1440 Cowpath Rd. Hatfield, Pa 19440 
215 361-9099
Auction Results
Wilkie Contracting Co.
Wednesday, August 13, 2025 – 9:00AM
Claysville, Pennsylvania
(Washington, PA Area)
ABSOLUTE AUCTION
NOTICE: Following (69) successful years in the Pipeline Construction industry, second-generation owner of Wilkie Contracting Co., Mr. Don Wilkerson, has made the difficult decision to exit the industry and move into retirement. All equipment is owned by Wilkie Contracting and will sell to the highest bidder at Absolute Auction without minimums or reserves.
PA Auction License No: AY000281
| Lot # | Price | Description |
| 1 | $4,500.00 | 2014 POLARIS Model 800 EFI Ranger, 6×6 ATV, VIN# 4XAHR76A0E2550660, powered by Polaris 2 cylinder gas engine and hi-lo transmission, equipped with roll bar with roof and windshield, 4′ electric dump bed, bumper winch, behind cab storage box, tow package, 25×8-12 front and 25×11-12 rear tires. In good condition with good tires (1 fair to poor) (Odometer Reads 3,237 Miles) (Meter Reads 900 Hours) (Title Delay 1 to 3 Months) |
| 2 | $4,200.00 | 2013 POLARIS Model 800 EFI Ranger, 6×6 ATV, VIN# 4XAHR76A2D4730919, powered by Polaris 2 cylinder gas engine and hi-lo transmission, equipped with roll bar with roof and windshield, 4′ electric dump bed, bumper winch, behind cab storage box, tow package, 26×9.00R12 front and 26×11.00R12 rear tires. In good condition with good tires. (Odometer Reads 3,819 Miles) (Meter Reads 1,089 Hours) (Title Delay 1 to 3 Months) |
| 3 | $3,750.00 | 2008 POLARIS Model 700 Ranger, 6×6 ATV, VIN# 4XARF68A584409404, powered by 2 cylinder gas engine and hi-lo transmission, equipped with roll bar with roof and windshield, 4′ electric dump bed, bumper winch, 25x10x12 front and 26×11.00×12 rear tires. In good condition with good tires. (Odometer Reads 5,164 Miles) (Meter Reads 1,645 Hours) (Generator in Photo NOT INCLUDED) (Title Delay 1 to 3 Months) |
| 4 | $1,200.00 | 2010 HYUNDAI Sonata 4-Door Sedan, VIN# 5NPET4AC9AH577501, powered by 4 cylinder gas engine and automatic transmission, equipped with power windows, locks, and mirrors, cruise control, air conditioning, and 215/60R16 tires. In good condition with good tires. (Odometer Reads 175,972 Miles) (Rear Driver Side Damage; Both Side Mirrors Broken) (PA Inspection thru 3/26) |
| 5 | $24,250.00 | 2015 GMC Model 2500HD Sierra, 4×4 Pickup Truck, VIN# 1GT02XEG9FZ545451, powered by Vortec 6.0L gas engine and automatic transmission, equipped with 8′ bed with spray on liner, aluminum side rails and rear window guard, tow package, running boards, brush guard, power locks, cruise control, air conditioning, and 245/75R17 tires. In good condition with good tires. (Odometer Reads 62,552 Miles) (Purchased New) (PA Inspection thru 3/26) |
| 6 | $13,500.00 | 2013 FORD Model F-350XL Super Duty, 4×4 Pickup Truck, VIN# 1FTRF3B6XDEA98729, powered by 6.2L gas engine and automatic transmission, equipped with 8′ bed with liner, tow package, rear window guard, running boards, brush guard, cruise control, air conditioning, and 265/70R17 tires. In fair to good condition with good tires. (Odometer Reads 124,366 Miles) (Minor Damage Driver Side Bed) (PA Inspection thru 3/26) |
| 7 | $41,000.00 | 2018 CHEVROLET Model 3500HD Silverado 4×4 Crew Cab Utility Truck, VIN# 1GB4KYCY5JF127535, powered by Duramax 6.6L diesel engine and Allison automatic transmission, equipped with Knapheide 9′ open utility body with spray-on liner, 100 gallon fuel tank with electric pump, material rack tow package, dual fuel tanks, dual rear wheels, running boards, power windows, locks, and mirrors, cruise control, air conditioning, and 235/80R17 tires. In good condition with good tires. (Odometer Reads 62,717 Miles) (Purchased New) (PA Inspection thru 3/26) |
| 8 | $30,000.00 | 2018 CHEVROLET Model 3500HD, 4×4 Utility Truck, VIN# 1GB3KYCY6JF154173, powered by Duramax 6.6L diesel engine and Allison automatic transmission, equipped with Knapheide 9′ open utility body with spray-on liner, Tommy Gate electric lift gate, material rack, tow package, dual fuel tanks, dual rear wheels, running boards, power windows, locks, and mirrors, cruise control, air conditioning, and 235/80R17 tires. In good condition with good tires. (Odometer Reads 89,507 Miles) (Purchased New) (PA Inspection thru 4/26) |
| 9 | $22,000.00 | 2015 CHEVROLET Model 3500HD, 4×4 Crew Cab Utility Truck, VIN# 1GB4KYC8XFF174650, powered by Duramax 6.6L diesel engine and Allison automatic transmission, equipped with Reading 9′ open utility body with spray-on liner, 100 gallon fuel tank with electric pump, material rack, tow package, dual fuel tanks, dual rear wheels, power windows, locks, and mirrors, cruise control, air conditioning, and 235/80R17 tires. In good condition with good tires. (Odometer Reads 103,836 Miles) (Purchased New) (PA Inspection thru 4/26) |
| 10 | $13,500.00 | 2013 GMC Model 3500HD, 4×4 Utility Truck, VIN# 1GD322CG8DF114032, powered by Vortec 6.0L gas engine and automatic transmission, equipped with Reading 9′ walk-in utility body, tow package, dual fuel tanks, dual rear wheels, aluminum brush guard, cruise control, air conditioning, and 235/80R17 tires. In good condition with good tires. (Odometer Reads 115,452 Miles) (Purchased New) (PA Inspection thru 3/26) |
| 11 | $14,500.00 | 2008 CHEVROLET Model 3500HD, 4×4 Crew Cab Utility Truck, VIN# 1GBJK33638F183682, powered by Duramax 6.6L diesel engine and Allison automatic transmission, equipped with Reading 8′ open utility body with spray on liner, 100 gallon fuel tank with electric pump, material rack, tow package, dual rear wheels, power locks, cruise control, air conditioning, and 235/80R17 tires. In good condition with good tires. (Odometer Reads 136,106 Miles) (Purchased New) (PA Inspection thru 5/26) |
| 12 | $7,000.00 | 2008 CHEVROLET Model 3500HD, 4×4 Utility Truck, VIN# 1GBJK34618E121878, powered by Duramax 6.6L diesel engine and Allison automatic transmission, equipped with Knapheide 9′ open utility body with electric lift gate, material rack, dual fuel tanks, dual rear wheels, tow package, cruise control, air conditioning, and 235/80R17 tires. In good condition with good tires. (Odometer Reads 212,556 Miles) (Purchased New) (PA Inspection thru 11/25) |
| 13 | $4,000.00 | 2001 FORD Model F-350XL Super Duty, 4×4 Utility Truck, VIN# 1FDWF37F51EC09142, powered by Power Stroke 7.3L diesel engine and automatic transmission, equipped with Knapheide 9′ walk-in utility body, tow package, dual rear wheels, running boards, cruise control, air conditioning, and 235/85R16 tires. In good condition with good tires. (Odometer Reads 205,979 Miles) (PA Inspection thru 2/26) |
| 14 | $6,500.00 | 1993 FORD Model F-350XL, 4×4 Utility/Dump Truck, VIN# 1FDKF38G1PNB29416, powered by V-8 gas engine and automatic transmission, equipped with Reading 9′ open utility body, steel dump body insert, tow package, dual rear wheels, running boards, and 235/85R16 tires. In good condition with good tires. (Odometer Reads 228,611 Miles) (PA Inspection thru 4/26) |
| 15 | $9,250.00 | 2000 FORD Model F-350XL Super Duty, 4×4 Flatbed Truck, VIN# 3FDWF37S3YMA12391, powered by Triton V-10 gas engine and 5 speed transmission, equipped with 9′ steel flatbed, underbed storage box, running boards, tow package, dual rear wheels, air conditioning, and 245/75R16 tires. In good condition with good tires. (Odometer Reads 142,359 Miles) (PA Inspection thru 3/26) |
| 16 | $54,000.00 | 2013 CHEVROLET Model 3500HD, 4×4 Quad Cab Welder Truck, VIN# 1GC5KZCG3DZ204483, powered by Vortec 6.0L gas engine and automatic transmission, equipped with Martin 9′ aluminum welder body, Lincoln SAE300 diesel powered welder/generator (2,451 hours) with remote control, oxygen acetylene reels, welding lead reels, torches, beveling machine, vise, tow package, dual rear wheels, aluminum brush guard, power locks, cruise control, air conditioning, and 235/80R17 tires. In good condition with good tires. (Odometer Reads 58,212 Miles) (Purchased New) (PA Inspection thru 3/26) |
| 17 | $8,500.00 | 2005 FORD Model F-450XL Super Duty, 4×4 Compressor Truck, VIN# 1FDXF47P15EC92125, powered by Power Stroke 7.3L diesel engine and automatic transmission, equipped with RC 11′ diamond plate aluminum utility body, Airman air compressor, powered by Isuzu diesel engine (2,459 hours), self winding air hose reels, dual rear wheels, tow package, cruise control, air conditioning, and 225/70R19.5 tires. In good condition with good tires. (Odometer Reads 122,516 Miles) (PA Inspection thru 4/26) |
| 18 | $6,500.00 | 1992 FORD Model F-350, 4×4 Compressor Truck, VIN# 1FDKF38M2NNB11946, powered by Int’l 7.3L diesel engine and automatic transmission, equipped with RC 11′ diamond plate aluminum utility body with side boxes, 1997 Ingersoll Rand P185WJDU air compressor, s/n 273903UCH296, powered by JD diesel engine (0,896 Hours), Ramsey front bumper winch, behind cab material basket, tow package, dual rear wheels, and 235/85R16 tires. In good condition with good tires. (Odometer Reads 126,117 Miles) (PA Inspection thru 3/26) |
| 19 | $5,250.00 | 2006 CHEVROLET Single Axle Van Body Truck, VIN# 1GBHG31U961123630, powered by 6.0L gas engine and automatic transmission, equipped with Supreme 12′ aluminum van body with Tommy Gate electric lift gate, rollup rear door, dual rear wheels, air conditioning, and 225/75R16 tires. In good condition with good tires. (Odometer Reads 54,472 Miles) (PA Inspection thru 4/26) |
| 20 | $6,250.00 | 1995 INTERNATIONAL Model 4800, 4×4 Van Body Truck, VIN# 1HTSEAAN2SH647937, powered by Int’l DT466 diesel engine and automatic transmission, equipped with Morgan 14’6″ aluminum van body with fiberglass roof, 15KW generator, powered by Yanmar diesel engine, with 95 gallon fuel tank (732 hours), bottle cart, heat, electric, rollup rear door, front brush guard, air brakes, 28,000# GVWR, and 11R22.5 tires. In good condition with good tires. (Odometer Reads 055,394 Miles) (PA Inspection Expired) (NEW Injection Pump) |
| 21 | $2,500.00 | 1995 INTERNATIONAL Model 4700 Compressor Truck, VIN# 1HTSCAAL5SH636287, powered by Int’l DT466 diesel engine and 5 speed transmission with 2 speed rear, equipped with Stahl 9′ walk-in utility body, Vanair model 125UDEC air compressor, s/n 30-55964, tow package, heated mirrors, and 9R22.5 tires. In good condition with good tires. (Odometer Reads 082,629 Miles) (PA Inspection thru 4/26) |
| 22 | $3,000.00 | 1981 INTERNATIONAL Model 1724 Single Axle Welder Truck, VIN# 1HTAA17B5BHB27089, powered by V-8 gas engine and 4 speed transmission with 2 speed rear, equipped with 10’6″ welder body, Lincoln SA200, 200 amp gas powered welder/generator, s/n A964163, vise, 10R22.5 front and 8.25×20 rear tires. In fair to good condition with good tires. (Odometer Reads 068,192 Miles) (Purchased New) (PA Inspection thru 5/26) |
| 23 | $3,750.00 | 1983 FORD Model 8000 Single Axle Winch Truck, VIN# 1FDXR80UXDVA37793, powered by Cat 3208, 210HP diesel engine and 5 speed transmission with 2 speed rear, equipped with Leland 14’10” steel bed with fold away A-frame and Tulsa mechanical winch, rolling tail, spring suspension, air brakes, 32,000# GVWR, and 11R22.5 tires. In good condition with good tires. (Odometer Reads 77,544 Miles) (PA Inspection thru 5/26) |
| 24 | $12,000.00 | 2002 VOLVO Model VNM64 Tandem Axle Dump Truck, VIN# 4V4MC9GF42N336378, powered by Volvo VED12-345, 345HP diesel engine and Meritor 10 speed transmission, equipped with Godwin 13′ steel dump body with 2-way gate with chute and electric tarp, engine brake, 38,000# rears, 12,000# front axle, 50,000# GVWR, air ride suspension, tow package with air, air conditioning, 295/75R22.5 front and 275/80R22.5 rear tires. In good condition with good tires. (Odometer Reads 372,395 Miles) (PA Inspection thru 4/26) |
| 25 | $24,000.00 | 1998 FREIGHTLINER Tandem Axle Dump Truck, VIN# 1FUYDDYB1WL902306, powered by Cummins N14 Plus diesel engine and Rockwell 10 speed transmission, equipped with Godwin 16′ steel dump body with 2-way gate with chute and electric tarp, 3-stage engine brake, 40,000# rears, 13,220# front axle, 53,220# GVWR, aluminum wheels, tow package with air, power heated mirrors, cruise control, air conditioning, 11R22.5 front and 295/75R22.5 rear tires. In good condition with good tires. (Odometer Reads 782,705 Miles) (PA Inspection thru 4/26) |
| 26 | $17,000.00 | 1990 INTERNATIONAL Model 8200 Tandem Axle Dump Truck, VIN# 1HSHGG2R0LH298064, powered by Cummins NTC-315, 315HP diesel engine and Eaton Fuller 9 speed transmission, equipped with 13′ steel dump body with aluminum tailgate and tarp, 3-stage engine brake, 40,000# rears, 12,000# front axle, 52,000# GVWR, aluminum front wheels, spring/walking beam suspension, tow package with air, air conditioning, 11R22.5 front and 285/75R22.5 rear tires. In good condition with good tires. (Odometer Reads 060,801 Miles) (PA Inspection thru 4/26) |
| 27 | $12,000.00 | 1988 FREIGHTLINER Tandem Axle Truck Tractor, VIN# 1FUY2XYB2JH332352, powered by Cat 3406B, 425HP diesel engine, s/n 4MG21703, and Fuller 8LL, 10 speed transmission, equipped with wetline, stationary 5th wheel, spring/beam suspension, double frame, 2-stage engine brake, aluminum headache rack, aluminum front wheels, heated mirrors, power passenger mirror, air conditioning, and 11R24.5 tires. In good condition with good tires. (Odometer Reads 0,241,866 Miles) (VIN# From Frame Stamp) (New Rear Brakes and Drums) (PA Inspection thru 4/26) |
| 28 | $24,500.00 | 1997 TRAIL KING 40 Ton Tandem Axle Lowboy Trailer, VIN# 1TKJ04322VM127657, equipped with non ground bearing detachable gooseneck, 22′ level deck, 6′ open over axles, 21″ beavertail, 8’6″ width, air ride suspension, aluminum wheels, chain dogs, outriggers, and 255/70R22.5 tires. In good condition with good tires. (Purchased New) |
| 29 | $19,000.00 | 2006 FONTAINE Model FTW-5-8045SL, 45′ Tandem Axle Flatbed Trailer, VIN# 13N1452C361533617, equipped with 96″ width, spring suspension, 80,000# GVWR, ratchet straps, sliding tandems, aluminum wheels, and 295/75R22.5 tires. In good condition with good tires. |
| 30 | $4,000.00 | 1982 FRUEHAUF 40′ Tandem Axle Flatbed Trailer, VIN# 1H4P04024BF045531, equipped with 96″ width, spring suspension, ratchet straps, aluminum wheels, and 11R22.5 tires. In good condition with good tires. (No VIN# Plate) |
| 31 | $13,000.00 | 2008 PITTS Model TA20, 20 Ton Tandem Axle Tag-A-Long Trailer, VIN# 5JYTA20218P080842, equipped with 19′ level deck, 5′ beavertail, 8′ electric over hydraulic ramps, 102″ width, aluminum wheels, air brakes, spring suspension, 47,900# GVWR, and 215/75R17.5 tires. In good condition with good tires. (Purchased New) (#397) |
| 32 | $6,500.00 | 1990 TRAIL KING Model TK40LP-2400, 20 Ton Tandem Axle Tag-A-Long Trailer, VIN# 1TKC02420LM067420, equipped with 19′ level deck, 5′ beavertail, 5′ ramps, 102″ width, air brakes, spring suspension, 47,700# GVWR, and 215/75R17.5 tires. In good condition with good tires. (Purchased New) (#256) |
| 33 | $3,500.00 | 1978 GENERAL EAGER BEAVER Model 18HA Tandem Axle Tag-A-Long Trailer, VIN# 18HA7816, equipped with 17′ level deck, 5′ beavertail, 5′ ramp, 96″ width, air brakes, spring suspension, and 215/75R17.5 tires. In good condition with good tires. (#119) |
| 34 | $5,000.00 | 2014 CARMATE Model CM714EC-HD, 7′ x 14′ Tandem Axle Cargo Trailer, VIN# 5A3C714D6EL001727, equipped with aluminum cargo body, fold down rear and curbside doors, and 205/75R15 tires. In good condition with good tires. (Purchased New) (#339) |
| 35 | $5,000.00 | 2009 CARMATE Model CM714CC-HD, 7′ x 14′ Tandem Axle Cargo Trailer, VIN# 5A3C714D59L000493, equipped with aluminum cargo body, swing rear and curbside doors, and 205/75R15 tires. In good condition with good tires. (Purchased New) (#326) |
| 36 | $4,600.00 | 2002 TIMBERWOLF 8′ x 20’6″ Tandem Axle Cargo Trailer, VIN# 48FCP242821008205, equipped with aluminum cargo body, fold down rear and curbside doors, and 225/75R15 tires. In good condition with good tires. (VIN# From Registration) (Purchased New) (#296) |
| 37 | $4,500.00 | 2013 RICE Tandem Axle Tilt Deck Tag-A-Long Trailer, VIN# 4RWR12023DH001479, equipped with 48″ stationary deck, 16’6″ tilt deck, 82″ deck width, 14,000# GVWR, and 235/80R16 tires. In good condition with good tires. (VIN# From Registration) (Purchased New) |
| 38 | $2,800.00 | 2006 IMPERIAL Tandem Axle Tilt Deck Tag-A-Long Trailer, VIN# 1T9FS182X60372335, equipped with 18′ x 81″ steel deck with 14″ fixed ramps, spring suspension, 14,000# GVWR, and 235/85R16 tires. In good condition with good tires. (Purchased New) (#310) |
| 39 | $2,250.00 | 2013 PREMIER Tandem Axle Tag-A-Long Trailer, VIN# 5B5LT1424DH002879, equipped with 76″ x 14′ wooden deck, 4′ mesh ramp, 7,000# GVWR, and 205/75R15 tires. In good condition with good tires. (VIN# From Registration) (Purchased New) (#335) |
| 40 | $1,600.00 | 2009 TOP BRAND Single Axle Tag-A-Long Trailer, VIN# 5HLUT12139F090674, equipped with 76″ x 12′ wooden deck, 4′ mesh ramp, 2,990# GVWR, and 205/75R15 tires. In good condition with good tires. (Purchased New) (#319) |
| 41 | $1,600.00 | 2006 TOP BRAND Single Axle Tag-A-Long Trailer, VIN# 5HLUT12107F070024, equipped with 76″ x 12′ wooden deck, 4′ mesh ramp, 2,990# GVWR, and 205/75R15 tires. In good condition with good tires. (VIN# From Registration) (Purchased New) (#311) |
| 42 | $2,800.00 | 1992 BURKETS Model BD.7 Tandem Axle Dump Trailer, VIN# 40BDT1423NMSS0541, equipped with 10′ x 74″ dump body, electric/hydraulic dump, and 205/75R15 tires. In good condition with good tires. (Titled as 1993) (#288) |
| 43 | $5,700.00 | 2016 Shop Made 38′ Tandem Axle Pipe Trailer, VIN# SW139237PA, equipped with 63″ width, pintle hitch, and 225/75R15 tires. In good condition with good tires. (Year Owner Supplied) (Pipe On Trailer NOT INCLUDED) |
| 44 | $400.00 | REEVES Portable Tar Pot, powered by Honda GX270, equipped with propane heat and 7.00×15 tires. In good condition with good tires. |
| 45 | $2,500.00 | AIRMAN Model PDS175S, 175CFM Portable Air Compressor, s/n 53-4012182, powered by Isuzu 4 cylinder diesel engine. In fair to good condition. (Meter Reads 3,572 Hours) |
| 46 | $500.00 | UDEL Model 6X5X6, 3,000 PSI Air Pump, s/n 739, powered by Wisconsin VH4D gas engine, mounted on tandem axle trailer, with in frame fuel tank. |
| 47 | $2,100.00 | AGRIMETAL Skid Mounted Bale Chopper, powered by Honda GX340, 11HP gas engine, equipped with discharge hose. In good condition. |
| 48 | $4,100.00 | TURBO TURF Skid Mounted Straw Blower, powered by Kohler gas engine. In good condition. (No s/n Plate) |
| 49 | $4,100.00 | FINN Model BMS24 Portable Straw Blower, s/n 397, powered by Wisconsin 4 cylinder gas engine, equipped with rotating chute and 6.40×15 tires. In good condition with poor tires. |
| 50 | $6,000.00 | 1995 WOODCHUCK Model W/C17 Portable Disc Chipper, s/n WD-17924, powered by Perkins 4 cylinder diesel engine, equipped with auto feed and 225/75R16 tires. In good condition with good tires. (Meter Reads 00,154 Hours) |
| 51 | $2,000.00 | STOW Model R2000 Econa-Roll Tandem Roller, s/n unknown, powered by Briggs & Stratton 8HP gas engine and hydrostatic transmission, equipped with 28″ split front drums, 32″ smooth rear drum, and water system. In good condition. |
| 52 | $1,000.00 | STOW Model R2000 Econa-Roll Tandem Roller, s/n 6615, powered by Briggs & Stratton 1 cylinder gas engine and hydrostatic transmission, equipped with 28″ split front drums, 32″ smooth rear drum, and water system. In good condition. |
| 53 | $1,000.00 | 1996 DYNAPAC Model 2100V Tandem Roller, s/n 962056, powered by Briggs & Stratton 18HP gas engine and hydrostatic transmission, equipped with 30″ split front drum, 38″ smooth rear drum, and water system. In good condition. (Meter Reads 1,397 Hours) |
| 54 | $17,250.00 | 2017 LAYMOR Model SM300 Self Propelled Broom, s/n 38046, powered by Kubota 3 cylinder diesel engine and hydrostatic transmission, equipped with 92″ hydraulic angle broom, (2) poly water tanks, tow package, ROPS post with canopy, and 205/75R14 tires. In very good condition with very good tires. (Meter Reads 00,104 Hours) |
| 55 | $1,000.00 | 1992 DITCH WITCH Model 1020 Walk Behind Trencher, s/n 1J0814, powered by Honda GX390 gas engine and hydrostatic transmission, equipped with 36″ trencher and electric start. In good condition with good tires. |
| 56 | $2,600.00 | 1980 DITCH WITCH Model R40DD 4×4 Trencher, s/n 408228, powered by Deutz 3 cylinder diesel engine and 4 speed transmission, equipped with model R40A, 6′ trencher, with crumber, 64″ 4-way backfill blade, front wheels weights, ROPS post, and 29x12x50 tires. In good condition with good tires. (Meter Reads 0,182 Hours) |
| 57 | $2,100.00 | 1990 DITCH WITCH Model 6510DD 4×4 Combination Trencher/Backhoe, s/n 6G1801, powered by Deutz 4 cylinder diesel engine and 4 speed transmission, equipped with model A420 backhoe attachment, with 12″ bucket, model A615, 7′ trencher with crumber, 72″ backfill blade, ROPS post, and 31x50x15 tires. In good condition with good tires. (Meter Reads 1,076 Hours) |
| 58 | $2,750.00 | 1974 MACK Model RL685LS Tandem Axle Boom Truck, VIN# RL685LS24834, powered by Mack ENDT675 diesel engine and 6 speed lo-hole transmission, equipped with Utility 21’6″ steel body with Utility/DOHP 50 derrick 3-section boom, s/n 94557, aluminum frame, (4) hydraulic outriggers, walking beam suspension, and 10.00×20 tires. In fair condition with fair to good tires. (Odometer Reads 038,635 Miles) (Outriggers Leaking) |
| 59 | $6,750.00 | DROTT Model 160RF2, 8 Ton Carry Deck Crane, s/n 228D, powered by Detroit 3 cylinder diesel engine and hydrostatic transmission, equipped with 7′ to 20′ 3-section hydraulic boom, 4-wheel steer, (4) hydraulic outriggers, and 385/65R22.5 tires. In fair to good condition with fair tires. (Meter Reads 5,750 Hours) |
| 60 | $19,500.00 | 2005 JCB Model 506C, 6,000# Telescopic Rough Terrain Forklift, s/n SLP506C05E0588014, powered by Perkins 4 cylinder diesel engine and shuttle transmission, equipped with 42′ lift height, 3-section hydraulic boom, 48″ forks, auxiliary hydraulics, 4-wheel steer, enclosed ROPS cab with heat, and 13.00×24 tires. In good condition with good tires. (Meter Reads 3,601 Hours) (RESERVED FOR USE DURING LOADOUT UNTIL WED., AUGUST 20TH AT 12:00 NOON) |
| 61 | $33,500.00 | 2014 JOHN DEERE Model 310SK, 4×4 Tractor Loader Extend-A-Hoe, s/n 266510, powered by JD diesel engine and powershift transmission, equipped with general purpose loader bucket with bolt-on cutting edge, 24″ digging bucket with bolt-on straight edge, John Deere front hydraulic coupler and manual rear coupler, rear auxiliary hydraulics, ride control, enclosed ROPS cab with heat and air conditioning, 12.5/80-18 front and 19.5Lx24 rear tires. In good condition with fair tires. (Meter Reads 2,801 Hours) (Purchased New) |
| 62 | $22,000.00 | 2003 JOHN DEERE Model 310G, 4×4 Tractor Loader Backhoe, s/n 912375, powered by JD diesel engine and shuttle transmission, equipped with general purpose loader bucket, WB 12″ digging bucket, rear auxiliary hydraulics, rear manual coupler, enclosed ROPS cab with heat and air conditioning, 12×16.5 front and 19.5Lx24 rear tires. In good condition with good to very good tires. (Meter Reads 5,217 Hours) (Purchased New) |
| 63 | $4,000.00 | RAMMER 777E Hydraulic Demolition Hammer (JD 310) |
| 64 | $300.00 | HENSLEY 18″ Digging Bucket (JD 310) |
| 65 | $0.00 | HENSLEY 12″ Digging Bucket, with bolt-on cutting edge (JD 310) |
| 66 | $0.00 | HENSLEY 12″ Digging Bucket, with bolt-on cutting edge (JD 310) |
| 67 | $16,000.00 | 1985 CATERPILLAR Model 926 Rubber Tired Loader, s/n 94Z01026, powered by Cat 3204 diesel engine and powershift transmission, equipped with general purpose loader bucket with bolt-on cutting edge, 94″ fork attachment with hydraulic clamp, enclosed ROPS cab with heat, and 17.5×25 tires. In fair to good condition with good tires. (Meter Reads 2,516 Hours) (RESERVED FOR USE DURING LOADOUT UNTIL WED., AUGUST 20TH AT 12:00 NOON) |
| 68 | $12,000.00 | 1985 CATERPILLAR Model 936 Rubber Tired Side Boom Loader, s/n 33Z01365, powered by Cat 4 cylinder diesel engine and powershift transmission, equipped with Midwest hydraulic side boom with Ramsey winch, hydraulic left side dump bucket, enclosed ROPS cab, and 20.5×25 tires. In fair condition with fair tires. (Meter Reads 9,697 Hours) |
| 69 | $27,000.00 | 2008 YANMAR Model C50R-3B Crawler Dumper, s/n 45596C, powered by Yanmar 4 cylinder diesel engine and hydraulic drive, equipped with 8’6″ bed with fold-down sides, 42″ stake sides, enclosed ROPS cab, and 18″ rubber tracks. In good condition with good tracks. (Meter Reads 1,247 Hours) (Purchased New) |
| 70 | $61,000.00 | 2004 JOHN DEERE Model 650H LT Crawler Tractor, s/n 938372, powered by JD diesel engine and hydrostatic transmission, equipped with 6-way straight blade, JD rear hydraulic winch, enclosed ROPS cab with forestry package, heat and air conditioning, and 18″ SBG pads. In good condition with good undercarriage. (Meter Reads 4,197 Hours) (Purchased New) |
| 71 | $14,500.00 | 1974 CATERPILLAR Model D7F Crawler Tractor, s/n 94N8258, powered by Cat 3306 diesel engine and powershift transmission, equipped with C-frame manual angle straight blade with dual tilt, Hyster rear winch with draw bar, ROPS canopy, and 24″ SBG pads. In fair condition with fair undercarriage. (Low Hours on Rods and Mains, and Water Pump) |
| 71A | $2,000.00 | UNUSED CAT Idlers, Track Chains, and Sprocket Segments (Cat D7F) |
| 72 | $26,000.00 | 2012 HYUNDAI Model 35Z-9 Robex Mini Hydraulic Excavator, s/n HHKHMH03PC0000188, powered by Yanmar 3 cylinder diesel engine and hydraulic drive, equipped with 4’3″ dipper stick with auxiliary hydraulics, WB manual coupler, CP 17″ digging bucket with bolt-on straight edge, swing boom, Amulet 10″ hydraulic thumb, 69″ backfill blade, pattern changer, enclosed ROPS cab with heat and air conditioning, and 12″ rubber tracks. In good condition with good tracks. (Meter Reads 1,948 Hours) (Purchased New) |
| 73 | $18,000.00 | 2006 YANMAR Model B7-5A Mini Hydraulic Excavator, s/n 58083B, powered by Yanmar 4 cylinder diesel engine and hydraulic drive, equipped with 5’7″ dipper stick with auxiliary hydraulics, articulated boom, WB manual coupler, Tag 18″ digging bucket with bolt-on straight edge, WB 17″ hydraulic thumb, 89″ backfill blade, pattern changer, enclosed ROPS cab with heat and air conditioning, and 17.5″ rubber tracks. In good condition with fair to good tracks. (Meter Reads 05,358 Hours) (Purchased New) |
| 74 | $17,500.00 | 2007 YANMAR Model B7-5A Mini Hydraulic Excavator, s/n 58371B, powered by Yanmar 4 cylinder diesel engine and hydraulic drive, equipped with 5’7″ dipper stick with auxiliary hydraulics, articulated boom, WB manual coupler, Hensley 24″ digging bucket with bolt-on straight edge, Tag 17″ hydraulic thumb, 89″ backfill blade, pattern changer, enclosed ROPS cab with heat and air conditioning, and 17.5″ rubber tracks. In good condition with very good tracks. (Meter Reads 07,684 Hours) (Purchased New) (RESERVED FOR USE DURING LOADOUT UNTIL TUESDAY 8/19/25 AT NOON) |
| 75 | $17,500.00 | 2006 YANMAR Model B7-5A Mini Hydraulic Excavator, s/n 58040B, powered by Yanmar 4 cylinder diesel engine and hydraulic drive, equipped with 5’7″ dipper stick with auxiliary hydraulics, articulated boom, WB manual coupler, WB 16″ digging bucket, 12″ hydraulic thumb, 89″ backfill blade, pattern changer, enclosed ROPS cab with heat and air conditioning, and 17.5″ rubber tracks. In good condition with good tracks. (Meter Reads 08,203 Hours) (Purchased New) (RESERVED FOR USE DURING LOADOUT UNTIL TUESDAY 8/19/25 AT NOON) |
| 76 | $17,000.00 | 2007 YANMAR Model B7-5A Mini Hydraulic Excavator, s/n 58352B, powered by Yanmar 4 cylinder diesel engine and hydraulic drive, equipped with 5’7″ dipper stick with auxiliary hydraulics, articulated boom, WB manual coupler, WB 18″ digging bucket with bolt-on straight edge, WB 17″ hydraulic thumb, 89″ backfill blade, pattern changer, enclosed ROPS cab with heat and air conditioning, and 13″ SBG pads. In good condition with good undercarriage. (Meter Reads 07,110 Hours) |
| 77 | $48,000.00 | 2016 YANMAR Model SV100-2A Hydraulic Excavator, s/n 21223, powered by Yanmar diesel engine and hydraulic drive, equipped with 6’5″ dipper stick with auxiliary hydraulics, hydraulic coupler, Tag 18″ digging bucket with bolt-on straight edge, Tag 17″ hydraulic thumb, 91″ backfill blade, pattern changer, enclosed ROPS cab with heat and air conditioning, and 19″ SBG pads. In good condition with good undercarriage. (Meter Reads 2,601 Hours) (Purchased New) |
| 78 | $55,000.00 | 2006 KOBELCO Model SK160LC Hydraulic Excavator, s/n YM03-U1405, powered by Isuzu 4 cylinder diesel engine and hydraulic drive, equipped with 10′ dipper stick with auxiliary hydraulics, JRB hydraulic coupler, WB 36″ digging bucket, Geith 24″ hydraulic thumb, pattern changer, enclosed ROPS cab with heat and air conditioning, and 25.5″ SBG pads. In good condition with good undercarriage. (Meter Reads 4,224 Hours) (Purchased New) |
| 79 | $26,500.00 | ALLU DH3-12 Hydraulic Screening Bucket, s/n DH31212316 (JD 210) |
| 80 | $8,500.00 | CAT H120CS Hydraulic Demolition Hammer (JD 245) |
| 81 | $2,550.00 | ALLIED 730 Hydraulic Demolition Hammer (Yanmar SV100/B7-5A) |
| 82 | $2,750.00 | ALLIED 730 Hydraulic Demolition Hammer (Yanmar SV100/B7-5A) |
| 83 | $1,750.00 | ALLIED 8700C Hydraulic Plate Compactor (Yanmar SV100/B7-5A) |
| 84 | $2,000.00 | BRADCO SG15 Hydraulic Stump Grinder (Yanmar B7-5A) |
| 85 | $50.00 | NEC 48″ Compaction Wheel (Yanmar B7-5A) |
| 85A | $25.00 | (2) Reel Carriers (Yanmar SV100/B7-5A) |
| 86 | $1,100.00 | CP 24″ Digging Bucket (Kobelco SK160) |
| 87 | $210.00 | TAG 24″ Digging Bucket, with bolt-on cutting edge (Yanmar SV100/B7-5A) |
| 88 | $375.00 | WB 18″ Digging Bucket, with bolt-on cutting edge (Yanmar SV100/B7-5A) |
| 89 | $375.00 | TAG 12″ Digging Bucket, with bolt-on cutting edge (Yanmar SV100/B7-5A) |
| 90 | $275.00 | TAG 12″ Digging Bucket, with bolt-on cutting edge (Hyundai 35Z-9) |
| 91 | $35.00 | 31″ Digging Bucket |
| 92 | $35.00 | 17″ Digging Bucket |
| 93 | $35.00 | 12″ Digging Bucket |
| 94 | $35.00 | 12″ Digging Bucket |
| 95 | $35.00 | 12″ Digging Bucket |
| 96 | $75.00 | ADCO 16″ V-Rock Bucket |
| 97 | $150.00 | ADCO 18″ V-Rock Bucket |
| 98 | $75.00 | ADCO 24″ V-Rock Bucket |
| 99 | $75.00 | ADCO 24″ V-Rock Bucket |
| 100 | $75.00 | WB 26″ V-Rock Bucket |
| 101 | $6,600.00 | FFC/PALADIN 74″ Hydraulic Landscape Rake (Skid Steer) |
| 102 | $100.00 | 48″ Hanging Forks |
| 102A | $250.00 | 47″ Hanging Block Forks |
| 102B | $550.00 | 47″ Hanging Block Forks |
| 102C | $275.00 | CYCLONE Seeder (3-Point Hitch) |
| 102D | $300.00 | 70″ Tow Behind York Rake |
| 103 | $1,000.00 | Concrete Bucket |
| 104 | $40,000.00 | 2008 DARBY Model HPB6-20, 6″ – 20″ Tow Behind Pipe Bender, s/n 10853, powered by Cat 3054C diesel engine, equipped with Quincy 2-stage hydraulic air compressor and 11.00×16 tires. In good condition with good tires. (Meter Reads 00,625 Hours) (Purchased New) |
| 105 | $25,000.00 | Early 1990’s DARBY Model 6-20, 6″ – 20″ Tow Behind Pipe Bender, s/n 79376, powered by Winsconsin 4 cylinder gas engine, equipped with Quincy gas powered air compressor, hydraulic winch, and 11.00×16 tires. In good condition with good tires. (Meter Reads 1,005 Hours) (Purchased New) |
| 106 | $3,700.00 | 16″ Lined Bending Shoe Set |
| 107 | $3,700.00 | 16″ Lined Bending Shoe Set |
| 108 | $3,700.00 | 16″ Lined Bending Shoe Set |
| 109 | $3,700.00 | 16″ Lined Bending Shoe Set |
| 110 | $4,500.00 | 12″ Lined Bending Shoe Set |
| 111 | $4,500.00 | 12″ Lined Bending Shoe Set |
| 112 | $4,500.00 | 12″ Lined Bending Shoe Set |
| 113 | $4,500.00 | 12″ Lined Bending Shoe Set |
| 114 | $3,000.00 | 10″ Lined Bending Shoe Set |
| 115 | $3,000.00 | 10″ Lined Bending Shoe Set |
| 116 | $3,000.00 | 10″ Lined Bending Shoe Set |
| 117 | $3,550.00 | 8″ Lined Bending Shoe Set |
| 118 | $3,000.00 | 8″ Lined Bending Shoe Set |
| 119 | $3,550.00 | 8″ Lined Bending Shoe Set |
| 120 | $3,000.00 | 8″ Lined Bending Shoe Set |
| 121 | $3,000.00 | 6″ Lined Bending Shoe Set |
| 122 | $900.00 | (8) 8″ to 16″ Pinup Shoes |
| 123 | $900.00 | (7) 10″ Pinup Shoes |
| 124 | $10.00 | (4 Pallets) 10″ and 16″ Bending Shoe Parts |
| 125 | $8,500.00 | 1978 MICHAEL BYRNE Model G30200 Horizontal Boring Machine, s/n 8765, powered by VM 2 cylinder diesel engine and 4 speed transmission, 30″ auger capacity, 30′ of track, and assorted collars. In good condition. (Meter Reads 0,348 Hours) |
| 126 | $7,000.00 | 1996 BOR-IT Model 20 Horizontal Boring Machine, s/n 200196, powered by Kohler 2 cylinder gas engine and 4 speed transmission, equipped with 20″ auger capacity, 27′ of track, and assorted collars. In good condition. |
| 127 | $2,800.00 | 20″ Auger Flygt, 3″ shank, 184+/- LF |
| 128 | $3,100.00 | 16″ Auger Flygt, 3″ shank, 120+/- LF |
| 129 | $2,800.00 | 12″ Auger Flygt, 2-1/4″ shank, 150+/- LF |
| 130 | $2,300.00 | 10″ Auger Flygt, 2-1/4″ shank, 180+/- LF |
| 131 | $200.00 | 8″ Auger Flygt, 2-1/4″ shank, 157+/- LF |
| 132 | $800.00 | 6″ Auger Flygt, 1-5/8″ shank, 93+/- LF |
| 133 | $800.00 | 4″ Auger Flygt, 1/3/8″ shank, 44+/- LF |
| 134 | $1,600.00 | 20″ Auger Rock Head, 3″ shank |
| 135 | $1,900.00 | 20″ Auger Rock Head, 3″ shank |
| 136 | $1,900.00 | 16″ Auger Rock Head, 3″ shank |
| 137 | $1,900.00 | 16″ Auger Rock Head, 3″ shank |
| 138 | $1,200.00 | 14″ Auger Rock Head, 3″ shank |
| 139 | $1,500.00 | 12″ Auger Rock Head, 3″ shank |
| 140 | $1,200.00 | 24″ Auger Dirt Head, 3″ shank |
| 141 | $1,200.00 | 16″ Auger Dirt Head, 3″ shank |
| 142 | $1,200.00 | (2) 10″ Auger Rock Heads, 2-1/4″ shank |
| 143 | $1,200.00 | 18″ Auger Rock Head, 2-1/4″ shank |
| 144 | $1,200.00 | (3) 12″ Auger Rock Heads, 2-1/4″ shank |
| 145 | $1,200.00 | (3) 8″ Auger Rock Heads, 2-1/4″ shank |
| 146 | $1,600.00 | (3) 20″ Auger Dirt Heads, 2-1/4″ shank |
| 147 | $200.00 | 16″ Auger Dirt Head, 2-1/4″ shank |
| 148 | $600.00 | (3) 12″ Auger Dirt Heads, 2-1/4″ shank |
| 149 | $600.00 | (3) 10″ Auger Dirt Heads, 2-1/4″ shank |
| 150 | $600.00 | (1) 6″ Rock and (1) 6″ Dirt Auger Heads, 1-5/8″ shank |
| 151 | $250.00 | 4″ Auger Dirt Head, 1-3/8″ shank |
| 151A | $100.00 | (8) Assorted Rock Heads and Dirt Heads |
| 152 | $2,000.00 | (2 Pallets) Auger Adaptors and Connectors |
| 153 | $1,600.00 | Auger Head Teeth and Parts |
| 154 | $31,000.00 | 2001 MCELROY Model Tracstar 412 Crawler Pipe Fusion Machine, s/n C01605, powered by Yanmar 18HP diesel engine and hydraulic drive. In good condition with good undercarriage. (Meter Reads 00,018 Hours) (Purchased New) |
| 155 | $8,000.00 | MCELROY 4″ to 8″ Portable Pipe Fusion Machine, with hydraulic pipe shaver and heating paddle |
| 156 | $4,000.00 | MCELROY 4″ to 8″ Portable Pipe Fusion Machine, with pipe shaver and heating paddle |
| 157 | $4,000.00 | MCELROY 4″ to 8″ Portable Pipe Fusion Machine, with pipe shaver and heating paddle |
| 158 | $2,500.00 | Hydraulic Pulling Machine, with head and NEW cable |
| 159 | $50.00 | DARBY Bending Shoe Molds |
| 201 | $700.00 | STIHL TS420 Demo Saw, with cart and water system |
| 202 | $350.00 | STIHL TS460 Demo Saw (Not Running) |
| 203 | $700.00 | STIHL TS460 Demo Saw |
| 204 | $170.00 | ICS RZ60 Demo Saw |
| 205 | $750.00 | STIHL MS660 Chain Saw |
| 206 | $475.00 | STIHL MS441 Chain Saw |
| 207 | $500.00 | STIHL MS440 Chain Saw |
| 208 | $425.00 | STIHL MS361 Chain Saw |
| 209 | $180.00 | STIHL MS230C Chain Saw |
| 210 | $30.00 | POULAN Wild Thing 2375 Chain Saw |
| 211 | $0.05 | Electric Chain Saw and Hedge Trimmer |
| 212 | $900.00 | WACKER WP1550 Plate Compactor, Honda GX160 gas |
| 213 | $650.00 | WACKER WPG165A Plate Compactor, Honda GX160 gas |
| 214 | $1,500.00 | MIKASA MTX-70HD Foot Compactor, Honda GX100 gas |
| 215 | $1,000.00 | BOMAG BT66/4 Foot Compactor, Honda GX100 gas |
| 216 | $1,000.00 | WACKER BS600 Foot Compactor, 80ccm gas |
| 217 | $950.00 | WACKER BS600 Foot Compactor, 80ccm gas |
| 218 | $650.00 | WACKER BS500 Foot Compactor, 80ccm gas |
| 219 | $400.00 | WACKER BS60Y Foot Compactor, Wacker gas |
| 220 | $900.00 | BOMAG BT65/4 Foot Compactor, Honda GX100 gas |
| 221 | $65.00 | CONSERVAIR CPB90-12 Pneumatic Booster Pump, s/n 90011 |
| 222 | $550.00 | GORMAN RUPP 2″ x 3″ High Pressure Pump, Kohler Command Pro 23 gas |
| 223 | $120.00 | PACIFIC 3″ Portable Trash Pump, CMXX 208cc gas |
| 224 | $100.00 | TITAN 3″ Portable Trash Pump, Briggs & Stratton 5.5HP gas |
| 225 | $210.00 | TSURUMI 3″ Trash Pump, Honda GX160 gas |
| 226 | $230.00 | TAHOE 3″ Trash Pump, Honda GX200 gas |
| 227 | $40.00 | HOMELITE 3″ Trash Pump, Briggs & Stratton 8HP gas |
| 228 | $30.00 | HOMELITE 2″ Trash Pump, 3HP gas |
| 229 | $425.00 | WACKER PD2, 2″ Portable Diaphragm Pump, Honda GX120 gas |
| 230 | $425.00 | WACKER PD2, 2″ Portable Diaphragm Pump, Honda GX120 gas |
| 231 | $275.00 | WACKER PD3A, 3″ Portable Diaphragm Pump, Honda GX120 gas |
| 232 | $160.00 | STOWE 3″ Portable Diaphragm Pump, Briggs & Stratton 5HP gas |
| 233 | $25.00 | STOW 2″ Portable Diaphragm Pump, Briggs & Stratton 127cc gas |
| 234 | $120.00 | WACKER PD2, 2″ Portable Diaphragm Pump, Honda GX120 gas |
| 235 | $55.00 | STOW 2″ Portable Diaphragm Pump, Briggs & Stratton 3.5HP gas |
| 236 | $21.00 | (2) ARO 1″ Pneumatic Diaphragm Pumps and Air Hose |
| 237 | $400.00 | TITAN 7500 Watt High Performance Portable Generator, Briggs & Stratton gas, with electric start |
| 238 | $170.00 | WILDFIRE WF6500EW Portable Generator, Jiangsu gas, with electric start |
| 239 | $475.00 | HONDA 6500X Portable Generator, Honda GX390 gas |
| 240 | $100.00 | BRIGGS & STRATTON 5500 Watt, 8550 Starting Watt Generator, 10HP gas |
| 241 | $600.00 | TITAN 2-Stage Portable Air Compressor, Briggs & Stratton 5.5HP gas |
| 242 | $400.00 | TAHOE 2-Stage Portable Air Compressor, Honda GX200 gas |
| 243 | $160.00 | DEWALT 3750PSI Portable Pressure Washer, Honda GX390 gas |
| 244 | $400.00 | STIHL MM55, 24″ Walk Behind Power Sweeper, with spare head |
| 245 | $3,200.00 | RIDGID 300-12 Pipe Threader, with cutter, reamer, foot control, tripod, and oiler |
| 246 | $450.00 | RIDGID 700 Pipe Threader, with dies and oiler |
| 247 | $160.00 | RIDGID No 460 Tri-Stand, with pipe vise and bending slots |
| 248 | $60.00 | RIDGID Manual Threaders and Pipe Vises |
| 249 | $3,800.00 | FOOTAGE 12″ Pipe Squeezing Tool, s/n C1200-0037, with hydraulic pump |
| 250 | $3,800.00 | FOOTAGE 12″ Pipe Squeezing Tool, s/n C1200-0038 |
| 251 | $1,100.00 | FOOTAGE 6″ Pipe Squeezing Tool, s/n C400-0523 |
| 252 | $1,100.00 | FOOTAGE 6″ Pipe Squeezing Tool, s/n C400-0522 |
| 253 | $650.00 | (2) Pipe Squeezing Tools, with hydraulic pump |
| 254 | $650.00 | (2) Pipe Squeezing Tools, with hydraulic pump |
| 255 | $230.00 | (3) Pipe Squeezing Tools, with hydraulic pump |
| 256 | $275.00 | Pipe Squeezing Tools, Parts, and Accessories, with hydraulic pump |
| 257 | $150.00 | Manual Hydraulic Pipe Squeezing Tools and Spare Jacks |
| 258 | $700.00 | 2″ Pipe Tap Tool |
| 259 | $325.00 | 3″ Pipe Tap Tool |
| 260 | $275.00 | 4″ Pipe Tap Tool |
| 261 | $210.00 | 4″ Pipe Tap Tool |
| 262 | $2,700.00 | Pipe Tap Drive Tools |
| 263 | $110.00 | REYNOLDS 500# Pressure Guage, with accessories |
| 264 | $40.00 | 3,000# Pressure Guage, with accessories |
| 265 | $55.00 | 500# Pressure Guage, with accessories |
| 266 | $750.00 | Spy Jeep, with accessories |
| 267 | $1,100.00 | Spy Jeep, with accessories |
| 268 | $750.00 | METROTECH 810 Locator |
| 269 | $425.00 | H&M 26″ Pipe Beveler |
| 269A | $150.00 | H&M 26″ Pipe Beveler, with mitre collars |
| 270 | $500.00 | H&M 20″ Pipe Beveler |
| 271 | $190.00 | CRC-CROSE 14″ Pipe Beveler |
| 271A | $650.00 | (2) H&M 8″ Pipe Bevelers |
| 272 | $2,800.00 | MCELROY 2″ to 4″ Fusion Machine, with accessories |
| 273 | $2,600.00 | MCELROY 2″ to 4″ Fusion Machine, with accessories |
| 274 | $1,600.00 | MCELROY 2″ to 4″ Fusion Machine, with accessories |
| 275 | $180.00 | MCELROY Fusion Clamp and Accessories |
| 276 | $140.00 | MCELROY Fusion Clamp and Accessories |
| 277 | $425.00 | MCELROY Fusion Clamp and Heating Iron |
| 278 | $425.00 | MCELORY Fusion Clamp, Heating Iron, and Shoes |
| 279 | $600.00 | MCELORY Fusion Clamp, Heating Iron, and Shoes |
| 280 | $230.00 | MCELORY Fusion Clamp |
| 281 | $210.00 | MCELORY Fusion Clamp |
| 282 | $210.00 | MCELORY Fusion Clamp |
| 283 | $230.00 | MCELORY Fusion Clamp |
| 284 | $170.00 | MCELORY Fusion Clamp |
| 285 | $160.00 | MCELORY Fusion Clamp |
| 286 | $7.00 | MCELORY Fusion Clamp |
| 287 | $1,300.00 | MCELORY Heating Irons and Temperature Guage |
| 288 | $275.00 | MCELROY Heating Irons |
| 289 | $300.00 | MCELROY Side Winder and Accessories |
| 290 | $500.00 | MCELROY Side Winder and Accessories |
| 291 | $95.00 | MCELROY Roller Cart |
| 292 | $100.00 | MCELROY Roller Cart |
| 293 | $25.00 | MCELROY Pipe Clamp Cart |
| 294 | $250.00 | Assorted Iron Shoes |
| 295 | $500.00 | Assorted Fusion Parts |
| 296 | $65.00 | FRIATEC Electric Fusion Machine |
| 297 | $2,000.00 | IPEX Genesis F3 Electric Fusion Machine |
| 298 | $21.00 | Thermoplastic Electric Fusion Machine |
| 299 | $0.30 | VIRAX Pipe Shaver |
| 300 | $0.30 | VIRAX Pipe Shaver |
| 301 | $5.00 | VIRAX Pipe Shaver |
| 302 | $110.00 | Pipe Shaver |
| 303 | $25.00 | FRIATEC 8″ Pipe Scraper |
| 304 | $550.00 | 8″ Pipe Scraper |
| 305 | $425.00 | 4″ Pipe Scraper |
| 306 | $275.00 | 3″ Pipe Scraper |
| 307 | $275.00 | 2″ Pipe Scraper |
| 308 | $25.00 | 2″ Pipe Scraper |
| 309 | $0.25 | Portable Battery Pack, with (3) batteries and charger |
| 310 | $550.00 | Manual Lineup Pin Set |
| 311 | $750.00 | Aluminum Lineup Tools |
| 312 | $2,600.00 | REED Manual Pipe Cutters |
| 313 | $3,100.00 | REED Manual Pipe Cutters |
| 314 | $700.00 | RIDGID Manual Pipe Cutters |
| 315 | $800.00 | Manual Pipe Cutters |
| 316 | $600.00 | Manual Pipe Cutters |
| 317 | $750.00 | TARGET Model Pro65 II Walk Behind Concrete Saw, s/n 211971, powered by Wisconsin 65HP gas engine and hydrostatic transmission, equipped with water system and (2) blades. (Meter Reads 00,051 Hours) |
| 318 | $450.00 | TARGET Model 6505 Walk Behind Concrete Saw, s/n 001145, powered by Wisconsin 65HP gas engine and hydrostatic transmission, equipped with water system and (3) blades (Meter Reads 1,759 Hours) |
| 319 | $1,900.00 | TARGET Model Port-A-Cut IV Walk Behind Concrete Saw, s/n 883140, powered by Kohler GX620 gas engine and hydrostatic transmission, equipped with water system and (2) blades. |
| 320 | $300.00 | TARGET Super 20 Electric Masonry Saw, with stand |
| 321 | $3,700.00 | LINCOLN SA200, 200 Amp Skid Mounted Welder, s/n A-42487, gas engine, with leads |
| 322 | $1,200.00 | CUB CADET Model 100 Tractor, powered by gas engine and direct drive, equipped with Sweepster 42″ broom attachment. |
| 323 | $65.00 | EMPIRE P-350 Portable Sandblast Pot, with whipline and hood |
| 324 | $325.00 | CLEMCO 1642 Portable Sandblast Pot, with whipline, 12 volt cooler, and accessories |
| 325 | $325.00 | CLEMCO 1042 Portable Sandblast Pot, with whipline, 12 volt cooler, and accessories |
| 326 | $425.00 | MARCO Portable Sandblast Pot, with whipline |
| 327 | $400.00 | ALLIED Hole-Hog 5″ Pneumatic Underground Piercing Tool, reversible |
| 328 | $800.00 | ALLIED Hole-Hog 4″ Pneumatic Underground Piercing Tool, with 5″ collar, reversible |
| 329 | $1,300.00 | ALLIED Hole-Hog 4″ Pneumatic Underground Piercing Tool, reversible |
| 330 | $550.00 | ALLIED Hole-Hog 4″ Pneumatic Underground Piercing Tool, reversible |
| 331 | $850.00 | ALLIED Hole-Hog 3″ Pneumatic Underground Piercing Tool, reversible |
| 332 | $700.00 | ALLIED Hole-Hog 3″ Pneumatic Underground Piercing Tool, reversible |
| 333 | $600.00 | ALLIED Hole-Hog 3″ Pneumatic Underground Piercing Tool, reversible |
| 334 | $550.00 | ALLIED Hole-Hog 4″ Pneumatic Underground Piercing Tool, reversible |
| 335 | $475.00 | ALLIED Hole-Hog 4″ Pneumatic Underground Piercing Tool, reversible |
| 336 | $2,900.00 | ALLIED Hole-Hog 2-1/2″ Pneumatic Underground Piercing Tool, reversible |
| 337 | $1,200.00 | ALLIED Hole-Hog 2″ Pneumatic Underground Piercing Tool, reversible |
| 338 | $2,000.00 | ALLIED Hole-Hog 2″ Pneumatic Underground Piercing Tool, reversible |
| 339 | $400.00 | ALLIED Hole-Hog 2″ Pneumatic Underground Piercing Tool, reversible |
| 340 | $110.00 | Piercing Tool Collars |
| 341 | $2,100.00 | (1) 4′ x 9′ x 2″, (1) 4′ x 4′ x 2″, (1) 3′ x 12′ x 2″, and (1) 10’8″ x 8′ x 1/2″ Steel Plates |
| 341A | $0.00 | Blasting Mats |
| 342 | $2,000.00 | (13) 4′ x 8′ Poly Mats |
| 343 | $4,400.00 | 8′ x 15′ x 3/4″ Road Plate (Top Plate of Stack Only) |
| 344 | $4,400.00 | 8′ x 15′ x 3/4″ Road Plate (Middle Plate of Stack Only) |
| 345 | $4,400.00 | 8′ x 15′ x 3/4″ Road Plate (Bottom Plate of Stack Only) |
| 346 | $1,100.00 | 8′ x 15′ x 1/2″ Road Plate (Bottom Plate of Stack Only) |
| 347 | $1,500.00 | (2) 6’4″ x 13’5″ x 1/2″ Road Plate (Top 2 Plates of Stack Only) |
| 348 | $2,600.00 | (4) 8′ x 10′ x 1/2″ Road Plate (Bottom 4 Plates of Stack Only) |
| 349 | $600.00 | (2) 7’6″ x 7′ x 3/8″ Road Plate (Top 2 Plates of Stack Only) |
| 350 | $7,500.00 | (3) 10′ x 8′ x 3/4″ Road Plate (Top 3 Plates of Stack Only) |
| 351 | $7,500.00 | (3) 10′ x 8′ x 3/4″ Road Plate (Bottom 3 Plates of Stack Only) |
| 352 | $4,100.00 | (3) 10′ x 6′ x 1″ Road Plate |
| 353 | $1,100.00 | (1) 7’6″ x 14′ x 1/2″ and (1) 7’6″ x 11′ x 1/2″ Road Plate |
| 354 | $700.00 | (2) 7’6″ x 14′ x 1/4″ and (1) 7’6″ x 15′ x 1/4″ Road Plate |
| 355 | $4,500.00 | EFFICIENCY 8′ x 14′ x 3″ Aluminum Trench Box, with 60″ to 96″ adjustable spreaders |
| 356 | $4,500.00 | EFFICIENCY 8′ x 12′ x 3″ Aluminum Trench Box, with 52″ to 88″ adjustable spreaders |
| 357 | $4,600.00 | EFFICIENCY 8′ x 12′ x 3″ Aluminum Trench Box, with 52″ to 88″ adjustable spreaders |
| 358 | $1,300.00 | (8) EFFICIENCY 42″ to 69″ adjustable spreaders |
| 359 | $2,100.00 | EFFICIENCY 4′ x 8′ Trench Box, with adjustable spreaders |
| 360 | $2,100.00 | EFFICIENCY 4′ x 8′ Trench Box, with adjustable spreaders |
| 361 | $450.00 | EFFICIENCY 8′ Trench Box Panels (No Cert) |
| 362 | $1,500.00 | SPEED SHORE Trench Shoring, with wood panels and pump |
| 363 | $1,500.00 | SPEED SHORE Trench Shoring, with wood panels and pump |
| 364 | $1,300.00 | SPEED SHORE Trench Shoring, with wood panels and pump |
| 365 | $1,500.00 | SPEED SHORE Trench Shoring, with wood panels and pump |
| 366 | $210.00 | GRANITE Adjustable Scaffold System, with Louisville scaffold planks |
| 367 | $1,100.00 | Pneumatic Pipe Levelers, with hose and gauges |
| 368 | $425.00 | (10) Water Filled Barricades |
| 369 | $150.00 | 24″ TBG Pads (Kobelco SK160) |
| 369A | $30.00 | Hydraulic Demolition Hammer |
| 369B | $130.00 | Cutting Edges |
| 370 | $475.00 | Cutting Edges and SBG Pads (Cat D9) |
| 370A | $1,800.00 | (8) Jersey Barriers and Barrier Lifter |
| 371 | $800.00 | (5 Pallets) 3.5″ x 5.5″ x 4′ Cribbing |
| 372 | $550.00 | (8) 4′ x 18′ Crane Mats |
| 373 | $1,600.00 | (4) 4′ x 40′ Crane Mats |
| 374 | $130.00 | 6’8″ x 13′ Oilfield Skid |
| 375 | $300.00 | (4) 13′ x 11.5″ Aluminum Ramps |
| 376 | $425.00 | 6’4″ x 20′ and 6’4″ x 14′ Pipe Skids |
| 376A | $160.00 | Steel Plate and Stock Rack |
| 377 | $275.00 | (4) 8′ Pipe Stands |
| 379 | $170.00 | 7′ x 10′ Skid Mounted Storage Container |
| 380 | $7.00 | Metal Storage Box |
| 381 | $375.00 | 16′ Aluminum Truck Body |
| 382 | $95.00 | 18″ Tracks, with bolt on street pads |
| 383 | $275.00 | RAIN MASTER 4″ PTO Driven Pump |
| 384 | $110.00 | (2) 3″ and (2) 2″ Pneumatic Diaphragm Pumps |
| 385 | $230.00 | (3) 2″ Electric Submersible Pumps |
| 386 | $75.00 | (3) 2″ Electric and Pneumatic Submersible Pumps |
| 387 | $200.00 | 2″ and 3″ Discharge Hose |
| 388 | $250.00 | 2″ and 3″ Discharge Hose |
| 389 | $210.00 | 3″ Suction Hose |
| 390 | $170.00 | 3″ Suction Hose |
| 391 | $70.00 | 2″ Suction Hose |
| 392 | $100.00 | 2″ Suction Hose |
| 393 | $12.00 | Air Hose |
| 394 | $18.00 | Air Hose |
| 395 | $110.00 | Air Hose |
| 396 | $21.00 | Water Hose |
| 397 | $170.00 | 2″ High Pressure Hose |
| 398 | $1,000.00 | (2 Pallets) Pipe Clamps |
| 399 | $550.00 | (2 Pallets) Pipe Clamps |
| 400 | $110.00 | (2 Pallets) Pipe Lifters, Pipe Clamps, and Sheave Blocks |
| 401 | $110.00 | (4 Pallets) Bending Shoe Parts |
| 402 | $6.00 | Casing Spacers |
| 403 | $17.00 | Pipe Pusher |
| 404 | $6.00 | Pressure Valves |
| 405 | $15.00 | Threaded Valves |
| 406 | $110.00 | (4 Pallets) Couplers and Pipe Parts |
| 407 | $130.00 | (2 Pallets) Pipe Caps and Plugs |
| 408 | $150.00 | (4 Pallets) Fernco Fittings, Couplers, and Pipe Parts |
| 409 | $6.50 | (6 Pallets) Pipe Couplers, Valves, and Miscellaneous |
| 410 | $55.00 | (2 Pallets) Drill Steel and Bits |
| 411 | $75.00 | (3 Pallets) Assorted Parts |
| 412 | $325.00 | (2) Trailer Ramps |
| 413 | $4,700.00 | Hydraulic Side Boom |
| 413A | $375.00 | (4) Ripper Shanks |
| 414 | $850.00 | TULSA Chain Drive Winch |
| 415 | $325.00 | TULSA Chain Drive Winch, with headache rack |
| 416 | $160.00 | TULSA Chain Drive Winch |
| 417 | $550.00 | (3 Pallets) Signs and Sign Stands |
| 418 | $300.00 | (5 Pallets) Safety Cones, Barrels, and Barricades |
| 419 | $400.00 | (4 Pallets) Safety Fence and Posts |
| 420 | $425.00 | (5 Pallets) Silt Fence and Stakes, Barrier Fence, and Chicken Wire |
| 421 | $140.00 | (2 Pallets) Fire Extinguishers |
| 422 | $120.00 | (2 Pallets) Wire |
| 423 | $75.00 | Bottle Cart and (2) Bottle Racks |
| 424 | $30.00 | (2) Tar Melters and Walk Behind Rollers |
| 425 | $15.00 | (2 Pallets) Heaters and Electric Blower |
| 426 | $13.00 | (2 Pallets) Oil Socks |
| 427 | $220.00 | (2 Pallets) Chains and Binders |
| 428 | $150.00 | (2 Pallets) Chains and Binders |
| 429 | $1,000.00 | (2 Pallets) Chains and Binders |
| 430 | $1,000.00 | (2 Pallets) Chains and Binders |
| 431 | $375.00 | (3 Pallets) Continuous Slings |
| 432 | $11.00 | (3) Shop Made Lifting Beams |
| 433 | $450.00 | (3 Pallets) Slings and Pulling Socks |
| 434 | $275.00 | Wire Rope Spreaders |
| 435 | $300.00 | (2 Pallets) Sheave Blocks, Hook Blocks, and Chain Hoist |
| 436 | $170.00 | Knock Wrenches, Metal Boxes, and Metal Racks |
| 437 | $210.00 | 1,000 Gallon Skid Mounted Steel Tank |
| 438 | $55.00 | Pneumatic Auger and Assorted Size Auger Flygts |
| 439 | $1,700.00 | (10) Pipe Roller Stands |
| 440 | $400.00 | Assorted Size Steel Pipe |
| 442 | $110.00 | Assorted Size Auger Flygts |
| 443 | $110.00 | 4″ Curb Forms |
| 443A | $600.00 | Steel Plate |
| 444 | $210.00 | (6) 4″ and (30) 3″ x 30′ Sections of Aluminum Water Pipe, with connectors |
| 445 | $4,100.00 | 24″ Diameter Steel Pipe |
| 446 | $425.00 | 20″ Diameter Steel Pipe |
| 447 | $325.00 | 12″ Diameter Steel Pipe |
| 448 | $1,600.00 | 8″ Diameter Steel Pipe |
| 449 | $13,750.00 | 15″ Diameter Steel Pipe |
| 449A | $450.00 | Assorted Steel Pipe |
| 450 | $210.00 | (4) Pipe Stands |
| 451 | $210.00 | (4) Pipe Stands |
| 452 | $210.00 | (4) Pipe Stands |
| 453 | $210.00 | (4) Pipe Stands |
| 454 | $300.00 | Lube Station and Contents, and Bolt Bin (BUYER MUST LOAD) |
| 455 | $375.00 | (2) Racks and Contents (BUYER MUST LOAD) |
| 456 | $475.00 | Pipe Wrenches, Bolt Cutters, and Chain Wrenches (BUYER MUST LOAD) |
| 457 | $110.00 | (3) Racks and Contents (BUYER MUST LOAD) |
| 458 | $40.00 | Car Ramps and Creepers (BUYER MUST LOAD) |
| 459 | $650.00 | Shop Bench, with vise and track torch, and (3) Racks and Contents (BUYER MUST LOAD) |
| 459A | $35.00 | Rolling Shop Table and Cart |
| 460 | $45.00 | (2) 2-Wheel Dollys |
| 461 | $350.00 | GRAY TNT 550 Pneumatic Bumper Jack |
| 462 | $425.00 | (2) Floor Jacks |
| 463 | $425.00 | (2) Floor Jacks |
| 464 | $100.00 | (5) Bottle Jacks |
| 465 | $65.00 | (4) Bottle Jacks |
| 466 | $60.00 | (2) Bottle Jacks |
| 467 | $45.00 | (4) Jack Stands |
| 468 | $100.00 | (7) Jack Stands |
| 469 | $140.00 | (5) Jack Stands |
| 470 | $75.00 | (2) Heavy Duty Jack Stands |
| 471 | $180.00 | (2) Heavy Duty Jack Stands |
| 472 | $24.00 | (2) Pipe Stands |
| 473 | $120.00 | LIFTRITE 5,500# Pallet Jack |
| 474 | $55.00 | CHICAGO 12 Speed Drill Press |
| 475 | $650.00 | WELLS Metal Cutting Band Saw, with roller conveyor |
| 476 | $130.00 | Dual Wheel Pedestal Grinder |
| 477 | $190.00 | 14″ Chop Saw |
| 478 | $350.00 | Extension and Step Ladders |
| 479 | $210.00 | Contents of Steel Rack (BUYER MUST LOAD) |
| 480 | $140.00 | LINCOLN Idealarc 250 Arc Welder |
| 481 | $275.00 | LINCOLN SR135 Plus Welder |
| 482 | $110.00 | (2) Battery Chargers |
| 483 | $140.00 | Jump Box and Battery Testers |
| 484 | $140.00 | Gas Startall |
| 485 | $220.00 | Gas Startall |
| 486 | $600.00 | Work Bench, Rack and Contents (BUYER MUST LOAD) |
| 487 | $150.00 | Air Pig and Bead Seater |
| 488 | $850.00 | Porta Powers and Rams |
| 489 | $2,400.00 | Puller Set |
| 490 | $1,100.00 | Cat Puller Set |
| 491 | $90.00 | 3/4″ and 1″ Pneumatic Impact Wrenches |
| 492 | $14.00 | (2) Reciprocating Saws |
| 493 | $16.00 | CRAFTSMAN Air Tools |
| 494 | $6.50 | Heavy Duty Electric Drill |
| 495 | $110.00 | (4) Electric Grinders |
| 496 | $1.00 | (5) Electric Drills |
| 497 | $22.00 | (2) Angle Drills and Nibbler |
| 498 | $140.00 | DEWALT Cordless Tools |
| 499 | $8.00 | 8-1/2″ Sliding Compound Miter Saw |
| 500 | $190.00 | Manual and Pneumatic Lubers and Lube Station |
| 501 | $350.00 | Banding Cart, with tools |
| 502 | $35.00 | (2) Space Heaters |
| 503 | $11.00 | (2) Shop Vacs |
| 504 | $180.00 | (2) Shop Fans (1 Without Motor) |
| 505 | $140.00 | Power Cords |
| 506 | $13.00 | Contents of (3 Sections) of Pallet Rack (BUYER MUST LOAD) |
| 507 | $55.00 | Contents of (4 Sections) of Shelving (BUYER MUST LOAD) |
| 508 | $375.00 | Contents of Racks, Bolt Bins, and Bolt Carousels (BUYER MUST LOAD) |
| 509 | $750.00 | Contents of Back Wall (BUYER MUST LOAD) |
| 510 | $600.00 | Parts Drawers and Contents of Corner (BUYER MUST LOAD) |
| 511 | $110.00 | Contents of (2 Shelves) (BUYER MUST LOAD) |
| 512 | $100.00 | Wire Rope (BUYER MUST LOAD) |
| 513 | $5.50 | (6) Pressure Gauges |
| 514 | $100.00 | (4) Racks and Contents (BUYER MUST LOAD) |
| 515 | $140.00 | (4) Racks and Contents (BUYER MUST LOAD) |
| 516 | $110.00 | (2 Sections) Pallet Racks and Contents (BUYER MUST LOAD) |
| 517 | $95.00 | Pallet Rack and Contents (BUYER MUST LOAD) |
| 518 | $275.00 | Contractors Kit |
| 519 | $110.00 | Contractors Kit |
| 520 | $100.00 | (2) Wheelbarrows and Wood Tool Handles |
| 521 | $375.00 | STIHL HT101 Pole Saw |
| 522 | $325.00 | STIHL FS250 String Trimmer |
| 523 | $190.00 | STIHL FS130 String Trimmer |
| 524 | $170.00 | (3) STIHL String Trimmers |
| 524A | $200.00 | Bull Floats and Straight Edges |
| 525 | $45.00 | (2) Pneumatic Paving Breakers |
| 526 | $50.00 | (2) Pneumatic Paving Breakers |
| 527 | $16.00 | (2) Pneumatic Paving Breakers |
| 528 | $18.00 | (2) Pneumatic Paving Breakers |
| 529 | $16.00 | (2) Pneumatic Rock Drills |
| 530 | $30.00 | (2) Pneumatic Rock Drills |
| 531 | $110.00 | (2) Pneumatic Rock Drills |
| 532 | $21.00 | (2) Pneumatic Rock Drills |
| 533 | $230.00 | (4) Pneumatic Chipping Hammers |
| 534 | $120.00 | (4) Pneumatic Chipping Hammers |
| 535 | $100.00 | (3) Pneumatic Tampers |
| 536 | $80.00 | (4) Pneumatic Tampers |
| 537 | $110.00 | Drill and Hammer Steel |
| 538 | $140.00 | (4) Torque Wrenches |
| 539 | $110.00 | Chain, Snatch and Hook Bocks, and Hitch Vise |
| 540 | $40.00 | Pallet Jack and Hand Truck |
| 541 | $700.00 | Shop Table, (2) Vises, Drill, and Contents of Side of Room (BUYER MUST LOAD) |
| 542 | $90.00 | (3) Bolt Bins, with contents (BUYER MUST LOAD) |
| 543 | $80.00 | CROSE Beveler |
| 544 | $75.00 | Breaker Steel and Rack (BUYER MUST LOAD) |
| 545 | $7.00 | Demolition Hammer Bits |
| 546 | $275.00 | Contents of Shelving Unit, Fencing, and Toolboxes (BUYER MUST LOAD) |
| 547 | $140.00 | (4) Road Plate Lifters |
| 548 | $120.00 | 19.5Lx24 Tire |
| 549 | $55.00 | 13.00×24 Tire |
| 550 | $2.75 | (15) Assorted Tires (BUYER MUST LOAD) |
| 551 | $240.00 | Remaining Contents of Room (BUYER MUST LOAD) |
| 551A | $100.00 | Portable Hydraulic Engine Hoist |
| 551B | $210.00 | Tow Behind Seeder, Lawn Cart, and Plow Attachment |
| 551C | $2.25 | GARDEN WAY 4′ Manual Angle Plow Attachment |
| 551D | $240.00 | (3) Shelves and Contents |
| 552 | $3,100.00 | 1998 GREAT DANE 45′ Tandem Axle Van Storage Trailer and Contents, VIN# 1GRAA9627WS081001, equipped with fiberglass roof, rollup rear door, curbside door, ramp, window air conditioning unit, and 50,000# GVWR. In good condition with good tires. (#309) |
| 553 | $700.00 | 1997 GREAT DANE 45′ Tandem Axle Office/Storage Trailer and Contents, VIN# 1GRAA9026VB078601, equipped with fiberglass roof, swing rear doors, curbside door, window air conditioning unit, 65,000# GVWR, and 295/75R22.5 tires. In good condition with good tires. (#308) |
| 554 | $700.00 | 1979 BUDD Model EF2F450A61, 45′ Tandem Axle Aluminum Van Trailer and Contents, VIN# 171853E, equipped with swing rear doors and 11R22.5 tires. In fair condition with fair tires. |
| 555 | $1,200.00 | 28′ Single Axle Aluminum Van Trailer, PA Special Plate #1C0V2761785027651, equipped with rollup rear door and single axle tow dolly. In fair condition with fair to poor tires. (No Title) |
| 556 | $1,300.00 | FRUEHAUF Model SSVVXL5F235F, 34′ Tandem Axle Aluminum Van Trailer and Contents (filters), VIN# FWF431704, equipped with rollup rear door, curbside door, and mixed tires. In fair condition with fair tires. (Missing (4) Tires) |
| 557 | $1,300.00 | 1978 BUDD Model EF2E450A61, 45′ Tandem Axle Aluminum Van Trailer and Contents (sonotube), VIN# 156582E, equipped with swing rear doors and 10.00×20 tires. In fair condition with fair tires. |
| 558 | $400.00 | 16′ Aluminum Van Body, equipped with swing rear doors |
| 559 | $300.00 | 16′ Skid Mounted Aluminum Van Body and Contents |
| 560 | $1,200.00 | Straw Bales (Contents of Trailer) (BUYER MUST LOAD) |
| 560A | $0.00 | (7) Assorted Tires |
| 560B | $0.00 | (11) Assorted Tires |
| 560C | $0.00 | (13) Assorted Tires |
| 560D | $110.00 | Contents of Storage Container (BUYER MUST LOAD) |
| 561 | $220.00 | (2) Metal Storage Boxes |
| 562 | $325.00 | Open End and Box End Wrenches |
| 563 | $30.00 | Propane Tanks |
| 564 | $75.00 | Wire Rope Cable and Slings |
| 565 | $12.00 | Rubber Gas Line Guards |
| 566 | $21.00 | Roller Conveyor |