and tow package. In good condition. (Odometer Reads 80,381 Miles) (Unit# 100) (DAY 1) (CO) |
| 3 | $36,500.00 | 2022 CHEVROLET Model 3500HD High Country, 4×4 Crew Cab Pickup Truck, VIN# 1GC4YVEYXNF172949, powered by Duramax 6.6L diesel engine and Allison automatic transmission, equipped with Z71 off road package, 8′ bed, fuel tank with electric pump, cross tool box, power package, sunroof, front brush guard, tow package, 5th wheel hitch, and power running boards. In good condition with good tires. (Odometer Reads 131,334 Miles) (Unit# 196) (DAY 1) (AZ) |
| 4 | $31,000.00 | 2019 FORD Model F-350 Lariat Super Duty, 4×4 Crew Cab Pickup Truck, VIN# 1FT8W3BT5KEG74158, powered by Powerstroke 6.7L diesel engine and automatic transmission, equipped with FX4 off road package, 7′ bed, power package, navigation system, front brush guard, tow package, running boards, leather seats, cruise control, air conditioning, and 275/70R18 tires. In good condition with good tires. (Odometer Reads 145,265 Miles) (Unit# 191) (DAY 1) (WY) |
| 5 | $14,000.00 | 2017 CHEVROLET Model 2500HD, 4×4 Crew Cab Pickup Truck, VIN# 1GC1KUEY4HF214728, powered by Duramax 6.6L diesel engine and automatic transmission, equipped with 8′ bed with gooseneck hitch, cross tool box, cab protector, front brush guard, tow package, running boards, power package, cruise control, air conditioning, and 265/70R17 tires. In good condition with good tires. (Odometer Reads 109,304 Miles) (Unit# 195) (DAY 1) (CO) |
| 6 | $8,500.00 | 2017 CHEVROLET Model 2500HD LTZ, 4×4 Crew Cab Pickup Truck, VIN# 1GC1KWEYXHF149248, powered by Duramax 6.6L diesel engine and Allison automatic transmission, equipped with Z71 off road package, 7′ bed, power package, front brush guard, tow package, tool boxes, 5th wheel hitch, leather seats, and running boards. In good condition with good tires. (Odometer Reads 255,886 Miles) (Unit# 187) (DAY 1) (WY) |
| 7 | $8,500.00 | 2016 CHEVROLET Model 2500HD LTZ, 4×4 Crew Cab Pickup Truck, VIN# 1GC1KWE80GF177316, powered by Duramax 6.6L diesel engine and Allison automatic transmission, equipped with Z71 off road package, 8′ bed, (2) fuel tanks with electric pumps, cross tool box, power package, navigation system, cab protector, front brush guard, tow package, 5th wheel hitch, and running boards. In good condition. (Odometer Reads 187,578 Miles) (Unit# 179) (DAY 1) (AZ) |
| 8 | $10,500.00 | 2012 RAM Model 2500HD, 4×4 Crew Cab Pickup Truck, VIN# 3C6UD5CL0CG177535, powered by Cummins 6.7L diesel engine and automatic transmission, equipped with 6’6″ bed with gooseneck hitch, cross tool box, fuel tank with electric pump, cab protector, front brush guard, running boards, tow package, cruise control, air conditioning, and 245/75R17 tires. In good condition with good tires. (Odometer Reads 164,559 Miles) (Unit# 177) (DAY 1) (CO) |
| 9 | $3,000.00 | 2012 DODGE Model 1500, 4×4 Pickup Truck, VIN# 3C6JD7DTXCG257907, powered by Hemi 5.7L gas engine and automatic transmission, equipped with 8′ bed, cab protector, cross tool box, tow package, cruise control, air conditioning, and 265/70R17 tires. In good condition with fair to good tires. (Odometer Reads 166,682 Miles) (Unit# 102) (DAY 1) (WY) |
| 10 | $60,000.00 | 2022 FORD Model F-450 Lariat, 4×4 Crew Cab Flatbed/Utility Truck, VIN# 1FT8W4DT5NEC30947, powered by Powerstroke 6.7L diesel engine and automatic transmission, equipped with 8’6″ steel flatbed with integrated utility boxes, and fuel tank with electric pump, gooseneck hitch, dual rear wheels, Warn 16.5ti bumper winch, front brush guard, navigation system, leather interior, power package, tow package, running boards, cruise control, air conditioning, and 225/70R19.5 tires. In good condition with good tires. (Odometer Reads 76,734 Miles) (Unit# 199) (DAY 1) (CO) |
| 11 | $16,500.00 | 2020 CHEVROLET Model 3500HD, 4×4 Crew Cab Flatbed/Utility Truck, VIN# 1GC4YSEY0LF182787, powered by Duramax 6.6L diesel engine and Allison automatic transmission, equipped with 9′ aluminum flatbed with gooseneck hitch, utility boxes, 90 gallon split fuel tank (70 gallon diesel and 20 gallon gas) with electric pumps, front brush guard, tow package, cruise control, air conditioning, and 275/70R18 tires. In good condition with good tires. (Odometer Reads 157,774 Miles) (Unit# 194) (DAY 1) (WY) |
| 12 | $18,500.00 | 2019 CHEVROLET Model 2500HD LT, 4×4 Crew Cab Flatbed Truck, VIN# 1GC1KSEY1KF260500, powered by Duramax 6.6L diesel engine and Allison automatic transmission, equipped with 7′ steel bed, headache rack, tool boxes, power package, gooseneck hitch, running boards, and tow package. In good condition with good tires. (Odometer Reads 107,411 Miles) (Unit# 197) (DAY 1) (AZ) |
| 13 | $5,000.00 | 2014 RAM Model 3500HD, 4×4 Crew Cab Flatbed Truck, VIN# 3C63R3GL3EG119918, powered by Cummins 6.7L turbo diesel engine and automatic transmission, equipped with 8′ steel flatbed, (2) fuel tanks with electric pumps, utility box, front brush guard, tow package, 5th wheel hitch, strobes, and running boards. In fair to good condition with fair to good tires. (Odometer Reads 246,553 Miles) (Unit# 178) (DAY 1) (AZ) |
| 14 | $3,250.00 | 2013 FORD F-250 Lariat Super Duty 4×4 Crew Cab Flatbed Truck, VIN# 1FT7W2BT1DEA67845, powered by Powerstroke 6.7L diesel engine and automatic transmission, equipped with 7′ steel flatbed with gooseneck hitch, aluminum front brush guard, tow package, running boards, cruise control, air conditioning, and 275/6520 tires. In good condition with fair tires. (Odometer Reads 308,247 Miles) (Emissions Altered) (Unit# 175) (DAY 1) (WY) |
| 15 | $4,750.00 | 2011 GMC Model 3500HD, 4×4 Crew Cab Flatbed Truck, VIN# 1GT422C84BF194007, powered by Duramax 6.6L diesel engine and Allison automatic transmission, equipped with 8′ flatbed with gooseneck hitch, fuel tank with electric pump, utility box, aluminum front brush guard, tow package, cruise control, air conditioning, and 275/80R18 tires. In good condition with good tires. (Odometer Reads 263,373 Miles) (Unit# 168) (DAY 1) (WY) |
| 16 | $7,000.00 | 2008 DODGE Model 2500HD SXT, 4×4 Crew Cab Flatbed Truck, VIN# 3D7KS28A78G189738, powered by Cummins 6.7L diesel engine and automatic transmission, equipped with 8’6″ flatbed with gooseneck hitch, front brush guard, tow package, cruise control, air conditioning, and 265/70R17 tires. In good condition with fair tires. (Odometer Reads 236,100 Miles) (Emissions Altered) (Slight Body Damage) (Unit# 162) (DAY 1) (WY) |
| 17 | $12,500.00 | 2008 STERLING Model 55 Bullet, 4×4 Flatbed Truck, VIN# 3F6WK76A78G352383, powered by Cummins 6.7L turbo diesel engine and 6 speed transmission, equipped with 9′ steel flatbed, material rack, front hydraulic winch, dual rear wheels, 5th wheel hitch, and tow package. In fair to good condition with fair to good tires. (Odometer Reads 102,346 Miles) (Emissions Altered) (Unit# 164) (DAY 1) (AZ) |
| 18 | $6,500.00 | 2007 DODGE Model 2500HD, 4×4 Crew Cab Flatbed Truck, VIN# 3D7KS28A97G855433, powered by Cummins 6.7L diesel engine and automatic transmission, equipped with 8′ steel flatbed with gooseneck hitch, front brush guard, tow package, running boards, and 265/70R17 tires. In fair to good condition with fair tires. (Odometer Reads 235,223 Miles) (Emissions Altered) (Unit# 172) (DAY 1) (WY) |
| 19 | $5,500.00 | 2007 DODGE Model 2500HD, 4×4 Crew Cab Flatbed Truck, VIN# 3D7KS28A57G817844, powered by Cummins 6.7L turbo diesel engine and automatic transmission, equipped with 8′ steel flatbed with gooseneck hitch, (2) fuel tanks with electric pumps, cross tool box, front brush guard, and tow package. In fair to good condition with fair to good tires. (Odometer Reads 229,180 Miles) (Unit# 174) (DAY 1) (AZ) |
| 20 | $7,000.00 | 2001 DODGE Model 3500, 4×4 Flatbed Truck, VIN# 3B6MF36601M560181, powered by Cummins diesel engine and 5 speed transmission, equipped with 10’6″ flatbed with gooseneck hitch, material rack (over cab), front bumper winch with capstan shaft and butterfly, dual rear wheels, tow package, and 235/85R16 tires. In fair to good condition with fair to good tires. (Odometer Reads 91,016 Miles) (Unit# 137) (DAY 1) (WY) |
| 21 | $7,000.00 | 2001 DODGE Model 3500, 4×4 Flatbed Truck, VIN# 3B6MF36611M525097, powered by Cummins turbo diesel engine and 5 speed transmission, equipped with 9′ flatbed, material rack, Braden front winch, front brush guard, dual rear wheels, tow package, cruise control, air conditioning, and 235/85R16 tires. In fair to good condition with fair to good tires. (Odometer Reads 115,421 Miles) (Unit# 132) (Driver Side Door Damage) (DAY 1) (CO) |
| 22 | $7,000.00 | 2000 DODGE Model 3500, 4×4 Flatbed Truck, VIN# 3B6MF3663YM228696, powered by Cummins turbo diesel engine and 5 speed transmission, equipped 9′ steel flatbed with gooseneck hitch, fuel tank with electric pump, front PTO winch, front brush guard, dual rear wheels, and tow package. In fair good condition with good tires. (Odometer Reads 243,468 Miles) (Unit# 170) (DAY 1) (AZ) |
| 23 | $7,000.00 | 2000 DODGE Model 3500SLT, 4×4 Flatbed Truck, VIN# 3B6MF3666YM228904, powered by Cummins diesel engine and 5 speed transmission, equipped with 10′ steel flatbed, fuel tank with electric pump, utility boxes, dual rear wheels, tow package, and 235/85R16 tires. In fair condition with fair tires. (Odometer Reads 280,715 Miles) (Unit# 160) (DAY 1) (WY) |
| 24 | $4,500.00 | 1993 FORD Model F350XL, 4×4 Flatbed Truck, VIN# 2FDKF38M5PCB35571, powered by diesel engine and 5 speed transmission, equipped with 11′ flatbed with gooseneck hitch, dual rear wheels, tow package, and 215/85R tires. In good condition with fair tires. (Odometer Reads 55,235 Miles) (Unit# 198) (DAY 1) (WY) |
| 25 | $15,250.00 | 2017 RAM Model 2500HD Laramie, 4×4 Crew Cab Utility Truck, VIN# 3C6UR5KL6HG715942, powered by Cummins 6.7L diesel engine and automatic transmission, equipped with NorthStar 8’6″ utility body with built in fuel tank with electric pump, power package, navigation system, front brush guard, tow package, running boards, leather seats, cruise control, air conditioning, and 275/70R18 tires. In good condition with good tires. (Odometer Reads 199,870 Miles) (Emissions Altered) (Unit# 190) (DAY 1) (WY) |
| 26 | $6,000.00 | 2016 GMC Model 2500HD, 4×4 Crew Cab Utility Truck, VIN# 1GT12SE8XGF287542, powered by Duramax 6.6L diesel engine and automatic transmission, equipped with CM 8’6″ utility body with gooseneck hitch, aluminum front brush guard, tow package, power package, cruise control, and air conditioning. In good condition with good tires. (Odometer Reads 340,856 Miles) (Emissions Altered) (Air Bags Removed) (Unit# 186) (DAY 1) (WY) |
| 27 | $3,000.00 | 2012 FORD Model F-250XL Super Duty 4×4 Extended Cab Utility Truck, VIN# 1FT7X2B60CEC22293, powered by 6.2L gas engine and automatic transmission, equipped with AmeriTech 8′ open utility body, front brush guard, tow package, and 265/70R17 tires. In fair to good condition with fair to good tires. (Odometer Reads 268,074 Miles) (Unit# 103) (DAY 1) (WY) |
| 28 | $5,000.00 | 2022 EAST TEXAS TRAILERS Tandem Axle Fuel Trailer, VIN# 58SBT1020NE028009, equipped with 990 gallon diesel tank and solar/electric 12 volt pump. In very good condition with good tires. (Unit# 268) (DAY 1) (AZ) |
| 29 | $6,500.00 | 2021 LOAD TRAIL Tandem Axle Dump Trailer, VIN# 4ZEDT1422M1222609, equipped with 8’x14′ steel dump body, folding sides, 14,000# GVWR, and ball hitch. In good condition with good tires. (Unit# 859) (DAY 1) (AZ) |
| 30 | $4,250.00 | 2005 TITAN Tandem Axle Gooseneck Dump Trailer, VIN# 4TGF1420351035307, equipped with 7’x14′ steel dump body with swing gate, 14,000# GVWR, spring suspension, and 235/85R16 tires. In fair to good condition with good tires. (Unit# 848) (DAY 1) (WY) |
| 31 | $4,250.00 | 2005 HAULMARK Model TH85X24WT3, 8’6″ x 24′ Tandem Axle Enclosed Cargo Trailer, VIN# 16HGB242X5U043302, equipped with curbside and rear fold down doors, 10,000# GVWR, and 225/75R15 tires. In fair to good condition with good tires. (Unit# 815) (DAY 1) (CO) |
| 32 | $500.00 | 1999 PACE 4′ x 6′ Single Axle Enclosed Cargo Trailer, VIN# 4P2FB0618XU015968, equipped with rear swing door and 2,000# GVWR. In good condition. (Unit# 260) (DAY 1) (CO) |
| 33 | $300.00 | 1965 DELPHI Single Axle Enclosed Hot Stick Trailer, VIN# 1252, equipped with 4’x16’x3′(H) steel enclosure and 6.50-16 tires. In fair condition with good tires. (Unit# 275) (DAY 1) (WY) |
| 34 | $1,750.00 | 2002 PJ Tandem Axle Tag-A-Long Trailer, VIN# 4P5CF202021046861, equipped with 7’x20′ level deck, slide out ramps, and 235/85R16 tires. In good condition with good tires. (Unit# 847) (DAY 1) (AZ) |
| 35 | $3,750.00 | 1999 HEWCO Tandem Axle Tilt Deck Tag-A-Long Trailer, VIN# 1H9CT2022XL267269, equipped with 80″ x 4′ stationary level deck, 16′ tilt section, spring suspension, ball hitch, and 235/85R16 tires. In good condition with good tires. (Unit# 857) (DAY 1) (WY) |
| 36 | $1,100.00 | 1997 HULL Tandem Axle Tag-A-Long Trailer, VIN# 438FH1627VS103734, equipped with 6’10” x 16′ level deck and 6′ steel ramps. In good condition with good tires. (Unit# 274) (DAY 1) (AZ) |
| 37 | $1,600.00 | 1993 CLIFTON Tri-Axle Tag-A-Long Trailer, VIN# 93101845, equipped with 8’x26′ mesh covered steel deck, spring suspension, and 9R17.5 tires. In fair to good condition with fair tires. (Unit# 643) (DAY 1) (WY) |
| 38 | $1,550.00 | 2008 Shop Made Tandem Axle Water Trailer, VIN# GC13178, equipped with 700 gallon poly tank, 2″ water pump w/gas engine, 6′ x 12′ deck, and 9.50-16.5. In good condition with good tires. (No VIN# Plate) (Unit# 639) (DAY 1) (WY) |
| 39 | $2,000.00 | 2001 PARIS Tandem Axle Gooseneck Trailer, VIN# 154GN25261T005019, equipped with 8’x20′ level deck and 5′ beavertail, ramps, and 235/80R16 tires. In fair condition with good tires. (No VIN# Plate) (Unit# 846) (DAY 1) (AZ) |
| 40 | $1,700.00 | 1999 TEMCO Tandem Axle Gooseneck Trailer, VIN# 18430G100X0709640, equipped with 8′ x 30′ steel deck and 235/85R16 tires. In fair to good condition with good tires. (No VIN# Plate) (Unit# 856) (DAY 1) (CO) |
| 41 | $3,600.00 | 1994 PJ Tandem Axle Gooseneck Trailer, VIN# 4P5GF2525R1111045, equipped with 8′ x 20′ level deck, 5’6″ beavertail, ramps, spring suspension, and 235/85R16 tires. In good condition with fair tires. (No VIN# Plate) (Unit# 842) (DAY 1) (CO) |
| 42 | $2,750.00 | 1997 Shop Made Tandem Axle Gooseneck Trailer, VIN# 362281, equipped with 8’x24′ level deck, pull-out ramps, spring suspension, and 235/85R16 tires. In good condition with good tires. (No VIN# Plate) (Unit# 844) (DAY 1) (WY) |
| 43 | $2,200.00 | 1971 Homemade Tandem Axle Gooseneck Storage Trailer, VIN# 262775, equipped with rear swing doors and shelving, and 8×14.5 tires. In fair condition with very good tires. (Unit# 841) (DAY 1) (WY) |
| 43A | $2,100.00 | 2000 Shop Made Tri-Axle Gooseneck Storage Trailer, VIN# S40296W, equipped with 22′ aluminum storage body with rollup rear door, shelves, cabinets, bolt bins, and lighting, 6′ upper deck, torsion suspension, and 235/85R16 tires. In good condition with good tires. (VIN# From Registration) (Unit# 845) (DAY 1) (CO) |
| 44 | $16,500.00 | 2005 NEW HOLLAND Model TC45DA, 4×4 Utility Tractor, s/n G602317, powered by New Holland 45HP diesel engine and hydrostatic transmission, equipped with model 17LA loader attachment with general purpose loader bucket, manual front coupler, 3-point hitch, PTO, rollbar, (1) hydraulic circuit, 10-16.5 front and 17.5-24 rear tires. In good condition with good tires. (Meter Reads 00,868 Hours) (Unit# 281) (DAY 1) (WY) (Sales Tax) |
| 45 | $3,750.00 | 2005 SCHMEISER Model VD72PW, 72″ Seed Drill Attachment, s/n 25500844, 10 row, with transport wheels, 3-point hitch. In good condition. (No Serial Number Plate) (Unit# 280) (DAY 1) (WY) (Sales Tax) |
| 45A | $900.00 | FRONTIER 72″ Brush Mower, s/n 1XFRC20XKG0072334, PTO/3-point hitch (DAY 1) (WY) (Sales Tax) |
| 45B | $150.00 | BUHLER C72SS, 72″ Backfill Blade, s/n 25500844, 3-point hitch (DAY 1) (WY) (Sales Tax) |
| 45C | $1,800.00 | 84″ Drag Attachment (DAY 1) (WY) (Sales Tax) |
| 46 | $2,450.00 | 1989 FORD Model 250C Trencher Tractor, s/n BD00418, powered by 4 cylinder diesel engine and direct drive transmission, equipped with Auburn GFB86H, 8′ trencher, s/n 5161, Auburn 6-way backfill blade, ROPS post, 7.50-16 front and 16.9-24 rear tires. In good condition with fair to good tires. (Meter Reads 0,634 Hours) (Unit# 464) (DAY 1) (WY) (Sales Tax) |
| 47 | $1,700.00 | 1979 FORD 4×2 Trencher Tractor, s/n C628116, powered by diesel engine and direct drive transmission, equipped with Auburn GFB85H 8′ trencher, s/n 4587, 6-way backfill blade, canopy and 7.50-16 front and 16.9-24 rear tires. In fair condition with fair tires. (Meter Reads 3,200 Hours) (Unit# 462) (DAY 1) (CO) |
| 48 | $10,000.00 | 2007 AICHI Model SR18AJ/ISR60J, 60′ Crawler Aerial Lift, s/n 704160, powered by Isuzu 4 cylinder diesel engine and hydraulic drive, equipped with 3-section boom, leveling and rotating 30″ x 96″ man basket, leveling jib, 500# capacity, and 20″ TBG pads with rubber inserts. In good condition with very good undercarriage. (Meter Reads 4,346 Hours) (Unit# 366) (DAY 1) (AZ) |
| 49 | $2,500.00 | 2002 GENIE Model S-125, 125′, 4×4 Aerial Lift, s/n S125-704, powered by Cummins 4 cylinder diesel engine and hydrostatic transmission, equipped with 34″ x 94″ man/material basket, 500# capacity, hydraulic expandable axles and 445/65 R22.5 foam filled tires. In fair to good condition with good tires. (Meter Reads 2,356 Hours) (Needs New Mother Board) (Axles Extend – Do Not Retract) (From Platform Controls – Steers, Travels, and Jib Functions From Lower Controls – All Functions Operate Except Boom Extension) (Unit# 308) (DAY 1) (CO) |
| 50 | $5,000.00 | 1999 JLG Model 450A, 45′, 4×4 Aerial Lift, s/n 0927440300042162, powered by Deutz 3 cylinder diesel engine and hydrostatic transmission, equipped with man/material basket, 500# capacity, and 33×15.50-16.5 tires. In fair to good condition with good tires. (Meter Reads 5,147 Hours) (Unit# 304) (DAY 1) (WY) (Sales Tax) |
| 52 | $16,500.00 | 2013 GEHL Model DL12-40H, 12,000# Telescopic Rough Terrain Forklift, s/n DL1240HJE0151038, powered by JD diesel engine and powershift transmission, equipped with 60″ forks, 3-section boom, 40′ lift height, enclosed cab with air conditioning, and 14.00-24 tires. In good condition with (1) very good and (3) good tires. (Meter Reads 06,130 Hours) (Unit# 240) (DAY 1) (WY) (Sales Tax) |
| 53 | $18,500.00 | 2004 XTREME Model XRN1145, 11,000# Telescopic Rough Terrain Forklift, s/n XRN1145120439177, powered by Perkins diesel engine and powershift transmission, equipped with 60″ forks, 3-section boom, 45′ lift height manual coupler, front hydraulic outriggers, open canopy, and 15.5-25 tires. In good condition with very good tires. (Meter Reads 4,625 Hours) (Unit# 241) (DAY 1) (CO) |
| 54 | $11,000.00 | 1998 LULL Model 10K42, 10,000# Telescopic Rough Terrain Forklift, s/n 98AD21P20114, powered by Cummins diesel engine and powershift transmission, equipped with 60″ forks, 3-section boom, 42′ lift height, manual coupler, auxiliary hydraulics, front hydraulic outriggers, canopy, and 17.5-25 tires. In good condition with good tires. (Meter Reads 5,000 Hours) (Unit# 224) (DAY 1) (AZ) |
| 55 | $7,750.00 | 1999 JCB Model 508C, 8,000# Telescopic Rough Terrain Forklift, s/n 0586064, powered by 4 cylinder diesel and shuttle, equipped with 48″ forks, 3-section boom, manual coupler, auxiliary hydraulics, enclosed cab, and 13.00-24 tires. In fair to good condition with good tires. (Meter Reads 9,087 Hours) (Unit# 237) (DAY 1) (CO) |
| 56 | $7,750.00 | 2001 LULL Model 644B-42, 6,000# Telescopic Rough Terrain Forklift, s/n 01Z21N221602, powered by Cummins diesel engine and powershift transmission, equipped with 48″ forks, 3-section boom, 42′ lift height, open canopy, and 13.00-24 tires. In good condition with good tires. (Meter Reads 3,788 Hours) (Unit# 238) (DAY 1) (WY) (Sales Tax) |
| 57 | $7,000.00 | 2001 JCB Model 520, 4,400# Telescopic Rough Terrain Forklift, s/n 0881504, powered by Perkins diesel engine and shuttle transmission, equipped with 41″ forks, 2-section boom, 16.4′ lift height, open canopy, and 10.5/80-18 tires. In fair to good condition with fair to good tires. (Meter Reads 2,420 Hours) (Unit# 233) (DAY 1) (AZ) |
| 58 | $9,500.00 | 1986 CATERPILLAR Model V225B, 22,500# Pneumatic Tired Forklift, s/n 70Y00288, powered by Cat 3208 diesel engine and powershift transmission, equipped with 92″ forks, 218″ 2-stage mast, hydraulic side shift, FOPS canopy, and 11R22.5 tires. In good condition with good tires. (Meter Reads 05,182 Hours) (Unit# 231) (DAY 1) (WY) (Sales Tax) |
| 59 | $30,000.00 | 2019 KUBOTA Model SVL95-2S Crawler Skid Steer Loader, s/n 45522, powered by Kubota diesel engine and hydrostatic transmission, equipped with 81″ general purpose loader bucket, hydraulic coupler, auxiliary hi-flow hydraulics, enclosed cab with air conditioning, and 18″ rubber tracks. In good condition with good undercarriage. (Meter Reads 1,302 Hours) (Unit# 459) (DAY 1) (AZ) |
| 60 | $36,000.00 | 2017 KUBOTA Model SVL95-2S Crawler Skid Steer Loader, s/n 36415, powered by Kubota diesel engine and hydrostatic transmission, equipped with 81″ general purpose loader bucket, hydraulic coupler, auxiliary hi-flow hydraulics, enclosed cab with air conditioning, and 18″ rubber tracks. In good condition with fair to good tracks. (Meter Reads 1,262 Hours) (Unit# 458) (DAY 1) (WY) (Sales Tax) |
| 61 | $27,500.00 | 2018 JCB Model 3TS-8T Teleskid Crawler Skid Steer Loader, s/n GEO3TSTREJ2768783, powered by JCB diesel engine and hydrostatic transmission, equipped with 78″ general purpose loader bucket, telescopic boom, side entry, hydraulic coupler, auxiliary hydraulics, enclosed cab with air conditioning, and 18″ rubber tracks. In good condition with good tracks. (Meter Reads 3,464 Hours) (Unit# 460) (DAY 1) (AZ) |
| 62 | $7,250.00 | 2013 TEREX Model TSR50 Skid Steer Loader, s/n ASVSR050C3WS00466, powered by Perkins 4 cylinder diesel engine and hydrostatic transmission, equipped with 68″ general purpose loader bucket, auxiliary hydraulics, manual coupler, open canopy, and 10-16.5 foam filled tires. In good condition with fair to good tires. (Meter Reads 00,992 Hours) (Unit# 455) (DAY 1) (WY) (Sales Tax) |
| 63 | $8,250.00 | 2006 ASV Model RC60 Positrack Crawler Skid Steer Loader, s/n RSE01910, powered by diesel engine and hydrostatic transmission, equipped with 68″ general purpose loader bucket, manual coupler, auxiliary hydraulics, enclosed cab (no door) with air conditioning, and 15″ rubber tracks. In good condition with fair tracks (Meter Reading N/A – Not Operational) (Unit# 450) (DAY 1) (WY) (Sales Tax) |
| 64 | $10,000.00 | 2006 CATERPILLAR Model 236B Skid Steer Loader, s/n HEN03997, powered by Cat diesel engine and hydrostatic transmission, equipped with 68″ general purpose loader bucket, hydraulic coupler, auxiliary hydraulics, ROPS canopy, and 12-16.5 tires. In good condition with good tires. (Meter Reads 3,960 Hours) (Unit# 451) (DAY 1) (CO) (RESERVED FOR USE DURING LOADOUT UNTIL THURS., JUNE 19TH AT 12:00 NOON) |
| 65 | $400.00 | BRADCO 60″ Fork Attachment (Skid Steer) (DAY 1) (AZ) |
| 66 | $600.00 | BRADCO 48″ Fork Attachment (Skid Steer) (DAY 1) (WY) (Sales Tax) |
| 67 | $700.00 | CAT 48″ Fork Attachment (Skid Steer) (DAY 1) (AZ) |
| 68 | $700.00 | CAT 48″ Fork Attachment (Skid Steer) (DAY 1) (WY) (Sales Tax) |
| 69 | $425.00 | 42″ Fork Attachment (Skid Steer) (DAY 1) (WY) (Sales Tax) |
| 70 | $300.00 | 42″ Fork Attachment (Skid Steer) (DAY 1) (CO) (RESERVED FOR USE DURING LOADOUT UNTIL THURS., JUNE 19TH AT 12:00 NOON) |
| 70A | $350.00 | 48″ Fork Attachment (Skid Steer) (DAY 1) (CO) |
| 70B | $10,000.00 | STIFFIE Hydraulic Pole Puller Attachment (Skid Steer) (DAY 1) (CO) |
| 71 | $850.00 | HANDY Model HSRC12 Rotating Pole Clamp Attachment, s/n RC220504223 (Skid Steer) (Unit# 1132a) (DAY 1) (CO) |
| 72 | $2,000.00 | HANDY Model HSRC12 Rotating Pole Clamp Attachment, s/n RC220515236 (Skid Steer) (Unit# 1132b) (DAY 1) (CO) |
| 73 | $2,050.00 | HANDY Model HRTH43 Rock and Tree Handler Attachment, s/n RTH220515118 (Skid Steer) (Unit# 1132c) (DAY 1) (CO) |
| 74 | $1,700.00 | DIGGA BFT2, 5’6″ Trencher Attachment, s/n 0001546035. In good condition (Skid Steer) (Unit# 1133) (DAY 1) (WY) (Sales Tax) |
| 74A | $700.00 | IR LT204, 68″ Trencher Attachment (Skid Steer) (DAY 1) (CO) |
| 75 | $800.00 | PREMIER Auger Attachment, s/n 18372. In good condition. (Skid Steer) (Unit# 1136) (DAY 1) (WY) (Sales Tax) |
| 76 | $2,600.00 | BOBCAT 90″ Dozer Attachment, s/n 223200119. In good condition (Skid Steer) (Unit# 1135) (DAY 1) (WY) (Sales Tax) |
| 77 | $550.00 | 80″ Broom Attachment. In fair to good condition. (Skid Steer) (Unit# 1134) (DAY 1) (WY) (Sales Tax) |
| 78 | $1,800.00 | JOHN DEERE SB84H, 84″ Snow Blower Attachment, s/n 000153. In good condition. (Hi-Flow Skid Steer) (Unit# 1137) (DAY 1) (WY) (Sales Tax) |
| 78A | $250.00 | 78″ GP Loader Bucket (Skid Steer) (DAY 1) (CO) |
| 79 | $42,000.00 | 2007 CATERPILLAR Model 420E, 4×4 Tractor Loader Extend-A-Hoe, s/n HLS04771, powered by Cat diesel engine and shuttle transmission, equipped with general purpose loader bucket with bolt-on cutting edge, 24″ digging bucket, rear manual coupler, rear auxiliary hydraulics, enclosed ROPS cab with air conditioning, pattern changer, 12.5/80-18 front and 19.5-24 rear tires. In good condition with good tires. (Meter Reads 2,714 Hours) (Unit# 440) (DAY 1) (WY) (Sales Tax) |
| 80 | $42,500.00 | 2008 CATERPILLAR Model 420E, 4×4 Tractor Loader Extend-A-Hoe, s/n HLS06337, powered by Cat diesel engine and shuttle transmission, equipped with general purpose loader bucket with bolt-on cutting edge, Cat 24″ digging bucket, manual rear coupler, rear auxiliary hydraulics, enclosed ROPS cab with air conditioning, pattern changer, 12.5/80-18 front and 19.5-24 rear tires. In good condition with good tires. (Hour Meter Corrupted – Reads 88,302 Hours) (Per Computer Diagnostics Hours Total 3,993) (Unit# 453) (DAY 1) (WY) (Sales Tax) |
| 81 | $37,000.00 | 2006 CATERPILLAR Model 430D, 4×4 Tractor Loader Backhoe, s/n BNK06437, powered by Cat diesel engine and powershift transmission, equipped with general purpose loader bucket with bolt-on cutting edge, 24″ digging bucket, pattern changer, enclosed ROPS cab, 12.5/80-18 front and 19.5L24 rear tires. In good condition with good tires. (Meter Reads 1,164 Hours) (Unit# 443) (DAY 1) (AZ) |
| 81A | $300.00 | PREMIER Hydraulic Auger Attachment, s/n 1024, equipped with 10″ bit (Cat 420E’s) (DAY 1) (WY) (Sales Tax) |
| 82 | $4,800.00 | 2000 AUSA Model 300-RH, 4×4 Rubber Tired Dumper, s/n 15822006, powered by Isuzu 3 cylinder diesel engine and hydrostatic transmission, equipped with 6’6″ steel tapered dump body, 3,000# capacity, canopy, and 10.0/75-15.3 tires. In good condition with good tires. (Meter Reading N/A – Illegible) (Unit# 227) (DAY 1) (WY) (Sales Tax) |
| 83 | $13,500.00 | 1991 MOROOKA Model MST2200 Crawler Dumper, s/n 221062, powered by 6 cylinder diesel engine and hydrostatic transmission, equipped with 12′ steel dump body, ROPS canopy, and 29.5″ rubber tracks. In fair condition with good tracks. (Meter Reads 6,221 Hours) (Unit# 535) (DAY 1) (CO) |
| 84 | $6,000.00 | 1995 MOROOKA Model MST2300 Crawler Flatbed/Pole Carrier, s/n 23169, powered by diesel engine and hydrostatic transmission, equipped with 14′ steel flatbed with 24″ hydraulic side extensions, removable side rails, pole bunks, enclosed ROPS cab, and 29″ rubber tracks. In fair to good condition with fair to good tracks. (Meter Reads N/A Hours) (Meter Inoperable) (Unit# 534) (DAY 1) (CO) |
| 85 | $9,000.00 | YANMAR Model C60R Crawler Dumper, s/n unknown, powered by 4 cylinder diesel engine and hydrostatic transmission, equipped with Super Z220 2-section service crane, 7′ steel dump body with fold-down sides, canopy, and 24″ rubber tracks. In fair condition with fair to good tracks. (Meter Reads 1,559 Hours) (No Serial Number Plate) (Unit# 235) (DAY 1) (CO) |
| 86 | $50,000.00 | 2002 JOHN DEERE Model 644H Rubber Tired Loader, s/n 584202, powered by JD 6081H diesel engine and powershift transmission, equipped with general purpose loader bucket with teeth, 84″ heavy duty fork attachment, ride control, enclosed ROPS cab with air conditioning, and 23.5R25 tires. In good condition with very good tires. (Meter Reads 4,926 Hours) (Sold With Bucket and Forks) (Unit# 475) (DAY 1) (WY) (Sales Tax) |
| 87 | $16,000.00 | 1974 CATERPILLAR Model 950 Rubber Tired Loader, s/n 81J07569, powered by Cat 3304 diesel engine and powershift transmission, equipped with general purpose loader bucket, Balderson hydraulic coupler, enclosed ROPS cab, and 20.5-25 tires. In good condition with good tires. (Meter Reads 6,696 Hours) (Weak Brakes) (Unit# 468) (DAY 1) (AZ) |
| 88 | $4,750.00 | 1967 CATERPILLAR Model 966B Rubber Tired Loader, s/n 75A04005, powered by Cat diesel engine and shuttle transmission with high and low range, equipped with general purpose loader bucket with bolt-on cutting edge, hydraulic coupler, auxiliary hydraulics, ROPS over soft cab, and 23.5-25 tires. In good condition with good tires. (Unit# 473) (DAY 1) (CO) |
| 89 | $14,250.00 | 1980 CATERPILLAR 980C Rubber Tired Loader, s/n 63X03048, powered by Cat 3406 diesel engine and powershift transmission, equipped with spade nose loader bucket with teeth, auxiliary hydraulics, enclosed ROPS cab with air conditioning, and 26.5R25 tires. In good condition with good tires. (Meter Reads 24,314 Hours) (Unit# 474) (DAY 1) (CO) |
| 90 | $16,000.00 | 1977 CATERPILLAR Model 980B Rubber Tired Loader, s/n 89P05813, powered by Cat 3306 diesel engine and powershift transmission, equipped with general purpose loader bucket with bolt-on cutting edge, auxiliary hydraulics, enclosed ROPS cab, and 29.5-25 tires. In good condition with very good tires. (Meter Reads 2,577 Hours + 8,407 Hours on Prior Service Sticker) (Unit# 469) (DAY 1) (WY) (Sales Tax) |
| 91 | $200.00 | MEDFORD 78″ Hydraulic Log Fork/Grapple Attachment (Cat 980C) (DAY 1) (CO) |
| 92 | $1,600.00 | 60″ Hydraulic Log Fork/Grapple Attachment (Cat 980B) (DAY 1) (WY) (Sales Tax) |
| 93 | $1,600.00 | MEDFORD 42″ Hydraulic Log Fork/Grapple Attachment (Cat 950) (DAY 1) (CO) |
| 94 | $1,600.00 | 66″ Quick Coupler Fork Attachment (Cat 966B) (DAY 1) (CO) |
| 95 | $1,600.00 | CAT 72″ Quick Coupler Fork Attachment, s/n 1360496 (Cat 950) (DAY 1) (AZ) |
| 96 | $900.00 | MOROOKA Model MS40V Crawler Loader, s/n 40032, powered by diesel engine and hydrostatic transmission, equipped with general purpose loader bucket, enclosed ROPS cab, and 16″ rubber tracks. In good condition with good undercarriage. (Meter Reads 01,141 Hours) (Runs and Operates – While Moving Forward Steers in Only One Direction) (Unit# 536) (DAY 1) (CO) |
| 97 | $7,000.00 | 1991 CASE Model 1155E Crawler Loader, s/n JAK0009918, powered by Case diesel engine and hi-lo reversing transmission, equipped with hydraulic 4-in-1 loader bucket with teeth, rear winch, enclosed ROPS cab with air conditioning, and 16″ SBG pads. In good condition with good undercarriage (Meter Reads 0,795 Hours) (Unit# 537) (DAY 1) (CO) |
| 98 | $27,000.00 | 1986 CATERPILLAR Model D6H Crawler Tractor, s/n 4RC00477, powered by Cat 3306 diesel engine and powershift transmission, equipped with Balderson semi-U blade with tilt, single barrel multi-shank ripper, ROPS over enclosed cab with air conditioning, and 24″ SBG pads. In good condition with good undercarriage. (Meter Reads 13,838 Hours) (Unit# 532) (DAY 1) (WY) (Sales Tax) |
| 99 | $19,000.00 | 1998 KOMATSU Model D41E-6 Crawler Tractor, s/n B21022, powered by Komatsu diesel engine and powershift transmission, equipped with 6-way straight blade, rear multi-shank ripper, enclosed ROPS cab with air conditioning, and 20″ SBG pads. In good condition with good undercarriage. (Meter Reads 9,278 Hours) (Unit# 531) (DAY 1) (AZ) |
| 100 | $34,500.00 | 2014 KUBOTA Model KX040-4 Mini Hydraulic Excavator, s/n 22138, powered by Kubota diesel engine and hydraulic drive, equipped with 5’3″ dipper stick, 18″ digging bucket, hydraulic thumb, auxiliary hydraulics, manual coupler, 72″ 6-way backfill blade, enclosed ROPS cab with air conditioning, pattern changer, and 14″ rubber tracks. In good condition with good tracks. (Meter Reads 1,843 Hours) (Unit# 457) (DAY 1) (WY) (Sales Tax) |
| 101 | $450.00 | 36″ Cleanup Bucket (Kubota KX040-4) (DAY 1) (WY) (Sales Tax) |
| 102 | $63,000.00 | 2015 CATERPILLAR Model 314EL CR Hydraulic Excavator, s/n ZJT01031, powered by Cat C4.4 diesel engine and hydraulic drive, equipped with 10′ dipper stick, Cat 36″ digging bucket, Cat hydraulic thumb, Cat hydraulic coupler, auxiliary hydraulics, 8’6″ backfill blade, enclosed ROPS cab with air conditioning, pattern changer, rearview camera, and 19.5″ TBG pads. In good condition with good undercarriage. (Meter Reads 1,930 Hours) (Unit# 480) (DAY 1) (WY) (Sales Tax) |
| 103 | $150.00 | CAT 24″ Digging Bucket (Cat 314) (DAY 1) (WY) (Sales Tax) |
| 104 | $12,750.00 | TEXOMA/TEREX Model 600-30 Production Digger, s/n 1006233, powered by Cummins 4 cylinder diesel engine (replacement engine with 648 hours), 4 speed transmission equipped with 3″ kelly bar 30′ digging depth and 180 degree rotation, mounted on 1984 INTERNATIONAL Model F1954 Tandem Axle Truck, VIN# 1HTLKUGR6EHA40178, powered by International 6 cylinder diesel engine and Roadranger 13 speed transmission, equipped with spring over walking beam suspension, hydraulic outriggers and 295/75 R22.5 tires. In fair to good condition with good tires. (Odometer Reads 027,370 Miles) (Unit# 432) (DAY 1) (CO) |
| 105 | $6,250.00 | TEXOMA Model 500-20 Production Digger, equipped with 3″ x 20′ kelly bar, 180 degree rotation, pole grabs, Ramsey winch, mounted on 1980 FMC Track Carrier, s/n unknown, powered by Detroit 6-71 diesel engine and direct drive transmission, equipped with front backfill blade, rear hydraulic outriggers, canopy, and 20″ tracks. In fair to good condition with good undercarriage. (Meter Reads 1,956 Hours) (No Serial Number Plate on Digger) (Unit# 430) (DAY 1) (WY) (Sales Tax) |
| 106 | $5,250.00 | TEXOMA/REEDRILL Model 500 Production Digger, s/n 6654, powered by John Deere 4 cylinder diesel engine and 3 speed transmission, equipped with 3″ x 28′ kelly bar, wiggle tail rotation, mounted on 1978 KENWORTH Model C500A Tandem Axle Truck, VIN# 161438S, powered by Cummins 6 cylinder diesel engine and automatic transmission, equipped with 16′ bed, 44,000# rears, 12,860# front axle, spring over walking beam suspension, rear hydraulic outriggers, and mixed tires. In fair to good condition with fair tires. (Odometer Reads 011,611 Miles) (Unit# 401) (DAY 1) (WY) |
| 107 | $2,250.00 | TEXOMA Model 500-35 Production Digger, s/n 0572026, powered by Cummins 5.9L diesel engine and 4 speed transmission, equipped with 3″ x 20′ kelly bar, 180 degree rotation, mounted on 1974 FWD 6×6 Truck, VIN# D10225, powered by Cummins NHC250 diesel engine and manual transmission, equipped with 15′ bed, walking beam suspension, and hydraulic outriggers. In fair condition with good tires. (Odometer Reads 59,633 Miles) (No VIN# Plate) (High Range in Truck Transmission Not Operating) (Unit# 402) (DAY 1) (WY) |
| 108 | $8,500.00 | HIGHWAY Model HFMS Production Digger, s/n 47469-1, powered by John Deere 4 cylinder diesel engine and Allison transmission, equipped with 4.5″ kelly bar, 20′ digging depth, and winch, mounted on 1981 INTERNATIONAL Model F5070 6×6 Truck, VIN# 1HTD32176BGB14813, powered by Cummins NTC290 diesel engine and Fuller 7LL transmission, equipped with 18′ bed, 3-position engine brake, rear hydraulic outriggers, and spring over walking beam suspension. In fair to good condition with good tires. (Odometer Reads 4,790 Miles) (Unit# 405) (DAY 1) (AZ) |
| 109 | $4,750.00 | REED/TEXOMA Model 330-20 Production Digger, s/n 1003116, powered by Ford 360, V-8 gas engine and 4 speed transmission, equipped with 3″ x 28′ kelly bar, 180 degree rotation, mounted on 1988 MACK Model RS688ST Tandem Axle Truck, VIN# 2M2N187Y3JC024974, powered by Maxidyne diesel engine and Maxidyne 12 speed transmission, equipped with 13′ bed, Mack camelback suspension, and rear hydraulic outriggers. In fair to good condition with good tires. (Odometer Reads 007,954 Miles) (Unit# 429) (DAY 1) (WY) |
| 110 | $5,750.00 | TEXOMA Model 270-13 Production Digger, s/n 6305, powered by 6 cylinder gas engine and 4 speed transmission, equipped with 2.5″ x 12′ Kelly bar, pole grab, Ramsey hydraulic winch and 180 degree rotation, mounted on 1997 INTERNATIONAL Model 4700 Single Axle Truck, VIN# 1HTSCABNXVH428247, powered by T444E diesel engine and 6 speed transmission, equipped with rear hydraulic outriggers, and spring suspension. In good condition with good tires. (Odometer Reads 052,799 Miles) (Unit# 412) (DAY 1) (CO) |
| 111 | $3,250.00 | TEREX Model 330-15 Production Digger, s/n 6335, Ford 360, V-8 gas engine and 4 speed transmission, equipped with 3″ x 20′ kelly bar, wiggle tail rotation, mounted on 1955 Military Model 5T, 6×6 Truck, VIN# M51M1949, powered by Cat 3208 diesel engine and 5 speed transmission, equipped with 14′ steel bed, spring suspension, and rear hydraulic outriggers In fair condition with very good tires. (Odometer Reads 00,099 Miles) (No VIN# Plate) (Unit# 400) (DAY 1) (WY) |
| 112 | $75.00 | 30″ Dirt Auger, with 4.5″ kelly (DAY 1) (AZ) |
| 113 | $75.00 | 24″ Dirt Auger, with 4.5″ kelly (DAY 1) (AZ) |
| 114 | $4,000.00 | 40″ Dirt Auger, with 4″ kelly (DAY 1) (CO) |
| 115 | $700.00 | 30″ Rock Auger, with 4.5″ kelly (DAY 1) (CO) |
| 116 | $200.00 | 28″ Dirt Auger, with 4″ kelly (DAY 1) (CO) |
| 117 | $200.00 | 18″ Rock Auger, with 4″ kelly (DAY 1) (CO) |
| 118 | $200.00 | 12″ Rock Auger, with 4″ kelly (DAY 1) (CO) |
| 119 | $2,800.00 | 42″ Dirt Auger, with 3.5″ kelly (DAY 1) (CO) |
| 120 | $2,800.00 | 50″ Dirt Auger, with 3″ kelly (DAY 1) (CO) |
| 121 | $2,800.00 | 45″ Dirt Auger, with 3″ kelly (DAY 1) (CO) |
| 122 | $700.00 | 28″ Rock Auger, with 3″ kelly (DAY 1) (CO) |
| 123 | $100.00 | 18″ Dirt Auger, with 3″ kelly (DAY 1) (CO) |
| 124 | $300.00 | 24″ Dirt Auger, with 2.5″ kelly (DAY 1) (CO) |
| 125 | $0.00 | 9″ Pilot Auger, with 2.5″ kelly (DAY 1) (CO) |
| 126 | $500.00 | 42″ Core Auger, with 5.5″ kelly (DAY 1) (WY) (Sales Tax) |
| 127 | $600.00 | 30″ Rock Auger, with 4″ kelly (DAY 1) (WY) (Sales Tax) |
| 128 | $600.00 | 20″ Rock Auger, with 4″ kelly (DAY 1) (WY) (Sales Tax) |
| 129 | $700.00 | 30″ Core Auger, with 4″ kelly (DAY 1) (WY) (Sales Tax) |
| 130 | $4,000.00 | 60″ Dirt Auger, with 3″ kelly (DAY 1) (WY) (Sales Tax) |
| 131 | $4,000.00 | 36″ Dirt Auger, with 3″ kelly (DAY 1) (WY) (Sales Tax) |
| 132 | $400.00 | 30″ Dirt Auger, with 3″ kelly (DAY 1) (WY) (Sales Tax) |
| 133 | $1,450.00 | 30″ Core Auger, with 3″ kelly (DAY 1) (WY) (Sales Tax) |
| 134 | $400.00 | 30″ Dirt Auger, with 3″ kelly (DAY 1) (WY) (Sales Tax) |
| 135 | $200.00 | 30″ Dirt Auger, with 3″ kelly (DAY 1) (WY) (Sales Tax) |
| 136 | $700.00 | 28″ Rock Auger, with 3″ kelly (DAY 1) (WY) (Sales Tax) |
| 137 | $350.00 | 28″ Rock Auger, with 3″ kelly (DAY 1) (WY) (Sales Tax) |
| 138 | $200.00 | 26″ Dirt Auger, with 3″ kelly (DAY 1) (WY) (Sales Tax) |
| 139 | $700.00 | 24″ Rock Auger, with 3″ kelly (DAY 1) (WY) (Sales Tax) |
| 140 | $350.00 | 24″ Rock Auger, with 3″ kelly (DAY 1) (WY) (Sales Tax) |
| 140A | $700.00 | 18″ Rock Auger, with 3″ kelly (DAY 1) (WY) (Sales Tax) |
| 140B | $350.00 | 10″ Rock Auger, with 3″ kelly (DAY 1) (WY) (Sales Tax) |
| 140C | $850.00 | Kelly Adaptors, installers, and parts (DAY 1) (WY) (Sales Tax) |
| 140D | $650.00 | Rock and Dirt Teeth (DAY 1) (CO) |
| 141 | $7,000.00 | 2000 STERLING Tandem Axle Dump Truck, VIN# 2FZNCEDB9YAB55867, powered by Cat C10, 370HP diesel engine and Eaton 8LL, 10 speed transmission, equipped with 15′ steel dump body with electric tarp, 40,000# rears, 16,000# front axle, spring over walking beam suspension, tow package, air conditioning, and 11R24.5 tires. In fair to good condition with good tires. (Odometer Reads 154,352 Miles) (Unit# 777) (DAY 1) (WY) |
| 142 | $4,000.00 | 1985 INTERNATIONAL Model 2574 Tandem Axle Dump Truck, VIN# 1HSZPJUT4FHA49915, powered by Cummins NTC350, 350HP diesel engine and 9 speed transmission, equipped with 15′ steel dump body, body vibrator, 44,000# rears, 12,000# front axle, spring over walking beam suspension, tow package with air, air conditioning, and 11R24.5 tires. In fair condition with good tires. (Odometer Reads 196,268 Miles) (Unit# 768) (DAY 1) (WY) |
| 143 | $17,250.00 | 2001 FREIGHTLINER Model FL80 Tandem Axle Water Truck, VIN# 1FVHBXAK41HH71772, powered by Cat 3126 diesel engine and Eaton 10 speed transmission, equipped with 4,000 gallon tank, PTO pump, front, side and rear spray, in-cab controls, 36,000# rears, 12,000# front axle, spring suspension, cruise control, and 11R22.5 tires. In fair to good condition with good tires. (Odometer Reads 278,596 Miles) (Unit# 779) (DAY 1) (CO) |
| 144 | $6,750.00 | 2000 INTERNATIONAL Model 9100 Tandem Axle Water Truck, VIN# 1HSFRAHR1YJ055370, powered by Cummins diesel engine and Eaton 9 speed transmission, equipped with 2007 TWI 4,000 gallon tank, PTO pump, front, side and rear spray bars, air ride suspension, and 11R22.5 tires. In fair to good condition with good tires. (Odometer Reads 482,980 Miles) (Unit# 778) (DAY 1) (AZ) |
| 145 | $7,750.00 | 1997 FREIGHTLINER Model FL70 Single Axle Flatbed Truck, VIN# 1FUWHLBB3VH773730, powered by Cummins 6 cylinder diesel engine and Eaton 9 speed transmission, equipped with 11′ steel flatbed with gooseneck hitch, 22,000# rear and 12,000# front axle, spring suspension, air conditioning, and 10R22.5 tires. In good condition with good tires. (Odometer Reads 044,743 Miles) (Unit# 773) (DAY 1) (WY) |
| 146 | $2,750.00 | 1972 KAISER Model M35A2, 2.5 Ton, 6×6 Flatbed Compressor Truck, VIN# 04E86471053910898, powered by multi fuel engine and 5 speed transmission with 2 speed auxiliary, equipped with 12’6″ steel flatbed, Sullair 185DPQJD compressor, s/n 004135185, JD diesel engine and (4) air hose reels, bed mounted vise, front winch, tow package with air, and spring suspension. In fair to good condition with good tires. (Odometer Reads 38,813 Miles) (Unit# 250) (DAY 1) (CO) |
| 147 | $15,000.00 | 1986 MACK Model Superliner Tandem Axle Log/Pole Loader Truck, VIN# 1M2AY39C8GM002105, powered by Mack V-8, 500HP diesel engine and manual transmission, equipped with Grizzly 215C hydraulic log loader, s/n 92394, with rotating grapple, hydraulic outriggers, 38,000# rears, 12,000# front axle, engine brake, air slide 5th wheel, spring over walking beam suspension, aluminum wheels, 315/80R22.5 front and 11R24.5 rear tires. In fair to good condition with good tires. (Odometer Reads 016,571 Miles) (Meter Reads 1,741 Hours) (Unit# 716) (DAY 1) (CO) |
| 148 | $5,000.00 | 1991 INTERNATIONAL Model 9370 Tandem Axle Log/Pole Loader Truck, VIN# 2HTFG0000MC051411, powered by Cat 3406 diesel engine and Eaton 18 speed transmission, equipped with Crown 3000 log loader with rotating grapple, log bunks, engine brake, hydraulic outriggers, walking beam suspension, and pintle hitch. In fair condition with fair tires. (Odometer Reads 619,999 Miles) (Unit# 719) (DAY 1) (WY) |
| 149 | $15,000.00 | 2007 KENWORTH Model T802 Tandem Axle Truck Tractor, VIN# 1XKDD49X67R191558, powered by Cummins ISX450, 450HP diesel engine and Fuller 10 speed transmission, equipped with 40,000# rears, 12,000# front axle, 3-position engine brake, walking beam suspension, stationary 5th wheel, aluminum headache rack, aluminum wheels, 52,000# GVWR, and cruise control. In good condition with very good tires. (Odometer Reads 610,840 Miles) (Unit# 734) (DAY 1) (CO) |
| 150 | $19,500.00 | 2006 KENWORTH Model T800 Tandem Axle Truck Tractor, VIN# 1XKDDB0X86R136741, powered by Cat C15, 550HP diesel engine and Eaton 10 speed transmission, equipped with 46,000# rears, 13,200# front axle, wet-line air ride suspension, 3-position engine brake 3.73 ratio, stationary 5th wheel, air conditioning, cruise control, aluminum front wheels, and 11R 24.5 tires. In good condition with good tires. (Meter Reads 498,229 Miles) (Engine Rebuilt 2020) (Unit# 732) (DAY 1) (CO) |
| 151 | $26,500.00 | 1996 KENWORTH Model W900 Tri-Axle Truck Tractor, VIN# 1XKWD29X7TR732785, powered by Cummins N14, 435HP diesel engine and Fuller 18 speed transmission, equipped with wet-line, 46,000# rears, air lift 3rd axle, air ride suspension, 3-position engine brake, load scale, air slide 5th wheel, aluminum headache rack, 80,000 GVWR, 11R24.5 front and rear tires, and 255/70R22.5 lift tires. In good condition with good tires. (Odometer Reads 722,076 Miles) (Unit# 718) (DAY 1) (CO) |
| 152 | $41,000.00 | 1997 PETERBILT Model 379 Tandem Axle Truck Tractor, VIN# 1XP5DR9XXVD437422, powered by Cat 3406E, 600HP diesel engine and Eaton 13 speed transmission, equipped with 38,000# rears, 12,000# front axle, air ride suspension, aluminum headache rack, aluminum wheels, 3-position engine brake, air slide 5th wheel, air conditioning, and 11R22.5 tires. In good condition with good tires. (Meter Reads 1,516,173 Miles) (Unit# 725) (DAY 1) (CO) |
| 153 | $26,000.00 | 1997 PETERBILT Model 379 Tandem Axle Truck Tractor, VIN# 1XP5DU9X8VD433341, powered by Cat C12, 410HP diesel engine and Eaton 10 speed transmission, equipped with 38,000# rears, 12,000# front axle, Unibilt 60″ sleeper, 3-position engine brake, air slide 5th wheel, air ride suspension, air conditioning, aluminum headache rack, cruise control and 11R 22.5 tires. In good condition with good tires. (Odometer Reads 0,527,268 Miles) (Unit# 714) (DAY 1) (CO) |
| 154 | $26,000.00 | 1997 PETERBILT Model 379 Tandem Axle Truck Tractor, VIN# 1XP5DU9X3VD433344, Cat C12, 410HP diesel engine and Fuller 10 speed transmission, equipped with 38,000# rears, 12,000# front axle, Unibilt 60″ sleeper, air slide 5th wheel, 3-position Jake brake, aluminum wheels, air ride suspension, heated mirrors, cruise control, and 11R22.5 tires. In good condition with good tires. (Odometer Reads 581,899 Miles) (Unit# 715) (DAY 1) (CO) |
| 155 | $7,500.00 | 1994 KENWORTH Model T600 Tandem Axle Truck Tractor, VIN# 1XKADR9X3RR625051, powered by Detroit Series 60, 500HP diesel engine and Fuller 13 speed transmission, equipped with 38,000# rears, 12,000# front axle, air ride suspension, 3-position engine brake, aluminum headache rack, pilot aluminum wheels, and 285/75R24.5 tires. In good condition with good tires. (Odometer Reads 32,558 Miles) (Unit# 710) (DAY 1) (AZ) |
| 156 | $19,500.00 | 1994 MACK Model CH613 Tandem Axle Truck Tractor, VIN# 1M2AA13Y7RW036296, powered by Mack E7-350, 350 HP diesel engine and Maxitorque T2130 13 speed transmission, equipped with 38,000# rears, 12,000# front axle, wetline, Mack Camelback suspension, steel headache rack, air conditioning, cruise control, aluminum wheels, air slide 5th wheel and 11R22.5 tires. In good condition with good tires. (Odometer Reads 169,288 Miles) (01,478 Hours) (Unit# 717) (DAY 1) (CO) |
| 157 | $28,000.00 | 1999 TALBERT Model T3DW-50SA-HRG-1-T1, 51 Ton Tri-Axle Lowboy Trailer, VIN# 40FW04936X1017966, equipped with non-ground bearing gooseneck, gas pony motor, 8’6″x22’6″ deck, 14′ over axles, air ride suspension, outriggers, chain dogs, and 255/70R22.5 tires. In good condition with good tires. (S.E. INVESTMENTS CONSIGNOR) (Unit# 901) (DAY 1) (CO) |
| 158 | $20,000.00 | 1996 DYNAWELD 50 Ton Tri-Axle Lowboy Trailer, VIN# 4U181D1X1T1X33190, equipped with non-ground bearing gooseneck, 8’6″ x 24′ level deck, 14′ over axles, air ride suspension, outriggers, chain dogs, and 255/70R22.5 tires. In good condition with good tires. (Unit# 855) (DAY 1) (CO) |
| 159 | $5,000.00 | 2005 FONTAINE Model EDFT-6-8048WSAWK, 48′ Spread Axle Step Deck Trailer, VIN# 13N24830351525848, equipped with 8’x10′ upper deck, 38′ lower deck, 120″ spread, 69,556# GVWR, and air ride suspension. In good condition with good tires. (Unit# 861) (DAY 1) (AZ) |
| 160 | $4,500.00 | 1996 DOONAN Model 402D3 Spread Axle Step Deck Trailer, VIN# 1D9BG4828T1208463, equipped with 8’2″x10′ upper deck, 37’6″ lower deck, 120″ spread, air ride suspension, and 255/70R22.5 tires. In good condition with good tires. (Unit# 804) (DAY 1) (CO) |
| 161 | $5,000.00 | 1995 FONTAINE 52′ Spread Axle Step Deck Trailer, VIN# 13N248300S1563694, 8’6″x11′ upper deck, 36′ lower deck, 5′ beavertail, 120″ spread, air ride suspension, and 255/70R22.5 tires. In good condition with good tires. (Unit# 816) (DAY 1) (CO) |
| 162 | $3,250.00 | 1969 LOADCRAFT Model PSD-35AR Tandem Axle Step Deck Trailer, VIN# CB690554, equipped with 8′ x 8′ upper deck, 32′ lower deck, 35 ton capacity, air ride suspension, and 11R22.5 tires. In good condition with good tires. (Off Road Use Only; Many Modifications Have Been Done) (Unit# 851) (DAY 1) (WY) |
| 163 | $2,500.00 | 1999 FRUEHAUF Tandem Axle 48′ Flatbed Trailer, VIN# 1JJF452F4XS529227, equipped with 8′ width, spring suspension, ratchet tie downs, and 11R24.5 tires. In good condition with good tires. (No VIN# Plate) (Unit# 819) (DAY 1) (AZ) |
| 164 | $1,150.00 | 1966 HOBBS Tandem Axle 45′ Flatbed Trailer, VIN# FHG347901, equipped with 8′ width, sliding tandems, ratchet tie downs, spring suspension, and mixed tires. In fair condition with fair tires. (No VIN# Plate) (Unit# 852) (DAY 1) (WY) |
| 165 | $1,250.00 | 1980 FRUEHAUF Tandem Axle 36′ Oilfield Float Trailer, VIN# 948880, equipped with 8′ width, rolling tailboard, folding landing gear, spring suspension, aluminum wheels, and 295/75R22.5 tires. In fair condition with fair tires. (No VIN# Plate) (Unit# 860) (DAY 1) (CO) |
| 165A | $450.00 | 1985 FMC Model Vanguard 3000 Street Sweeper, VIN# 1F9VM3H16FP041082, powered by Detroit diesel engine and hydrostatic transmission, equipped with center broom, (2) gutter brooms, hydraulic dump hopper, and 10.00-20 tires. In fair condition with fair to poor tires. (Odometer Reads 07,033 Miles) (No Title) (DAY 1) (WY) (Sales Tax) |
| 166 | $2,500.00 | 1982 FORD Model L9000 6×6 Truck Tractor, VIN# 1FDZY90J0CVA12844, powered by Detroit 6-71 diesel engine and Roadranger 13 speed transmission, equipped with spring over walking beam suspension. (Odometer Reads 93,305 Miles) (Runs) (Unit# 733) (DAY 1) (CO) |
| 167 | $100.00 | 1952 MACK 5 Ton 6×6 Cab & Chassis, s/n M51M3163, powered by Detroit diesel engine and 5 speed transmission (Not Running) (No VIN# Plate) (Unit# 641) (DAY 1) (WY) |
| 168 | $100.00 | 1958 DIAMOND REO Model M52, 6×6 Framing Truck, VIN# M525553, powered by turbo diesel engine and 5 speed transmission (Not Running) (Unit# 218) (DAY 1) (WY) |
| 168A | $25.00 | 1967 AMC Jeep, VIN# 11191 (Not Running; No Engine) (DAY 1) (WY) |
| 169 | $25.00 | 1953 STUDEBAKER 2.5 Ton 6×6 Flatbed Truck, VIN# M26605, powered by Ford V-8 gas engine and 5 speed transmission (Not Running) (Unit# 640) (DAY 1) (WY) |
| 169A | $50.00 | GMC M Series 2.5 Ton, 6×6 Cab and Chassis, powered by 6 cylinder gas engine and powershift transmission, equipped with spring suspension and 9.00-20 tires. (Odometer Reads 41,301 Miles) (No VIN# Plate) (No Title) (Not Running) (Unit# 781) (DAY 1) (WY) (Sales Tax) |
| 169B | $10.00 | REO 2.5 Ton, 6×6 Reel Truck, 5 speed transmission with 2 speed rear, equipped with reel stand with gas power unit (Not Running) (No Title) (Unit# 622) (DAY 1) (CO) |
| 169C | $30.00 | STERLING Cab and Chassis (No Engine, Transmission) (Parts Only) (No Title) (DAY 1) (CO) |
| 170 | $3,250.00 | 2022 8′ x 40′ x 9’6″ Storage Container, s/n ZCMC2226630, equipped with (1) end door and (4) side doors. In very good condition. (Unit# 1172) (DAY 1) (AZ) |
| 171 | $400.00 | 1951 BROWN 22′ Single Axle Van Trailer, VIN# 510668, equipped with swing rear doors, curbside door, spring suspension, and 10.00×20 tires. In fair condition with fair tires. (No VIN# Plate) (No Brakes, No Lights) (Unit# 811) (DAY 1) (WY) |
| 172 | $100.00 | 1972 TRAILMOBILE 40′ Tandem Axle Van Trailer, VIN# H90538, equipped with swing rear doors. In good condition. (Unit# 813) (DAY 1) (CO) |
| 200 | $1,300.00 | 1996 DITCH WITCH Model 1020H Walk Behind Trencher, s/n 1N0950, powered by gas engine and hydrostatic transmission, equipped with 42″ trencher bar and single axle tilt deck trailer. In good condition. (Unit# 467) (No Title On Trailer) (DAY 2) (WY) (Sales Tax) |
| 201 | $7,000.00 | 2005 INGERSOLL RAND Model P185WIR, 185CFM Portable Air Compressor, s/n 353852UBP820, powered by IR 4 cylinder diesel engine. In good condition. (Meter Reads 1,112 Hours) (Unit# 204) (DAY 2) (WY) (Sales Tax) |
| 202 | $5,100.00 | 2005 SULLAIR Model 185DPQJD, 185CFM Portable Air Compressor, s/n 004-148469, powered by John Deere 4 cylinder diesel engine. In good condition. (Meter Reads 1,833 Hours) (Unit# 206) (DAY 2) (WY) (Sales Tax) |
| 203 | $5,100.00 | 2007 SULLAIR Model 185JD, 185CFM Skid Mounted Air Compressor, s/n 200704200112, powered by John Deere 4 cylinder diesel engine, equipped with fork pockets. In fair condition. (Meter Reads 0,090 Hours) (Unit# 205) (DAY 2) (WY) (Sales Tax) |
| 204 | $4,800.00 | 1987 INGERSOLL RAND 185CFM Portable Air Compressor, s/n 165260U87957, powered by John Deere 4 cylinder diesel engine, equipped with 225/75R15 tires. In fair condition with fair to good tires. (Meter Reads 0,468 Hours) (Unit# 201) (DAY 2) (WY) (Sales Tax) |
| 205 | $4,800.00 | 2005 MULTIQUIP Model DCA25USI, 20KW Portable Generator, s/n 8101618, VIN# 4GNFU10175B015951powered by Isuzu 4 cylinder diesel engine, equipped with 25KVA, 3-phase/single phase. In good condition with good tires. (Meter Reads 07,412 Hours) (Has Title) (Unit# 284) (DAY 2) (WY) |
| 206 | $4,100.00 | 2004 MULTIQUIP Model DCA-25USI, 14.4KW Portable Generator, s/n 8100098, powered by Isuzu 4 cylinder diesel engine, equipped with 25KVA, 3 phase/single phase, and 175/80R13 tires. In good condition with good tires. (Meter Reads 12,705 Hours) (Unit# 208) (DAY 2) (CO) |
| 206A | $275.00 | 15KW Portable Gen Set, powered by 4 cylinder diesel engine, equipped with 120/240 volt and air brakes (Engine Runs – Generator Not Making Electric) (DAY 2) (CO) |
| 207 | $22,000.00 | 2000 ALTEC Model D4060TR Digger Derrick/Aerial Lift, s/n 0900CK0166, equipped with 4-section boom, 30,000# capacity, 60′ bucket height, pole grab, 2-man split bucket, 30″ rock auger, (2) hydraulic tool lines, and radio remote, mounted on 2001 FREIGHTLINER Model Tandem Axle Flatbed Truck, VIN# 1FVHALA851LH63791, powered by Cummins ISM330, 330HP diesel engine and Allison automatic transmission, equipped with engine brake, 56,000# GVWR, heated mirrors, cruise control, air conditioning, (4) hydraulic outriggers, tow package, and 11R22.5 tires. In good condition with good tires. (Odometer Reads 046,959 Miles) (Unit# 434) (DAY 2) (WY) |
| 208 | $6,500.00 | 1999 TEREX/TELELECT Model Commander 6000 Digger Derrick, s/n 1990909746, equipped with 3-section boom, 27,360# capacity, 48.7′ lift height, pole grab, 24″ auger, hydraulic tool line, mounted on 2000 INTERNATIONAL Model 4900 Tandem Axle Line Body Truck, VIN# 1HTSJAAR1YH262005, powered by DT466E diesel engine and automatic transmission, equipped with 17′ line body, hydraulic outriggers, spring over walking beam suspension, 40,000# rears, 14,000# front axle, tow package with air, bumper winch, air conditioning and 11R 24.5 tires. In good condition with good tires. (Odometer Reads 129,341 Miles) (Meter Reads 011,514 Hours) (Unit# 433) (DAY 2) (CO) |
| 209 | $2,000.00 | 1997 ALTEC Model D945TB Digger Derrick, s/n 0597-BA1005, equipped with 3-section boom, 27,070# capacity, 45′ lift height, 20″ auger, pole grab, hydraulic tool line, behind cab controls, mounted on 1997 GMC Model C7500 Single Axle Line Body Truck, VIN# 1GDM7H1J9VJ514140, powered by Cat 6 cylinder diesel engine and 6 speed transmission, equipped with 14′ line body, hydraulic outriggers, spring suspension, tow package and air brakes. In good condition with good tires. (Odometer Reads 055,830 Miles) (Unit# 428) (DAY 2) (CO) |
| 210 | $3,500.00 | TELELECT Model Commander 20,950# Digger Derrick, s/n 447-45FU, equipped with 3-section boom, pole grab, center mounted on 1987 INTERNATIONAL Model 1854 4×4 Flatbed/Utility Truck, VIN# 1HTLFTVN7HH495038, powered by International DT466 diesel engine and 10 speed transmission, equipped with 12′ flatbed, hydraulic outriggers. In good condition with good tires. (Odometer Reads 141,170 Miles) (Unit# 427) (DAY 2) (AZ) |
| 210A | $525.00 | PENGO 24″ Auger (DAY 2) (CO) |
| 210B | $125.00 | PENGO 12″ Auger (DAY 2) (CO) |
| 210C | $25.00 | PENGO Extension, 3″ kelly adaptor, 4″ to 3″ kelly adaptor (DAY 2) (CO) |
| 211 | $23,000.00 | 2007 LIFT-ALL Model LAN/HD-75-2E, 75′ Aerial Lift, s/n 9171110775LAN/HD, equipped with 800# 2-man bucket, mounted on 2007 FREIGHTLINER Model Business Class M2, 4×4 Flatbed Truck, VIN# 1FVDCXDC87HX81873, powered by Cat C7, 250HP diesel engine and 6 speed transmission, equipped with 20′ flatbed, saddle pack tool boxes, 12,000# front, 21,000# rear axle, and (4) hydraulic outriggers. In good condition with good tires. (Odometer Reads 25,981 Miles) (Unit# 372) (DAY 2) (AZ) |
| 212 | $18,500.00 | 2006 LIFT-ALL Model LOM10-55-2MS, 55′ Material Handling Aerial Lift, s/n 8704090655L0M10, equipped with 700# 2-man bucket, material handling jib with winch, rotating basket with hydraulic tool outlets, mounted on 2007 PETERBILT Model 335 Single Axle Line Body Truck, VIN# 2NPLHZ7X37M687705, powered by Cummins ISC260 diesel engine and Eaton 6 speed transmission, equipped with 16′ line body, 33,000# GVWR, (4) hydraulic outriggers, and 11R22.5 tires. In good condition with good tires. (Odometer Reads 86,413 Miles) (Unit# 382) (DAY 2) (AZ) |
| 213 | $18,500.00 | 2006 LIFT-ALL Model LOM10-55-2MS, 55′ Material Handling Aerial Lift, s/n 8701080655L0M10, equipped with 700# 2-man bucket, material handling jib with winch, rotating basket with hydraulic tool outlets, mounted on 2007 PETERBILT Model 335 Single Axle Line Body Truck, VIN# 2NPLHZ7X87M687702, powered by Cummins ISC260 diesel engine and Eaton 6 speed transmission, equipped with 16′ line body, 33,000# GVWR, hydraulic outriggers, and 11R22.5 tires. In good condition with good tires. (Odometer Reads 108,148 Miles) (Unit# 381) (DAY 2) (AZ) |
| 214 | $18,500.00 | 2008 LIFT-ALL Model LOM10-55-2MS, 55′ Material Handling Aerial Lift, s/n 9301030855L0M10, equipped with 700# 2-man bucket, material handling jib with winch, rotating basket with hydraulic tool outlets, mounted on 2007 STERLING Acterra Single Axle Line Body Truck, VIN# 2FZACHDC87AY40298, powered by Cat C7, 250HP diesel engine and 6 speed transmission, equipped with 16′ line body, 33,700# GVWR, (4) hydraulic outriggers, and 11R22.5 tires. In good condition with good tires. (Odometer Reads 116, 542 Miles) (Unit# 383) (DAY 2) (AZ) |
| 215 | $9,500.00 | 2008 TEREX HI RANGER Model 5TC-55, 55′ Material Handling Aerial Lift, s/n 2080336240, equipped with 500# bucket, material handling jib, mounted on 2007 FORD Model F750XL Single Axle Line Body Truck, VIN# 3FRXF75T77V514649, powered by Cat C7 diesel engine and automatic transmission, equipped with 16′ line body, 33,000# GVWR, tow package with air, cruise control, air conditioning, (4) hydraulic outriggers, and 11R22.5 tires. In good condition with good tires. (Odometer Reads 079,556 Miles) (Unit# 371) (DAY 2) (WY) |
| 216 | $2,500.00 | 1995 TEREX Model 5FLA-48PBI, 48′ Aerial Lift, s/n 099519702, equipped with 700# 2-man bucket, mounted on 1996 INTERNATIONAL Model 4900 Single Axle Line Body Truck, VIN# 1HTSDAANXTH245314, powered by DT466 diesel engine and Allison automatic transmission, equipped with 15′ line body, spring suspension, 33,000# GVWR, tow package with air, bumper winch, and hydraulic outriggers. In good condition with good tires. (Odometer Reads 066,570 Miles) (011,278 Hours) (Fuel In Oil) (Unit# 362) (DAY 2) (CO) |
| 217 | $1,100.00 | 1992 HI RANGER Model 5FB55, 55′ Aerial Lift, s/n 019217810, equipped with 550# 2-man bucket, mounted on 1992 INTERNATIONAL Model 4700 Single Axle Line Body Truck, VIN# 1HTSCPGP8NH436795, powered by International 6 cylinder diesel engine and 5 speed transmission with 2 speed rear, equipped with 15′ line body, spring suspension, tow package and hydraulic outriggers. In fair to good condition with good tires. (Odometer Reads N/A Miles) (Odometer Illegible) (Unit# 373) (DAY 2) (CO) |
| 218 | $800.00 | 1983 REACH-ALL Model HD5055, 55′ Line Guard, s/n 4774, mounted on 1983 FORD Model F-700 Single Axle Line Body Truck, VIN# 1FDXK74N1DVA18325, powered by Detroit diesel engine and 5 speed transmission with 2 speed rear, equipped with 16′ line body, 27,500# GVWR, and 11R22.5 tires. In fair condition with good tires. (Odometer Reads 18,824 Miles) (Not Certifiable as a Bucket Truck) (Unit# 309) (DAY 2) (WY) |
| 219 | $12,750.00 | 1996 ELLIOT Model ECG-4-85, 85′ Aerial Lift, equipped with 4-section boom, 6,000# capacity, 36″ x 72″, 600# rotating basket, mounted on 1985 MACK Model RL686LS Tandem Axle Flatbed Truck, VIN# 1M2R131C3FM001140, powered by Mack EM6-300, 300HP diesel engine and Maxitorque extended range transmission, equipped with 20′ flatbed, walking beam suspension, (4) hydraulic outriggers, hydraulic front stabilizer, and 11R22.5 tires. In fair condition with good tires. (Odometer Reads 106,032 Miles) (Meter Reads 6,884 Hours) (Unit# 317) (DAY 2) (WY) |
| 220 | $9,500.00 | Hydraulic Anchor Pull Tester, powered by Isuzu 3 cylinder diesel engine, rated at PSI x 15.708 up to 30,000# @ 1,910 PSI, mounted on 1989 Dodge Model 350LE, 4×4 Flatbed Truck, VIN# 1B6MM3685KS189678, powered by Cummins turbo diesel engine and 5 speed transmission, equipped with 10′ steel flatbed, dual rear wheels, and 235/85R16 tires. In fair to good condition with good tires. (Odometer Reads 84,405 Miles) (No VIN# Plate) (Unit# 150) (DAY 2) (WY) |
| 221 | $7,500.00 | 1991 LORAIN Model LCD150, 15 Ton Hydraulic Carry Deck Crane, s/n 99158, powered by Cummins 4 cylinder diesel engine and powershift transmission, equipped with 22′-52′ 3-section hydraulic boom, 15′ swing away jib, 2-sheave hook block, enclosed cab, (4) hydraulic outriggers, and 15-22.5 tires. In fair to good condition with good tires. (Meter Reads 04,361 Hours) (Unit# 338) (DAY 2) (WY) (Sales Tax) |
| 222 | $7,500.00 | 1982 GALION Model 150FA, 15 Ton Cab Down Hydraulic Rough Terrain Crane, s/n 8599, powered by Cummins 6 cylinder diesel engine and powershift transmission, equipped with 20′-60′ 4-section hydraulic boom, 2-sheave hook block, enclosed cab, (4) hydraulic outriggers, and 14.00-24 tires. In fair to good condition with good tires. (Meter Reads 2,437 Hours) (No Serial Number Plate) (Unit# 332) (DAY 2) (AZ) |
| 223 | $6,000.00 | 1974 GALION Model 150A, 15 Ton, Cab Down Hydraulic Rough Terrain Crane, s/n 5617, powered by Cummins 4 cylinder diesel engine and powershift transmission, equipped with 20′-60′ 4-section hydraulic boom, 2-sheave hook block, enclosed cab, (4) hydraulic outriggers, and 14.00-24 tires. In fair to good condition with good tires. (Meter Reads 4,898 Hours) (Sold With Additional Hubs and Tires for Duals) (Unit# 342) (DAY 2) (WY) (Sales Tax) |
| 224 | $7,000.00 | 1981 MANTIS Model 2610, 14 Ton Hydraulic Crawler Crane, s/n 26207, powered by Deutz air cooled diesel engine and hydraulic drive equipped with 24.5′ – 42′ 2-section hydraulic boom plus 18′ manual section to 60′, 2-sheave hook block, enclosed cab, and 30″ SBG pads. In fair to good condition with fair undercarriage. (Meter Reads 4,150 Hours) (Unit# 335) (DAY 2) (WY) (Sales Tax) |
| 225 | $37,000.00 | 2008 TADANO Model GR300XL-1, 30 Ton Hydraulic Rough Terrain Crane, s/n 560979, powered by Cummins 6.7L diesel engine and powershift transmission, equipped with 31′-101′ 4-section hydraulic boom, 23.6′-42′ telescopic swing away jib, main and auxiliary hoists, LMI, 3-sheave hook block, enclosed cab with air conditioning, (4) hydraulic outriggers, and 20.5-25 tires. In good condition with good tires. (Meter Reads 9,474 Hours) (Unit# 344) (DAY 2) (WY) (Sales Tax) |
| 226 | $17,000.00 | 2001 TEREX Model RT230, 30 Ton Hydraulic Rough Terrain Crane, s/n 12452, powered by Cummins 6 cylinder diesel engine and powershift transmission, equipped with 30′-94′ 4-section hydraulic boom, 26′-43′ telescopic swing away jib, Greer LMI, hook block, enclosed cab, (4) hydraulic outriggers, and 20.5-25 tires. In good condition with good tires. (Meter Reads 5,482 Hours) (Unit# 337) (DAY 2) (AZ) |
| 227 | $26,500.00 | 1999 TEREX Model RT450, 50 Ton Hydraulic Rough Terrain Crane, s/n 11356, powered by Cummins 4 cylinder diesel engine and powershift transmission, equipped with 33′-105′ 4-section hydraulic boom, 33′-58′ telescopic swing away jib, main and auxiliary hoists, 5-sheave hook block, LMI enclosed cab, (4) hydraulic outriggers, and 26.5-25 tires. In good condition with fair to good tires. (Meter Reads 3,232 Hours) (Unit# 343) (DAY 2) (CO) |
| 228 | $61,000.00 | 1999 GROVE Model RT860, 60 Ton Hydraulic Rough Terrain Crane, s/n 87978, powered by Cat diesel engine and powershift transmission, equipped with 37′-115′ 4-section hydraulic boom, 35′ swing away jib, main and auxiliary hoists, PAT DS350 LMI, 4-sheave hook block, weighted hook enclosed cab, (4) hydraulic outriggers, and 29.5-25 tires. In good condition with good tires. (Meter Reads 005,986 Hours) (Has Title) (Unit# 341) (DAY 2) (CO) |
| 229 | $30,000.00 | 1990 TADANO Model TR500E, 55 Ton Hydraulic Rough Terrain Crane, s/n 545072, powered by Cummins 8.3L cylinder diesel engine and powershift transmission, equipped with 35′-111′ 4-section hydraulic boom, 32′-56′ telescopic swing away jib, main and auxiliary hoists, 55 Ton 3-sheave hook block, enclosed cab, (4) outriggers, and 29.5-25 tires. In fair to good condition with good tires. (Meter Reading N/A) (Unit# 336) (DAY 2) (CO) |
| 229A | $100.00 | 2000 LIFTING TECH Model REC3-900, 36″ x 84″ Suspended Man Basket, s/n EC0300143. (Unit# 380) (DAY 2) (CO) |
| 230 | $150,000.00 | 2007 NATIONAL Model 14127H, 29.5 Ton Boom/Aerial Lift, s/n 294425, equipped with 31′-127′ 5-section boom, 30′ swing away jib, PAT DS160 LMI, 36″ x 66″ 2-man basket, radio upper controls, 15 ton single sheave hook block, behind cab mounted on 2008 PETERBILT Model 367 Tri-Drive Truck, VIN# 1NPTXUEX48N757044, powered by Cat C13 diesel engine and Eaton 8LL, 10 speed transmission, equipped with 21’6″ flatbed, 18,500# each rear axle, 20,000# front axle, 75,500# GVWR, hydraulic outriggers, front hydraulic stabilizer, air conditioning, cruise control and air ride suspension, 425/65R22.5 front and 11R22.5 rear tires. In good condition with good tires. (Odometer Reads 49,116 Miles) (Emissions Altered) (Unit# 329) (DAY 2) (WY) |
| 231 | $90,000.00 | 2007 NATIONAL Model 14127, 33 Ton Boom/Aerial Lift, s/n 293328, equipped with 32′-127′ 5-section hydraulic boom, 30′ swing away jib, enclosed operators cab, 42″ x 72″ man basket, radio upper controls, PAT DS160 LMI, single sheave hook block, rear mounted on 2007 INTERNATIONAL Model Paystar 5600i, 8×6 Truck, VIN# 1HTXGAHT97J533048, powered by Cummins ISM385 diesel engine and Allison automatic transmission, equipped with 40,000# rears, 22,000# front axle, air lift 3rd axle, Hendrickson suspension, and hydraulic outriggers, front hydraulic stabilizer, air conditioning, cruise control, 425/65R 22.5 front, 11R 24.5 lift, 12R 24.5 rear. In good condition with good tires. (Odometer Reads 7,373 Miles) (Meter Reads 1,638 Hours) (Unit# 365) (DAY 2) (CO) |
| 232 | $90,000.00 | 2005 ALTEC Model AC35-127S-WS, 35 Ton Boom/Aerial Lift, s/n 1205EG0234, equipped with 31′-127′ 5-section hydraulic boom, enclosed operators cab, 36″ x 72″ man basket, radio upper controls, hook block rear mounted on 2007 PETERBILT Model 357 Tri-Axle Truck, VIN# 1NPALU0X37D664434, powered by Cat C13 diesel engine and Eaton 10 speed transmission, equipped with 26′ steel flatbed, 40,000# rears, 20,000# front axle, hydraulic outriggers, front hydraulic stabilizer, air lift 3rd axle, engine brake, tow package with air, air conditioning, aluminum wheels and spring over walking beam suspension, 425/65R 22.5 front, 295/75 R22.5 lift, 11R 22.5 rear. In good condition with good tires. (Odometer Reads 86,048 Miles) (Unit# 364) (DAY 2) (CO) |
| 233 | $90,000.00 | 2010 NATIONAL Model 9103A, 26 Ton Boom/Aerial Lift, s/n 296027, equipped with 30′-103′ 4-section hydraulic boom, 25′-44′ telescopic swing away jib, PAT DS160 LMI, 42″ x 72″ man basket, radio upper controls, single sheave hook block, behind cab mounted on 2010 PETERBILT Model 365 Tandem Axle Truck, VIN# 1NPSL00X3AD109195, powered by Cummins ISM385, 385HP diesel engine and Eaton 13 speed transmission, equipped with 22′ flatbed, 40,000# rears, 18,740# front axle, spring over walking beam suspension, engine brake, (4) hydraulic outriggers, heated mirrors, cruise control, air conditioning, 425/65R22.5 front and 11R22.5 rear tires. In good condition with good tires. (Odometer Reads 31,388 Miles) (Meter Reads 8,279 Hours) (Emissions Altered) (Unit# 367) (DAY 2) (WY) |
| 234 | $52,000.00 | 2002 TEREX Model RS60100, 30 Ton Boom, s/n 5920302057, equipped with 30.5′-100′ 4-section hydraulic boom, 31′-54′ telescopic swing away jib, operators cab, Greer MG586 LMI, 42″ x 90″ man basket, rear mounted on 2002 STERLING Model Tandem Axle Truck, VIN# 2FZHATAKX2AK42984, powered by Cat 6 cylinder diesel engine and Eaton 8LL, 10 speed transmission, equipped with 21′ flatbed, 40,000# rears, 20,000# front axle, spring over walking beam suspension, engine brake, (4) hydraulic outriggers, air conditioning, 425/65R22.5 front and 11R22.5 rear tires. In good condition with good tires. (Odometer Reads 162,037 Miles) (Meter Reads 14,558 Hours) (Engine Rebuilt December 2020) (Unit# 368) (DAY 2) (WY) |
| 235 | $64,500.00 | 2002 TEREX Model BT60100, 30 Ton Boom/Aerial Lift, s/n 6010302109, equipped with 30.5′-100′ 4-section hydraulic boom, 31′-54′ telescopic swing away jib, 46″ x 77″ man basket, radio remote upper controls, Greer MG586 LMI, anti-two block, 3-sheave hook block, behind cab mounted on 2002 WESTERN STAR Model 4886FX Tri-Drive Truck, VIN# 2WLNSD1F92K972821, powered by Cat C10, 370HP diesel engine and Eaton 9LL transmission, equipped with 22′ steel flatbed, 20,000# rears, 20,000# front axle, hydraulic outriggers, 80,000# GVWR, air ride suspension, 385/65R22.5 front and 11R22.5 rear tires. In good condition with good to very good tires. (Odometer Reads 68,560 Miles) (Meter Reads 544 Hours) (Unit# 360) (DAY 2) (AZ) |
| 236 | $64,500.00 | 2001 NATIONAL Model 9103A, 26 Ton Boom/Aerial Lift, s/n 33785, equipped with 30′-103′ 4-section hydraulic boom, 42″ x 72″ basket 2-man basket, radio remote upper controls, 10 ton 2-sheave hook block, weighted hook, behind cab mounted on 2002 STERLING Model LT9500 Tandem Axle Truck, VIN# 2FZHAZAS42AJ64107, powered by Cat C12 diesel engine and Eaton 8LL, 10 speed transmission, equipped with 22′ flatbed, 40,000# rears, 20,000# front axle, walking beam suspension, 2-position engine brake, 60,000# GVWR, hydraulic outriggers, 425/65R22.5 front and 11R22.5 rear tires. In good condition with good tires. (Meter Reads 131,891 Miles) (Unit# 325) (DAY 2) (AZ) |
| 237 | $0.00 | 1997 NATIONAL Model 1195, 27 Ton Boom/Aerial Lift, s/n 29141, equipped with 28′-95′ 4-section hydraulic boom, 27′-48′ telescopic swing away jib, PAT DS150 LMI, 42″ x 72″ man basket, radio upper controls, single sheave hook block, weighted hook, behind cab mounted on 1998 FORD Model L9000 Tandem Axle Truck, VIN# 1FDZW96P0WVA33568, powered by Cummins 6 cylinder diesel engine and Eaton 8LL, 10 speed transmission, equipped with 20′ flatbed, 40,000# rears, 20,000# front axle, engine brake, spring over walking beam suspension, (4) hydraulic outriggers, hydraulic front stabilizer, heated mirrors, air conditioning, 425/65R22.5 front and 11R22.5 rear tires. In good condition with good tires. (Odometer Reads 077,287 Miles) (Meter Reads 13,789 Hours) (Unit# 323) (DAY 2) (WY) |
| 238 | $105,000.00 | 2014 (Rebuilt) PENGO Model TRCP30-3, (3) Drum Hydraulic Puller, powered by Cummins 5.9L diesel engine and Dyna Power hydrostatic transmission, equipped with 22,000′ of 5/8″ braided rope per drum, 12,000′ of 3/4″ and 10,000′ of 5/8″ per drum, (3) hydraulic fairleads, pneumatic band brakes, operators console, mounted on rebuilt Fruehauf Tandem Axle Rigid Neck Lowboy Trailer, VIN# 1271002, equipped with 36’x8’6″ deck with 10′ upper deck, push block, access ladders and catwalk, and 255/70R22.5 tires. In good to very good condition with good tires. (Trailer Completely Rebuilt and Customized) (Unit# 631) (DAY 2) (AZ) |
| 238A | $1,000.00 | (3 Reels) 21,000′ of 7/16″ Hardline, additional short sections of 3/8″ (Formerly Used on Lot #238) (DAY 2) (CO) |
| 239 | $170,000.00 | 2008 WAGNER SMITH Model T-DP-600, 20,000# Single Drum Hydraulic Puller, s/n 1W9DP32288A161010, powered by John Deere 6090 diesel engine, equipped with 21,000′ of 5/8″ hardline, fairlead, and operators console, mounted on Tandem Axle Carrier, equipped with 56,000# GVWR and 455/55 R22.5 tires. In good to very good condition with good tires. (Unit# 660) (DAY 2) (CO) |
| 240 | $235,000.00 | 2009 NORTH AMERICAN Model D-3, (3) Drum Hydraulic Hardline Puller, s/n 0103, powered by John Deere 4045 diesel engine, hydrostatic transmission, equipped with 20,000′ of 7/16″ hardline per drum, elevating operators cab with heat and air conditioning, and hydraulic fairlead, mounted on 2000 Peterbilt Model 357, 6×6 Carrier, VIN# 1NPAMA0X6YN526801, powered by Cat 3306 diesel engine and Fuller 8LL, 10 speed transmission, equipped with 46,000# rears, 22,000# front axle, 68,000# GVWR, walking beam suspension, air conditioning and 445/65 R22.5 front and 12R 22.5 rear tires. In good condition with good tires. (Odometer Reads 0,101,443 Miles) (Upper Meter Reads 02,148 Hours) (Truck Meter Reads 4,605 Hours) (Unit# 610) (DAY 2) (CO) |
| 241 | $32,000.00 | AMERICAN (3) Drum Hydraulic Hardline Puller, powered by John Deere diesel engine and hydrostatic transmission, equipped with 18,000′ of 3/8″ hardline per drum, operators console, and hydraulic fairlead, mounted on 1975 Diamond REO Model DC1066D, 6×6 Carrier, VIN# DRB66HC607521, powered by Detroit 6-53 diesel engine and Fuller 13 speed transmission, equipped with walking beam transmission and 385/65 R22.5 front and 11R22.5 rear tires. In fair to good condition with fair to good tires. (Odometer Reads 356,567 Miles) (Hardline Replaced Recently) (Unit# 602) (DAY 2) (CO) |
| 242 | $25,500.00 | 2007 WAGNER SMITH Model T-4DP-75, (4) Drum rope Puller, s/n 1W9DP192X7B161142, powered by John Deere 4 cylinder diesel engine, equipped with 8,500′ of 5/8″ Samson rope per drum, hydraulic fairleads, and operators console, mounted on 1998 International Model 4900, 6×6 Carrier, VIN# 1HTSJAAR4WH514553, powered by DT466 diesel engine and automatic transmission, equipped with 16′ steel flatbed, spring over walking beam suspension, 54,000# GVWR, and 12R22.5 tires. In good condition with good tires. (Odometer Reads 012,419 Miles) (Unit# 661) (DAY 2) (WY) |
| 243 | $4,000.00 | MORGAN Model LH74 (3) Drum Hydraulic Rope Puller, s/n 20, powered by Ford 6 cylinder gas engine, equipped with 10,000′ of 5/8″ braided rope per drum and hydraulic fairlead, mounted on 1987 Ford Model LT9000 Tandem Axle Carrier, VIN# 1FDYU90L1HVA08365, powered by Cummins 270HP diesel engine and Fuller 13 speed transmission, equipped with 18′ flatbed, spring over walking beam suspension, 50,000# GVWR, engine brake, double frame, and 11R22.5 tires. In good condition with good tires. (Odometer Reads 287,808 Miles) (Unit# 606) (DAY 2) (AZ) |
| 244 | $4,000.00 | MORGAN Model LH28, (3) Drum Rope Puller, powered by Ford 6 cylinder gas engine, equipped with (1) 20,000′ and (2) 12,000′ of 1/2″ Samson rope drums, operators console, and hydraulic fairlead, mounted on 1991 Ford Model L9000 Tandem Axle Carrier, VIN# 1D48135COLO, powered by Cummins N14 diesel engine and Eaton 9 speed transmission, equipped with air ride suspension, 48,000# GVWR, and 11R 22.5 tires. In fair to good condition with fair to good tires. (Odometer Reads 374,015 Miles) (Extra Drum With Rope) (Unit# 603) (DAY 2) (CO) |
| 245 | $500.00 | Single Drum Rope Puller, powered by Ford V-8 gas engine, equipped with 10,000′ of 3/4″ Samson rope, operators console, and hydraulic fairlead, mounted on 1973 Chevrolet Model C65 Single Axle Carrier, VIN# CCE663V125973, powered by Chevrolet gas engine and automatic transmission, equipped with air brakes, spring suspension, 23,000# GVWR, and 10.00R20 tires. In good condition with good tires. (Odometer Reads 29,044 Miles) (Unit# 604) (DAY 2) (WY) |
| 246 | $80,500.00 | Single Drum Rewind Machine, powered by Cummins 5.9L diesel engine and automatic transmission, equipped with 7′ collapsible self unloading rewind reel and hydraulic fairlead, operators console, mounted on 1981 IHC Model F5070, 6×6 Carrier, VIN# 1HTD32174BGB14129, powered by Cummins NTC290 diesel engine and 5 speed transmission with 2 speed transfer case, equipped with 20′ steel flatbed, 3-position engine brake, double frame, spring over walking beam suspension, and 425/65R22.5 tires. In good condition with good tires. (Odometer Reads 305,704 Miles) (Unit# 607) (DAY 2) (AZ) |
| 247 | $22,000.00 | 2008 WAGNER SMITH Model T-DPT-90 Single Drum Hydraulic Puller, s/n 1W9DP20288C161168, powered by John Deere 4045, 4 cylinder diesel engine, equipped with 18,000′ of 1/2″ Samson poly rope, hydraulic fairlead, and operators console, mounted on Tandem Axle Trailer, equipped with 18,100# GVWR and 215/75R17 tires. In good condition with good tires. (Meter Reads 61.5 Hours) (Unit# 664) (DAY 2) (AZ) |
| 248 | $49,000.00 | 2003 WAGNER SMITH Model T-VBWPT-340-72 V-Groove Puller, s/n 1W9BP25173C161002, powered by John Deere 6 cylinder diesel engine, equipped with 10,000# line pull, self loading, hydraulic take-up reel, and operators console, mounted on Single Axle Trailer, equipped with 25,674# GVWR and 425/65R22.5 tires. In good condition with good tires. (Meter Reads 469 Hours) (Year 2002 On Title) (Unit# 608) (DAY 2) (WY) |
| 248A | $5,700.00 | 84″ Take Apart Reel, with 45″ width and 5″ arbor (DAY 2) (WY) (Sales Tax) |
| 248B | $5,700.00 | 84″ Take Apart Reel, with 45″ width and 5″ arbor (DAY 2) (WY) (Sales Tax) |
| 250 | $2,100.00 | Single Drum Hydraulic Rope Puller, powered by Chevrolet V-8 gas engine, equipped with hydraulic fairlead and operators console, mounted on 2003 Tandem Axle Gooseneck Trailer, VIN# S42520W, equipped with 265/75R16 tires. In good condition with good tires. (Unit# 638) (DAY 2) (WY) |
| 250A | $9,000.00 | 2003 Shop Made Tandem Axle Reel Trailer, VIN# S42807W, (4) removable reels with approximately 8,000′ Samson rope each, and spring suspension. In good condition with good tires. (Unit# 609) (DAY 2) (WY) |
| 251 | $5,000.00 | UTAH SPROCKET 60″, 2-Bundle Bull Wheel Tensioner, powered by Isuzu 3 cylinder diesel engine/power unit, equipped with neoprene lined, fairlead roller assemblies, retarder brake system, and operators console, mounted on 1990 Mack Model CH612 Tandem Axle Carrier, VIN# 1M1AA02X3LW001284, powered by Mack E7-350, 350 HP diesel engine and Eaton 9 speed transmission, equipped with engine brake, air ride suspension, air conditioning, cruise control and 11R 24.5 tires. In good condition with good tires. (Odometer Reads 502,359 Miles) (24,932 Truck Hours) (Unit# 662) (DAY 2) (CO) |
| 252 | $66,000.00 | 2010 WAGNER SMITH Model T-BWT-10-72, 72″ Portable Hydraulic Bull Wheel Tensioner, s/n 1W9BT272XAC161106, powered by John Deere 4 cylinder diesel engine, equipped with 10,000# capacity, neoprene lined, hydraulic fluid brakes, operators console, and fairlead roller assembly, mounted on Tandem Axle Trailer, equipped with 27,800# GVWR and 245/70R 17.5 tires. In good condition with good tires. (Additional Extra Wide Segments For T2 Wire) (Unit# 625) (DAY 2) (CO) |
| 253 | $19,000.00 | 2011 WAGNER SMITH Model T-BWT-5-52-RC, 52″ Portable Combination Bull Wheel Tensioner/Reel Carrier, s/n 1W9RT2129BC161090, equipped with neoprene lined, hydraulic twin disc brakes, 96″ max reel diameter, and operators console, mounted on Tandem Axle Trailer, equipped with 18,200# GVWR and 215/75R17.5 tires. In good condition with good tires. (Unit# 644) (DAY 2) (WY) |
| 254 | $7,500.00 | 2007 WAGNER SMITH Model T-BWT-4-60, 60″ Fiberoptic Bull Wheel Tensioner, s/n 1W9BT17137C161183, equipped with 4,000# capacity, neoprene lined, manual hydraulic brakes, operators console, mounted on Single Axle Trailer, equipped with 215/75R17.5 tires. In good condition with good tires. (Unit# 624) (DAY 2) (AZ) |
| 255 | $1,000.00 | 1988 SHERMAN REILLY Model BWT-1303-RC-T, 30″ Portable Combination Bull Wheel Tensioner/Reel Carrier, s/n 123WM1518J1T16040, equipped with neoprene lined, disc brakes, reel stand, 84″ diameter capacity with 40″ width, on Single Axle Trailer. In good condition with good tires. (Unit# 637) (DAY 2) (WY) |
| 256 | $350.00 | 1976 PENGO Model 6042TRII, 42″ Tilted Bull Wheel Tensioner, s/n 605-31, equipped with neoprene lined, hydraulic brakes, surge control package, roller fairlead assembly, and operators console, mounted on Single Axle Trailer, equipped with 10R 22.5 tires. In fair to good condition with fair to good tires. (No Title) (Unit# 627) (DAY 2) (CO) |
| 257 | $200.00 | 1982 PENGO Model TRBWT1048, 48″ Offset Bull Wheel Tensioner, s/n IDTL052434AA, equipped with neoprene lined, hydraulic brakes, surge control package, roller fair lead assembly, mounted on Single Axle Trailer, equipped with 9.00-20 tires. In fair to good condition with fair to good tires. (Unit# 629) (DAY 2) (CO) |
| 258 | $350.00 | 1968 PENGO Model 6042XHD-TR-1, 42″ Offset Bull Wheel Tensioner, s/n 609-2, equipped with neoprene lined, hydraulic brakes, surge control package, operators console, mounted on Single Axle Trailer, equipped with 9.00-20 tires. In good condition with good tires. (No Title) (Unit# 615) (DAY 2) (CO) |
| 259 | $1,000.00 | PENGO Model 6000-XHD SK7, 42″ Bull Wheel Tensioner, s/n 6000-130, equipped with neoprene lined, manual brake and operators console, mounted on Tandem Axle Tag-A-Long Trailer, VIN# 0500253, equipped with 8’x20′ level deck and 235/85R16 tires. In fair to good condition with good tires. (Unit# 611) (DAY 2) (AZ) |
| 259A | $500.00 | (3) Drum Hydraulic Rope Puller, powered by Wisconsin 4 cylinder gas engine and hydraulic power unit, equipped with 1/2″ Samson rope and hydraulic fairleads, mounted on shop made Tandem Axle Trailer, VIN# DRXMVB000283891M0. In fair condition with fair tires. (Unit# 619) (DAY 2) (CO) |
| 260 | $750.00 | MORGAN Model LH28 Hydraulic Power Reel Stand, s/n 203, equipped with hydraulic fairlead, mounted on 1987 GMC Brigadier Tandem Axle Carrier, VIN# 1GDT9C4Z4HV524002, powered by Detroit 6-71 diesel engine and automatic transmission, equipped with 16′ steel flatbed, 50,000# GVWR, and spring over walking beam suspension. In good condition with good tires. (Odometer Reads 167,947 Miles) (Unit# 623) (DAY 2) (WY) |
| 261 | $750.00 | MORGAN Model LH-28, 8′ Hydraulic Power Reel Stand, mounted on 1984 IHC Model 1954 Single Axle Carrier, VIN# 1HTAA1950EHA17952, powered by IHC DT466 diesel engine and 5 speed transmission with 2 speed rear, equipped with 13′ steel flatbed and 11R22.5 tires. In good condition with good tires. (Odometer Reads 680,093 Miles) (Unit# 626) (DAY 2) (AZ) |
| 262 | $2,000.00 | 2000 WAGNER SMITH 96″ x 60″ Reel Stand, s/n 1W9RS0905YA161151, equipped with manual hydraulic disc brake and 5″ arbor. In good condition. (Unit# 652) (DAY 2) (AZ) |
| 262A | $2,000.00 | 2008 Wagner Smith 96″ x 72″ reel stand s/n 3087 equipped with manual disc brake. In good condition. (DAY 2) (CO) |
| 262B | $3,000.00 | 96″ x 72″ Reel stand equipped with hydraulic fluid brake (No Power Unit) (DAY 2) (CO) |
| 263 | $50.00 | 36″ Skid Mounted offset tensioner (DAY 2) (CO) |
| 264 | $29,000.00 | 1993 FREIGHTLINER Model M916A1 6×6 Winch Truck Tractor, VIN# 1FUCMZYB6PP529586, powered by Detroit Series 60, diesel engine and Allison automatic transmission, equipped with Tulsa 45,000# winch, 52,000# rears, 16,000# front axle, Hendrickson spring over walking beam suspension, engine brake, and air slide 5th wheel. In good condition with good tires. (Odometer Reads 096,122 Miles) (Unit# 729) (DAY 2) (CO) |
| 265 | $7,000.00 | 1979 AMERICAN GENERAL Model M916 6×6 Winch Truck Tractor, VIN# NM167442, Cummins NTC400 diesel engine and Cat 7155 semi-automatic 16 speed transmission, 45,000# hydraulic winch, rolling tailboard, tow package, air slide 5th wheel, double frame, spring over walking beam suspension, hydraulic outriggers, and 11R24 tires. In good condition with good tires. (Odometer Reads 23,803 Miles) (Unit# 731) (DAY 2) (AZ) |
| 266 | $3,500.00 | 1965 KENWORTH Model 923 6×6 Winch Truck Tractor, VIN# 82168, powered by Detroit 6V92 diesel engine and 10 speed transmission, equipped with mechanical winch, stationary 5th wheel, spring suspension, and 10.00R20 tires. In fair to good condition with fair to good tires. (Odometer Reads 12,408 Miles) (Unit# 701) (DAY 2) (WY) |
| 267 | $3,250.00 | 1964 KENWORTH Model 923 6×6 Truck Tractor, VIN# 81868, powered by Cummins diesel engine and Roadranger 8 speed transmission, equipped with air slide 5th wheel and spring suspension. In fair condition with good tires. (Odometer Reading N/A) (Unit# 700) (DAY 2) (WY) |
| 268 | $37,500.00 | 1974 CATERPILLAR Model D7F Crawler Winch Tractor, s/n 94N08634, powered by Cat 3306 diesel engine and powershift transmission, equipped with straight blade, (3) Pleeco 30,000# hydraulic winches, enclosed ROPS cab, and 24″ SBG pads. In good condition with fair undercarriage. (Very Good Chains) (Meter Reads 1,630 Hours) (Unit# 528) (DAY 2) (CO) |
| 269 | $5,000.00 | M-4 Crawler Sagging Tractor, s/n M4A15632, powered by John Deere 4 cylinder diesel engine and direct drive transmission, equipped with (3) Garwood 40,000# waterfall sag winches with 3/4″ wire rope, front anchor winch and 12″ steel tracks. In fair to good condition with good undercarriage. (Meter Reads 4,126 Hours) (Unit# 502) (DAY 2) (WY) (SALES TAX) |
| 270 | $2,250.00 | M-4 Crawler Sagging Tractor, s/n 444153311, powered by Detroit 4-71 diesel engine and direct drive transmission, equipped with (3) Braden 30,000# waterfall sag winches with 3/4″ wire rope, 12″ steel tracks. In fair to good condition with good undercarriage. (Unit# 503) (DAY 2) (WY) (SALES TAX) |
| 271 | $2,250.00 | M-4 Crawler Sagging Tractor, s/n 44403328, powered by Detroit 4-71 diesel engine and direct drive transmission, equipped with (3) 30,000# Braden waterfall sag winches, and 12″ steel tracks. In fair to good condition with fair to good undercarriage. (Unit# 507) (DAY 2) (AZ) |
| 272 | $2,700.00 | M-5 Track Vehicle, s/n 4704, powered by Cummins 6 cylinder diesel engine and direct drive transmission, equipped with 12″ steel tracks. In fair condition with fair undercarriage. (Unit# 501) (DAY 2) (CO) |
| 273 | $5,000.00 | 1981 INTERNATIONAL Model TD15C Crawler Winch Tractor, s/n 4240002U005298, powered by Int’l diesel engine and powershift transmission, equipped with hydraulic folding U-blade, Carco F50 winch, ROPS canopy, and 20″ SBG pads. In fair condition with good undercarriage. (Meter Reads 5,508 Hours) (Winch Not Operating) (Unit# 522) (DAY 2) (WY) (SALES TAX) |
| 274 | $10,000.00 | 1985 JOHN DEERE Model 548D Sagging Tractor, s/n 512599, powered by John Deere diesel engine and powershift transmission, equipped with (4) DP 20,000# hydraulic free spooling sag winches, stacking blade, ROPS canopy with sweeps and screens, and 28L-26 tires. In good condition with good tires. (Meter Reads 18,840 Hours) (Unit# 533) (DAY 2) (AZ) |
| 275 | $4,000.00 | 1974 CASE Model 825 Transport Skidder, s/n 9116798, powered by Case diesel engine and powershift transmission, equipped with 5th wheel, front and rear hydraulic push blades, ROPS canopy with sweeps, and 23.1-26 tires. In fair condition with fair tires. (Meter Reads 0,322 Hours) (No Serial Number Plate) (Unit# 529) (DAY 2) (WY) (SALES TAX) |
| 276 | $2,750.00 | 1954 MACK Model M63 6×6 Sleeving Truck, VIN# 555, powered by Cat 3208 diesel engine and 5 speed transmission, equipped with 12′ steel flatbed, sleeving body including (2) hydraulic winches, Greenlee 10,000PSI hydraulic pump, adjustable sleeving table, rear controls, and spring suspension. In fair to good condition with good tires. (Odometer Reads 28,499 Miles) (No Title) (Unit# 641) (DAY 2) (AZ) |
| 277 | $3,500.00 | HI-RANGER Model 10-90I, 90′ Aerial “Line Guard” Tower, s/n 4757699, powered by 4 cylinder diesel engine, equipped with hydraulic folding lattice boom and hydraulic outriggers, mounted on 1974 Dorsey Tandem Axle Trailer, VIN# 108714, equipped with 8′ width and 11R 22.5 tires. In fair condition with good tires. (Meter Reads 0874 Hours) (Unit# 854) (DAY 2) (CO) |
| 278 | $900.00 | HI-RANGER Model 7-75, 75′ Aerial “Line Guard” Tower, s/n 12641138, powered by Detroit 4-53 diesel engine, equipped with hydraulic folding lattice boom and (2) hydraulic outriggers, mounted on 1979 Fruehauf Single Axle Step Deck Trailer, VIN# FWV465701, equipped with 8’6″x8′ upper deck, 34′ lower deck, and 11R22.5 tires. In fair to good condition with good tires. (No VIN# Plate) (Unit# 853) (DAY 2) (AZ) |
| 279 | $15,750.00 | 1977 LOAD KING Tri-Axle Step Deck Reel Trailer, VIN# 6709, equipped with 8′ x 10′ upper deck, 34’6″ lower deck, (3) 96″ x 60″ reel stands with manual band brakes, air ride suspension, and 10.00×15 tires. In good condition with good tires. (No VIN# Plate) (Unit# 802) (DAY 2) (AZ) |
| 280 | $15,750.00 | 1974 UTILITY Model LS2 Tandem Axle Step Deck Reel Trailer, VIN# 7N46660002, equipped with 8′ x 10′ upper deck, 30′ lower deck, (4) Pengo 96″ x 72″ reel stands with hydraulic brakes, powered by 4 cylinder gas/hydraulic power unit, outriggers, chain dogs and 11R24.5 tires. In fair to good condition with good tires. (Meter Reads 0,674 Hours) (Unit# 634) (DAY 2) (CO) |
| 281 | $15,750.00 | 1950 FRUEHAUF Tandem Axle Reel Trailer, VIN# X2535, (3) 96″ x 66″ reel stands, mechanical band brakes. In good condition with good tires. (VIN# From Title) (Unit# 630) (DAY 2) (WY) |
| 283 | $1,100.00 | 2001 Shop Made Single Axle Gooseneck Reel Trailer, VIN# 0375563, equipped with (1) 96″ x 72″ reel stand with hydraulic brake and 7.50 R16 tires. In good condition. (No VIN# Plate) (Unit# 635) (DAY 2) (CO) |
| 284 | $1,100.00 | 2001 Shop Made Single Axle Gooseneck Reel Trailer, VIN# 0375564, equipped with (1) 96″ x 72″ reel stand with hydraulic brake and 7.50-16 tires. In good condition. (Unit# 636) (DAY 2) (CO) |
| 285 | $800.00 | Shop Made Track Mounted Pole Trailer, equipped with 30′ deck, 25″ rubber tracks. In fair to good condition with fair tracks. (Unit# 538) (DAY 2) (CO) |
| 286 | $21,000.00 | 1998 DELOUPE Tandem Axle Pole Trailer, VIN# 2D9KD39B6W1004230, equipped with cable steer, 44′ extendable frame, pole bunks, and spring suspension and 11R 24.5 tires. In good condition with good tires. (No VIN# Plate) (Unit# 831) (DAY 2) (CO) |
| 287 | $10,000.00 | 2008 Shop Made Tandem Axle Pole Trailer, VIN# S45278W, equipped with approximate 40′ extendable frame, and 295/75R 22.5 tires. In fair to good condition with good tires. (Unit# 830) (DAY 2) (CO) |
| 288 | $900.00 | 1978 RENCO Tandem Axle 40′ Extendable Pole Trailer, VIN# 7731S, equipped with pole bunks, spring suspension, and 11R24.5 tires. In fair condition with good tires. (No VIN# Plate) (Unit# 822) (DAY 2) (AZ) |
| 289 | $600.00 | 1987 PEERLESS Tandem Axle Pole Trailer, VIN# 1PLA02426HTB82330, equipped with approximately 40′ extendable frame, pole bunk, spring suspension, pintle hitch, and 11R24.5 tires. In fair to good condition with fair tires. (No VIN# Plate) (Unit# 827) (DAY 2) (WY) |
| 290 | $12,000.00 | 1968 Shop Made Tandem Axle Pole Trailer, VIN# SNTR72205MONT, equipped with extendable frame to approximate 65′, pole bunks, cable steer, spring suspension and 10.00 R20 tires. In fair condition with good tires. (No VIN# Plate) (Unit# 820) (DAY 2) (CO) |
| 290A | $0.00 | AUCTIONEER’S IMPORTANT NOTICE: Lots #291 thru #323 and Lots #327 thru #392 Will Be Sold by The Block (high bid is multiplied by the number of blocks in the lot) |
| 291 | $4,500.00 | (3) 32″, 20,000# Grounded Helicopter Bundle Blocks, with header bar and rack (DAY 2) (CO) |
| 292 | $4,500.00 | (3) 32″, 20,000# Grounded Helicopter Bundle Blocks, with header bar and rack (DAY 2) (CO) |
| 293 | $4,500.00 | (3) 32″, 20,000# Grounded Helicopter Bundle Blocks, with header bar and rack (DAY 2) (CO) |
| 294 | $4,500.00 | (3) 32″, 20,000# Grounded Helicopter Bundle Blocks, with header bar and rack (DAY 2) (CO) |
| 295 | $4,500.00 | (3) 32″, 20,000# Helicopter Bundle Blocks, header bar and rack (DAY 2) (CO) |
| 296 | $4,500.00 | (3) 32″, 20,000# Helicopter Bundle Blocks, header bar and rack (DAY 2) (CO) |
| 297 | $4,500.00 | (3) 32″, 20,000# Helicopter Bundle Blocks, header bar and rack (DAY 2) (CO) |
| 298 | $4,500.00 | (3) 32″, 20,000# Helicopter Bundle Blocks, header bar and rack (DAY 2) (CO) |
| 299 | $4,500.00 | (3) 32″, 20,000# Helicopter Bundle Blocks, header bar and rack (DAY 2) (CO) |
| 300 | $4,500.00 | (3) 32″, 20,000# Helicopter Bundle Blocks, header bar and rack (DAY 2) (CO) |
| 301 | $4,500.00 | (3) 32″, 20,000# Helicopter Bundle Blocks, header bar and rack (DAY 2) (CO) |
| 302 | $4,500.00 | (3) 32″, 20,000# Helicopter Bundle Blocks, header bar and rack (DAY 2) (CO) |
| 303 | $4,500.00 | (3) 32″, 20,000# Helicopter Bundle Blocks, header bar and rack (DAY 2) (CO) |
| 304 | $4,500.00 | (3) 32″, 20,000# Helicopter Bundle Blocks, header bar and rack (DAY 2) (CO) |
| 305 | $4,500.00 | (3) 32″, 20,000# Helicopter Bundle Blocks, header bar and rack (DAY 2) (CO) |
| 306 | $4,500.00 | (3) 32″, 20,000# Helicopter Bundle Blocks, header bar and rack (DAY 2) (CO) |
| 307 | $4,500.00 | (3) 32″, 20,000# Helicopter Bundle Blocks, header bar and rack (DAY 2) (CO) |
| 308 | $4,500.00 | (3) 32″, 20,000# Helicopter Bundle Blocks, header bar and rack (DAY 2) (CO) |
| 309 | $4,500.00 | (3) 32″, 20,000# Helicopter Bundle Blocks, header bar and rack (DAY 2) (CO) |
| 310 | $4,500.00 | (3) 32″, 20,000# Helicopter Bundle Blocks, header bar and rack (DAY 2) (CO) |
| 311 | $3,600.00 | (3) 32″, 20,000# Helicopter Bundle Blocks, header bar and rack (DAY 2) (CO) |
| 312 | $3,450.00 | (3) 32″, 20,000# Helicopter Bundle Blocks, header bar and rack (DAY 2) (CO) |
| 313 | $3,450.00 | (3) 32″, 20,000# Helicopter Bundle Blocks, header bar and rack (DAY 2) (CO) |
| 314 | $3,450.00 | (3) 32″, 20,000# Helicopter Bundle Blocks, header bar and rack (DAY 2) (CO) |
| 315 | $3,450.00 | (3) 32″, 20,000# Helicopter Bundle Blocks, header bar and rack (DAY 2) (CO) |
| 316 | $3,150.00 | (3) 32″, 20,000# Helicopter Bundle Blocks, header bar and rack (DAY 2) (CO) |
| 317 | $3,150.00 | (3) 32″, 20,000# Bundle Blocks, header bar and rack (DAY 2) (CO) |
| 318 | $3,150.00 | (3) 32″, 20,000# Bundle Blocks, header bar and rack (DAY 2) (CO) |
| 319 | $3,150.00 | (3) 32″, 20,000# Bundle Blocks, header bar and rack (DAY 2) (CO) |
| 320 | $3,150.00 | (3) 32″, 20,000# Bundle Blocks, header bar and rack (DAY 2) (CO) |
| 321 | $3,150.00 | (3) 32″, 20,000# Bundle Blocks, header bar and rack (DAY 2) (CO) |
| 322 | $3,150.00 | (3) 32″, 20,000# Bundle Blocks, header bar and rack (DAY 2) (CO) |
| 323 | $3,150.00 | (1) 30″ and (2) 28″, 20,000# Bundle Blocks, with rack (DAY 2) (CO) |
| 324 | $4,250.00 | BETHEA 30,000# Gator Board, with swivels (DAY 2) (CO) |
| 325 | $4,250.00 | BETHEA 30,000# Gator Board, with swivels (DAY 2) (CO) |
| 326 | $150.00 | (2 Pallets) Bundle Block Parts (DAY 2) (CO) |
| 327 | $750.00 | (3) LINDSEY 28″ Bundle Blocks (DAY 2) (CO) |
| 328 | $1,350.00 | (9) Assorted 28″ Bundle Blocks (DAY 2) (CO) |
| 329 | $2,100.00 | (3) WAGNER SMITH 36″, 12,000# Full Frame Stringing Blocks (DAY 2) (CO) |
| 330 | $6,800.00 | (8) 28″ Helicopter Stringing Blocks (DAY 2) (CO) |
| 331 | $6,800.00 | (8) 28″ Helicopter Stringing Blocks (DAY 2) (CO) |
| 332 | $6,800.00 | (8) 28″ Helicopter Stringing Blocks (DAY 2) (CO) |
| 333 | $6,800.00 | (8) 28″ Helicopter Stringing Blocks (DAY 2) (CO) |
| 334 | $6,800.00 | (8) 28″ Helicopter Stringing Blocks (DAY 2) (CO) |
| 335 | $6,800.00 | (8) 28″ Helicopter Stringing Blocks (DAY 2) (CO) |
| 336 | $4,000.00 | (8) 28″ Helicopter Stringing Blocks (DAY 2) (CO) |
| 337 | $4,000.00 | (8) 28″ Helicopter Stringing Blocks (DAY 2) (CO) |
| 338 | $4,000.00 | (8) 28″ Helicopter Stringing Blocks (DAY 2) (CO) |
| 339 | $4,000.00 | (8) 28″ Helicopter Stringing Blocks (DAY 2) (CO) |
| 340 | $4,000.00 | (8) 28″ Helicopter Stringing Blocks (DAY 2) (CO) |
| 341 | $4,000.00 | (8) 28″ Helicopter Stringing Blocks (DAY 2) (CO) |
| 342 | $4,400.00 | (8) 28″ Helicopter Stringing Blocks (DAY 2) (CO) |
| 343 | $4,400.00 | (8) 28″ Helicopter Stringing Blocks (DAY 2) (CO) |
| 344 | $4,400.00 | (8) 28″ Helicopter Stringing Blocks (DAY 2) (CO) |
| 345 | $3,300.00 | (6) 28″ Helicopter Stinging Blocks (DAY 2) (CO) |
| 346 | $150.00 | (3) PENGO 28″ Full Frame Stringing Blocks (DAY 2) (CO) |
| 347 | $600.00 | (6) MORGAN 28″ Stringing Blocks (DAY 2) (CO) |
| 348 | $1,225.00 | (7) 28″ Full Frame Stringing Blocks (DAY 2) (CO) |
| 349 | $1,225.00 | (7) 28″ Full Frame Stringing Blocks (DAY 2) (CO) |
| 350 | $1,225.00 | (7) 28″ Full Frame Stringing Blocks (DAY 2) (CO) |
| 351 | $1,225.00 | (7) 28″ Full Frame Stringing Blocks (DAY 2) (CO) |
| 352 | $1,225.00 | (7) 28″ Full Frame Stringing Blocks (DAY 2) (CO) |
| 353 | $1,225.00 | (7) 28″ Full Frame Stringing Blocks (DAY 2) (CO) |
| 354 | $1,225.00 | (7) 28″ Full Frame Stringing Blocks (DAY 2) (CO) |
| 355 | $1,225.00 | (7) 28″ Full Frame Stringing Blocks (DAY 2) (CO) |
| 356 | $1,225.00 | (7) 28″ Full Frame Stringing Blocks (DAY 2) (CO) |
| 357 | $1,225.00 | (7) 28″ Full Frame Stringing Blocks (DAY 2) (CO) |
| 358 | $1,050.00 | (7) 28″ Full Frame Stringing Blocks (DAY 2) (CO) |
| 359 | $1,050.00 | (7) 28″ Full Frame Stringing Blocks (DAY 2) (CO) |
| 360 | $1,050.00 | (7) 28″ Full Frame Stringing Blocks (DAY 2) (CO) |
| 361 | $1,050.00 | (7) 28″ Full Frame Stringing Blocks (DAY 2) (CO) |
| 362 | $1,050.00 | (7) 28″ Full Frame Stringing Blocks (DAY 2) (CO) |
| 363 | $1,050.00 | (7) 28″ Full Frame Stringing Blocks (DAY 2) (CO) |
| 364 | $1,050.00 | (7) 28″ Full Frame Stringing Blocks (DAY 2) (CO) |
| 365 | $1,050.00 | (7) 28″ Full Frame Stringing Blocks (DAY 2) (CO) |
| 366 | $1,050.00 | (7) 28″ Full Frame Stringing Blocks (DAY 2) (CO) |
| 367 | $1,050.00 | (7) 28″ Full Frame Stringing Blocks (DAY 2) (CO) |
| 368 | $1,050.00 | (7) 28″ Full Frame Stringing Blocks (DAY 2) (CO) |
| 369 | $2,400.00 | (12) 22″ Helicopter Stringing Blocks (DAY 2) (CO) |
| 370 | $2,400.00 | (12) 22″ Helicopter Stringing Blocks (DAY 2) (CO) |
| 371 | $2,400.00 | (12) 22″ Helicopter Stringing Blocks (DAY 2) (CO) |
| 372 | $2,400.00 | (12) 22″ Helicopter Stringing Blocks (DAY 2) (CO) |
| 373 | $2,400.00 | (12) 22″ Helicopter Stringing Blocks (DAY 2) (CO) |
| 374 | $2,400.00 | (12) 22″ Helicopter Stringing Blocks (DAY 2) (CO) |
| 375 | $2,400.00 | (12) 22″ Helicopter Stringing Blocks (DAY 2) (CO) |
| 376 | $2,400.00 | (12) 22″ Helicopter Stringing Blocks (DAY 2) (CO) |
| 377 | $3,200.00 | (16) 22″ Helicopter Stringing Blocks (DAY 2) (CO) |
| 378 | $2,400.00 | (12) 22″ Full Frame Stringing Blocks (DAY 2) (CO) |
| 379 | $2,400.00 | (12) 22″ Full Frame Stringing Blocks (DAY 2) (CO) |
| 380 | $2,400.00 | (12) 22″ Full Frame Stringing Blocks (DAY 2) (CO) |
| 381 | $3,000.00 | (15) 22″ Full Frame Stringing Blocks (DAY 2) (CO) |
| 382 | $2,600.00 | (13) 22″ Full Frame Stringing Blocks (DAY 2) (CO) |
| 383 | $2,700.00 | (6) SHERMAN REILLY 22″ Helicopter Stringing Blocks (DAY 2) (CO) |
| 384 | $3,600.00 | (8) SHERMAN REILLY 22″ Helicopter Stringing Blocks (DAY 2) (CO) |
| 385 | $4,050.00 | (9) SHERMAN REILLY 22″ Helicopter Stringing Blocks (DAY 2) (CO) |
| 386 | $4,050.00 | (9) SHERMAN REILLY 22″ Helicopter Stringing Blocks, with uplift rollers (DAY 2) (CO) |
| 387 | $10,500.00 | (35) 16″ Helicopter Stringing Blocks (DAY 2) (CO) |
| 388 | $8,500.00 | (34) 16″ Helicopter Stringing Blocks (DAY 2) (CO) |
| 389 | $5,250.00 | (21) 16″ Helicopter Stringing Blocks (DAY 2) (CO) |
| 390 | $2,550.00 | (34) 16″ Full Frame Stringing Blocks (DAY 2) (CO) |
| 391 | $2,550.00 | (34) 16″ Full Frame Stringing Blocks (DAY 2) (CO) |
| 392 | $1,725.00 | (23) 16″ Full Frame Stringing Blocks (DAY 2) (CO) |
| 393 | $50.00 | (30) UNUSED 16″ Stringing Block Sheaves (CO) |
| 393A | $500.00 | (3 Wooden Boxes) (158) Y-Ball Clevises and (62) Shackles (DAY 2) (CO) |
| 394 | $1,400.00 | Stringing Blocks, with grounding attachments (CO) |
| 395 | $1,300.00 | Stringing Blocks, with grounding attachments (CO) |
| 396 | $450.00 | 12″ and 14″ Stringing Blocks, some with grounding attachments (CO) |
| 397 | $500.00 | X100 Grounding Block Assemblies (CO) |
| 398 | $200.00 | Grounding Attachments (CO) |
| 399 | $2,700.00 | (2 Pallet Boxes) CAMPBELL 18″ Wide Mouth Full Frame stringing Blocks (CO) |
| 400 | $850.00 | (2 Pallet Boxes) 18″ Full Frame Stringing Blocks (CO) |
| 401 | $400.00 | (29) 15″ and 14″ Full Frame Stringing Blocks (CO) |
| 402 | $50.00 | MORGAN 16″ Stringing Blocks (CO) |
| 403 | $800.00 | (13) CAMPBELL 18″ Full Frame Stringing Blocks (CO) |
| 404 | $7,750.00 | (39) BETHEA 10″ Helicopter Stringing Blocks (CO) |
| 405 | $7,750.00 | (48) CAMPBELL 10″ Helicopter Stringing Blocks (CO) |
| 406 | $2,000.00 | (36) 6″ Static Blocks (CO) |
| 407 | $6,250.00 | (93) Lined 7″ Universal Blocks (CO) |
| 408 | $4,500.00 | (76) Unlined 7″ Universal Blocks (CO) |
| 409 | $7,000.00 | (92) Unlined 7″ Universal Blocks (CO) |
| 410 | $3,500.00 | (63) Unlined 7″ Universal Blocks (CO) |
| 411 | $600.00 | Universal Block Arm Brackets (CO) |
| 412 | $350.00 | 30″ Plastic Sheave Stringing Blocks (CO) |
| 413 | $350.00 | 30″ Plastic Sheave Stringing Blocks (CO) |
| 414 | $350.00 | 30″ Plastic Sheave Stringing Blocks (CO) |
| 415 | $350.00 | 30″ Plastic Sheave Stringing Blocks (CO) |
| 416 | $350.00 | 30″ Plastic Sheave Stringing Blocks (CO) |
| 417 | $350.00 | 30″ Plastic Sheave Stringing Blocks (CO) |
| 418 | $350.00 | 30″ Plastic Sheave Stringing Blocks (CO) |
| 419 | $350.00 | 30″ Plastic Sheave Stringing Blocks (CO) |
| 420 | $350.00 | 30″ Plastic Sheave Stringing Blocks (CO) |
| 421 | $200.00 | 30″ Plastic Sheave Stringing Blocks (CO) |
| 422 | $200.00 | 30″ Plastic Sheave Stringing Blocks (CO) |
| 423 | $200.00 | 30″ Plastic Sheave Stringing Blocks (CO) |
| 424 | $200.00 | 30″ Plastic Sheave Stringing Blocks (CO) |
| 425 | $200.00 | 30″ Plastic Sheave Stringing Blocks (CO) |
| 426 | $200.00 | 30″ Plastic Sheave Stringing Blocks (CO) |
| 427 | $200.00 | 30″ Plastic Sheave Stringing Blocks (CO) |
| 428 | $275.00 | CAMPBELL 22″ Helicopter Stringing Blocks (CO) |
| 429 | $275.00 | CAMPBELL 22″ Helicopter Stringing Blocks (CO) |
| 430 | $275.00 | CAMPBELL 22″ Helicopter Stringing Blocks (CO) |
| 431 | $275.00 | CAMPBELL 22″ Helicopter Stringing Blocks (CO) |
| 432 | $275.00 | CAMPBELL 22″ Helicopter Stringing Blocks (CO) |
| 433 | $275.00 | CAMPBELL 22″ Helicopter Stringing Blocks (CO) |
| 434 | $10.00 | Helicopter Block Fly Arms (CO) |
| 435 | $10.00 | Assorted Distribution Stringing Blocks (CO) |
| 436 | $25.00 | Stringing Block Parts (CO) |
| 437 | $50.00 | 16″ Stringing Block Parts (CO) |
| 438 | $1,400.00 | (4 Crates) 22″ Stringing Block Parts (CO) |
| 439 | $1,700.00 | (4 Crates) 22″ Stringing Block Parts (CO) |
| 440 | $1,500.00 | (5 Crates) 22″ Stringing Block Parts (CO) |
| 441 | $30.00 | Plastic Sheave Stringing Block Parts (CO) |
| 442 | $2,000.00 | (5 Crates and 1 Pallet) Stringing Blocks Parts (CO) |
| 499A | $0.00 | This is the TIMED EVENT auction portion of the S.E., Incorporated Charitable Remainder Annuity Trust Auction. Items will begin to close Wednesday, June 12, 2025 10:00AM EDT. ADDITIONALLY, there will be NO PAYMENTS accepted at the auction site! Payment must be paid either by wire transfer or credit card. There will be a 3% fee on all credit card transactions. |
| 499B | $0.00 | PLEASE READ – BUYER GUIDELINES: In these days of Virtual Auctions it is critical that the prospective Buyer performs their own due diligence and we highly recommend that you conduct your own physical inspection. The year of manufacture, physical descriptions, physical condition, and hour/mileage references are to be used as a GUIDE ONLY. We do everything possible to assure accuracy, however we all are subject to errors. Year of manufacture, when available, has been verified by various date-reference publications or verification with the manufacturer. When not available, the year may be provided by the owner and so noted within the description. Hour Meter/Odometer readings represented are merely noted from a visual observation of those meters. We make no representation to accuracy. The conditions represented are assessed only from a physical walk-around and very limited operational functions. All items are sold AS-IS and NO WARRANTY of merchantability or fitness for a particular purpose is being implied. A glossary of the conditions represented, to be used as a guideline, are as follows: Excellent: New, unused, or extremely low hours. Very Good: Limited service, usually late model or close to new appearance. Good: Normal use, regular wear and tear. Fair: More than normal wear and tear, operational, but may have mechanical issues. Poor: Shows considerable wear, may be parts only, non-operational. |
| 499C | $0.00 | Items will be available for inspection beginning Tuesday, June 3rd from 8:00AM until 4:00PM and sale day mornings beginning at 7:00AM. The site is closed for the weekend. Locations: (WY) 725 Road 1, Deaver, Wyoming 82421 • (AZ) 250 East Kuehn Street, Quartzsite, Arizona 85346 • (CO) 14380 Weld County Road 100, Nunn, Colorado 80648 |
| 499D | $0.00 | Sales Tax: For all items (OTHER than titled motor vehicles) located in Wyoming, sales tax will be collected at the rate of 5% (state 4% + Big Horn County 1%) unless a valid exemption form is provided. Please note that sales tax applies to the invoice total (the purchase price and the Proxibid fee). Please send your completed exemption form via email shunyady@hunyady.com or fax (215) 361-9212 You can find a fill-in exemption form here |
| 500 | $700.00 | 2024 MILWAUKEE MX Fuel Cordless Demo Saw, with charger, (2) batteries, and abrasive blades (CO) |
| 501 | $1,100.00 | MIKASA MTX-70 Foot Compactor, Honda GX100 gas (CO) |
| 502 | $375.00 | RHINO GPD-30 Post Pounder, Honda GX35 gas (CO) |
| 503 | $90.00 | HONDA WMP20X, 2″ Centrifugal Pump, GX160 gas, with discharge hose (CO) |
| 504 | $300.00 | GENERAC GP6500 Generator, 389cc gas (CO) |
| 505 | $35.00 | LIFAN ES4100E Storm Series Generator, Lifan 7HP gas, with electric start (CO) |
| 506 | $110.00 | PREDATOR 4000 Max Watt 3200 Running Watt Generator, 212cc gas (CO) |
| 507 | $1.25 | CHICAGO 2400 Watt Generator, 5.5HP gas (CO) |
| 508 | $1.25 | Generator, Honda GX160 gas (CO) |
| 509 | $10.00 | (5) Gas Generators (Not Running) (CO) |
| 510 | $120.00 | STIHL MS390 Chain Saw (CO) |
| 511 | $100.00 | STIHL MS291 Chain Saw (CO) |
| 512 | $110.00 | STIHL MS291 Chain Saw (CO) |
| 513 | $95.00 | STIHL MS271 Chain Saw (CO) |
| 514 | $60.00 | STIHL MS271 Chain Saw (CO) |
| 515 | $210.00 | STIHL MS250 Chain Saw (CO) |
| 516 | $120.00 | STIHL MS250 Chain Saw, with log head (CO) |
| 517 | $65.00 | STIHL MS250 Chain Saw (CO) |
| 518 | $50.00 | STIHL MS171 Chain Saw (CO) |
| 519 | $35.00 | HUSQVARNA 142 Chain Saw (CO) |
| 520 | $13.00 | Chain Saw Parts and Accessories (CO) |
| 521 | $11.00 | Chain Saw Parts and Accessories (CO) |
| 522 | $21.00 | 2″ Pneumatic Pump (CO) |
| 523 | $90.00 | 2″ and 1-1/2″ Electric Submersible Pumps (CO) |
| 524 | $45.00 | 2″ Suction and Discharge Hose (CO) |
| 525 | $65.00 | (5) 3/4″ Pneumatic Impact Wrenches (CO) |
| 526 | $50.00 | (4) 3/4″ Pneumatic Impact Wrenches (CO) |
| 527 | $50.00 | (5) 1/2″ Pneumatic Impact Wrenches (CO) |
| 528 | $13.00 | (5) 1/2″ Pneumatic Impact Wrenches (CO) |
| 529 | $230.00 | Hydraulic Tamper (CO) |
| 530 | $250.00 | (3) Pneumatic Tampers (CO) |
| 531 | $500.00 | (3) Pneumatic Tampers (CO) |
| 532 | $650.00 | (3) Pneumatic Tampers (CO) |
| 533 | $500.00 | (3) Pneumatic Tampers (CO) |
| 534 | $600.00 | (3) Pneumatic Tampers (CO) |
| 535 | $650.00 | (4) Pneumatic Tampers (CO) |
| 536 | $210.00 | (3) Pneumatic Paving Breakers (CO) |
| 537 | $275.00 | (4) Pneumatic Paving Breakers (CO) |
| 538 | $500.00 | (2) Pneumatic Rock Drills and (1) Chipping Hammer (CO) |
| 539 | $110.00 | Drill Steel (CO) |
| 540 | $250.00 | Breaker Steel (CO) |
| 541 | $1.50 | Pneumatic Tamper Parts, Oilers, and Hose Fittings (CO) |
| 542 | $325.00 | CENTRAL PNEUMATIC 30 Gallon, 180 PSI 2-Stage Air Compressor, Predator 420cc gas, with electric start and lifting cage (CO) |
| 543 | $300.00 | HITACHI Air Compressor, Honda GX160 gas (CO) |
| 544 | $55.00 | LIETZ 200 Level, with tripod, sight bars, and measuring wheel (CO) |
| 545 | $350.00 | INGERSOLL RAND 1″ Drive Pneumatic Impact Wrench and Tower Assembly Tools (CO) |
| 546 | $5,250.00 | 60 Ton Steel Pole Jacking Device, single acting, 8″ stroke, and 10,000 PSI gas hydraulic pump and accessories (CO) |
| 547 | $6,000.00 | 60 Ton Steel Pole Jacking Device, double acting, 12″ stoke, and 10,000 PSI gas hydraulic pump and accessories (CO) |
| 548 | $4,200.00 | 20 Ton Steel Pole Jacking Device, single acting, 6″ stroke with 10,000 PSI gas hydraulic pump and Milwaukee cordless hydraulic pump, and accessories (CO) |
| 549 | $65.00 | 60 Ton Steel Pole Jacking Device Parts (CO) |
| 550 | $375.00 | 100 Ton Hydraulic Press Head, with hose (Leaks at Pipe Fitting) (CO) |
| 551 | $1,700.00 | ALCOA 60 Ton Hydraulic Press Head, with hose (CO) |
| 552 | $1,600.00 | ALCOA 60 Ton Hydraulic Press Head, with hose (CO) |
| 553 | $1,600.00 | ALCOA 60 Ton Hydraulic Press Head, with hose (CO) |
| 554 | $1,800.00 | ALCOA 60 Ton Hydraulic Press Head, with hose (CO) |
| 555 | $1,700.00 | ALCOA 60 Ton Hydraulic Press Head, with hose (CO) |
| 556 | $1,600.00 | ALCOA 60 Ton Hydraulic Press Head, with hose (CO) |
| 557 | $1,500.00 | ALCOA 60 Ton Hydraulic Press Head, with hose (CO) |
| 558 | $1,700.00 | ALCOA 60 Ton Hydraulic Press Head, with hose (CO) |
| 559 | $1,600.00 | ALCOA 60 Ton Hydraulic Press Head, with hose (CO) |
| 560 | $800.00 | RELIABLE REL-GB-10, 10,000 PSI Double Acting Hydraulic Pump, Briggs and Stratton gas (CO) |
| 561 | $800.00 | RELIABLE REL-GB-10, 10,000 PSI Double Acting Hydraulic Pump, Briggs and Stratton gas (CO) |
| 562 | $600.00 | BLACK & BLUE 10,000 PSI Double Acting Hydraulic Pump, Briggs and Stratton gas (CO) |
| 563 | $600.00 | BLACK & BLUE 10,000 PSI Double Acting Hydraulic Pump, Honda gas, with wired remote control (CO) |
| 564 | $375.00 | BLACK & BLUE 10,000 PSI Double Acting Hydraulic Pump, Honda gas, with wired remote control (Not Running) (CO) |
| 565 | $2,000.00 | 10,000 PSI Double Acting Hydraulic Pump, Honda 5.5HP gas (CO) |
| 566 | $1,500.00 | BVA 10,000 PSI Double Acting Hydraulic Pump, Honda GXV160 gas (CO) |
| 567 | $1,100.00 | BLACK & BLUE 10,000 PSI Double Acting Hydraulic Pump, Briggs and Stratton gas (CO) |
| 568 | $2,100.00 | RELIABLE REL-GB-10, 10,000 PSI Double Acting Hydraulic Pump, Briggs and Stratton gas (CO) |
| 569 | $1,600.00 | 60 and 100 Ton Press Head Die Set (CO) |
| 570 | $1,100.00 | 60 and 100 Ton Press Head Die Set (CO) |
| 571 | $1,400.00 | 60 and 100 Ton Press Head Die Set (CO) |
| 572 | $1,300.00 | 60 and 100 Ton Press Head Die Set (CO) |
| 573 | $1,400.00 | 60 and 100 Ton Press Head Die Set (CO) |
| 574 | $1,600.00 | 60 and 100 Ton Press Head Die Set (CO) |
| 575 | $1,500.00 | 60 and 100 Ton Press Head Die Set (CO) |
| 576 | $1,200.00 | 60 and 100 Ton Press Head Die Set (CO) |
| 577 | $55.00 | Electric Hydraulic Power Unit (CO) |
| 578 | $110.00 | RELIABLE 10,000 PSI Electric Hydraulic Pump (CO) |
| 579 | $85.00 | MARTIN DECKER 20,000# Tension Indicator (CO) |
| 580 | $210.00 | (2) Biddle Meggers (CO) |
| 581 | $60.00 | (2) Sag Scopes and Sagometer (CO) |
| 582 | $425.00 | CHANCE Protective Ground Set Tester (CO) |
| 583 | $1,200.00 | DILLON 10,000# Digital Dynamometer (CO) |
| 584 | $600.00 | (3) DILLON Dynamometers (CO) |
| 585 | $230.00 | WEJTAP Tools (CO) |
| 586 | $650.00 | BIERER 300KV Voltage Detector (CO) |
| 587 | $550.00 | BIERER 300KV Voltage Detector (CO) |
| 588 | $375.00 | SALISBURY 500KV Voltage Detector (CO) |
| 589 | $800.00 | Cable Prep Kits (CO) |
| 590 | $600.00 | Pre-Slice Cutter and Dies (CO) |
| 591 | $1,500.00 | Pre-Slice Cutter and Dies (CO) |
| 592 | $400.00 | Pre-Slice Cutter and Dies (CO) |
| 593 | $250.00 | Pre-Slice Cutter and Dies (CO) |
| 594 | $700.00 | Pre-Slice Cutter and Dies (CO) |
| 595 | $4,000.00 | CHANCE Wireless Digital Anchor Installation Torque Indicator and Accessories (CO) |
| 596 | $210.00 | Guy Wire Pulling Tools (CO) |
| 597 | $550.00 | BURNDY Y35 Hypress, with dies (CO) |
| 598 | $425.00 | BURNDY Y35 Hypress, with dies (CO) |
| 599 | $325.00 | BURNDY Y35 Hypress, with dies (CO) |
| 600 | $10.00 | ALCOA 12A Compression Tool (CO) |
| 601 | $10.00 | BROCK Compression Tool (CO) |
| 602 | $500.00 | BURNDY Hypress Dies (CO) |
| 603 | $110.00 | ANDERSON VC-6 Crimping Tool (CO) |
| 604 | $21.00 | ANDERSON VC-6 Crimping Tool (CO) |
| 605 | $5.50 | ANDERSON VC-6 Crimping Tool (CO) |
| 606 | $1.50 | ANDERSON VC-5 Crimping Tool (CO) |
| 607 | $21.00 | Manual Hydraulic Pump, with crimping accessories (CO) |
| 608 | $35.00 | (3) Manual Hydraulic Cable Cutters (CO) |
| 609 | $11.00 | (3) Manual Hydraulic Cable Cutters (CO) |
| 610 | $10.00 | (2) Hydraulic Cable Cutter Heads (CO) |
| 611 | $600.00 | (4) GREENLEE Ratchet Cable Cutters (CO) |
| 612 | $600.00 | (4) GREENLEE Ratchet Cable Cutters (CO) |
| 613 | $275.00 | GREENLEE Cable Cutter Rebuild Kits (CO) |
| 614 | $400.00 | (4) HK PORTER Ratchet Cable Cutters (CO) |
| 615 | $550.00 | (4) HK PORTER Ratchet Cable Cutters (CO) |
| 616 | $160.00 | (4) HK PORTER Ratchet Cable Cutters (CO) |
| 617 | $85.00 | (3) Ratchet and (2) Manual Cable Cutters (CO) |
| 618 | $550.00 | (4) Manual Crimping Tools, with dies (CO) |
| 619 | $400.00 | (4) Manual Crimping Tools, with dies (CO) |
| 620 | $400.00 | (4) Manual Crimping Tools, with dies (CO) |
| 621 | $21.00 | (4) Manual Crimping Tools (CO) |
| 622 | $0.00 | (4) Manual Crimping Tools (CO) |
| 623 | $22.00 | (5) Manual Crimping Tools (CO) |
| 624 | $650.00 | 4/0 Grounding Cables (CO) |
| 625 | $600.00 | 4/0 Grounding Cables (CO) |
| 626 | $650.00 | 4/0 Grounding Cables (CO) |
| 627 | $750.00 | 4/0 Grounding Cables (CO) |
| 628 | $600.00 | 4/0 Grounding Cables (CO) |
| 629 | $350.00 | 4/0 Grounding Cables (CO) |
| 630 | $325.00 | 2/0 Grounding Cables (CO) |
| 631 | $325.00 | 2/0 Grounding Cables (CO) |
| 632 | $240.00 | 4/0 and 2/0 Grounding Cables (CO) |
| 633 | $55.00 | Grounding Cable Clamps (CO) |
| 634 | $2,200.00 | Traveling Grounds (CO) |
| 635 | $600.00 | AB CHANCE Fiberglass Wire Support System (CO) |
| 636 | $500.00 | (11) AB CHANCE Shotguns (CO) |
| 637 | $850.00 | (7) HASTINGS Shotguns (CO) |
| 638 | $230.00 | AB CHANCE Hot Sticks (CO) |
| 639 | $600.00 | Hot Sticks (CO) |
| 640 | $210.00 | HASTINGS Hot Sticks (CO) |
| 641 | $550.00 | (12) Hot Sticks (CO) |
| 642 | $425.00 | (12) Hot Sticks (CO) |
| 643 | $375.00 | (2) 6′ and (1) 3’6″ AB CHANCE Platform Boards (CO) |
| 644 | $1,500.00 | Rubber Blankets and Rubber and Plastic Line Guards (CO) |
| 645 | $0.25 | (2) 7/16″ Hex Drive Hydraulic Drills (CO) |
| 646 | $1,100.00 | MILWAUKEE 1590 ACSR Cordless Cutter, with battery and charger (CO) |
| 647 | $1,700.00 | MILWAUKEE 1590 ACSR Cordless Cutter, with battery and charger (CO) |
| 648 | $1,600.00 | MILWAUKEE 1590 ACSR Cordless Cutter, with battery and charger (CO) |
| 649 | $1,600.00 | MILWAUKEE 1590 ACSR Cordless Cutter, with battery and charger (CO) |
| 650 | $3,400.00 | UNUSED MILWAUKEE 2774, 10,000 PSI Cordless Hydraulic Pump (No Battery) (CO) |
| 651 | $2,000.00 | POWER TEAM SPX PB Series 10,000 PSI Cordless Hydraulic Pump, with battery and charger (CO) |
| 652 | $1,800.00 | POWER TEAM SPX PB Series 10,000 PSI Cordless Hydraulic Pump, with battery (CO) |
| 653 | $1,500.00 | MILWAUKEE 2787 Cordless Magnetic Drill Press, with battery, charger, and accessories (CO) |
| 654 | $450.00 | MILWAUKEE 2843 Cordless Stapler, with battery and charger (CO) |
| 655 | $400.00 | MILWAUKEE 2843 Cordless Stapler, with battery and charger (CO) |
| 656 | $425.00 | MILWAUKEE 2843 Cordless Stapler, with battery and charger (CO) |
| 657 | $350.00 | MILWAUKEE 2779 Cordless Portable Band Saw, with battery and charger (CO) |
| 658 | $300.00 | MILWAUKEE 1″ Cordless Impact Wrench, with battery and charger (CO) |
| 659 | $220.00 | MILWAUKEE 3/4″ Cordless Impact Wrench, with battery and charger (CO) |
| 660 | $170.00 | MILWAUKEE 3/4″ Cordless Impact Wrench, with battery (CO) |
| 661 | $200.00 | MILWAUKEE 1/2″ Cordless Impact Wrench, with battery and charger (CO) |
| 662 | $240.00 | MILWAUKEE 1/2″ Cordless Impact Wrench, with (3) batteries and charger (CO) |
| 663 | $190.00 | MILWAUKEE 1/2″ Cordless Impact Wrench, with (2) batteries and charger (CO) |
| 664 | $140.00 | (2) MILWAUKEE 1/2″ Cordless Drills, with (1) battery (CO) |
| 665 | $85.00 | MILWAUKEE 2810, 1/2″ Cordless Drill, with battery (CO) |
| 666 | $550.00 | (2) MILWAUKEE 7/16″ Hex Drive Cordless Drills, with (2) batteries (CO) |
| 667 | $230.00 | (3) MILWAUKEE 7/16″ Hex Drive Cordless Drills, with (2) batteries (CO) |
| 668 | $50.00 | HUSKY Cordless ACSR Cutter, with (4) batteries and (2) chargers (CO) |
| 669 | $0.05 | MASTER FORCE 1/2″ Cordless Drill and 1/2″ Cordless Impact Wrench, with charger and (2) batteries (CO) |
| 670 | $550.00 | Cordless Cutter and Crimpers (No Batteries or Chargers) (CO) |
| 671 | $210.00 | (3) MILWAUKEE Battery Charging Stations (CO) |
| 672 | $400.00 | EVOLUTION ME3500 Magnetic Drill Press (CO) |
| 673 | $450.00 | HOUGEN HMD150 Magnetic Drill Press (CO) |
| 674 | $400.00 | JANCY Mag Force Magnetic Drill Press (CO) |
| 675 | $450.00 | MILWAUKEE 4245 Magnetic Drill Press (CO) |
| 676 | $11.00 | HITACHI CC12Y, 12″ Cutoff Machine (CO) |
| 677 | $50.00 | MILWAUKEE and RYOBI 7-1/4″ Circular Saws (CO) |
| 678 | $130.00 | MILWAUKEE 6230 Portable Band Saw (CO) |
| 679 | $120.00 | MILWAUKEE 6230 Portable Band Saw (CO) |
| 680 | $140.00 | MILWAUKEE 6230 Portable Band Saw (CO) |
| 681 | $1.00 | MAKITA JR3050T Reciprocating Saw (CO) |
| 682 | $0.25 | RIDGID R7120, 1/2″ Drill (CO) |
| 683 | $30.00 | (2) MILWAUKEE 1660, 1/2″ Electric Drills (CO) |
| 684 | $25.00 | (2) MILWAUKEE 1660, 1/2″ Electric Drills (CO) |
| 685 | $100.00 | GREENLEE 591 Portable Fish Tape Blower System (CO) |
| 686 | $45.00 | GREENLEE Knockout Punch Set (CO) |
| 687 | $160.00 | GREENLEE 7310 Knockout Punch Set (CO) |
| 688 | $65.00 | GREENLEE 7306 Knockout Punch Set (CO) |
| 689 | $45.00 | HITACHI DH38YE Spline Drive Hammer Drill (CO) |
| 690 | $25.00 | (2) 1/2″ Gas Powered Drills (CO) |
| 691 | $16.00 | Drill Bits (CO) |
| 692 | $21.00 | Drill Bits (CO) |
| 693 | $25.00 | Drill Bits (CO) |
| 694 | $55.00 | Drill Bits (CO) |
| 695 | $30.00 | Drill Bits (CO) |
| 696 | $30.00 | Impact Sockets and Adaptors (CO) |
| 697 | $30.00 | Assorted Sockets (CO) |
| 698 | $35.00 | (3) Fish Tapes (CO) |
| 699 | $55.00 | HILTI DX400 Powder Actuated Tool (CO) |
| 700 | $30.00 | RAMSET D60 Powder Actuated Tool (CO) |
| 701 | $45.00 | Power Cords (CO) |
| 702 | $22.00 | Radio Systems (CO) |
| 703 | $220.00 | GREENLEE Model 885 Hydraulic Conduit Bender, with 10,000PSI electric pump and Hand Benders (CO) |
| 704 | $375.00 | RIDGID Pipe Threading Tools, with 700 porta pony, and Accessories (CO) |
| 705 | $0.50 | WHITNEY Hole Punches (CO) |
| 706 | $21.00 | (5) Bolt Cutters (CO) |
| 707 | $11.00 | (5) Bolt Cutters (CO) |
| 708 | $11.00 | (5) Bolt Cutters (CO) |
| 709 | $65.00 | (3) Cable Cutters (CO) |
| 710 | $6.00 | (6) Pick Axes (CO) |
| 711 | $40.00 | (6) Sledge Hammers (CO) |
| 712 | $60.00 | (5) Sledge Hammers (CO) |
| 713 | $60.00 | (5) Sledge Hammers (CO) |
| 714 | $100.00 | Contractor Tools (CO) |
| 715 | $50.00 | Fire Fighting Tools (CO) |
| 716 | $950.00 | Banding Carts and Tools (CO) |
| 717 | $275.00 | Nylon Slings (CO) |
| 718 | $475.00 | Continuous Slings (CO) |
| 719 | $400.00 | Continuous Slings (CO) |
| 720 | $475.00 | Continuous Slings (CO) |
| 721 | $550.00 | Continuous Slings (CO) |
| 722 | $850.00 | Continuous Slings (CO) |
| 723 | $550.00 | Continuous Slings (CO) |
| 724 | $550.00 | Continuous Slings (CO) |
| 725 | $600.00 | Continuous Slings (CO) |
| 726 | $700.00 | Continuous Slings (CO) |
| 727 | $1,100.00 | Continuous Slings (CO) |
| 728 | $1,700.00 | Pole Setting System Consisting of: (2) 21,200# continuous slings, (2) 10′, 31,000# continuous slings, and (2) 7.5 ton sheet shackles (CO) |
| 729 | $20.00 | Safety Harnesses (CO) |
| 730 | $2,100.00 | Hand Line (CO) |
| 731 | $325.00 | Grunt Bags (CO) |
| 732 | $850.00 | (5) Insulator Lifters (CO) |
| 733 | $1,900.00 | (12) Line Swivels (CO) |
| 734 | $900.00 | (6) Line Swivels (CO) |
| 735 | $1,900.00 | (12) Line Swivels (CO) |
| 736 | $1,500.00 | (10) Line Swivels (CO) |
| 737 | $325.00 | (6) Line Swivels (CO) |
| 738 | $1,000.00 | (7) Line Swivels (CO) |
| 739 | $1,700.00 | (11) Line Swivels (CO) |
| 740 | $1,700.00 | (11) Line Swivels (CO) |
| 741 | $475.00 | BRECKNELL 10,000# Remote Control Crane Scale (CO) |
| 742 | $475.00 | BRECKNELL 10,000# Remote Control Crane Scale (CO) |
| 743 | $500.00 | (6) 1″ to 1.24″ Kellems Grips (CO) |
| 744 | $275.00 | (5) 5/8″ Kellems Grips (CO) |
| 745 | $325.00 | (6) .50″ to .9″ Kellems Grips (CO) |
| 746 | $275.00 | (2) 2″ to 2.49″ and (2) .50″ to .9″ Kellems Grips (CO) |
| 747 | $275.00 | (6) 1-1/8″ Kellems Grips (CO) |
| 748 | $650.00 | (6) 1″ to 1.24″ Kellems Grips (CO) |
| 749 | $650.00 | (6) 1″ to 1.50″ Kellems Grips (CO) |
| 750 | $1,400.00 | (6) 1″ to 1.50″ Kellems Grips (CO) |
| 751 | $650.00 | (6) 1″ to 1.50″ Kellems Grips (CO) |
| 751A | $1,200.00 | (6) 1″ to 1.50″ Kellems Grips (CO) |
| 752 | $110.00 | (6) .75″ to 1.0″ Kellems Grips (CO) |
| 753 | $85.00 | (6) .75″ to 1.10″ Kellems Grips (CO) |
| 754 | $55.00 | (6) .75″ to 1.10″ Kellems Grips (CO) |
| 755 | $425.00 | (5) 1.75″ to 2.5″ Kellems Grips (CO) |
| 756 | $425.00 | (4) 1.75″ to 2.5″ Kellems Grips (CO) |
| 757 | $425.00 | (6) 1.5″ to 1.74″ Kellems Grips (CO) |
| 757A | $230.00 | (2) 1.5″ to 2.10″ Kellems Grips (CO) |
| 758 | $210.00 | (5) .75″ to 1.10″ Kellems Grips (CO) |
| 759 | $210.00 | (5) .75″ to 1.10″ Kellems Grips (CO) |
| 760 | $110.00 | (5) .75″ to .99″ Kellems Grips (CO) |
| 761 | $300.00 | (3) 1″ to 1.50″ Kellems Grips (CO) |
| 762 | $425.00 | (6) 1″ to 1.50″ Kellems Grips (CO) |
| 763 | $325.00 | (6) 1″ to 1.50″ Kellems Grips (CO) |
| 764 | $425.00 | (6) 1″ to 1.50″ Kellems Grips (CO) |
| 765 | $500.00 | (5) 1.25″ to 1.49″ Kellems Grips (CO) |
| 766 | $160.00 | (6) 1.25″ to 1.49″ Kellems Grips (CO) |
| 767 | $210.00 | (6) 1.25″ to 1.50″ Kellems Grips (CO) |
| 767A | $475.00 | (6) 1″ to 1.24″ Kellems Grips (CO) |
| 768 | $425.00 | (6) 1″ to 1.24″ Kellems Grips (CO) |
| 769 | $850.00 | (34) Assorted Kellems Grips (CO) |
| 770 | $1,900.00 | (4) SHERMAN REILLY Hold Down Blocks (CO) |
| 771 | $1,900.00 | (3) 8″, 8 Ton Skookum Blocks (CO) |
| 772 | $2,100.00 | (6) 6″, 8 Ton Skookum Blocks (CO) |
| 773 | $450.00 | (6) 8″, 8 Ton Snatch Blocks (CO) |
| 774 | $425.00 | (6) 6″, 8 Ton Snatch Blocks, (3 Missing Hooks) (CO) |
| 775 | $400.00 | (6) 4-1/2″ Snatch Blocks (CO) |
| 776 | $850.00 | (6) 4-1/2″ Snatch Blocks (CO) |
| 777 | $750.00 | (6) 4-1/2″ Snatch Blocks (CO) |
| 778 | $550.00 | (5) 4-1/2″ and (1) 3″ Snatch Blocks (CO) |
| 779 | $7,250.00 | (12) KLEIN 1.196″ Chicago Grips (CO) |
| 780 | $6,500.00 | (11) KLEIN 1.108″ Chicago Grips (CO) |
| 781 | $4,300.00 | (11) KLEIN 1.108″ Chicago Grips (CO) |
| 782 | $4,100.00 | (12) KLEIN 1.108″ Chicago Grips (CO) |
| 783 | $160.00 | (9) KLEIN .31″ to .62″ Chicago Grips (CO) |
| 784 | $210.00 | (5) KLEIN .31″ to .62″ Chicago Grips (CO) |
| 785 | $550.00 | (5) KLEIN .218″ to .55″ Chicago Grips (CO) |
| 786 | $1,400.00 | (36) KLEIN .53″ to .74″ Chicago Grips (CO) |
| 787 | $2,100.00 | (41) KLEIN .78″ to .88″ Chicago Grips (CO) |
| 788 | $5,250.00 | (9) KLEIN 1.345″ Chicago Grips (CO) |
| 789 | $5,250.00 | (9) KLEIN 1.345″ Chicago Grips (CO) |
| 790 | $5,250.00 | (10) KLEIN 1.345″ Chicago Grips (CO) |
| 791 | $700.00 | (6) KLEIN .927″ Chicago Grips (CO) |
| 792 | $2,100.00 | (5) KLEIN 1.602″ Chicago Grips (CO) |
| 793 | $275.00 | (3) KLEIN 1″ Chicago Grips (CO) |
| 794 | $2,500.00 | Chicago Style and Bulldog Grips (CO) |
| 795 | $1,100.00 | (21) Pocketbook Grips (954 SD Wire) (CO) |
| 796 | $425.00 | (21) .460″ to .469″ Pocketbook Grips (CO) |
| 797 | $750.00 | Assorted Size Pocketbook Grips (CO) |
| 798 | $3,100.00 | (4) COFFING 3 Ton Chain Hoists (CO) |
| 799 | $3,100.00 | (4) COFFING 3 Ton Chain Hoists (CO) |
| 800 | $3,500.00 | (5) COFFING 3 Ton Chain Hoists (CO) |
| 801 | $3,300.00 | (5) COFFING 6 Ton Chain Hoists (CO) |
| 802 | $3,200.00 | (5) COFFING 6 Ton Chain Hoists (CO) |
| 803 | $275.00 | (6) RATCLIFF 6 Ton Chain Hoists (CO) |
| 804 | $2,700.00 | (1) COFFING 6 Ton and (4) COFFING 3 Ton Chain Hoists (CO) |
| 805 | $3,300.00 | (5) COFFING 3 Ton Chain Hoists (CO) |
| 806 | $2,700.00 | (4) COFFING 3 Ton and (1) COFFING 1.5 Ton Chain Hoists (CO) |
| 807 | $2,600.00 | (4) COFFING 1.5 Ton Chain Hoists (CO) |
| 808 | $2,600.00 | (5) COFFING 1.5 Ton Chain Hoists (CO) |
| 809 | $1,900.00 | (5) COFFING 1.5 Ton Chain Hoists (CO) |
| 810 | $1,600.00 | (5) COFFING 1.5 Ton Chain Hoists (CO) |
| 811 | $275.00 | (12) Chain Hoists (Not Working) (CO) |
| 812 | $110.00 | (7) Cable Come-A-Longs (CO) |
| 813 | $120.00 | (7) Cable Come-A-Longs (CO) |
| 814 | $140.00 | (5) Cable Come-A-Longs (CO) |
| 815 | $1,100.00 | (5) Chain Come-A-Longs (CO) |
| 816 | $500.00 | (5) Chain Come-A-Longs (CO) |
| 817 | $550.00 | (5) Strap Come-A-Longs (CO) |
| 818 | $950.00 | (4) AB CHANCE 1 Ton Chain Hoists (CO) |
| 819 | $275.00 | (8) Come-A-Longs and (3) Rope Blocks (CO) |
| 820 | $325.00 | (8) Lifting Chain (CO) |
| 821 | $500.00 | (9) Lifting Chains (CO) |
| 822 | $210.00 | (9) Shackles (CO) |
| 823 | $200.00 | (8) Shackles (CO) |
| 824 | $475.00 | (26) Shackles (CO) |
| 825 | $700.00 | (40) Shackles (CO) |
| 826 | $220.00 | (6) Shackles (CO) |
| 827 | $220.00 | (6) Shackles (CO) |
| 828 | $550.00 | (25) Shackles (CO) |
| 829 | $1,100.00 | (47) Shackles (CO) |
| 830 | $1,200.00 | (67) Shackles (CO) |
| 831 | $550.00 | Chains and Binders (CO) |
| 832 | $325.00 | Chains and Binders (CO) |
| 833 | $425.00 | Chains and Binders (CO) |
| 834 | $300.00 | Chains and Binders (CO) |
| 835 | $210.00 | Ratchet Straps (CO) |
| 836 | $220.00 | Cross Tool Box and Ratchet Straps (CO) |
| 837 | $100.00 | Flare Kits, Safety Flags, and Flashing Lights (CO) |
| 838 | $350.00 | Oversize Load Signs (CO) |
| 839 | $6.00 | Shovels and Post Hole Digger (CO) |
| 840 | $30.00 | Digging Bars (CO) |
| 841 | $21.00 | Rakes (CO) |
| 842 | $16.00 | Shovels (CO) |
| 843 | $325.00 | Cant Hooks (CO) |
| 844 | $18.00 | Gas Cans (CO) |
| 845 | $60.00 | Jumper Cables (CO) |
| 846 | $30.00 | Trailer Hitches (CO) |
| 847 | $5.00 | Fire Extinguisher (CO) |
| 848 | $80.00 | Power Cord Reel (CO) |
| 849 | $130.00 | ARS Helicopter Bosun Seat (CO) |
| 850 | $0.50 | Helicopter Work Platform (CO) |
| 851 | $11,250.00 | CALDWELL 32S-20-15.5/27, 20 Ton Extendable Spreader Beam (CO) |
| 851A | $110.00 | Forklift Reel Carrier (CO) |
| 851B | $100.00 | 4-Part Wire Rope Spreader, with swivel (CO) |
| 852 | $210.00 | Lifting Chains and 2-Part Chain Spreader (CO) |
| 853 | $160.00 | 2-Part Wire Rope Spreaders and Chains (CO) |
| 854 | $80.00 | Wire Rope Slings (CO) |
| 855 | $550.00 | (2) 4-Part Wire Rope Spreaders and Lifting Chains (CO) |
| 856 | $65.00 | Wire Rope Slings (CO) |
| 857 | $550.00 | Wire Rope Slings (CO) |
| 858 | $425.00 | Wire Rope Slings (CO) |
| 859 | $190.00 | Wire Rope Slings (CO) |
| 860 | $45.00 | Wire Rope Slings (CO) |
| 861 | $30.00 | Wire Rope Slings (CO) |
| 862 | $110.00 | Wire Rope Slings (CO) |
| 863 | $10.00 | (5) Lifting Grapples Wire Rope Slings (CO) |
| 864 | $700.00 | Energized Wire Supports (CO) |
| 865 | $4,200.00 | (17) HASTINGS Fiberglass Hot Arms (CO) |
| 866 | $3,200.00 | (12) AB CHANCE Fiberglass Hot Arms (CO) |
| 867 | $600.00 | Energized Wire Supports and Insulator Holders (CO) |
| 868 | $70.00 | (4) 20′ Fiberglass Hanging Ladders (CO) |
| 869 | $50.00 | (1) 16′, (1) 14′, and (1) 12′ Fiberglass Hanging Ladders (CO) |
| 870 | $45.00 | (1) 16′ and (2) 12′ Fiberglass Hanging Ladders and Ladder Sections (CO) |
| 871 | $425.00 | Cloth Signs, Sign Stands, Stop and Slow Paddles, Safety Cones, and Fence (CO) |
| 872 | $130.00 | 60″ Collapsible Reel, with guy wire (2-1/2″ Shaft) (CO) |
| 873 | $1,100.00 | (3) Collapsible Capstan Reels, (1) with rope (CO) |
| 874 | $50.00 | Reel stand, with manual brake, 42″ width, 88″ diameter max reel size with 2-1/4″ shaft (CO) |
| 875 | $850.00 | 60″ x 48″ Bolt Together Reel, 5-1/4″ shaft (CO) |
| 876 | $11.00 | Rope (CO) |
| 877 | $425.00 | Skid Mounted 2″ Belt Drive Pump, Honda 8HP gas, with 200 gallon poly water tank and manual hose reel (CO) |
| 878 | $30.00 | 130 Gallon Poly Tank (CO) |
| 879 | $55.00 | Air Hose (CO) |
| 880 | $55.00 | Air Hose (CO) |
| 881 | $21.00 | Hydraulic Hose (CO) |
| 882 | $45.00 | (3) Hose Reels (CO) |
| 883 | $0.01 | DURA GUARD Pulse Start 400 Lights (CO) |
| 884 | $160.00 | CADWELD Molds (CO) |
| 885 | $110.00 | Pole Shovels and Digging Bars (CO) |
| 886 | $500.00 | (4) Collapsible Wire Baskets (CO) |
| 887 | $12.00 | 90″ x 50″ Reel, with 5″ shaft size (CO) |
| 888 | $11.00 | 90″ x 50″ Reel, with 5″ shaft size (CO) |
| 888A | $300.00 | (3 Reels) Approximately 17,000′ of 3/8″ hardline (CO) |
| 890 | $160.00 | Ball Hook (CO) |
| 891 | $210.00 | (2) Single Sheave Hook Blocks (CO) |
| 892 | $16.00 | (2) Weighted Hooks (CO) |
| 893 | $425.00 | (4) 20′ x 4′, (4) 16′ x 4′, and (8) 12′ x 4′ Crane Mats, 6″ x 6″ construction (CO) |
| 894 | $180.00 | 64″ Fork Attachment (JD 644H) (CO) |
| 895 | $275.00 | 40″ Hydraulic Clamping Forks, 4,000# capacity (Lull 10K) (CO) |
| 896 | $130.00 | 60″ Hanging Forks (CO) |
| 897 | $1.25 | 57″ and 48″ Hanging Forks (no bars) and 48″ Forklift Forks (CO) |
| 898 | $55.00 | (2) 50 Gallon Step Fuel Tanks, with electric pumps (CO) |
| 899 | $55.00 | (2) 50 Gallon Step Fuel Tanks, (1) with electric pump (CO) |
| 900 | $30.00 | (2) 50 Gallon Step Fuel Tanks (1) electric and (1) manual pump (CO) |
| 901 | $50.00 | (2) 50 Gallon Fuel Tanks, with electric pumps (CO) |
| 902 | $21.00 | Aluminum Pickup Tool Box (CO) |
| 903 | $13.00 | (2) Cross and (1) Side Tool Boxes (CO) |
| 904 | $11.00 | (2) Side Boxes (CO) |
| 905 | $1.00 | (3) Hydraulic Tanks, (1) Fuel Tank, and Hydraulic Cooler (CO) |
| 906 | $11.00 | Reel Roller and Reel Stand (CO) |
| 907 | $110.00 | 72″ x 42″ Reel, with 3/4″ rope (CO) |
| 908 | $35.00 | 90″ x 48″ Reel, 5″ shaft size (CO) |
| 909 | $50.00 | 65″ x 40″ Reel, 2-3/4″ shaft size, with 5/8″ rope (CO) |
| 911 | $45.00 | 1-1/4″ Flexible Conduit (CO) |
| 912 | $700.00 | BEDROCK 8′ x 7′ Steel Flatbed, with fuel tank with electric pump, and tool box (CO) |
| 913 | $0.35 | Aluminum Headache Rack and Step Tank (CO) |
| 914 | $5.00 | Galvanized Pipe (CO) |
| 915 | $400.00 | 30″ Steel Casing (CO) |
| 916 | $230.00 | (31) 49′ to 85′ Wood Utility Poles (CO) |
| 916A | $1,200.00 | 20′ Skid Mounted Overseas Storage Container (CO) |
| 917 | $1,200.00 | 20′ Skid Mounted Overseas Storage Container (CO) |
| 918 | $2,000.00 | 20′ Overseas Storage Container (CO) |
| 919 | $1,500.00 | 20′ Overseas Storage Container, with wood shelves (CO) |
| 920 | $850.00 | 7’6″ Overseas Storage Container, with metal shelves (CO) |
| 921 | $1,100.00 | 7’6″ Overseas Storage Container (CO) |
| 922 | $3,200.00 | 2017 8′ x 20′ Storage Container (Sales Tax) (Sales Tax) (WY) |
| 923 | $3,000.00 | 2017 8′ x 20′ Storage Container (Sales Tax) (Sales Tax) (WY) |
| 924 | $45.00 | FRUEHAUF 8′ x 30′ Storage Container (Sales Tax) (Sales Tax) (WY) |
| 925 | $2,400.00 | 2002 AM-TANK 1,300 Gallon Fuel Tank, with PIUSI 110 volt electric pump and enclosure (Sales Tax) (Sales Tax) (WY) |
| 926 | $2.25 | (2) Tanks (Sales Tax) (Sales Tax) (WY) |
| 927 | $40.00 | 250 Gallon Poly Tank (Sales Tax) (WY) |
| 928 | $425.00 | Forklift Dump Hopper (Sales Tax) (WY) |
| 929 | $300.00 | Forklift Dump Hopper (Sales Tax) (WY) |
| 930 | $220.00 | Forklift Dump Hopper (Sales Tax) (WY) |
| 931 | $65.00 | Combination Fuel Tank/Tool Box, with electric pump (Sales Tax) (WY) |
| 932 | $55.00 | Combination Fuel Tank/Tool Box, with electric pump (Sales Tax) (WY) |
| 933 | $95.00 | Pickup Fuel Tank, with electric pump (Sales Tax) (WY) |
| 934 | $45.00 | Pickup Fuel Tank, with electric pump (Sales Tax) (WY) |
| 935 | $90.00 | Pickup Fuel Tank, with electric pump (Sales Tax) (WY) |
| 936 | $45.00 | Fuel Tank, with electric pump and (3) tool boxes (Sales Tax) (WY) |
| 937 | $170.00 | WEATHER GUARD Cross Tool Box (Sales Tax) (WY) |
| 938 | $70.00 | (6) Tool Boxes (3 Pallets) (Sales Tax) (WY) |
| 939 | $50.00 | (2) 36″ x 8′ Plastic Mats (Sales Tax) (WY) |
| 940 | $600.00 | Behind Cab Fuel Tank/Tool Box (Sales Tax) (WY) |
| 941 | $0.04 | 8′ Pickup Bed (Ram Laramie) (Sales Tax) (WY) |
| 942 | $130.00 | 8′ Pickup Bid (Chevrolet Silverado) (Sales Tax) (WY) |
| 943 | $0.02 | Material Rack (Sales Tax) (WY) |
| 944 | $210.00 | 8’6″ Flatbed Body, with gooseneck hitch (Sales Tax) (WY) |
| 945 | $23.00 | 10′ Flatbed Body, with gooseneck hitch and service boom (Sales Tax) (WY) |
| 946 | $4.75 | WAIN ROY 28″ Digging Bucket (Sales Tax) (WY) |
| 947 | $14.00 | 24″ Digging Bucket (Sales Tax) (WY) |
| 948 | $2.50 | 16″ Digging Bucket (Sales Tax) (WY) |
| 949 | $25.00 | GEITH 36″ Digging Bucket (Sales Tax) (WY) |
| 950 | $13.00 | 24″ Digging Bucket (Sales Tax) (WY) |
| 951 | $22.00 | HENSLEY 16″ V-Rock Bucket (Sales Tax) (WY) |
| 952 | $70.00 | CWS 28″ V-Rock Bucket (Sales Tax) (WY) |
| 953 | $55.00 | Hydraulic Demolition Hammer (Sales Tax) (WY) |
| 954 | $55.00 | (2) Pipe Stands (Sales Tax) (WY) |
| 955 | $50.00 | (3) Aluminum Pipe Stands (Sales Tax) (WY) |
| 956 | $500.00 | (4) Log/Pole Bunks (Sales Tax) (WY) |
| 957 | $24.00 | (3) Reel Stands (Sales Tax) (WY) |
| 958 | $22.00 | (3) Reel Stands and Parts (Sales Tax) (WY) |
| 959 | $110.00 | (2) Reels (Sales Tax) (WY) |
| 960 | $1,800.00 | TANDEMOC 10 Ton Spreader Beam (Sales Tax) (WY) |
| 961 | $55.00 | (4) 385/65R22.5 Tires (Sales Tax) (WY) |
| 962 | $0.02 | (2) 365/80R20 Tires, with rims (Sales Tax) (WY) |
| 963 | $2.75 | (1) 445/65R19.5 Tire and (1) 425/65R22.5 Tire, with rim (Sales Tax) (WY) |
| 964 | $55.00 | (5) 10.00-20 Tires, with rims (Sales Tax) (WY) |
| 965 | $80.00 | (5) Truck Tires (Sales Tax) (WY) |
| 966 | $2.00 | (3) 315/80R22.5 Tires (Sales Tax) (WY) |
| 967 | $0.00 | (4) 275/70R22.5 Tires (Sales Tax) (WY) |
| 968 | $90.00 | (3) 11R24.5 Tires (Sales Tax) (WY) |
| 969 | $0.00 | (4) 225/70R19.5 Tires, with rims (Sales Tax) (WY) |
| 970 | $1.00 | (2) 295/75R22.5 Tires and (2) 11R22.5 Tires (Sales Tax) (WY) |
| 971 | $5.00 | (1) 15-19.5 Tire (Sales Tax) (WY) |
| 972 | $0.01 | (4) Tires (Sales Tax) (WY) |
| 973 | $0.00 | (6) Tires (Sales Tax) (WY) |
| 974 | $0.00 | (2) 7.50-15 Tires (Pneumatic Roller) (Sales Tax) (WY) |
| 975 | $4.25 | (4) Tires and Assorted Rims (Sales Tax) (WY) |
| 976 | $275.00 | (2 Pallets) Tire Chains and Parts (Sales Tax) (WY) |
| 977 | $45.00 | Tire Chains (Sales Tax) (WY) |
| 978 | $25.00 | Tire Chains (Sales Tax) (WY) |
| 979 | $25.00 | (2 Pallets) Tire Chains (Sales Tax) (WY) |
| 980 | $200.00 | (2 Pallets) Tire Chains (Sales Tax) (WY) |
| 981 | $40.00 | DETROIT 6V-53 Diesel Engine (Running Take-Out) (Sales Tax) (WY) |
| 982 | $850.00 | JOHN DEERE 4045T Diesel Engine (Running Take-Out) (Sales Tax) (WY) |
| 983 | $600.00 | CUMMINS 5.9L Diesel Engine (Core) (Sales Tax) (WY) |
| 984 | $12.00 | Radiators (Sales Tax) (WY) |
| 985 | $5.50 | DETROIT 4-71 Diesel Engine (Core) (Sales Tax) (WY) |
| 986 | $5.50 | DETROIT 6V-53 Diesel Engine (Core) (Sales Tax) (WY) |
| 987 | $1.00 | SPICER Transmission (Sales Tax) (WY) |
| 988 | $325.00 | INTERNATIONAL DT-466 Diesel Engine (Core) (Sales Tax) (WY) |
| 989 | $9.50 | DETROIT 4-71 Diesel Engine (Core) (Sales Tax) (WY) |
| 990 | $15.00 | JOHN DEERE 3.0L Diesel Engine (Core) (Sales Tax) (WY) |
| 991 | $11.00 | 5th Wheel Dolly (Sales Tax) (WY) |
| 992 | $325.00 | Ratchet Binders and Chains (Sales Tax) (WY) |
| 993 | $240.00 | Truck Hitches (Sales Tax) (WY) |
| 994 | $70.00 | 4″ Nylon Straps and Guards (Sales Tax) (WY) |
| 995 | $100.00 | Hose Reels (Sales Tax) (WY) |
| 996 | $75.00 | Battery Charger and Jumper Cables (Sales Tax) (WY) |
| 997 | $75.00 | Landscape Tools (Sales Tax) (WY) |
| 998 | $160.00 | Torch Accessories (Sales Tax) (WY) |
| 999 | $70.00 | (5) Bull Ropes (Sales Tax) (WY) |
| 1000 | $6.00 | Gas Cans and Pump (Sales Tax) (WY) |
| 1001 | $21.00 | KELCO Sandblast Pot (Sales Tax) (WY) |
| 1002 | $25.00 | (6) Air Hoses (Sales Tax) (WY) |
| 1003 | $6.50 | (5) Air Hoses (Sales Tax) (WY) |
| 1004 | $4.25 | Air Hose (Sales Tax) (WY) |
| 1005 | $65.00 | Tarps (Sales Tax) (WY) |
| 1006 | $16.00 | 3″ Diaphragm Pump, with suction hose (Sales Tax) (WY) |
| 1007 | $90.00 | 2″ Centrifugal Pump, with suction and discharge hose (Sales Tax) (WY) |
| 1008 | $0.02 | Assorted Puller Parts (Sales Tax) (WY) |
| 1009 | $7.50 | (3 Pallets) Safety Fence (Sales Tax) (WY) |
| 1010 | $5.50 | (2 Pallets) Highway and Safety Cones (Sales Tax) (WY) |
| 1011 | $70.00 | (5 Pallets) Signs and Sign Stands (Sales Tax) (WY) |
| 1012 | $130.00 | Contractors Tools (Sales Tax) (WY) |
| 1013 | $5.50 | Bucket Teeth (Sales Tax) (WY) |
| 1014 | $0.01 | Auger Teeth and Drill Tips (Sales Tax) (WY) |
| 1015 | $5.50 | Auger Dirt Teeth (Sales Tax) (WY) |
| 1016 | $7.50 | Trencher Teeth (Sales Tax) (WY) |
| 1017 | $220.00 | Carbide Bulle Teeth (Sales Tax) (WY) |
| 1018 | $23.00 | (2 Pallets) Bucket Teeth (Sales Tax) (WY) |
| 1019 | $65.00 | (1 Spool) 5/8″ Samson Rope (Sales Tax) (WY) |
| 1020 | $55.00 | (1 Reel) 3/4″ Braided Rope (Sales Tax) (WY) |
| 1021 | $130.00 | Tow Rope and Cables (Sales Tax) (WY) |
| 1022 | $80.00 | (1 Pallet) Power Tools (Sales Tax) (WY) |
| 1023 | $35.00 | Ground Cable (Sales Tax) (WY) |
| 1024 | $0.01 | Assorted Parts (Texoma Diggers) (Sales Tax) (WY) |
| 1025 | $475.00 | JET Drill Press and PORTER CABLE Air Compressor (Sales Tax) (WY) |
| 1026 | $15.00 | Fire Extinguishers (Sales Tax) (WY) |
| 1027 | $120.00 | 2 Ton Shop Hoist (Sales Tax) (WY) |
| 1028 | $180.00 | (2) Heavy Duty Floor Jacks (Sales Tax) (WY) |
| 1028A | $45.00 | STOW Walk Behind Power Trowel (Sales Tax) (WY) |
| 1028B | $170.00 | (3) Transits, with tripods and grade poles (Sales Tax) (WY) |
| 1028C | $90.00 | SOKKISHA REDIA Electronic Distance Meter (Sales Tax) (WY) |
| 1028D | $65.00 | Conduit Bender, with gas power unit (Sales Tax) (WY) |
| 1029 | $120.00 | SIMPSON Portable Gas Powered Pressure Washer (Sales Tax) (WY) |
| 1030 | $12.00 | Heavy Duty Puller (Sales Tax) (WY) |
| 1031 | $13.00 | Wood Drill and Bits (Sales Tax) (WY) |
| 1032 | $2.25 | Climbing Harnesses and Tools (Sales Tax) (WY) |
| 1033 | $7.50 | Placards and Safety Lights (Sales Tax) (WY) |
| 1034 | $65.00 | 10 Ton Porta Power Set (Sales Tax) (WY) |
| 1035 | $110.00 | AIR-ARC Torch (Sales Tax) (WY) |
| 1036 | $70.00 | 3/4″ Torque Wrench (Sales Tax) (WY) |
| 1037 | $19.00 | Pneumatic Porta Power Pump (Sales Tax) (WY) |
| 1038 | $21.00 | Puller Sets and Label Maker (Sales Tax) (WY) |
| 1039 | $35.00 | Taps and Dies, and Rivet Kit (Sales Tax) (WY) |
| 1040 | $0.01 | GE 3-Phase Starter Box (NEMA Size 2) (Sales Tax) (WY) |
| 1041 | $110.00 | (2) Power Invertors (Sales Tax) (WY) |
| 1042 | $11.00 | (2) 24 Volt Battery Maintainers (Sales Tax) (WY) |
| 1043 | $0.45 | 2-Way Radios (Sales Tax) (WY) |
| 1044 | $80.00 | Radios and Accessories (Sales Tax) (WY) |
| 1045 | $0.25 | (5 Pallets) (90) UNUSED USS POLY-SET Structure Backfill Foam, with catalyst hardener (AZ) |
| 1046 | $13.00 | 275 Gallon Poly Water Tote (AZ) |
| 1047 | $425.00 | (2) 5′ x 8′ x 3/4″ Steel Road Plate (AZ) |
| 1048 | $400.00 | (14) 3′ x 8′ x 1/2″ Poly Stabilization Mats (AZ) |
| 1049 | $300.00 | Forklift Dump Hopper (AZ) |
| 1050 | $350.00 | Forklift Dump Hopper (AZ) |
| 1051 | $300.00 | Forklift Dump Hopper (AZ) |
| 1052 | $300.00 | Forklift Dump Hopper (AZ) |
| 1053 | $25.00 | Chains and Binders (DAY 3) (AZ) |
| 1054 | $550.00 | MILWAUKEE Magnetic Drill (No Battery) (DAY 3) (AZ) |