TP Contracting Product Listing - Hunyady Auction Company

1990 CATERPILLAR Model D10N Crawler Tractor, s/n 2YD01385

1990 CATERPILLAR Model D10N Crawler Tractor, s/n 2YD01385, powered by Cat 3412 diesel engine and powershift transmission, equipped with U-blade with twin tilt, 4-barrel, multi shank ripper with (1) shank, s/n 1WH00407, differential steering, ROPS over enclosed cab with heat and air conditioning, and 27.75” SBG pads. In good condition with good undercarriage. (Meter Reads 09,769 Hours) (Less Than 500 Hours on Running Takeout Engine, Which Was Reported to Have 200 Hours on Rebuild) (NEW Batteries)

1988 CATERPILLAR Model D10N Crawler Tractor, s/n 2YD00448

1988 CATERPILLAR Model D10N Crawler Tractor, s/n 2YD00448, powered by Cat 3412 diesel engine and powershift transmission, equipped with U-blade with twin tilt, 4-barrel, single shank ripper, s/n 1XH00247, differential steering, ROPS over enclosed cab with heat and air conditioning, and 27.75” SBG pads. In good condition with good undercarriage. (Meter Reads 39,039 Hours) (Less Than 500 Hours on Rebuilt Engine – Including NEW Crankshaft and Rebuilt Injector Pump) (Less Than 100 Hours on NEW Track Rails) (1,500 Hours on NEW Hydraulic Pump)

2014 CATERPILLAR Model D6K XL Crawler Tractor, s/n WMR00631

2014 CATERPILLAR Model D6K XL Crawler Tractor, s/n WMR00631, powered by Cat diesel engine and push button powershift transmission, equipped with 6-way folding straight blade, joystick steering, drawbar, GPS ready, enclosed ROPS cab with heat and air conditioning, and 22” SBG pads. In good to very good condition with good to very good undercarriage. (Meter Reads 1,445 Hours) (NEW Injector Pump and Supply Pump)

Parts

Parts: D10: UNUSED U-Blade Cutting Edge Set, with corner bits • (3) UNUSED Complete Sprocket Segment Sets and (1) Used Complete Sprocket Segment Set • Track Hardware • U-Blade (Fair Condition) • (2) Lift Cylinders and (1) Tilt Cylinder • (1) Ripper Cylinder • CAT 3412 Running Take Out Diesel Engine • Final Drive Planetary • D6: UNUSED Cutting Edge Set

2003 VOLVO Model A35D, 35 Ton Articulated End Dump, s/n A35DV71083

2003 VOLVO Model A35D, 35 Ton Articulated End Dump, s/n A35DV71083, powered by Volvo 6 cylinder diesel engine and 4 speed automatic transmission, equipped with heated and line bed, enclosed ROPS cab with heat and air conditioning, and 26.5R25 tires. In good condition with good tires. (Meter Reads 18,000 Hours-Owner Supplied – Would Not Display) (Odometer Reads 010,168 Miles) (Bed Relined Approximately 200 Hours Ago)

2000 JOHN DEERE Model 250C, 25 Ton Articulated End Dump, s/n BE250CT00010

2000 JOHN DEERE Model 250C, 25 Ton Articulated End Dump, s/n BE250CT00010, powered by Mercedes 6 cylinder diesel engine and Allison push button automatic transmission, equipped with lined bed, exhaust brake, hydraulic retarder, companion seat, enclosed ROPS cab with heat and air conditioning, and 23.5R25 tires. In good condition with good tires. (Meter Reads 5,889 Hours)

1983 CATERPILLAR Model 637D Tandem Motor Scraper, s/n 27W01671

1983 CATERPILLAR Model 637D Tandem Motor Scraper, s/n 27W01671, powered by Cat 3408 diesel engine front, Cat 3306 diesel engine rear and 8 speed powershift transmission, equipped with rear bale hook/push block, air ride seat, cushion hitch, enclosed ROPS cab with heat and air conditioning, and 37.25×35 tires. In good condition with fair tires. (Meter Reads 08,216 Hours Front and 2,573 Hours Rear

1973 CATERPILLAR Model 637C Tandem Motor Scraper, s/n 65M494

1973 CATERPILLAR Model 637C Tandem Motor Scraper, s/n 65M494, powered by Cat 6 cylinder front and rear and 8 speed powershift transmission, equipped with rear bale hook/push block and enclosed ROPS cab with heat and air conditioning. In fair condition with fair tires. (Meter Reads 06,276 Hours Front)

1978 CATERPILLAR Model 613B Articulated Water Wagon, s/n 38W5122

1978 CATERPILLAR Model 613B Articulated Water Wagon, s/n 38W5122, powered by Cat 3208 diesel engine and powershift transmission, equipped with approximately 5,000 gallon bulk load water body, (2) rear air actuated spray heads, water cannon, ROPS canopy with windshield, and 23.5×25 tires. In good condition with good tires (one poor). (Meter Reads 01,124 Hours)

2013 KOMATSU Model PC160LC-8 Hydraulic Excavator, s/n 25515

2013 KOMATSU Model PC160LC-8 Hydraulic Excavator, s/n 25515, powered by Komastu EC0T3, 6 cylinder diesel engine and hydraulic drive, equipped with 8’6” dipper stick, Lemac 42” digging bucket, JRB hydraulic coupler, auxiliary hydraulics, rearview camera, enclosed ROPS cab with heat and air conditioning, and 23.5” TBG pads. In good condition with good undercarriage. (Meter Reads 04,675 Hours)

2013 JOHN DEERE Model 470G LC Hydraulic Excavator, s/n 470400

2013 JOHN DEERE Model 470G LC Hydraulic Excavator, s/n 470400, powered by JD 6 cylinder diesel engine and hydraulic drive, equipped with 12’6” dipper stick, TAG 60” digging bucket, Esco hydraulic coupler, auxiliary hydraulics, rearview camera, counterweight removal system, pattern changer, heated seat, enclosed ROPS cab with heat, and 35.5” TBG pads. In good condition with good undercarriage. (Meter Reads 6,690 Hours) (Hydraulic Cylinder Rebuild in Progress) (Auxiliary Hydraulic Piping Removed) (Less Than 250 Hours on NEW Injector Pump, Injectors, and Fuel Lines)

Excavator Attachments

Excavator Attachments: Hydraulic Demo Hammer (PC160) • 60” Hydraulic Chain Saw (PC160) • 80” Trapezoidal Bucket (PC160/JD 470) • LEMAC 24” Digging Bucket (PC160) • 88” Cleanup Bucket (PC160)

1999 CATERPILLAR Model 980G Rubber Tired Loader, s/n 2KR03263

1999 CATERPILLAR Model 980G Rubber Tired Loader, s/n 2KR03263, powered by Cat 3406 diesel engine and powershift transmission, equipped with general purpose loader bucket with teeth and weld-on segments, Micro Load 300 bucket scale, fingertip controls, enclosed ROPS cab with heat, and 29.5R25 tires. In good condition with good front and fair rear tires. (Meter Reads 47,268 Hours) (Scale Not Working)

1974 CATERPILLAR Model 988 Rubber Tired Loader, s/n 87A8328

1974 CATERPILLAR Model 988 Rubber Tired Loader, s/n 87A8328, powered by Cat 6 cylinder diesel engine and powershift transmission, equipped with general purpose loader bucket with teeth, enclosed ROPS cab with heat and air conditioning, and 29.5×29 tires. In fair condition with good tires. (Meter Reads 1,134 Hours) (All Side Glass Cracked)

2001 JOHN DEERE Model 648G-III Dual Arch Grapple Skidder, s/n X581539

2001 JOHN DEERE Model 648G-III Dual Arch Grapple Skidder, s/n X581539, powered by JD 6 cylinder diesel engine and powershift transmission, equipped with 7’2” push blade, hydraulic winch, 60” rotating grapple, enclosed ROPS cab with sweeps, heat and air conditioning, and foam filled tires. In good condition with good tires. (Meter Reads 18,504 Hours) (Zero Hours on Reman Engine)

2001 JOHN DEERE Model 310SG, 4×4 Tractor Loader Extend-A-Hoe, s/n 895944

2001 JOHN DEERE Model 310SG, 4×4 Tractor Loader Extend-A-Hoe, s/n 895944, powered by JD 4 cylinder diesel engine and shuttle transmission, equipped with general purpose loader bucket with bolt-on cutting edge, 24” digging bucket, rear auxiliary hydraulics, enclosed ROPS cab with heat and air conditioning, 12.5/80-18 front and 19.5Lx24 rear tires. In good condition with good tires. (Meter Reads 3,758 Hours)

Backhoe Attachments

Backhoe Attachments: JD 36” Digging Bucket (JD 310SG) • JD 12” Digging Bucket (JD 310SG) • Hydraulic Plate Compactor (JD 310SG)

2009 CATERPILLAR Model 279C Crawler Skid Steer Loader, s/n MBT00747

2009 CATERPILLAR Model 279C Crawler Skid Steer Loader, s/n MBT00747, powered by Cat C3.4 diesel engine and 2 speed hydrostatic transmission, equipped with 80” general purpose loader bucket with bolt-on cutting edge, hydraulic coupler, auxiliary hydraulics, rearview camera, enclosed ROPS cab with heat and air conditioning, and 17.5” rubber tracks. In good condition with good tracks. (Meter Reads 2,977 Hours)

41” Fork Attachment (Skid Steer)

1996 BOMAG Model BW172D-2 Vibratory Compactor, s/n 10952012457T

1996 BOMAG Model BW172D-2 Vibratory Compactor, s/n 10952012457T, powered by Deutz 4 cylinder air cooled diesel engine and hydrostatic transmission, equipped with 66” smooth drum, dual frequency vibration, and 14.9×24 tires. In good condition with fair tires. (Meter Reads 04,182 Hours)

WACKER Model RT828 Walk Behind Trench Compactor, s/n 764401217

WACKER Model RT828 Walk Behind Trench Compactor, s/n 764401217, powered by Lombardini 2 cylinder diesel engine and hydrostatic transmission, equipped with 32” split padfoot drum and umbilical remote. In good condition. (Meter Reads 0,078 Hours)

48” Tow Behind Sheepsfoot Compactor

1991 BANDIT Model 1900 Crawler Whole Tree Disc Chipper, s/n 1026

1991 BANDIT Model 1900 Crawler Whole Tree Disc Chipper, s/n 1026, powered by Cummins 855 diesel engine and hydraulic drive, equipped with 8’6” boom, 19” diameter capacity, 18” x 6’ hydraulic rotating grapple, 24” feed rollers, joystick controls, foot travel controls, enclosed ROPS cab with heat and air conditioning, and 20” SBG pads. In good condition with very good undercarriage. (Meter Reads 2,631 Hours In Cab) (Zero Hours on Rebuilt Engine; All Hoses Replaced with Metal Plumbing)

BOWIE Hydro Mulcher Skid Mounted Hydraulic Chain Drive Hydroseeder

BOWIE Hydro Mulcher Skid Mounted Hydraulic Chain Drive Hydroseeder, equipped with 10’ x 6’ tank and 67” frame. In fair condition.

REINCO Model TM730 Skid Mounted Mulcher, s/n 990

REINCO Model TM730 Skid Mounted Mulcher, s/n 990, powered by Wisconsin 4 cylinder, 37HP diesel engine. In good condition.

Silt Sock Auger Attachment

Silt Sock Auger Attachment, equipped with 72” hopper, Lowe 1650CL, 12” hydraulic auger. (Skid Steer)

2009 JOHN DEERE Model 6430, 4×4 Utility Tractor, s/n L06430H619314

2009 JOHN DEERE Model 6430, 4×4 Utility Tractor, s/n L06430H619314, powered by JD 4.5L, 115HP diesel engine and shuttle transmission, equipped with 3-point hitch, PTO, dual hydraulic outlets, (14) front pocketbook counterweights, enclosed ROPS cab with heat and air conditioning, 340/85R28 front and 460/85R38 rear tires. In very good condition with very good tires. (Digital Meter Not Readable)

1956 INTERNATIONAL HARVESTER McCORMICK FARMALL Model 300 Utility Tractor, s/n 26563SJ

1956 INTERNATIONAL HARVESTER McCORMICK FARMALL Model 300 Utility Tractor, s/n 26563SJ, powered by 4 cylinder, 42HP diesel engine and 4 speed transmission, equipped with 3-point hitch, PTO, auxiliary hydraulics, inner and outer rear wheel weights, 6.00×16 front and 13.6×38 rear tires. In good condition with good tires. (Meter Reads 4,318 Hours)

BAILBUSTER 6’ Round Bale Processor

BAILBUSTER 6’ Round Bale Processor, equipped with PTO driven hydraulics, hydraulic bale loader, 6’ slat chain feeder, 3-point hitch mount, and 225/75R15 tires. In fair to good condition.

Subscribe to Email Updates

Wednesday, May 8, 2024 – 9:00AM

Loretto, Pennsylvania